Can POWL work items be executed from Portal???

Hi All,
May any one tell me if POWL work items from any other system (GRC, for example) be executed in Portal?
As of now, the POWL item is visible in Portal. However, it can not be executed and give below error:
Not sure how to troubleshoot this and get these POWL items executed from Portal. Any help on this would be a great help!
Regards,
Faisal

Veera,
Thanks for your reply.
Yes, the respective application in GRC system can be executed from SE80.
Not only that, from NWBC, these types of work items can be successfully executed. The problem is that, the can not be executed from Portal.
Please advise.
Regards,
Faisal

Similar Messages

Error in mail box work item not executable

HI,
i build simple WF for approve and reject that send for user to sap inbox
some decision ,when i check the inbox of the user and double click on the line i get some red triangle in the status Colman with
error work item not executable,
what can be the problem?
Regards

HI Raj,
i build very simple WF ,
user decision , i put there user and approve and reject that it.
i execute the WF and go to the SAP user inbox.
in the Work Flow folder i see the task in column executable i see green V work item executable,
status ready when i double click on it to open i get in column executable message work item not executable ,
and status error ,What it can be?
P.S. i check something like that in other system and i don't get the error .
i start the trace SWELS but in SWEL i just see in the log Trace on trace off nothing more .
Best Regards

Obsolete and batch users can receive work items

Dear Experts,
Currently, we have found a problem that obsolete and batch users can receive work items by manual forwarding from someone. The roles and responsibilities of obsolete users were removed and users have been locked. For Batchuser, it's only created for some certain job with limited roles.
Could you help advise if this's a behavior of workflow or it's from some authorization problem? We have concern for business impact since no one is really handling work items and important messages are out of sight.
Thank you very much in advance.
Regards, Kae

Hello,
This is standard behaviour. It is even possible to send work items to users who do not yet exist (e.g. someone who is due to join the company).
The easiest way to workaround is to set up a substitution for any users that get locked and for background users. Personal substitutes can be maintained directly in table HRUS_D2, you could possibly write your own maintenance transaction for this if it is to be an ongoing issue.
Hope that helps,
Mike
Message was edited by:
Mike Pokraka

How can I work the raw file from Canon 5D MkIII in Photoshop Elements 9?

how can I work the raw file from Canon 5D MkIII in Photoshop Elements 9?

You can download the 7.1 DNG converter to make copies of your canon raw files in the adobe dng format, which can then be opened in pse 9.
As said above the the latest camera raw plugin 6.5 for pse 9 won't open those files directly, but will open the the converted dng files.
windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5389
mac:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5388

Error when executing a work item (cannot execute a method, biding problem?)

Hello,
I created a specific workflow, triggered by an event, from a class I also created.
From this event, I get some data about a Document (CV01/02/03N...).
The first step is a task which refer to a method (from the same class above).
The binding Task <=> Method is the data about the Document and the Workflow ID.
After I start the workflow, I execute the work item in SWI1, with a breakpoint in the method.
I can't go in debug, and the work item is in error (in Workflow log) :
- "Work item 000000590208: Object ZCL_SA3_WF_GED_RECL_FOURN method UPDATE_FID cannot be executed"
- "EXECUTE_METHOD_OBJECT_SYNC : Dereferencing of the NULL reference".
Note: The task is not in background processing, in the aim of debugging the source code.
I did SWU_OBUF and quit/relog SAP.
Do you have any ideas to solve this problem ?
I think it's a biding problem, because I can' t even go in debug mode...
Thanks.
Regards
(sap version: ECC 6.0)

Hi
Looking at the error message I feel like there is something wrong in the task object and object method. You are using a class in the task make sure that class has the IF_WORKFLOW. Mak sure the task is enabled with synchronous task method check box.
Regards
Pavan

How can I call a LabVIEW executable from within another LabVIEW executable?

I have a customer requirement for two LabVIEW executables. Based on their current setup, they need to run executable "A" or "B", both of which are under independent revision control. I have created a third "selection" executable that allows the operator to choose between one of the two, but I am receiving errors when I attempt to call a LabVIEW executable from within a LabVIEW executable using either the "System exec" VI or the "Run Application" VI. If I call a non-LabVIEW executable (such as Windows Explorer) everything works fine.

> I have a customer requirement for two LabVIEW executables. Based on
> their current setup, they need to run executable "A" or "B", both of
> which are under independent revision control. I have created a third
> "selection" executable that allows the operator to choose between one
> of the two, but I am receiving errors when I attempt to call a LabVIEW
> executable from within a LabVIEW executable using either the "System
> exec" VI or the "Run Application" VI. If I call a non-LabVIEW
> executable (such as Windows Explorer) everything works fine.
As with the other poster, I suspect a path problem. You might try the
path out in a shell window, and if it works, copy the complete absolute
path to LV to see if that works. LV is basically passing the comma
nd to
the OS and doesn't even know what is in it, so you should be able to get
it to work.
The other poster commented on subpanels, which is a good suggestion, but
without going to LV7, an EXE can have open more than one VI. You can
use the VI Server and the Run method to fire up another top-level VI.
The decision is whether you want both to be in unique processes.
Greg McKaskle

Personalise value icon not available when query executed from portal

Hi
The personalise value icon is not available when the query is executed from the portal.
Is this the norm or is there anything i must change?
Regards
Shalini

Since you have not given us much information to go on, I will start with the basics...
Have you activated the Personalization DSOs (0PERS_WTE, 0PERS_BOD & 0PERS_VAR)?
If not, you will need to do so in tcode SPRO (SAP Reference IMG --> SAP NetWeaver --> Business Intelligence --> Settings for Reporting and Analysis --> General Settings for Reporting and Analysis --> Activate Personalization in BEx)
Are you running a BW 3.5 query or a BI 7.0 query?
If BI 7.0, the way to set personalization values has changed. You have to open the personalization section of the variables refresh screen by clicking on "Show Personalization Values" at the top of the screen, then move the desired variables down to that section.
Hope some of this helps...
Bob

Can one work item drive another work item.

Lets say I have two distinct bug tracking work items in tfs 2013. Would I be able to have one work item drive another... for example
if I create a defect in work item a, it will create a copy of it in work item b.
if I update the status of defect in work item a, it will update the status in work item b.
etc...
Thx.
Saba

Hi Saba,
As far as I know, seems it's unavailable to get a copy of it in another work item automatically.
Generally, you can associate the created defect with two work items(add links to the defect for the two work items). Another option is open the first work item after adding the defect to it in team web access, then click button of "Create a copy
of this work item" to get a copy of the work item.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I delete items in trash from an external hard drive?

I have a Macbook Pro and have installed Paragon so that I can use an external hard drive on both my Mac and my PC. But some files I deleted from my external hard drive (Seagate 3TB) while on my Mac can't be deleted from the recycle bin.
When I try to delete, the files just stay there. When I do a secure empty, a message comes up saying the files are in use. This has persisted for two days. I have restarted the Mac, reconnected the drive, and also cheked the drive on my PC for errors and found none. Of course, the files only appear in the trash when the drive is connected. I ejected the drive properly each time, and didn't just unplug it from the Mac.
I have tried to do a secure empty with option and/or shift keys down, but I still get a message that the files are in use. I tried a fix involving writing a command including the term "trash" (I don't have the full command at my fingertips) in Terminal in the Utilities application, and this did not work. There appears to be a program called "Trashit" which might help, but my computer says it will not open under my security settings because the author of the program is not listed.
The files remaining in trash are part of an old iTunes library that I wanted fully deleted from my external hard drive and my trash. It was a big file (over 200GB) and about 99% deleted and empltied. Reformatting the drive should not be necessary, might not help, and would probably erase the drivers on the drive and ruin it anyway.
I'm wondering what is happening, and how I could fix it. Many thanks for any advice, in advance.

I actually fixed this by plugging the drive into my PC, changing the settings to "show hidden files and folders," then finding the folder ".trashes" on the drive and deleting everything in there. When the drive was plugged back into the Mac, the trash was empty as it should be. (It was a very large folder I deleted, and a very small portion of the files were apparently corrupted.) In case anyone else ever needs this fix, it works. Good luck.

Can the role info be passed from portal to ABAP web dynpro application

Hi,
We have some roles in the portal. We call the ABAP web dynpro applications from the portal. Is it possible to pass on the role from the portal to the Web dynpro ABAP application so that we can use this role information in the application.
Thanks,
Pooja

Hi,
you can try to add the expression
role=<IView.PCDUnit>
as part of the Application Parameters in the iView. This will be the role in 99%. However not all iViews started in the Portal must belong to a role. You can start iViews using page navigation that are not part of a role. Therefore the PCD does not talk about roles but about "units" which is the superordinate term.
the value will be the PCD path of the role - e.g:
portal_content/myFolder/roles/myRole

How can I work with FCPX away from base?

I have to go away and would like to at least do some keywording on a large amount of clips I have imported on to an external 1TB forewired drive (which I would prefer not to take with meif possible)
All my FCPX so far is on my iMac so - is it possibe to transfer anything to my MacBook Pro to take with me and work on that?
If so what do I ned to trasnfer from my iMac? Do I then need to take the external drive with me - even to do keywording>
I cannot find this in the manual - but, I am sure I saw a refernce to this somewhere
thanks

The events library and project library are on whatever drive they're on.
When you first launch FCP an events folder is created in your Movis folder. If you make a new project it might be created in a projects folder in Movies as well.
If the entire content, media and project, are on the external drive, then there is nothing from the iMac that you need. Connect the FW drive to the MBP, launch the application, and it will read the events and projects folders on that drive and never create an events folder on the MBP. If you launch FCP without the drive, it will create an empty event, in an Events folder, in Movies, on the MBP as the application always has to have one event at least to work with.
You can work with events in the organizational stage without ever even making or opening a project or making a projects folder on any drive.

How can I work on a document from both work and home when....?

I have CS4 for the Mac at home and CS5 for Windows on my work computer? I keep the work on a cloud server and need to be able to access it and work on it from either location. Any Ideas?

[email protected] wrote:
I have CS4 for the Mac at home and CS5 for Windows on my work computer? I keep the work on a cloud server and need to be able to access it and work on it from either location. Any Ideas?
Does this help?
2.5 Portable or Home Computer Use. Subject to the important restrictions set forth in Section 2.6, the
primary user of the Computer on which the Software is installed under Section 2.2 (“Primary User”) may
install a second copy of the Software for his or her exclusive use on either a portable Computer or a
Computer located at his or her home, provided that the Software on the portable or home Computer is not
used at the same time as the Software on the primary Computer.
From: http://www.adobe.com/products/eulas/pdfs/gen_wwcombined_20091001_1604.pdf
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Very urgent..Can a batch file be executed from a button in application?

HI!
Please this is very urgent..
I want to know wheather it is possible to provide a button in an htmldb application,
that executes a batch(dos .bat file) file from a network location????
Thanks
Asit.
Message was edited by:
user459887

It will be possible to do that but I suggest you search the HTML DB Forum first and place your question there rather than in this forum .
Greg

How can I work with WindowsAccessBridge.dll from VB6?

Hi,
I have one java application(e.g JAlbum). Whenever I start that application it promt to enter username and password.
Now what I want to do is?
I want to get that both text boxs values and set some values of that text boxes with my VB 6.0 code.
I have found that with help of WindowsAccessBridge.dll we can do something which I want. But they didn't provide any example source code in VB 6.0.
Can anybody help me that how can I get content of Java Application. How can I use WindowsAccessBridge.dll in my VB project. I can do it for windows application by using IAccesible. But I don't know that how can i do it for Java with WindowsAccessBridge.dll.
Please provide me some proper steps to work with WindowsAccessBridge.dll in VB 6.0.
Please help me as soon as possible. If possible please provide me some source code in vb 6 or links.
Thanks in advance.

Hi Peter,
Thanks for your reply.
I have developed it using VB 6.0. Please check the below code.
'' General Declaration
Option Explicit
Private Declare Function isJavaWindow Lib "WindowsAccessBridge" (Hwnd As Long) As Boolean
Private Declare Function FreeLibrary Lib "kernel32" (ByVal hLibModule As Long) As Long
Private Declare Function LoadLibrary Lib "kernel32" Alias "LoadLibraryA" (ByVal lpLibFileName As String) As Long
Private Declare Function FindWindowEx Lib "user32" Alias "FindWindowExA" (ByVal hwnd1 As Long, ByVal hWnd2 As Long, ByVal lpsz1 As String, ByVal lpsz2 As String) As Long
Private Declare Function FindWindow _
                Lib "user32.dll" _
                Alias "FindWindowA" (ByVal lpClassName As String, _
                                     ByVal lpWindowName As String) As Long
Private Sub Form_Load()
Dim Var_g_HwndRec As Long
Dim lb As Long
Var_g_HwndRec = FindWindow(vbNullString, "CI for a proportion")
lb = LoadLibrary("WindowsAccessBridge")
MsgBox isJavaWindow(Var_g_HwndRec)
End SubAt the time when I ran this program I got an runtime error "49', bad DLL calling convention.
Can you please tell me that what could be the problem?

Can I work in ID CS3 from version 4?

I am a student and currently have CS2, I am looking to upgrade to CS4. I have to go to CS4 because I can no longer get CS3 at a student price, however everyone I work with and the university mac labs all still use CS3.
I understand when using InDesign, CS4 files may not work in CS3; so can I build files in a CS3 format even though I will be using CS4?
Also, will my current files that were created in CS2 transfer over to CS4?
Sheesh, you'd think Adobe would make all their new programs compatible with the old ones!

>so can I build files in a CS3 format even though I will be using CS4?
you can build CS4 files that can be exported as INX. that CS3 can open. The only drawback is any feature that only CS4 has will be mangled by CS3.
>will my current files that were created in CS2 transfer over to CS4?
Yes
>Sheesh, you'd think Adobe would make all their new programs compatible with the old ones!
with that logic they wouldn't need to make a new version as its the new features that prevent true version compatibility

Can POWL work items be executed from Portal???

Similar Messages

Maybe you are looking for