Can Premiere CC Recognize In-Camera Speed Changes ('Ramps')?

I am editing a project shot in 6K with a Red Dragon. We recorded a number of shots with speed changes ('ramps') triggered at specific times IN-CAMERA during the course of the shot. Premiere CC does not seem to recognize the changes - and only plays the clips back at the slower rate. Is there a way to get these ramps back?
Also - on a more basic level, is it possible for Premiere to interpret the relative frame rate of off-speed clips in any kind of specific way? In the project media window, everything displays at the frame rate i've set for the project (23.976) regardless of the frame rate at which a clip was recorded.
Any help is appreciated.
Ryan W.

I thought the idea of a camera ramp was to keep the playback at a set rate so that the motion smoothly went to slow-mo as the camera fps increased. You can interpret the footage to any fps you want, you will get that option if you right click the footage in the project panel.

Similar Messages

What speed change/ramp plug in?

Need to speed ramp up & down a shot and know there's couple of plug in's out there. Any favorites?
Or better to do in After Efx?
Thanks,
p2

Definitely in After Effects... I personally like Twixtor for time remapping.

Premiere won't recognize my camera (Can't activate recorder. Try resetting camera.)

Ok I have a very perplexing situation. I have been doing video editing for years but this is a new one for me. I just got a new Windows 7 PC (64 bit) I7-8GB RAM Lenovo system. I just installed Premiere CS5.5 on it and installed a new SIIG firewire card. I have a Sony Mini-DV camercorder that works great and have been exporting with firewire on my previous 3 systems with no problem (last system was Win 7 64bit as well). On this system I attach the camera via firewire cable and Windows instantly recognizes the camera and the general dialog box comes up asking me if I would like to capture video with Adobe Premiere, Cyberlink PowerDirector, or Windows Live Photo Gallery. Both PowerDirector and Windows Photo Gallery I can open and capture video with no problems. However if I open Premiere in anyway (in DV mode) and bring up the capture window while the camera is on I get the message: "Can't activate recorder. Try resetting camera." If I switch the camera off while the capture window is up it then switches to the message "Capture device offline".
So it seems the firewire card, camera are fine, but giving Premiere fits for some reason. Side notes, I also have a Sony FX-1 HD camera which I can connect with the same firewire cable and inside Premiere and it will capture video but will not display it while capturing (I read this is common with High Def video though). I also have disabled the Windows firewall as I read about in other threads. I have tried 2 other firewire cards with the same exact results. The mini-DV camera I'm trying to get Premiere to capture with is a Sony DCR-PC9 and I have used it in my last 3 systems all running Windows and Premiere. This is really frustating.
Any tips and or advice would be greatly appreciated!
Thank you, Kirk

Not Harm, but...
SD capture http://windv.mourek.cz/ or http://www.scenalyzer.com/main.html or http://www.exsate.com/products/dvcapture/
Do note that the demo version of ScenalyzerLive puts a watermark in the files it creates
- I'm told that the OLD version of Scenalyzer is freeware... check the download page for details
Try this for HDV capture http://strony.aster.pl/paviko/hdvsplit.htm

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place."
When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
I have no other options to choose another font. Thanks for any help you can direct my way.
Debbie
From: sukritd15 <[email protected]>
To: Deborah Karr <[email protected]>
Sent: Friday, February 13, 2015 5:35 AM
Subject: While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

IPhoto suddenly doesn't seem to recognize my camera, and essentially freezes. The only thing that makes sense is that another person in my house imported using a different camera and that changed things somehow. Ideas?

iPhoto suddenly doesn't seem to recognize my camera, and essentially freezes. The only thing that makes sense is that another person in my house imported using a different camera and that changed things somehow. Ideas?

Hi There!
The camera is a Panasonic Lumix. I don't have a USB card reader. I did try and different port although not a different cable.
I did remember one additional thing. I plugged my camera in at work to a PC. It was after that, when I came home, that the iPhoto wasn't working when I connected my camera to our iMac/iPhoto at home. I think this may have caused the problem.
Cheers!

Help! I installed the wrong firmware and now can't access the camera to change it back!

I have done something silly and wonder if you can help to get me out of a fix. Yesterday I upgraded the firmware of my camera and I can no longer see the camera on the network, even when it is connected by a wired connection. I have tried a hard reset but that has not helped.
I now realise that I have upgraded with firmware via a link from the US website and it is a different firmware version to the UK site. It is also designated as a RoSh version (although I do not understand the significance of this). Presumably US networks are set up differently to EU ones?
I upgraded the firmware from version 1.10 to version 1.25 (RoSh). The European firmware upgrade is designated as version 1.21.
The only way forward that I can see is to find a network that will recognise the camera and then change the firmware back to the European one. Any ideas?

Whats the Model number of your Camera. As you have uploaded the wrong firmware of your Camera. I think you can download the Latest firmware from the European website and upgrade the firmware of your Camera using TFTP tool utility.
Go to ftp.linksys.com/pub/network... and download TFTP.exe File on your computer. Once done connect your camera to the Computer and provide a Static IP to your computer.
Double click the tftp.exe file and click run :
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.115...
For Password- Enter the password you assigned the camera. By default, the camera’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your camera, wait for 30 seconds and re-connect the power cable...Now re-configure your camera...

Bridge wont recognizw my Nikon d610. I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in. How can I get bridge to recognize my camera? Thanks to anyone who can help!!

Bridge wont recognizw my Nikon d610. I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in. How can I get bridge to recognize my camera? Thanks!!

That camera model has been supported since ACR 8.3 and it is most certainly supported by ACR 8.6 and ACR 8.7 (beta).
Either you have damaged, corrupt image files, or a faulty Photoshop and/or ACR installation.
If there are no privacy issues, you can post one of your files to the FTP service of your choice (such as Dropbox or yousendit.com), post the link to it, and someone here can take a look at it for you.

Lightroom doesn't recognize mine camera Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me?

Lightroom doesn't recognize mine camera, the Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me with this issue?
Ronald ( the Netherlands)

Sure the laptop know's that the Nikon D800E is connected, but lightroom doesn't recognise this camera. Two weeks a go it wasn't a problem at all.

Timeline moving when I make a Speed change!! Can this change?!?

As I'm sure everyone is aware, when you change the Speed of a clip to either slow it down or speed it up the entire rest of the time changes with it. For example, if I speed up a clip I am editing at the beginning of my sequence every clip after it moves forward on the timeline to affect my speed change. This is VERY annoying because it means that when you go back to adjust the speed of a certain clip and you have cliped placed after it (that need to stay where they are) ALL OF THEM MOVE. Does anybody know of a setting or perference where this can be changed.....? Please, I'm desperate!

This is the way it works, and you need to adjust your workflow around it. If it didn't work this way, if you sped up the shot, you'd have a hole, and if you slowed it down, it'd overwrite your footage after it. It adjusts the section it is in because that is how it is designed. Don't like it, do things differently.
1) load the clip in the viewer and slow it there first, THEN cut it in the timeline.
2) drop the clip at the tail of the sequence, double click on it, then adjust it, then move it to where you want.
#1 is the way to go...and is the way FCP was designed to work. It is just something you have to get used to.
Shane

Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?

Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?

The latest version of iPhoto which can operation with OS X 10.4.11 is iPhoto 7 which is part of iLife 08. You might be able to find a copy of iLIfe 08 on Amazon.com or Ebay.com.
iLife 08's full system requirements are:
Mac computer with an Intel, PowerPC G5, or PowerPC G4 processor
iMovie ’08 requires a Mac computer with an Intel processor, a Power Mac G5 (dual 2.0 GHz or faster), or an iMac G5 (1.9 GHz or faster)
iDVD ’08 requires 733MHz or faster processor
512 MB of RAM; 1 GB recommended; high-definition video requires at least 1 GB of RAM
3 GB of available disk space
DVD drive required for installation
From: http://support.apple.com/kb/HT1010
OT

Hi, The computer in my MacBook Pro 10.6.8 isn't showing up in Skype (the indicator light doesn't show and it doesn't show in Skype preferences). Also Photo Booth doesn't recognize a camera. What can I check for please?

Hi, The computer in my MacBook Pro 10.6.8 isn't showing up in Skype (the indicator light doesn't show and it doesn't show in Skype preferences). Also Photo Booth doesn't recognize a camera. What can I check for please?

Hi Lee again..
Please do not startup duplicate topics. I responded to you here > Hi, The camera in my MacBook Pro 10.6.8...: Apple Support Communities
Sometimes navigating the forums can be difficult.. we understand that.

Can't get Final Cut to recognize my camera.

I have a Canon VIXIA HF11 High def video camera and I can't get Final Cut Pro to recognize it. I don't have a firewire connection on the camera. It is a USB 2.0. I assume this is the root of the problem. iMovie recognizes the camera and imports the files. Does anyone know of a way to get the files into Final Cut? Thanks!

Might I suggest a training DVD
http://www.classondemand.net/media/final-cut-training/fcp7.aspx
This is an AVCHD camera. You need to use the log and transfer function with the correct settings. You should not use iMovie for capture as it captures in an older codec that's not very good. In FCP7 you can capture in ProRes or ProRes LT, both of which are superior.
I stand to profit from this message.

Software issue, computer can't recognize Canon camera

First time poster...
Running Vista 64-bit on a brand new computer... purchased a Blackerry Bold. Everything was running fine on the computer until I installed Blackberry software. Software stopped running... didn't do much anyway. When I installed Blackberry software, I noticed it also did some stuffwith Roxio.
I did an uninstall with windows only for the Blackberry... and didn't manually pull any stuff out of the registry.
I now have a computer that now won't recognize my Canon digital camera.
I uninstalled and reinstalled the Canon Zoom Browser... and tried various restore points for Vista that failed (just before I installed the Blackberry software). Notice on the restore registry the date software was installed, seperate entry for Roxio, and an uninstall for Roxio only. Did not notice an uninstall for Blackeberry... however it is nowhere to be found.
Anyone know a fix for the computer to recognize the camera again?
Thanks,
Richard

Bruce Illingworth wrote:
New Macbook Air. Used migration from a Powerbook G4 that had 10.5.2 installed on it. I now can't launch my Canon CameraWindow software - I get "No camera attached." I also can't get ImageCapture to work. IC will open and seem to download the photos to the desktop but they don't appear on the desktop. I can't find them anywhere. Both software apps work fine on the G4 and also on my regular MacBook. The ImageCapture sees the camera and even tells me how many photos are on it. System Profile sees the Canon attached to the USB.
Be sure your Canon software runs on Intel platforms. You were using a PPC before. Most, if not all PPC software is not Leopard compatible. You need all new apps for these things when you run an Intel-based system.

Can software instruments recognize MIDI program changes?

I'm trying to send program changes from my Oxygen 49 (blue). I see them register in the transport window in Logic but the patch doesn't change. For example, trying to scroll through different instruments in the sampler would be much faster than having to use the mouse if I could use the + & - buttons on the Oxygen.
All other control surface functions work fine using M-Audio DirectLink—transport, faders, track selection, etc. But not program changes. Any info would be appreciated. I've contacted M-Audio support but they were not helpful--horrible phone support.

brewbaker wrote:
I'm trying to send program changes from my Oxygen 49 (blue). I see them register in the transport window in Logic but the patch doesn't change. For example, trying to scroll through different instruments in the sampler would be much faster than having to use the mouse if I could use the + & - buttons on the Oxygen.
Most (if not all) of Logic's plugins do NOT receive program changes, the EXS24II can be setup to use two program changes as a toggle for "Next Instrument" and "Previous Instrument". Set Next Instrument to Prg change 1, Set Next Instrument to Prg change 2.
This way you can select Prg change 1 to select the next instrument, then go back to Prg change 00 on the Oxy49, select PG change 1 again to go to the next instrument.
And so on...
Use the EXS "Options" button, then select Preferences to set this up.
pancenter-

Can't import photos from camera -"Insufficient disk space on volume"?

Please excuse my ignorance if there is a fix for this that I haven't found here.... I reinstalled iLife '11 yesterday because iPhoto would not recognize the camera. Now it recognizes the camera but it won't import the photos. I've tried all the suggestions, trashed the cache, the preference file, restarted, created a new library and I still can't import the photos from the camera to iPhoto because it says "insufficient disk space on volume." I have plenty of space on my hard drive. I can import through Image Capture but why go the extra step when importing to iPhoto was so very easy before? Can anyone help with this?

This has been reported - not sure if there ever was a solution or not - search the forums to find the threads
you can try renewing the iPhoto preference file to see if that helps -
A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
LN

Can Premiere CC Recognize In-Camera Speed Changes ('Ramps')?

Similar Messages

Maybe you are looking for