Can Premiere Mac 6.5 be upgraed to Mac Intel?

It's time I need to move to Apple Intel Land Mt.Lion from my G5 - Tiger platform.  I am still using Premiere 6.5 for Mac OS, but as soon as I move to Mac Mini 2012, I'm out of business since that Apple is Intel.
Is there a way I can purchase an upgrade from Premiere 6.5 to CS5, though I am going from Mac Tiger to Mac Mini 2012 Intel?
Message was edited by: Patt/Trish
Message was edited by: Patt/Trish

>upgrade to CS4 or even CS5?
The current version is CS6, so it is not possible to upgrade to anything older
Also, be VERY careful with buying old software on eBay... there are MANY fakes and/or hacked versions
Another option is to take a college class and, when you have a student ID to prove your status, buy the education version
Adobe Education
http://www.adobe.com/education/students/studentteacherlicensing/school_listing.html
http://www.adobe.com/education/students/studentteacheredition/eligibility.html
All sites below require proof of Education status, per Adobe licensing
Buy at http://www.studica.com/ or https://www.academicsuperstore.com/
-or JourneyEd http://forums.adobe.com/thread/1074416
May NOT resell http://forums.adobe.com/thread/896145
- http://forums.adobe.com/thread/934410

Similar Messages

  • Need Adobe Premiere Mac post from summer 2000

    Hi,
    I know this must sound crazy, but I need to find a needle in a haystack -- in the summer of 2000 I posted on the Adobe Premiere Mac forums - it was a method of remapping the keyboard in Premiere 5.1c.  I'm pretty sure my screen name was "Graham Jones" -- I had over 600 posts.  It's possible it was "GrahamAJones" but I don't think so.
    Does anyone know how I can retrieve a copy of that post and/or thread?  I'm hoping someone saved the archive.
    If it helps in searching, it talked about modifying the "keyboard.txt" file.
    It's a long story, but I need evidence of that post for my green card application, and I am stumped without it.
    Thanks,
    Graham Jones.

    slight chance, I suppose, I don't know how far back their archives go:
    http://www.archive.org/web/web.php
    added:
    About the Wayback Machine
    Browse through over 150 billion web pages archived from 1996 to a few months ago. To start surfing the Wayback, type in the web address of a site or page where you would like to start, and press enter. Then select from the archived dates available. The resulting pages point to other archived pages at as close a date as possible. Keyword searching is not currently supported.

  • Can I install an internal hard drive in i-mac intel 17" ?

    Where can I get an internal hard drive compatible for intel i-mac? I need a larger hard drive, like 250gb or something. Can I install it myself?

    You can go to a apple service center like CompUSA and have them install one for you. If you buy the drive from them, they will install it for free, otherwise it is like a 40 dollar charge. DO NOT attempt to install it yourself, not only will you void your warranty, the intel iMac is very difficult to open and work on and you will probably break something.
    Glor

  • Can a Mac Pro (2.66 ghz duel core) be upgradable to support Thunderbolt displays and other devices.

    Can a Mac Pro (2.66 ghz duel core (4cores)) be upgradable to support Thunderbolt displays and other devices. Does this need to be done through the Graphics card expansion or a additional card to be inserted?

    No. There is no way to upgrade any Mac Pro older then the cylindrical 2013 Mac Pro to ThunderBolt.
    The requirements of Thunderbolt require a totally redesigned motherboard and chip set rather any plugin cards. These motherboard were never developed for older Mac Pros.

  • Can a Mac mini support video to two 30" apple studio displays?

    Can a Mac mini support video to two 30" apple studio displays at the same time? If so, how do you do it and what resolution can be acheived for each monitor?

    Hi Brian,
    Nope, or not very well...
    Display Support:
    Dual Displays
    Resolution Support:
    1920x1200*
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).

  • IPhone no longer can sync with iTunes on Mac Intel Mini

    I have an original iPhone (not 3G). It was working fine until today. Today when I booted my mac mini, Software update said that there was an iTunes update. I downloaded and installed version 8.2 of iTunes. When I connected my iPhone to my mac mini (Intel running 10.4.11), which is what I use to sync my iPhone, iTunes didn't see it. It was as if the iPhone wasn't connected to the mac.
    I thought maybe it was the cable. So, I switched cables. It still didn't sync (or even see the iPhone).
    I have been charging my iPhone using a wall adapter, so I tried both cables with the wall adapter. The iPhone charged just fine using both cables.
    I used the cables and tried to sync my iPod Classic (120GB) with iTunes. I can sync my iPod Classic with iTunes just fine with either cable.
    I have an 17" Powerbook G4 running 10.5.7 and I thought I'd try to see if it could see the iPhone. The Powerbook is running iTunes 8.1.1, I haven't upgraded it yet. I was able to see the iPhone and I could try to sync, but the iPhone isn't sync'ed with that iTunes library so the sync doesn't do anything, but at least the Powerbook sees the iPhone and connects with it (and iTunes sees the iPhone as well).
    I'm upgrading to iTunes 8.2 to see if the Powerbook can still see the iPhone (just seeing if it was the iTunes upgrade that broke the iPhone sync). Well, the upgrade on the powerbook didn't seem to hurt its ability to see the iPhone.
    I'm back at square one. My mac Intel mini running 10.4.11 can't see my iPhone and nothing I do seems to help it see the iPhone, but I can sync my ipod classic using the same cable.
    I'm now wondering if there is something wrong with the iPhone. Has anyone else seen this problem?

    Sometimes a glitch can happen with an itunes upgrade that can cause itunes to no longer recognize your iphone. If you have already tried to restart your computer and tried different usb ports, I would try this:
    http://support.apple.com/kb/HT1224?viewlocale=en_US
    Hope it helps
    Your only removing the outer software so it shouldn't affect your itunes libraries or files.

  • So Can My Mac Be Made To Work With iChatAV ?  Version three

    < to be be removed later.
    This is a Update to an Existing FAQ <a class="jive-link-external-small" href="http://">http://discussions.apple.com/thread.jspa?threadID=121851
    The expectation is that it will be editted into that item, less the header >
    So Can My Mac Be Made To Work With iChatAV ?
    This question is asked by many who find their computer is below the G3/600Mghz Specs limit set for iChat
    See here in the second table top left box the listing of the G3/600
    Please note there are different Specs for Audio and Video chat.
    This linked Apple Doc has been re-written several times since it originally cam out that it does not quite carry the same help as it once did
    It is presumed that you are going to want to take as much advantage of iChat as you can. So I will talk about Video chatting.
    For Jaguar (10.2.5 - 10.2.8)
    Prior to the beginning of Oct 2004 there was a Jaguar version of iChat AV on sale at the Apple Store as a download. If you are at 10.2.5 - 10.2.8 and downloaded the $29.95 Version 2.0 of iChat for Jaguar, in preperation of using iChat, before this date, you may find some of this information useful.
    The WWDC Anouncement
    If you did not buy it, your only option is to upgrade to Panther.
    For Panther (10.3.x) and Jaguar (10.2.5 -10.2.8)
    IF you fall below the G3/600 mark then you will need this utility, iChatUSBCam from Ecamm.com This will enable the external iSight to work at lower spec machines. The current reported lower limit is around the G3/350Mhz mark.
    It is also will enable USB cameras for use with iChatAV, but there is little in the way of substantive information about Sub G3/600 computers achieving this.
    There have been about a dozen posts to say that it will use a USB cam on a G3 as low as 400Mgz
    It should be noted that computers of this age tend to lack Multi-Tasking and will find that iChat will take up most of their processor time.
    iChat AV FAQ folder
    iSight FAQ Search
    This is a link to the drivers already installed in the Mac OS. The download is not required. *See note below
    Apple used to list the DV camcorders that work with the drivers already in the Mac OS but now Apple no longer does so (Link removed from this section). *See note below.
    Essentially any Firewire camera will work with the OS. Some MiniDV formats can not be seen by iChat though.
    Many USB Webcams will work if you are at 10.4.8 or earlier or only UBS 1.1 ports. This will need the Mac Drivers and the IChatUSBCam utility.
    *Note: Both these last two lists were updated Jan 2004 or before. The purpose of pointing this out to highlight the fact that new cameras have come on the market since. They may work with these drivers or have their own Mac Firewire drivers on their accompanying install CDs.
    The Current list for Firewire Webcams is now here as linked above.
    For Tiger (10.4) and up.
    Much of what has been said before applies to you as well. Most firewire web cams will work DV Camcorder will work. USB cameras can work with the correct Mac Driver and the iChatUSBCam utility.
    However....
    10.4.9 now adds a driver for USB Video Class (UCV) web cams that will work with the OS and iChat. Not all USB video cams are of this type and iChatUSBCam is still needed.
    Mulit-Video Chatting
    This was added to iChat at iChat 3 in Tiger (10.4.x)
    As can be seen from the Specs linked earlier you need a Mac over a certain Spec (G4/1Ghz Dual) to be able to Host Video chats. (plus Internet Speed).
    Ecamm come to people rescue again with PowerBoost if your Mac does not reach those specs.
    Leopard 10.5
    In Leopard the criteria is also for a mac of a certain spec before you even start, This is a G4/867Mghz processor. If you have problems then see this Apple Doc There is also some evidence that this helps other macs with the same message even if not this spec machine.
    This is the 3rd version of this tip. It was submitted on 5/1/08 by Ralph Johns (UK).
    10:09 PM Saturday; January 5, 2008

    < to be be removed later.
    This is a Update to an Existing FAQ <a class="jive-link-external-small" href="http://">http://discussions.apple.com/thread.jspa?threadID=121851
    The expectation is that it will be editted into that item, less the header >
    So Can My Mac Be Made To Work With iChatAV ?
    This question is asked by many who find their computer is below the G3/600Mghz Specs limit set for iChat
    See here in the second table top left box the listing of the G3/600
    Please note there are different Specs for Audio and Video chat.
    This linked Apple Doc has been re-written several times since it originally cam out that it does not quite carry the same help as it once did
    It is presumed that you are going to want to take as much advantage of iChat as you can. So I will talk about Video chatting.
    For Jaguar (10.2.5 - 10.2.8)
    Prior to the beginning of Oct 2004 there was a Jaguar version of iChat AV on sale at the Apple Store as a download. If you are at 10.2.5 - 10.2.8 and downloaded the $29.95 Version 2.0 of iChat for Jaguar, in preperation of using iChat, before this date, you may find some of this information useful.
    The WWDC Anouncement
    If you did not buy it, your only option is to upgrade to Panther.
    For Panther (10.3.x) and Jaguar (10.2.5 -10.2.8)
    IF you fall below the G3/600 mark then you will need this utility, iChatUSBCam from Ecamm.com This will enable the external iSight to work at lower spec machines. The current reported lower limit is around the G3/350Mhz mark.
    It is also will enable USB cameras for use with iChatAV, but there is little in the way of substantive information about Sub G3/600 computers achieving this.
    There have been about a dozen posts to say that it will use a USB cam on a G3 as low as 400Mgz
    It should be noted that computers of this age tend to lack Multi-Tasking and will find that iChat will take up most of their processor time.
    iChat AV FAQ folder
    iSight FAQ Search
    This is a link to the drivers already installed in the Mac OS. The download is not required. *See note below
    Apple used to list the DV camcorders that work with the drivers already in the Mac OS but now Apple no longer does so (Link removed from this section). *See note below.
    Essentially any Firewire camera will work with the OS. Some MiniDV formats can not be seen by iChat though.
    Many USB Webcams will work if you are at 10.4.8 or earlier or only UBS 1.1 ports. This will need the Mac Drivers and the IChatUSBCam utility.
    *Note: Both these last two lists were updated Jan 2004 or before. The purpose of pointing this out to highlight the fact that new cameras have come on the market since. They may work with these drivers or have their own Mac Firewire drivers on their accompanying install CDs.
    The Current list for Firewire Webcams is now here as linked above.
    For Tiger (10.4) and up.
    Much of what has been said before applies to you as well. Most firewire web cams will work DV Camcorder will work. USB cameras can work with the correct Mac Driver and the iChatUSBCam utility.
    However....
    10.4.9 now adds a driver for USB Video Class (UCV) web cams that will work with the OS and iChat. Not all USB video cams are of this type and iChatUSBCam is still needed.
    Mulit-Video Chatting
    This was added to iChat at iChat 3 in Tiger (10.4.x)
    As can be seen from the Specs linked earlier you need a Mac over a certain Spec (G4/1Ghz Dual) to be able to Host Video chats. (plus Internet Speed).
    Ecamm come to people rescue again with PowerBoost if your Mac does not reach those specs.
    Leopard 10.5
    In Leopard the criteria is also for a mac of a certain spec before you even start, This is a G4/867Mghz processor. If you have problems then see this Apple Doc There is also some evidence that this helps other macs with the same message even if not this spec machine.
    This is the 3rd version of this tip. It was submitted on 5/1/08 by Ralph Johns (UK).
    10:09 PM Saturday; January 5, 2008

  • Can the mac air print to HP OfficeJet Pro 8600 Plus Wireless e-All-in-One?

    Can the mac air print to HP OfficeJet Pro 8600 plus Wireless e-all-in-one?

    AirPrint is an iOS 5 protocol.  It is not used on the Mac or Lion.  What you *can* do is add the wireless printer to you network and print from the mac using that.

  • I tried to download Firefox 4.0 on my Mac Intel running OS 10.6.6. I get a message that it can not download because libsmime3.dylib is open. And now FirFox 3.6 has disappeared. What do i do?

    I tried to download Firefox 4.0 on my Mac Intel running OS 10.6.6. I get a message that it can not download because libsmime3.dylib is open. And now FirFox 3.6 has disappeared. What do i do?

    FireFox can't open lots of files it isn't suposed to. DMG is opened by the Mac osx as a virtual volume file you just drag the FireFox icon to where you want it installed. Check your desktop for a FireFox volume... like a drive. Double click the DMG file if it is not there. This is how Mac works it has nothing to do with FireFox, many apps install this way!

  • So Can My Mac Be Made To Work With iChatAV ? (Replacement)

    Original http://discussions.apple.com/thread.jspa?threadID=121851
    So Can My Mac Be Made To Work With iChatAV ?
    This question is asked by many who find their computer is below the G3/600Mghz Specs limit set for iChat
    See here in the box to the top right for current specs.
    Please note there are different Specs for Audio and Video chat.
    It should be noted that the specs also list OS 10.3.x (Panther)
    It is presumed that you are going to want to take as much advantage of iChat as you can. So I will talk about Video chatting.
    For Jaguar (10.2.5 - 10.2.8)
    Prior to the beginning of Oct 2004 there was a Jaguar version of iChat AV on sale at the Apple Store as a download. If you are at 10.2.5 - 10.2.8 and downloaded the $29.95 Version 2.0 of iChat for Jaguar, in preperation of using iChat, before this date, you may find some of this information useful.
    If you did not buy it, your only option is to upgrade to Panther.
    For Panther (10.3.x) and Jaguar (10.2.5 -10.2.8)
    IF you fall below the G3/600 mark then you will need this utility from Ecamm.com This will enable iSight to work at lower spec machines. The current reported lower limit is around the G3/350Mhz mark.
    It is also will enable USB cameras for use with iChatAV, but there is little in the way of substantive information about Sub G3/600 computers achieving this.
    There have been about a dozen posts to say that it will use a USB cam on a G3 as low as 400Mgz
    It should be noted that computers of this age tend to lack Multi-Tasking and will find that iChat will take up most of their processor time.
    iChat AV FAQ folder
    iSight FAQ Search
    This former List of Firewire cameras contains a plain text mention of http://www.ioxperts.com/devices/webcam.html that work with the drivers already in the Mac OS. The download is not required. *See note below
    This former List of DV camcorders that work with the drivers already in the Mac OS and now list just links to the manufactures.. *See note below. With the proviso of the note below this is a list to point out what cameras will work with iChat with the current OS (and some of the preceeding ones). The purpose of linking it here is for those comtemplating purchasing a camera.
    Essentially any Firewire camera will work with the OS. Some MiniDV formats can not be seen by iChat though
    *Note: Both these last two list were updated Jan 2004 or before. The purpose of pointing this out to highlight the fact that new cameras have come on the market since. They may work with these drivers or have their own Mac Firewire drivers on their accompanying install CDs.
    The Current list for Firewire Webcams is now here as linked above.
    10.4.9 now adds a driver for USB Video Class (UCV) web cams that will work with the OS and iChat. Not all USB video cams are of this type and iChatUSBCam is still needed.
    Mulit-Video Chatting
    As can be seen from the Specs linked earlier you need a Mac over a certain Spec (G4/1Ghz Dual) to be able to Host Video chats. (plus Internet Speed).
    Ecamm come to people rescue again with PowerBoost
    9:21 PM Friday; March 30, 2007
    G4/1GhzDual MDD MacBookPro 2gig NETGEAR DG834GUK Hollywood Dazzle DV Mac OS X (10.4.9) Have you read the iChat FAQs ?? ^See link at top of the Topic List ^

    Original http://discussions.apple.com/thread.jspa?threadID=121851
    So Can My Mac Be Made To Work With iChatAV ?
    This question is asked by many who find their computer is below the G3/600Mghz Specs limit set for iChat
    See here in the box to the top right for current specs.
    Please note there are different Specs for Audio and Video chat.
    It should be noted that the specs also list OS 10.3.x (Panther)
    It is presumed that you are going to want to take as much advantage of iChat as you can. So I will talk about Video chatting.
    For Jaguar (10.2.5 - 10.2.8)
    Prior to the beginning of Oct 2004 there was a Jaguar version of iChat AV on sale at the Apple Store as a download. If you are at 10.2.5 - 10.2.8 and downloaded the $29.95 Version 2.0 of iChat for Jaguar, in preperation of using iChat, before this date, you may find some of this information useful.
    If you did not buy it, your only option is to upgrade to Panther.
    For Panther (10.3.x) and Jaguar (10.2.5 -10.2.8)
    IF you fall below the G3/600 mark then you will need this utility from Ecamm.com This will enable iSight to work at lower spec machines. The current reported lower limit is around the G3/350Mhz mark.
    It is also will enable USB cameras for use with iChatAV, but there is little in the way of substantive information about Sub G3/600 computers achieving this.
    There have been about a dozen posts to say that it will use a USB cam on a G3 as low as 400Mgz
    It should be noted that computers of this age tend to lack Multi-Tasking and will find that iChat will take up most of their processor time.
    iChat AV FAQ folder
    iSight FAQ Search
    This former List of Firewire cameras contains a plain text mention of http://www.ioxperts.com/devices/webcam.htmlhttp://www.ioxperts.com/devices/webcam.html that work with the drivers already in the Mac OS. The download is not required. *See note below
    This former List of DV camcorders that work with the drivers already in the Mac OS and now list just links to the manufactures.. *See note below. With the proviso of the note below this is a list to point out what cameras will work with iChat with the current OS (and some of the preceeding ones). The purpose of linking it here is for those comtemplating purchasing a camera.
    Essentially any Firewire camera will work with the OS. Some MiniDV formats can not be seen by iChat though
    *Note: Both these last two list were updated Jan 2004 or before. The purpose of pointing this out to highlight the fact that new cameras have come on the market since. They may work with these drivers or have their own Mac Firewire drivers on their accompanying install CDs.
    The Current list for Firewire Webcams is now here as linked above.
    10.4.9 now adds a driver for USB Video Class (UCV) web cams that will work with the OS and iChat. Not all USB video cams are of this type and iChatUSBCam is still needed.
    Mulit-Video Chatting
    As can be seen from the Specs linked earlier you need a Mac over a certain Spec (G4/1Ghz Dual) to be able to Host Video chats. (plus Internet Speed).
    Ecamm come to people rescue again with PowerBoost
    3:09 PM Saturday; April 7, 2007

  • Can my mac support airplay mirroring?, can my mac support airplay mirroring?

    Can my mac (W8047LXVATM) support airplay mirroring in Mountain Lion? I hope!

    FranzFranz wrote:
    Apple Logo > about this mac > more info > ?
    What exactly am I looking for after I click on more info?
    Sorry if this is a basic question. I don't really know much about how the computer works
    didn't you want to know what kind of Macbook Air do you own?

  • Can my mac pro Bluetooth talk to my new ATV using Bluetooth to send slideshows

    Can my mac pro Bluetooth talk to my new ATV using Bluetooth to send slideshows, music and movies

    You know you don't have to buy a replacement dvd drive from apple.  For example, take a look at OWC's selection. 
    You don't say what year your mac pro is so I use a 2008 as an example.  On that page click the little picture that shows a 2008 mac pro.  That will take you to this page.  And there's an example of a Lite-On drive. 
    In addition, on the right side of that page are links to instructional videos on how to add the drive to your machine.  Click, for example, Optical, med (medium) and you will see how straight forward it is to change the optical drive.

  • Can the mac mini i7, 8gigs ram,  edit avchd 1920/1080p without having to convert it?

    Can the mac mini i7, 8gigs ram,  external FW800 drive, edit avchd 1920/1080p without having to convert it?
    Can you scrub the TL at 5x speed and not have it stutter?

    By default it converts it to ProRes 422, though you can specify other codecs.
    Why convert it?
    Although FCP X can handle AVCHD natively, AVCHD being a "delivery" codec is not really suitable for editing.
    ProRes is designed specifically for ease of editing especially with complex effects and colour correction.
    If your editing is going to be fairly basic you can get away with leaving your media as AVCHD.
    Note also that an hour of ProRes is around 50GB !

  • Can my mac book pro's battery be damaged by charging it to much to often?

    Can my mac book pro's battery be damaged by charging it to much to often?

    no, but it will lead to you needing a new battery sooner. http://www.apple.com/batteries/notebooks.html

  • I got a fake message from the FBI and now I supposedly have the Reveton virus and Citadel malware. Can a Mac even get these? If so, how do I get rid of them?

    Can a Mac get the Reveton virus and Citadel malware? If so, how do I get rid of them?

    See:
    FBI ransomware “virus” rampant

Maybe you are looking for