Can Premiere Pro resume when computer sleeps in middle of rendering?

My computer
core i7
64 bit
1.6 CPU (boosts up to 2.5)
6 gigs ram
My footage
source: 1920x1080
Output: 720x480
Time of footage 54 min
File Size 2.5 gigs
Render time
When I had it set to Qualtiy 5.0, Bitrate 5 -7, VBR 2 pass, and checked Max. Render quality, Use Previews(which doesn't matter cause I have no previews associated),  My render time was seriously 36 hours!  I know scaling down adds to the time, but wow it is long. And no I have no special effects on the footage, just some zooming in and out and audio fades. Well I tried to do render it, but it is a laptop and I have to take it home to do work and traveling. Well, eventually I messed up and the laptop went to sleep.
Can Premiere pro continue to render after it has gone to sleep?
It did not seem to. The timer just sat there going up every second. So I stopped it and tried again. I lowered the settings to get only a 24 hours render time, but this morning I messed up and my laptop was running on battery power and it went to sleep. On resume, it had the same result, it seemed to stop progressing and just had the timer continue to tick up. Should I have been patient and waited another 4 hours to see if it actually resumed?
Since I use a laptop and such large render times. I want Premiere Pro to have a PAUSE ability  on rendering! Even if I need  to do a full shutdown. Is that even possible?

I just remembered something. The reason why it was 36 hours is my raw footage was on an external 3.0 USB drive rendering the footage to my internal harddrive. So.. I moved my raw footage over to my internal harddrive and that reduced render time drastically. I have already read up on some articles how people have their cache on one drive, footage on another, and render to another or something like that so that harddrives are not have to read and write to the same drive to slow things. But... If my external drives get unplugged from my laptop during transit rendering obviously stops. But regardless, it doesn't matter I noticed a dramatic decrease in render time when moving everything to just one drive.

Similar Messages

  • Can Premiere Pro CS6 be shut down when Encore CS6 has the project to save memory?

    Pretty much the title says it all.  I am curious if it helps the computer to shut down, close, exit Premiere Pro CS6 when you have dynamically linked Encore CS6 with it?  I am trying to give as much RAM as possible to Encore during my heavy renderings and if PP did not need to be on then there is a better chance the computer will not crash (or so I believe).
    I have 16gb RAM and my projects are about 80gb in HD being transcoded to 8.4gb SD for DL DVD burns.
    Thanks!

    Maybe, yes, and no.
    Maybe it will help, but probably not.
    Yes, you can close Premiere.
    But, dynamic link keeps an instance of pproheadless (whatever it's called) running; perhaps one for each sequence. So no, you don't save what you might think.
    Take a look at Encore Edit -> Preferences -> Memory to see how much you reserved for other processes, and therefore how much Adobe has for EN and PR (assuming other adobe apps are closed).

  • Hi. I wanna know the reason whyI can't sync my ipad to my computer. It says that sync will resume when (computer's name) is available? My device runs with ios6.1.3 and itunes 11. Please answer. Thanks.

    Hi. I wanna know the reason whyI can't sync my ipad to my computer. It says that sync will resume when (computer's name) is available? My device runs with ios6.1.3 and itunes 11. Even I would like to transfer and view photos using the USB cable, it doesn't appear in the computer. Please answer. Thanks.

    Hi Lauren ...
    Try the troubleshooting steps here > iOS: Device not recognized in iTunes for Windows

  • Premiere Pro CS6crashes when opening project files ...

    01
    02
    After I work on my videos for long time, now Premiere Pro crashing when i open my projects.
    It's hepen after I updated adobe softweres.
    Can some one help me?

    OS: Windows 8
    Operating System:        Windows 8 Pro 64-bit (6.2, Build 9200) (9200.win8_gdr.121023-1503)
    Language:                       English (Regional Setting: English)
    System Manufacturer:  ASUSTeK COMPUTER INC.
    System Model:                Z9PE-D8 WS
    Processor:                       Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (12 CPUs), ~2.0GHz
    Memory:                         32768MB RAM
    Available OS Memory:  32718MB RAM
    DirectX Version:             DirectX 11
    Adobe Premiere pro CS6
    I have Neat Video plug-in and I have used this plug in my videos projects.  I uninstalled this plug after I updated adobe software and I installed again. But still I can't open my project files.

  • Since I upgraded to Maverick when computer sleeps it will not wake up but must be restarted?  Also password to icloud is never saved?

    Since I upgraded to Maverick when computer sleeps it will not wake up but must be restarted?  Also password to icloud is never saved?

    I read someone said you can tap on "other" when selecting which wifi you connect to and then entering the exact wifi name of the network you wish to join and the password and then joining that network allowed the password to be saved.  Also with iOS 6 the minimum length of the password needs to be 8 characters.  Maybe you password on your router is less than 8 characters long

  • TS2972 Apple tv sleeps when computer sleeps. What to do

    The TV disconnects from Apple TV sharing when computer sleeps. What to do?

    George, Your trouble sounds just like mine. You can read my thread here: https://discussions.apple.com/thread/4204561?start=0&tstart=0, but in summary:
    Itunes and the Apple TV exchange messages about once per minute. If any wifi interference stops the message-and-reply, iTunes closes the home sharing connection.  Other services are usually fine.
    I solved my problems by wiring the ATV and computer. (Wiring either alone didn't work.)  Home Sharing is now rock solid and works exactly as advertised. No drop-outs during play. The iTunes library is always available on ATV - I never have to restart home sharing or iTunes or the ATV. If a computer or ATV restarts, they pair up automatically.
    Not everyone can wire, I know. But it worked for me. Test it if you can.
    John

  • Somebody know how to fix that?  Premiere Pro crash when i try to load some project

    Hi!
    I work with Premiere Pro CC
    When i try to open a project ( only that project) i have this error message:
    [/sirreact64/releases/2013.03/shared/adobe/MediaCore/Backend/Make/Mac/../../Src/Content/Vi deoMediaContent.cpp-175]
    How can i fix that?
    thanks!

    Hi 0dbVideo,
    Thanks for choosing adobe forums,
    please provide following information :
    What is the OS and version ?
    What is the Graphics Card installed on the system ?
    How much Ram do you have ?
    Do you use any external Hard Drive ?
    Are you using security software e.g. Norton, etc
    and
    if windows, Please check if you have windows defender turned on ?
    Regards,
    Sandeep

  • Can Premiere Pro CC work with mpeg files?

    I tried to work with *.mpeg files, but can import them into a project.
    Can Premiere Pro CC impoert and export mpeg (1, 2)  files?

    Lucky ...
    As shooternz says, yes ... although if you are new, you may not realize that when you start a project, you have to manually "create a sequence" first, THEN you can add clips to the sequence. Until you have a sequence on the timeline, simply dragging & dropping from either the source monitor or project/browser panel to the timeline area will not work. Nor trying add a clip to the timeline either by the properties panel (after right-clicking on a clip) or the top menus.
    Create a new sequence on the timeline, then ... you can drag & drop from either the source or project/browser panels, right-clicking on footage and using the property menus, all now works.
    Steps to create a new sequence ... "ctrl(cmd) - N" with keyboard to create a new sequence, or in project/media browser panel ... right-click and choose "new -> sequence", or in that panel click on the piece of paper with a folded-corner icon (lower right corner) then choose "new->sequence" or of course, "File->new->sequence" from the main menu bar.
    Neil

  • Using Premiere Pro CS3 When exporting as flash file poor picture quality

    I'm using Premiere Pro CS3. I shoot green screen in HDV and work in 1440 x 1080. I have been capturing files in Premiere and sending them to Serious Magic Ulta 2. I use this program for keying and adding virtual backgrounds. I save these files as avi. with a resolution of 1440 X 1080. I then bring them back into Premiere Pro for final edit. When I export these video's encoded as mpeg2 theyplay very clear. I am now trying to export as flv. with alpha channel background and the resolution is poor. I working on the transparent background with walk on spokespersons that overlay the HTML page. When In try to play them on my computer the adobe media player is what comes up. I have downloaded flash player but it doesn't select it to play the video. I'm running windows Vista Business platform. What am I doing wrong.

    Thanks for the reply.
    The capture and editing have already been done in 1440 X 1080. Should I use this resolution rather than trying to bump it up to 1920 X 1080.
    Thanks
    Bill Bennett
    Date: Fri, 2 Sep 2011 07:33:04 -0600
    From: [email protected]
    To: [email protected]
    Subject: Using Premiere Pro CS3 When exporting as flash file poor picture quality
    Computer playback generally prefers square pixels.  Make sure to set your output resolution to 1920 x 1080 using a Pixel Aspect Ratio (PAR) of 1.0 or Square.
    See if that helps.
    >

  • Premiere Pro crashes when i start it up. Help please :-)

    Premiere Pro crashes when i start it up. Help please :-)

    Go to Adobe Premiere Pro CC error on start and answer all the questions I posted in reply #1

  • PPPoE Still Disconnects When Computer Sleeps

    With 10.9.2 and again with 10.9.3, PPPoE disconnects when computer sleeps.  This didn't happen with OS 8.x, OS 9.x, OS X 10.2, 10.8.x, 10.9.0, or 10.9.1.  System Preferences>Energy Saver is set for display and computer to sleep after about 12 minutes.  I'd rather not set computer to never sleep.  Please advise and correct for 10.9.4.  Thank you.

    I have the same issue. Also after wake-up connecting to PPPoE is a challenge, because it establishes only after 5-7 attemps (Authentication failed). I guess 10.9.3 update causes this.

  • Can premiere pro cs4 run on win 8.1

    can premiere pro cs4 run on win 8.1

    If anyone is still using CS4 and has Win8.1 you will find them in Premiere Pro CS4 & Earlier

  • Can Premiere Pro CS4 import H.264 quicktimes?

    Can Premiere Pro CS4 import H.264 quicktimes?

    If the QT's are pure H.264, and you have that installed, then there should not be an issue.
    Some camera mfgrs., and others, like to tweak H.264, so there is no all encompassing answer.
    If you are having issues with a QT file, that seems to be H.264, you might want to look closely at the full specs. in MediaInfo, just to be sure that all settings match what they should.
    Where did these files come from? That might tell the tale.
    Good luck,
    Hunt

  • TS4062 How do I get music on iPhone w/out downloading from Cloud? Error "sync will resume when "computer" is available." Tried syncing music w/ cord, w/out cord; only purchased music, only a few songs. Restarted devices & both are updated w/ latest softwa

    How do I get music onto my iPhone without having to download it from the Cloud? My iPhone gives the error "sync will resume when "computer" is available" on the final step of synching. The computer says "waiting for changes to be applied" but the phone doesn't have the two little sync arrows anymore. Seems it will stay like that for hours if I don't cancel it. I've tried syncing the songs with the cord & without the cord; using only purchased music or only a few songs. I've restarted both devices & both are updated with the latest software. My phone says it hasn't synced in 5 months, even though I've tried. WiFi is working. I've tried checking and unchecking the box in iTunes. I've turned Windows Firewall on/off. Ran the diagnostics in iTunes. Nothing seems to work. Help!

    Hello Megurine Lockhart,
    I would recommend re syncing the music to the phone from iTunes by unchecking the sync music checkbox in iTunes, sync, then re check it and sync again.
    For reference this is what I mean:
    Syncing music
    Connect your iPod to your computer and open iTunes.
    Select your your iPod in the Devices section on the left side of the iTunes window.
    In the main iTunes browser window, select Music.
    Select the option to Sync Music. You may also select "Include Music videos" if you would like to sync Music videos to a device.
    From: iTunes: Syncing media content to iPod
              http://support.apple.com/kb/ht1351
    The article references an iPod but its the same for an iPhone.
    All the best,
    Sterling

  • Can Premiere Pro CS 5.5 Export An XML To The New Final Cut Pro X?

    Can Premiere Pro CS 5.5 Export an XML to the new final Cut Pro X?

    No, it won't. Premiere Pro can only export an XML for FCP7 or earlier. Make a feature request if you like: http://www.adobe.com/go/wish

Maybe you are looking for

  • Incoming Payment Posting

    Hi, We have a seperate accounting system that handles customer payments.  The customer pays us and this payment is recorded in the external system.  The G/L Accounts in the external system are in line with the chart of accounts in SAP R/3.  Now we wo

  • All my web browsers cannot load this page.

    After upgraded my Windows 8 x64 to Windows 8.1 x64 and flash player/flash plugin to latest version.  All my web browsers cannot load this page "http://www.etoro.com/webtrader/".  I've tried to load this webpage on IE11, Firefox 25 and the latest Chro

  • No sound in Browsers and low memory errors for Snood and Ultimate Solitaire

    No sound in Browsers and low memory errors for Snood and Ultimate Solitaire. Those are what I'm experiancing. The no sound happens in Safari, Firefox and Opera. Both Snood and Ultimate Solitaire won't load because of 'Not Enough Memory' yet I have 2g

  • I can't open PRE 9! HELP PLEASE!!!!

    Hello there, I don't know what to do anymore, my PRE 9 won't open any project files, any new files. And now and then it pops up a message saying it can¨t open the file so now it has to force close. I've tried to system restore to a day where it worke

  • Why the database, listener and asm are offline automatically

    I just install two nodes RAC on vmware, everything is OK. After I install database, I find, the system is not stable. I use the command "crs_stat -t" , everything is online, however, after a while, database instances, asms or listeners go often offli