Can Premiere Pro smart render footage from a Canon 5D mark III ?

I already read that Premiere Pro can smart render certain codecs. But I want to know exactly: Can it smart render the video from a Canon 5D mark III?
In case smart render is not very specific: I'm asking if it can export the footage after cutting without rencoding it by just saving the individual frames into a new video container with the same codec. This should increase export time alot.
I'm asking because I have Premiere Elements and this feature would be the only reason for me to switch to Pro. I currently need 40 Minutes to render 10 Minutes. As a journalist I need to be faster.

Do you have any other tips how to boost export speed? I don't need the video to be small. I only do a raw edit where I cut out the junk. Quality loss should be minimal and speed ist most important.
Its hard to know if your export speed is normal or otherwise without some detail from you for comparison.
Hardware, system, OS and current export settings and times etc..
Generally the system and set up will determine the speed and editing experience.
5D footage should be no problem at all to a decent system ( and setup)
If you do a test export for us...tell us how long the export takes for how much footage .  eg 1 minute footage = X export time.
No Effects.

Similar Messages

  • I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac

    I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac

    The Mk III requires an updated version of Camera RAw, so run Help --> Updates and install it.
    Mylenium

  • Hi. I have Lightroom 4 installed. I cannot download my CR2 files from the Canon 5D Mark III camera. I have downloaded Lightroom 5 thinking it was an update but it appears I have to pay for the program. Any ideas how I can get lightroom 4 to accept my CR2

    I have Lightroom 4 installed. I cannot download my CR2 files from the Canon 5D Mark III camera. I have downloaded Lightroom 5 thinking it was an update but it appears I have to pay for the program. Any ideas how I can get lightroom 4 to accept my CR2 files ?

    The Canon 5D Mk 111 was supported from LR 4.1, see the link below. Just update LR to the latest version. See link below
    Camera Raw plug-in | Supported cameras
    Adobe - Lightroom : For Windows
    Adobe - Lightroom : For Macintosh

  • Need camera raw 6.7 so I can open CR2 files from my Canon 5d mark iii

    I purchase PS CS5 and says my camera is compatible and it will not open up the CR2 camera raw files from my canon 5D Mark iii camera. I used it in the past, and up graded my hard drive to MAC OSX 10.9, purchased new PS CS5 and Adobe will not update the Camera Raw 6 to 6.7 which using my files...

    Hi redtulips54,
    There you go. Download the one you need, depending on your operating system.
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
    Hope that Helps.
    Cheers!
    ~ Arpit

  • When will finder show a thumbnail or preview of the raw file images from the Canon 5d mark iii?

    I am wondering if anyone has an update on when finder will show a thumbnail for the raw files from the Canon 5d mark III? I've done all the updates possible and nothing has changed, I can't do a quick preview either, it just shows the extension image, not the actual image taken. (The symbol for crw).

    I had the same problem for a Canon EOS-1D X and finally got around it by viewing the images in Adobe Bridge. Worked beautifully!

  • Why does not Lightroom allow me to import RAW files from my Canon 5D Mark III?

    Why does not Lightroom allow me to import RAW files from my Canon 5D Mark III?
    Error message that it does not support cr. file

    Which version of Lightroom?
    As Hal points out, if it's pre v 4.1, you can't expect an old version of the software to know what to do with a camera that didn't even exist when the software was released.
    Given how many times a day this same issue comes up, maybe it's time Adobe changed the error message to something like "your camera is too old to be supported by this version of Lightroom. Please upgrade" or similar... 

  • Why is it suddenly impossible to import raw files from my canon 1ds mark III? I work with a mac 5. Nothing has been changed in the settings...

    I've been working for 2 years with Lightroom and importing pictures from my canon 1ds mark III
    Suddenly it doesn't work. Can somebody explain this or help me to change something
    so I can import my photos???

    import raw file default wrote:
    When Im trying to import photos Lightroom says it not all import results are possible.
    As DJ suggests, that's probably not the exact wording. Can we have that, please?
    Still need your OS and Lightroom version too.

  • Preview/import images from my canon 5d mark III in lightroom 3?

    Why can't I preview or import images from my canon 5d mark III in lightroom 3?

    blogs.adobe.com/crawlspace/2011/03/why-doesnt-my-version-of-photoshop-or-lightroom-support -my-camera.html

  • Is anyone using iMovie 08 for editing footage from a Canon 5D Mark 11?

    I'm interested to converse with anyone that is using iMovie 08 to edit Movie files from the Canon 5D Mark 11.

    HI Stephen,
    I have iMovie 09 on order hoping that it would alleviate this issue - sounds like it does not. Similarly to you, my footage imports fine, but the application crashes when the curser is moving over the video. I am lead to believe that iMovie just cannot cope with the high resolution of the 5D Mark 11.
    I have tried the same files on other Macs and the same issue occurs, so it is not my machine or software issues on my machine. All of my software is up to date - except for Quicktime. I am running 7.5.5, so don't bother trying to roll back from 7.6 because it will not help.
    I have also tried the footage on Final Cut Express and it crashes that application as well. I understand the Final Cut Pro can work with the files. At this stage I presume that Canon 5D mark11 users cannot edit footage on iMovie or FCE and possibly some other applications.
    Let us hope and pray that Apple and Canon can sort this out!
    Scott

  • How to import Raw files from the Canon 5D Mark III into PSE12? [was: cr2]

    I have Photoshop Elements 12 and I can't import Canon 5D Mark III CR2 files.

    Not sure what you mean by view the photos?  Are they showing in the camera raw dialog when you choose a CR2 file from the menu in expert mode:
    File >> Open
    What computer and operating system are you using?
    Can you try shooting a couple of new CR2 files and then put them into a folder on your hard drive rather than the external drive. Can you import from that location using the Organizer menu:
    File >> Get photos & Videos >> From Files & Folders

  • Not able to open raw files from my CAnon 5D mark III in PS CS6!

    I have camera raw 8.6 installed and am running photoshop cs 6.0.  All of a suddened photoshop will not open raw pictures that were shot on a CAnon 5D mark III.  Any ideas on what could be the problem.  The pictures do open in light room.
    Thanks
    Bruce

    What exactly happens when you try to open raw files from Canon 5D Mark III in PS CS6. Do you get any error message? An error screenshot would help.
    Make sure your PS CS6 is up-to-date from Help > Updates.
    Restart the machine and retry.
    ~ Arpit

  • I cannot open .CR2 files - am using OS X Mavericks?  The images were downloaded from a Canon 7D Mark III.

    Hello,
    My mother-in-law saved some pictures to my computer but I cannot open them in Lightroom or any other program that lets me edit them.  They have a .CR2 extension and she uses a Canon 7D Mark III.  Any tips?  Thanks!

    it's a special cannon file format
    http://filext.com/file-extension/CR2
    you will maybe require special canon software to open them
    or you can try google
    http://www.fileinfo.com/extension/cr2
    more hits
    open cr2 on mac

  • My lightroom wont upload my images from my canon 5D Mark III

    Im not sure which firmware update to use to fix this. Any help please. Thanks.

    That message is correct. Version 3.6 is the latest version of Lightroom 3 so there are no updates to that version.
    However that's not the whole story. You need to pay to upgrade (not update) Lightroom to version 4 or 5.
    The Canon 5D Mark III was first supported in Lightroom 4.1. That camera will never be supported in Lightroom 3.
    Camera Raw plug-in | Supported cameras
    So you need at least version 4.1 but Adobe only sells version 5.
    So your best bet is to pay to upgrade to Lightroom 5.7 so you can open 5D Mark III Raw files directly into Lightroom.
    FREE ALTERNATIVE
    Or, you can download the free Adobe DNG converter, convert all 5D Mark III Raw files to DNG format then edit the DNGs in Lightroom 3.6.
    Photoshop Help | Digital Negative (DNG)

  • Will this download open CR2 files on a CS4 program from a Canon 5D Mark III?

    I know that Cs4 will not support CR2 files from a New Mark III.  I need to fix this.  With the CC, will it allow me to open the CR2 files in PS CS4?

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    The 5D Mark III was first supported in Camera Raw 7.1 which is compatible with CS6 and later.
    So, to answer your question, yes CS6, CC and CC 2014 can open and edit Raw files from the 5D Mark III.

  • Why are my raw files from my Canon 5D Mark III dim in Lightroom 4.3?

    I am brand new to Lightroom, still reviewing various basic instruction videos, however I am adept in Photoshop CS5 and CS6. I have been able to import and move a file of jpegs but as I shoot jpeg/raw combo, the raw files were left behind in the original file. I can now bring them up, but they are dim and cannot appear to do anything w/them. I would like to move them to the file where I put the accompanying jpegs, but am having no success in finding an answer on how to do this. Nothing seems to activite to let me do this.  Along w/this, I generally tend to work straight from camera raw files, the jpegs are generally not used, thus when LR encourages me to work on the jpegs, I'm not interested. I wish to process my raw files and only move to PS6 if I need to do some more intensive work. Can anyone offer a suggestion?

    Here's my guess, based upon your description.
    When the RAW photos are "dim", you are in the Import Dialog box, and the default operation of the Import is to not let you import a photo if it has been previously imported.
    If that's the case, then you have misunderstood a basic operation of Lightroom. You import your photos once, and from then on, you access them via the Library Module, not the Import dialog. So, go to the Library Module and see if your RAWs are present or not.
    Side comment: your workflow seems to be import then move. This is unneccessary, creating two steps for you when one will suffice. When you do the import, you also tell LR the destination where the photos should wind up (it's on the right hand side of the Import dialog box), and LR will do the import and the move in one step.

Maybe you are looking for

  • ~Can't open "noname" MIME files in Gmail~

    I've searched for this topic, but can't understand all the tech-speak! I'm in my 20s, so I'm not dumb, just not in the loop. Someone break this down for me in layman's terms. I use Gmail for my primary email. Lately, I've been getting attachments fro

  • Compatibility w/ Older Universal Dock?

    I've got the original universal dock. (The one w/ S-Video and the big round IR sensor.) It's not sold anymore (for about 9-10 months maybe) and was made prior to the 3GS. Sometimes when I connect my phone I get a message that says the accessory is in

  • Web Service error in NWDS.

    While creating a web service in NWDS, when I select the method to be contained in the virtual interface (web service) , I get an error in the next step Extending Type Specification of an extending type for abstract type com.sap.security.api.IPrincipa

  • Max number of emails to download

    Hi guys, Since I upgraded my iphone 4 to iOS 7.0.4 there is no way to set the maximun number of emails to download as in iOS 6..... is there a solution to fix it? I have an email account where I receive messages from a remote surveillance camera and

  • How to transfer the episore in tv menu

    Hi i am using ipod 30 Gb ipod. i want to know how to trnsfer all the episodees in the .mp4 format to Tv menu in itunes. i have heard about taggerjava 6. but where can i find it also which are other softwares..