Can Prime Infastructure 2.1 support Non-Cisco Products? Import a MIB from a Non-Cisco Product?

I have an Non-cisco product that I which to manage by way of SNMP.
The product has MIB's so can PI support it, and can I import the MIB?
Thanks

You can design custom SNMP polling templates to monitor third-party or Cisco devices and device groups. Using this feature, you can:
Upload the SNMP MIB for the device type, then choose devices and attributes to poll and the polling frequency.
Upload a single MIB definition file, or a group of MIBs with their dependencies as a ZIP file.
Deploy the custom SNMP polling template the same way as other monitoring templates.
Display the results as a line chart or a table.
This feature enables you to easily repeat polling for the same devices and attributes, and can be used to customize the way Cisco devices are polled using SNMP.
You can create a maximum of 25 custom SNMP polling templates.
For more details on how to create custom SNMP Template, please the user guide.
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

Similar Messages

  • HT5691 Why can't I purchase applecare support for my iphone5 that was bought from ATT?

    Why can't I purchase applecare support for my iphone5 that was bought from ATT?

    not online like I usually do.
    when I enter the serial number, it shows standard warranty with no option to purchase exended applecare+

  • Non static method cannot be referenced from a non static context

    Dear all
    I am getting the above error message in my program.
    public void testing(Vector XY){
    RecStore.checkUnits(XY);
    }method checkUnits is non static and cannont be called from a non static context. I don't see the word static anywhere...
    I have done a wider search throughout the main class and I'm haven't got any static their either.
    Any ideas?
    Thanks
    Dan

    Yup
    I had pared down my code, infact it is being called from within a large if statement.Irrelevant.
    But the same thing still holds that there is no static keyword used.Read my previous post. Calling checkUnits using the class name:
    RecStore.checkUnits(XY);implies a static context--in order for that call to work, checkUnits must be static. That's what your error message is saying--you are trying to call the non-static method "checkUnits" from the static context of using the class name "RecStore."

  • How can I set up a time capsule to extend my wifi network from a non-apple Medialink MWN-WAPR300N?

    I just purchased a new Medialink MWN-WAPR300N from Amazon to replace my old 2008 500 GB Time Capsule.
    I was wondering if it would be possible to use my old Time Capsule to extend the network from the Medialink router to the rooms in the back of my house. Would this be possible? How about if I use the Time Capsule as the primary point, and use the Medialink router to extend the network?
    Thanks!

    The Time Capsule would not be compatible with a Medialink product if you are thinking of trying to use the Time Capsule to extend the Medialink network using wireless only.
    The same would be true if the Time Capsule were the primary router, and you tried to use the Medialink product to extend the Time Capsule network wirelessly.
    If you can connect the two devices together using a permanent wired Ethernet connection, then you should be able to accomplish your goal.

  • Can you fix your help project (via coding) after importing a topic from an output file by mistake?

    Yes - I admit it - I imported html topic files from an output folder of another RH project into the help project I am currently working on (the source files were lost and I needed to bring over a lot of legacy content in a hurry). However, I completely forget that the RH output html file contains unique Java scripting that is used to render the topic properly in a browser, but that same Java Script causes havoc when you open it up in as a source file in another RH Project. Needless to say, it has caused numerous weird things when I went to publish and view my files (but, surprisingly, you don’t really see or notice them in the RH Design WYSIWYG view or preview mode).
    The bad news is that it took about 2 weeks for me to notice the issue (the help output is viewed on a special console running Linux with a QT browser that I only view occasionally). The good news is that is that I figured out what the problem was (that took some hours) and I can restore my help project back to a time before I did the "naughty deed".
    I am now at a crossroads - do I:
    Try to re-enter all of my content from the last two weeks? (Actually, to avoid repeating the same mistake twice, I will need to re-enter the text manually and NOT cut and paste from the RH output files!)
    Or locate and find the offending HTML coding in my topic files (if that is even possible)? Has anybody documented what the RH output file JavaScript code injects into your files, and what files they affect?

    OK - here is the documentation of this weird issue (hopefully, you can read the htlm code in the screen images):
    1. In this topic, I cut and pasted some text into the table you see at the bottom of the screen. I had to reapply the “TableBody” style to this text. After doing this, I moved my cursor to the “Keyboard" text on top. Notice that it is displaying the "TABLEBODY" style, although visually, it is displaying the correct style on screen (“Heading 1”).  
    2.     In HTML view, notice the addition of the class= “TableBody”> code for this “Keyboard” text.
    3.   I then reselected Heading 1 for this “Keyboard” text.
    4.   Notice that the class= “TableBody”> code is now removed for this “Keyboard” text and has just the proper <h1> tagged assigned.

  • 2 Qs: a: Can't see library in Pictures; b:How to import an old library

    I have a couple of problems with iPhoto.
    *1. Invisible Library*
    For some reason my library doesn't appear in the Finder when I go to the Pictures folder, however, I can see photos in my library when I open iPhoto.
    I've tried a spotlight search for iPhoto library but nothing appears.
    I have also tried quitting iPhoto and restarting holding the option key down. At the choice menu I cannot see any iPhoto library in the Pictures folder (or elsewhere).
    Is there some way I can make this invisible folder visible?
    *2. Import old library from external hard drive*
    I have a library stored on an external hard drive with several years worth of photos on it. I would like to import the photos but when I try, iPhoto imports everything including thumbnails, modified photos, originals etc. I end up with thousands of duplicate photos. How can I import only the original photos and/or photos that have been modified from this library?
    Thanks for your help
    Peter

    Peter:
    1 - in the library Control click on a thumbnail and select "Show File" in the contextual menu. When you get to the file in the Finder window you can use the Path button at the top of the Finder window to see where the library is located.
    It might be in a hidden folder for some reason. Go to the Finder->Go->Go to folder... menu and enter "/volumes" and hit return. If the library is there move it to the desktop and then into the Pictures folder. That will keep the events, albums, keywords, etc. intact for both libraries.
    2 - your best bet is to use the paid version of iPhoto Library Manager to merge the external library into the one on your boot drive.
    Are you running iPhoto 7 (08)? In iPhoto 7 when you import another library it ignores any file in thj folder Data folder, i.e. the thumbnails. So all you get are the originals and the modified files.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Cisco Prime LMS 4.1 - Support for Cisco Catalyst 3560-C Series Switches

    Hello together
    I have a customer which uses the following switch. Last year I have installed LMS 4.1 for him to manage the switches. Unfortunatly the switch model is not supported. According to the information found on the following site the switch is supported for most of the modules in LMS:
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/device_support/table/lms41sdt.html
    The oid object of the device is the following: 1.3.6.1.4.1.9.1.1465
    Supported Software: 12.2(55)EX (Customer has 12.2(55)EX3
    Version Support Type: Device Update
    So I updated all device updates I was able to find.
    Step 1: For that I went to Admin > System > Software Center > Schedule Device Downloads and created a job where I have downloaded the latest versions of all packages.
    Step 2: Installed the downloaded packages Admin > System > Software Center > Device Update and installed all the packages.
    Unfortunatly I don't see the same result like described in the Supported Device Table for LMS 4.1.
    - Cisco View -> works
    - Inventory and Config Collection -> works
    - Fault Monitor not working -> Error Code Unsupported
    - Network Topology Layer 2 Services -> Device Type ciscoProducts.1465, Symbol Question Mark
    - VLAN Management -> Doesn't work
    - User Tracking > seems also not to work
    When I open the report for supported devcies (Reports > System > Device Support) and search for C3560C... I find the following devices, but not mine which i need:
    C3560C-8PC-S     .1.3.6.1.4.1.9.1.1466
    C3560CG8PC         .1.3.6.1.4.1.9.1.1317
    C3560CCG8TC     .1.3.6.1.4.1.9.1.1318
    wsC3560CPD8ptS     .1.3.6.1.4.1.9.1.1368
    Does anybody have experience with the same switch type / model? Am I doing something wrong or is this type of switch not implemented correctly till now? Further the docuemntation supported devices would be wrong.
    Thanks for any feedback Erich

    Thanks but I just heard back from my Cisco SE and he assures me that an AP will NOT use up a license.
    I've asked him to verify his answer for me.
    Is your answer based on real world expereince (the best there is)?  That is, are you running Prime LMS 4.1 and does it indeed use up a license for each light-weight AP it discovers & manages?
    Thanks for mentioning options 1-3 but I do not wish to employ any of them.  I don't mind buying the additional licenses for APs ... I just need to know if I have to or not.
    Ian.

  • I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

    I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

    Apple only supports Windows on certain hardware.
    http://www.apple.com/support/bootcamp/
    Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
    It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
    Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
    http://refit.sourceforge.net/
    This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
    I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
    There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

  • How many domains can Prime Collaboration Advanced manage with the BE6000?

    The BE6000 Administration guide states that "Most BE6K deployments have a single domain as part of a Standard Prime installation. Multiple domains are available with Prime Collaboration Advanced (available for purchase) that can be used for complex Business Edition 6000 deployments."
    How many domains can Prime Collaboration Advanced manage with the BE6000 solution? How do we order and deploy Prime Collaboration Advanced with the BE6000 solution?

    http://docwiki.cisco.com/wiki/System_Capacity_for_Cisco_Prime_Collaboration_10.0

  • I can't find my previous ??? concerning if it is possible to load songs from a "non-apple" device into iTunes

    I can't fnd the question I asked in here roughly an hour ago - concerning if I can load songs from a "non-apple" device. I have a SanDisk that I'd like to load my songs into iTunes - is this possible?

    A.C.,
    These links will give you several methods of recovering whatever songs remain on your iPod; some free, some third-party software, some more comprehensive for restoring Playlists, Ratings, Play Counts, etc. Read them and their associated links before deciding on a strategy that works for you. There are many various third-party software programs that will offer a more robust process, or an easier GUI. Do a Google search for them if the links below leave you wanting…
    Don King Resurrected: Deleted files from hard drive (free user steps – music recovery only)
    MacMuse: Computer Crashed (free user steps – music recovery only)
    Copying music from iPod to computer (a primer on various methods and software)
    Copying Songs from Your iPod to a Mac or PC (resource for 3rd party software)
    iPodRip Software
    PodUtil Software
    Senuti (Mac OS X v10.3 or higher Recovery Utility)
    XPlay (Software For Music Recovery &/or Cross-Platform Functionality)
    XPlay Photo Browser (For recovering Photos)
    After recovering your song files, strongly consider developing a thorough backup strategy for just this type of situation (and many other potential disasters).
    You need at least two full sets of your music, not including what is on the iPod:
    -- One full set on the PC within iTunes (on internal HD or ExHD)
    -- One full set on an separate external backup medium (CD/DVD/ExHD/other)
    -- One (full or partial) set on the iPod
    Music files on just the iPod and only one other medium is not considered having any backup.
    If you cannot store your complete music files on the computer’s internal HD, then create and maintain at least two external sets (any multiple combinations of ExHDs, DVDs, CDs).
    Backup both the music files and the Library database file (iTunes Library.itl). What are the iTunes Library files?
    Here is a post on developing a thorough backup strategy: http://discussions.apple.com/click.jspa?searchID=394618&messageID=1263275

  • Does the Catalyst 2960x-48TD support Cisco's IGMP Snooping MIB?

    Does the Catalyst 2960x-48TD support Cisco's IGMP Snooping MIB?  We have a number of switches from different vendors and have recently begun switching to Cisco's, however unlike the other brands I am unable to audit the IGMP Snooping settings via SNMP.  It appears that while the switch supports IGMP Snooping it does not support the CISCO MIB for IGMP Snooping.  Is this a known bug and is it fixed in any of the later releases?
    Our company is purchasing and deploying C2960X-48TD's and I am tasked with updating our system audit software 

    Hi Sean,
    Nov 21 15:40:42.390: %MCAST-SPSTBY-6-ETRACK_STATS_LIMIT_EXCEEDED: Number of entries in IGMP snooping explicit-tracking statistics has exceeded the maximum limit (32000)
    The above log message is written because the number of explicit-tracking statistics entries is bounded to avoid monopolizing of system resources by IGMP/MLD snooping. The explicit-tracking statistics database maximum size is set to the same as that of explicit-tracking limit.
    The statistics are split into two banks: permanent and volatile. The statistics entries will be stored permanently (volatile) until the permanent entries threshold is reached, after which the statistics will be stored temporarily up to the database maximum size. When the size of the database exceeds the permanent threshold, a group will be removed on receiving an IGMP/MLD leave. Groups can be removed whether they were installed above or below the permanent threshold. If the number of statistics entries grows beyond the maximum size of the database, then no statistics will be stored for any newly formed groups.
    You can disable ip igmp snooping explicit-tracking by the following
    1) Configure "no ip igmp snooping explicit-tracking"
    2) Configure "ip igmp snooping limit track 0" on global.
    3) After ET is disabled, please do a "clear ip igmp snooping statistics".
    Here is a reference URL (please make sure you copy and paste the entire link to the browser):
    http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/snooigmp.html#wp1062242
    HTH
    Luke

  • Is there any app that support to send or recieve files from another non-iphone?

    is there any app that support to send or recieve files from another non-iphone?

    if an app was made for both the iphone and the other phone then yes
    one can always use dropbox and google drive and the likes

  • Can't send- doesn't support authentication: Road Runner

    Hello all,
    I have a new Mac Book Pro and it won't accept the settings I am entering in Mail.
    Mail automatically set up the first Road Runner (RR) account no problem and retrieved old mail from server but it wouldn't let me send mail or get mail soon after that.
    I am getting "doesn't support authentication" message and have changed that setting with no luck. Also message of can't connect to SMTP server.
    Anyone know if I should check SSL, which authentication I should check,
    in prefs> acct> the 2nd line of info RR Pop is greyed out.
    I know my passwords are right I copied them over from other 2 computers on my network that are getting mail and sending just fine. But who wants to use a G4 imac and iBook:)
    Obviously I have a setting wrong.
    thanks,
    Al

    Hi,
    What Authentication are you using on this SMTP? If not already, try using None, and removing Password and Username from SMTP setup for at least one test. Most Roadrunner SMTP are authenticated by reference to the IP address of your Modem, and using a separate authentication of the SMTP results in failure.
    Mail Preferences/Accounts/Account Information, then click on the arrows beside the name of the SMTP in the section on Outgoing Server. After you click on the arrows, choose Edit Server List. Then if the SMTP is set up with the correct name, etc, click on the Advance Tab, use Custom Port with Port 25, None as authentication, and do not enter any Username and Password. Under authentication of None, the name of the SMTP will not have your Username appended.
    Let us know, but Roadrunner can vary from area to area on this, but this is the way it seems to always work.
    Ernie

  • Paid or free apple support if ipad2 is purchased from a non-apple store?

    I am thinking about purchasing an Ipad2 from a non-apple store (i.e. Best Buy, Target, etc.).   Does anyone know if one has to pay for apple support if the ipad2 is purchased a non-apple store or is it free?

    You are entitled to 90 days of free phone support when you buy the iPad - no matter where you buy it. When you activate the device, I think it is registered at the same time. But to be absolutely certain, I would register the device anyway.
    The iPad is warranted for one year from the date of purchase from manufacturer defects. Once again, it does not matter where you buy it.
    Best Buy and some of the other resellers do offer an extended warranty for additional price as does Apple with their own Apple Care plan.
    You can read this.
    http://www.apple.com/support/ipad/
    Message was edited by: Demo

  • I can't remove my Visa card and I don't have Money and hidden none please help me

    I can't remove my Visa card and I don't have Money and hidden none please help me

    Accepted forms of payment  >  http://support.apple.com/kb/HT5552
    Changing Account Information  >  http://support.apple.com/kb/HT1918
    If necessary... Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

Maybe you are looking for