Can PRIME-NCS-APL-K9 upgraded from 2.0 to 2.2

Dears,
I have Cisco prime infrastructure Appliance "PRIME-NCS-APL-K9 "  use this version 2.0.0.0.294 and have the following spec.
Total RAM Memory: 16278820 kB
CPU Core Count: 16
Disk 0: Capacity: 437.90 GB
can i upgrade it from 2.0.0.0.294 to CPI 2.2
Waiting your feedback plz.
Regards,

Users deploying the Prime Infrastructure physical appliance can choose from the Gen 1 or Gen 2 options shown in Table 2. The The Gen 1 and Gen 2 physical appliance capacities match those of the virtual appliance Standard and Professional options, respectively.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/quickstart/guide/cpi_qsg.html#53444
Table 2 Prime Infrastructure Physical Appliance Options
Physical Appliance Options
2.X Option
Gen 1
Gen 2 3
Appliance Image Format
Bare Metal/ISO
Bare Metal/ISO
Equivalent 1.x Option
Physical Appliance
Physical Appliance
Hardware Specifications
CPU (cores/threads)
8 C/16 T
10 C/20 T
Memory
16 GB
64 GB
Disk Capacity
4x300 GB
4x900 GB
RAID Level
RAID 5
RAID 10
Disk I/O Speed
200 MBps
200 MBps

Similar Messages

  • Problem after upgrade a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2

    I have upgraded a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2
    First I have installed the Path "ncs_patch-1.1.0.58-upgrade-pi_1.2.tar.gz" and then the
    "PI-upgrade-bundle-1.2.0.103.tar.gz".
    after the upgade I have got the Message "Upgrade Successful".
    Now when I start the NCS i get the following error message
    egghead/admin# ncs start
    Starting Network Control System...
    Unable to verify hardware.
    This may take a few minutes...
    Health Monitor is already running.
    Failure during Network Control System startup. Check launchout.log for details.
    In the launchout.log are this messages:
    Starting Health Monitor as a primary
    Checking for Port 8082 availability... OK
    truststore used is /opt/CSCOlumos/conf/truststore
    truststore used is /opt/CSCOlumos/conf/truststore
    Starting Health Montior Web Server...
    Health Monitor Web Server Started.
    Starting Health Monitor Server...
    Health Monitor Server Started.
    Starting Remoting Service: Reporting Server
    Checking for running servers.
    00:00 Check complete. No servers running.
    Starting Server ...
    Starting Remoting Service: Reporting Server
    The Report Server startup script is already running waiting for report server to start
    Starting Remoting Service: Reporting Server
    The Report Server startup script is already running waiting for report server to start
    Starting Remoting Service: Reporting Server
    The Report Server startup script is already running waiting for report server to start
    Starting Remoting Service: Reporting Server
    The Report Server startup script is already running waiting for report server to start
    have anyone an idea whats wrong?
    thank you for your help
    Kurt

    i have  the same problem
    NCS/admin# ncs status
    Health Monitor Server is starting.
    Reporting Server is Starting
    Ftp Server is running
    Database server is running
    Tftp Server is running
    Matlab Server is running
    NMS Server is stopped.
    SAM Daemon is running ...
    DA Daemon is running ...
    Syslog Daemon is running ...
    status
    I try it
    To get it back up and running do the following from the CLI.
    1. Stop the NCS
    2. Run 'ncs db reinitdb'
    3. Start the NCS
    but the status is the same

  • Can I get a free upgrade from photoshop elements 11 to the 13? I have 11 and my laptop is 64 bit. registered software bought aug 2013

    Can I get a free upgrade from photoshop elements 11 to the 13? I have 11 and my laptop is 64 bit. registered software bought aug 2013

    There is no free upgrade. You have to buy it.
    Mylenium

  • Can't figure out which upgrade (from 7 Pro) is smartest: 9 Pro? or X Pro?

    Can't figure out which upgrade (from 7 Pro) is smartest: 9 Pro? or X Pro?
    Should I just ignore the nay-sayers and go ahead with X Pro?
    Thanks in advance for anyone willing to bring me up to speed.
    Dharmamitra
    Kalavinka Press
    Optional & Extraneous background data:
    I've taken a break from book design, layout, and publishing since finishing 10 books 2 years ago (Kalavinkapress.org). But now I'm back into the thick of it with a another flock of long-doc books in my lap.
    Result, I'm now faced with upgrading my IDCS3 & Acrobat 7 Pro. (I'm still OK with my P-shop & Illustrator versions), but am utterly clueless about the advisability of Acro X Pro over the still-available Acro 9 Pro. (I've seen some fairly loud squeaking about X Pro problems.)

    It depends a bit on what you're going to use it for. I do mostly forms work and have both versions, but do most of my work with Acrobat 9, and even use Acrobat 7 for some things. There are some initial bugs with Acrobat 10 that need to be worked out, but I'd probably recommend it for most folks.

  • How can I obtain a complimentary upgrade from CS 5.5 to CS 6.0

    How can I obtain a complimentary upgrade from CS5.5 to CS 6.0?  I purchased CS5.5 and within a few months CS6 was published.

    I found the information on my own:
    http://helpx.adobe.com/x-productkb/policy-pricing/upgrade-policy-product-announcement.html

  • I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I requ

    I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I request it? Thanks!

    If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD

  • Can I install Windows 7 upgrade (from XP) to BootCamp?

    I currently use Snow Leopard and have a Boot Camp partition running Windows XP Professional. It was a pain to install, because I had the upgrade version, and you can't eject CDs from the optical drive during the installation process to put the old CD in to prove you already own a copy of Windows. Let's just say I found a way around that and was able to install XP which currently works fine.
    I am now considering trying out Windows 7. If I get it, it will be the upgrade version as well. Will it be possible to install that to Boot Camp from XP? I know there are issues upgrading from XP to Windows 7, in that it has to be a custom install. I don't care about losing Windows settings and files; in fact, I would much prefer to do a clean install. Does anyone know if that is possible using an upgrade CD or will I have the same problem of not being able to eject the CD to put an old one in during the installation process?

    If you thought what I was saying was off-base, perhaps you still don't understand my question, since none of your answers has addressed it.
    I don't want to do the "upgrade" process. I was very familiar, even before you posted several links saying the same thing over and over, that you can't do that from XP to Win 7 anyway, but even if you could you wouldn't want to. I get the difference of upgrade v. migrate, etc., etc. Please don't link to it again. That is not my question.
    All I want to know is this: If you are using an upgrade CD to install Windows 7 (as opposed to a full install CD, and not to be confused with the "upgrade" process), will there be an issue with switching it out during installation and not being able to get it out of the optical drive?
    When I clean-installed XP to Boot Camp using an upgrade XP CD, you couldn't do that, because it needed proof of a prior copy of Windows during the installation process and there was no way to switch out the discs. This was a weird glitch of needing to eject from the optical drive during the installation process but having no way to do so at that particular point in the installation. It had nothing to do with anything about Windows licenses, upgrade pathways, etc. It was a technical oddity because of the hardware.
    From Apple support site re. XP and Vista with Boot Camp:
    "Important: _You must use a single full-install Windows installation disc._ Service pack 2 is required for Windows XP installations. Do not install an earlier version of Windows XP and attempt to update it later to service pack 2. Use only 32-bit versions of Windows."
    You don't need to answer this. BlueDevilKurz somehow understood exactly what I was asking and responded several posts ago as well as anyone can until Windows 7 is actually released and we know for sure. But if you want to, it's a Yes or No question, with a second bonus Yes or No question.
    1. Can I use an upgrade Windows 7 CD/DVD (rather than full install media) to install Windows 7 on a Boot Camp partition that currently has XP?
    2. Can I use an upgrade Windows 7 CD/DVD (rather than full install media) to install Windows 7 on a Boot Camp partition that is currently empty (no XP installed)?

  • Where can i find documentation for upgrading from sytem 9.2.0.1 to 9.3.0

    Can anyone help me with this part ? I am looking for documents to upgrade from 9.2 to 9.3
    Thanks
    Jay

    All of the curent Hyperion docs can be found here:
    http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_1.htm

  • Can someone assist me in upgrading from CS2 to CS4 PC version?

    I have loaded the CS2 version on my PC and now I want to upgrade to CS4 master using the upgrade version.  I have serial numbers for both versions but when I tried to load the CS4 upgrade, the system said it could not find the old version.  I had to input the serial number of the software I was upgrading from but CS4 only gave me two version options, CS3 and CS3 upgrade.  When I input the serial number of my CS2 version, the system said this is not a CS3 serial number.  So I proceeded to install CS4 as a trial version thinking I can later input the CS2 serial number.  Unfortunately my CS4 upgrade install ran into issues and did not install all of the main software (photoshop, illustrator, etc).  I tried to reload CS4 but ran into the same errors.  So now I have two issues, one is how do I get the system to take the CS2 upgrade and how do I fix the install issues so the full CS4 programs will load.  Please help.

    Troyboy8998 please contact our support team to verify the validity of your upgrade.  For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6.  Our chat representatives can provide a personalized experience to resolve the issue you have described.

  • Can I buy a Lightroom upgrade (from LR3) with a perpetual licence and a student discount? If so, which page do I need? Thanks.

    I am trying to buy a Lightroom upgrade (from LR3) with a perpetual licence and with a student discount.
    If I go the student discount route on the web U get taken to the 'cloud' options which I don't want.
    Any help would be appreciated.
    Thanks.
    PS Is the upgrade worth it in any case??

    I believe there are NO upgrades for Student and Teacher editions but you can see here: Products
    If the price is the same as an ordinary upgrade you are probably better off buying that because it can be upgraded in the future.

  • Topology View / Service with Cisco Prime Infrastructure 2.x "PRIME-NCS-APL-K9" ????

    Hi Team,
    Hope you all doing well.
    I just want know few thing about Cisco Prime Infra 2.x.
    1st thing is does CPI2.x support Network topology View? if not then is that any other feature which can provide Network View (exa :- Map,etc)?
    2nd thing is it possible to take Telnet/Ssh of discovered device from CPI2.x then how we can do that?
    3rd Thing if we want to add third party device in CPI2.x then what are prerequisite for the same (Vendor MIB, etc) and procedure?
    Your help will be appreciated.
    Thanks,
    Vishal

    Hi Vishal,
    Since you don't have any data as such on PI 2.1 , go ahead installed PI 2.2 on the Appliance.
    Yes , you need to download , the .ISO image and burned it on DVD and start the installation.
    here is the download link::
    https://software.cisco.com/download/release.html?mdfid=286236028&flowid=72882&softwareid=284272932&release=2.2&relind=AVAILABLE&rellifecycle=&reltype=latest
    You need to check if you are entitle for download or not.
    Can we installed PI 2.2 from current PI 2.1 GUI access? No , it is not possible.
    check these links for installation step::
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/quickstart/guide/cpi_qsg.html#pgfId-43441
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/hardware_install/guide/Cisco_PI_Hardware_Appliance_Installation_Guide/cpi_higmain.html#pgfId-1062344
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ****

  • Can a CS5 Professional license, upgraded from CS2 Educational license, be transferred?

    As I understand it:
    1. Educational Licenses cannot be transferred
    2. If you upgrade an Educational to a Professional, it replaces the old license (stop me if I'm wrong)
    So, I just want to know if the newer, Professional license can be transferred to another person, just like any other professional license?

    Once one has a full license (they are not known within Adobe as a professional license), it does not matter whether it was obtained via an upgrade from an academic or educational version or not. The license has the same transfer privileges as if the full product, not an upgrade, was purchased. Once the upgrade is completed and you transfer the license, you may no longer use the original academic or educational license.
              - Dov

  • WiSM can't function normally after upgrading from vesion 6.0.182 to 7.0.220.

    I have a WiSM installed in WS-6504E, vesion 6.0.182. It can't function normally after upgrading to version7.0.220.
    When it was unstable, I found three strange condition
    1. A lot of log looks like this
    *osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:370 Failed to open the file : /proc/1059/stat.(erno 24)
    *osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-TASK_GETTIME_FAILED: osapi_task.c:3431 Failed to retrieve statistics (/proc/<pid>/stats) for task 'fmcHsTask'
    2. Internal Temperature was showed "sensor failed"
    3. CPU User load is Zero
    Anybody can tell me what wrong with the wireless controller ?

    Could be a hardware failure.

  • Cisco Prime Infrastructure 2.1 Upgrade from 1.3.0.20

    Hi,
    We have a full fledged CPI 1.3.0.20 running with about 150-200 buildings worth of wireless data. We need to upgrade it to 2.1 version to make use of the 702W APs WPPs. The upgrade is failing in a boot loop again and again no matter what we do. We have setup CPI as a vm on vmware esxi 5.1. See the brief below of what we have tried:
    Option 1: Inline upgrade: installed the patch on 1.3.0.20 (required for upgrade to 2.1), then download and install 2.1 upgrade file on it, and after it finishes the installation and goes for reboot, it starts boot loop.
    Option 2: Migration option, Create a vm ova template on the esxi host for the 2.1 install from scratch. but here also, when its reboots after the final installtion, it ends up with the same boot loop. Has someone experienced this before, or atleast something you might want to share regarding this would be great.
    Thanks
    Lovleen

    Well, although it failed in the test/dev  environment, but we successfully upgraded in the production environment, as we tried it in parallel with the running CPI, and only tuned it off, once we were happy with the 2.1 system
    So, what we did, deploy 2.1 ova standard version, and use thin provisioning, and it installed ok, although it took about 20-30 minutes after the installing ncs stage and it looked it was in boot loop, but i left it for some time, and it was all fine after about 30 minutes at that stage, I think it boots it self up few time to install some services etc.
    Then I ran a backup on the original CPI 1.3 after installing the patch file (required for restore to a 2.1 system), aand used that backup to restore onto the new CPI2.1 system.
    I followed exactly as it was in the Cisco 2.1 documentation.. I suspect the vmware infrastructure in our test/dev might be the reason (as the available resources were just enough for the ova system requirements).  for the first time boot loop issue that we had, and we had also used thick provisioning that time..
    Can you try a thin provisioning install and then see if you have any luck.
    Give it enough time when you see it is boot loop, it might be more time based on your network infrastructure.
    The above process in this comment, I have double verified it 2 times, and both times was like smooth as.
    Good Luck. Let me know how you go on.
    L

  • Prime NCS 1.3 - Restore from 1.1.0.58

    We are facing some issues in restoring NCS backup. We did a fresh installation to NCS 1.3 and tried to restore the backup from previous version 1.1.0.58, but getting below error immediatly after stage 2 ..
    RGT-DC-NCS/admin# restore 24Apr2013-130424-1446.tar.gpg repository defaultRepo application NCS
    Restore may require a reboot to successfully complete. Continue? (yes/no) [yes] ?
    Initiating restore. Please wait...
    Stage 1 of 9: Transferring backup file ...
    -- complete.
    Stage 2 of 9: Decrypting backup file ...
    -- complete.
    % Failure occurred during request
    RGT-DC-NCS/admin#
    Any idea about this error and please let me know this 1.1.0.58 backup can be restore to 1.3 version ?

    It sounds to me like you didn't have the upgrade patch installed or if you did, it doesn't sound like you did a restore of the DB once you installed the upgrade patch. 
    If this is the case, here's what you'll need to do.
    You will need to restore the 1.1.0.58 backup back into a 1.1.0.58 server then get it up and running.
    Then,
    if you haven't installed the upgrade patch then do so.  Once you have the upgrade patch installed you have to take a backup once the patch is installed then restore the backup right back on top of the patched application. 
    if you have installed the upgrade patch then you need to take a backup once the patch is installed then restore the backup right back on top of the patched application.

Maybe you are looking for