Can print book with Shutterfly from Aperture?

Hello!
We have a collection of photobooks printed with Shutterfly, and we like their covers very much, much nicer than the Apple covers.
I have moved to Aperture, and am wondering if there exists a plugin or somehow an option to print a book with Shutterfly directly from Aperture. That would be more convenient than having to upload the JPG photos into the Shutterfly interface.
Any input you may have will be welcome.

Does [this|http://www.google.com/search?client=safari&rls=en&q=aperturetoshutterfly&ie=UTF-8&oe=UTF-8] help?
Regards
TD

Similar Messages

Anyone else also still having problems to order a printed book with pictures from iPhoto? Can you help?

When I try to order a printed book, I can not get any further than to "check out". Then I get "oops the store is temporarily unavailable". It has been like this for the past two days.
Everything else works on the Macbook Air. Mail, iTunes, surfing etc

Also what print product store are you trying to order from? Give this fix posted by another user a try:
Quit iPhoto.
From the Finder menu bar, choose Go > Utilities to access your Utilities folder (or press Shift-Command-U).
In your Utilities folder, open Keychain Access.
Find the "NetServices" entry in your Keychain Access window.
Select the "NetServices" entry and press the delete key.
Reopen iPhoto and attempt to place your order again.
You should be prompted to enter your account information if you deleted the Keychain entry successfully.
After entering your account information, you should be able to complete your order.
Also read this Apple document: iPhoto: Difficulty submitting a book, card, or calendar order
OT

HT4356 can i airprint to my airprint printer remotely, with ipad, from another wifi connection or only when i am within my own network?

can i airprint to my airprint printer remotely, with ipad, from another wifi connection or only when i am within my own network?

Air print, and the normal hp airprint set up requires that the pad and the printer be on the same wifi net work. The 'connecting' is done by your router. That means remote printing wont work with the out of the box stuff. I think you might find some 3rd party apps that do support remote printing, but i have not seen any reports from users that found a really good solution. Print n share reads like it might work, i am sure some users will chime in.

My iPhone and my iPad are connected by wi-fi, but I can't print on HP Officejet Pro 8500A Plus. On the other hand, I can print over wi-fi from PC. What can I do?

Hallo, thank you for trying to help. Here is my problem:
In the past, the airprint was possible without problems from iPhone 4 and iPad 2. Since today it doesn't work anymore. My iPhone 4 and my iPad 2 is connected by wi-fi and I can serve in the internet. But I can't print on HP Officejet Pro 8500A Plus. On the other hand, I can print over wi-fi from PC.
There are low ink-levels and therefore a message comes to indicate this by printing from PC. iPhone and iPad are accepting the print order without any messages after, but does't excecute the print.
What can I do?

Hey helmut,
You can also try the ePrint method listed here if you can't get AirPrint working:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02641898&cc=us&dlc=en&lc=en &product=4116838&tmp_track_link=ot_search
The application HP home and biz app is free in the app catalogue!
Hope this helps.
I work for HP.

Can a photo be exported from aperture in CMYK profile

Can a photo be exported from aperture in CMYK profileas TIFF jpeg PSD etc .?

Yes, in the export dialogue panel pick a TIFF or PSD setting, and then set the colorsync profile selector to a cmyk-profile,
You need to have installed cmyk-profiles, however;
most of my colorsync profiles were installed by photoshop.
You will find the cmyk-profiles in the system library:
/Library/ColorSync/Profiles/
Regards
Léonie

How can i speak with someone from apple live chat??

How can i speak with someone from apple live chat??I want to ask something

Yes, that is the key to it. In North America live chat is available, though I would question the value of it. It usually takes ten times longer to 'chat' than to talk or even send an eMail. Why don't you ask your question here; by far the most realistic means of attracting a reasonably accurate answer.

I have elements 12 Mac and I can not print 4X6, it comes out 8X10 using HP 5270. It was fine until now. I can print 4X6 with iPhoto. Help!

I have elements 12 Mac and I can not print 4X6, it comes out 8X10 using HP7520. It was fine until now. I can print 4X6 with iPhoto and off the printer scanner. Help?

I should add that it's an HP photosmart 4280.I found it online and it shows the Mac 0SX operating system.

Can I make a hardcover book with pictures from my ipad or do they need to be on my desktop first?

I am having trouble putting pictures from my ipad onto my desktop. I could use the memory card of my digital camera, but I was hoping the folders would transfer intact from my ipad. Also, Can I make a Shutterfly type book directly from my iPad?

There is a Shutterfly app for iPad ... although I have no personal experience with it, I see it has not been updated in about 16 months, and it doesn't have such great reviews.
There is also an iPhoto app for iPad that probably enables book creation.
So there are probably other apps out there as well, given these two exist.

Can I print book with text blocks instead of photos?

I have spent all day creating a book to print which included a photo on front, poems in place of photos on all pages (which I'd previously made into jpgs by creating layers in photoshop). I get to the ordering stage and I get an error window saying:
DEFAULT TEXT: your book appears to have default text that has not yet been edited. Printed books will not include this text. Do you want to continue with your order?
SO what does the above mean exactly?
And is it not possible to print text pages instead of photos?
Iphoto doesn't appear to give an open to type text on each page, but maybe iphoto 6 (iLife) does???
And how come it's not possible to ship my order internationally?
Thank you in advance for your help in answering my questions

I haven't printed out an iPhoto book myself, but the message you are getting seems to indicate that you did not fill in some parts of page templates. If so, then those parts will print blank even though iPhoto shows them containing default text. You probably wanted them blank anyway, though.
As for using iPhoto to print out a book with only one picture, that is probably doing things the hard way. If you want to print a book of text, there are now web options to do so costing about the same as an iPhono book. I don't think iPhoto is going to add templates sson for non-photo books.
As for overseas shipping, that is probably an issue of duties and shipping costs. Many US sellers on the Web will ship only to the US or perhaps Canada.

Trouble printing booklets with Indesign from CS4

Hello. I am trying to print a booklet from indesign. It is 12 pages and I
wish to print it on 8.5 by 5.5 booklet. The file was produced on 8.5 x 11 pages and I want to print 1 spread to each landscaped 8.5 x 11 sheet. When I try to do this using 2 page saddle stitch setting, it prints each spread in a portrait orientation on one page. Also, when I do manage to get it to print a spread to each page, it doesn't print all the pages. My printer is a Xerox workcentre 7428. I downloaded a global driver to Windows parallel in order to access the fold and staple mode of the printer, as my regular printer driver doesn't allow these settings to show up. Can anyone help me?

What's really strange is it used to work. I can't recall what my settings were to make it work. Anyhow, the document was created as pages in consecutive order as I would want them to appear in the book when a person is reading. Pg 1, pg 2, pg 3, and so on. The problem is that each individual page is portrait oriented 8.5x11 pages. The spreads used to print out properly until I changed my printer drivers to take advantage of the fold and staple function in the printer I am using. The old driver didn't see these parts of the printer. When I try to print booklet it messes up the printing so that it either prints the booklet as pieces of each page per page in a portrait orientation, or it doesn't print out all the pages! *sigh* Sending it to a professional printer is not an option, as the printer was purchased to provide us with a professional type print job. I'm going to try messing around with it a bit more and see if I can figure it out.
I'm not sure I understand the answers I was given. How does the print booklet setting differ from print.

I can print a test page from my Mac to my HP Officejet Pro 8600 but nothing else will print

Hi - I just recently had a hard drive crash and had to revert to an old Time Machine backup on my new hard drive to get my Mac back. Since getting back up and running I have been unable to get my Officejet Pro 8600 back online. My computer is wired to the wireless router but the printer is running wireless. My computer can see the printer just fine and I can even print a "Print Quality Diagnostic" report from my Mac to the printer from the HP utility. But nothing else will print. The firmware is up to date. I have tried resetting the printing system multiple times, rebooting the machine, etc... Nothing works. Any help would be appreciated.
If it helps, we were using a different printer the last time the time machine was backed up, so when we used that backup the old printer was showing, but I reset the printing system, so it shouldn't matter.
Thanks for your help!

Hello @Ryan221,
Welcome to the HP Support Forums! I see your hard drive recently crashed and now you are not longer able to print to your HP Officejet Pro 8600. I see you have reset the printing system with no success. Let's try a different approach:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. Click on the link below to begin the download and follow the on screen instructions:
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
I hope this helps, please let me know the outcome!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Is there any way to "Print book" with mixed version FM files?

Am fairly new to Framemaker and we all just upgraded to TCS and FM 9 from FM 7.2. After upgrade, when I went to "print book" and generate the postscript file, I found I had to re-save each FM file in the book to the current version before it would work. Plus, on each re-save, I had that extra prompt to tell it to continue each time (and then, of course, re-save the file). Is there any setting in FM 9 that will either create the .ps file without updating each .fm file to FM 9 first? Failing that, is there some way to do a mass update to FM 9? Failing THAT, is there a setting to temporarily eliminate that additional prompt on opening the older files?

This is what I do, but the dialog appears for each file, not once for all files. I just position my pointer over the Yes in the first box, click it, and do not move the mouse. Just have to click, click, click,... until all the files are open. Does not take long unless one of the files can't find a referenced graphic.

Ipad won't sync with photos from Aperture - library cannot be found

Ok I give up. When trying to sync my photos onto my new ipad from Aperture in iTunes I keep getting the message "iTunes cannot sync photos to the ipad because your Aperture Library could not be found. Open the preferences window in Aperture and enable the preference to share previews with other applications. Well the library is where it should be in the Home folder and then pictures. I have the latest version of iTunes and Aperture. The only similar setting I can find in Aperture preferences is under Previews and Share Previews with ilife and iwork, no mention of itunes?
I've gone into my Aperture show contents and deleted the cache folder ipod photo cache (I previously synced to my iphone 3GS). It works syncing to iphoto, as I have tested it and the iphoto is in the same folder as the Aperture library so they are in the right location.
I am now at a loss as to what to try next......PLEASE HELP ME....
I don't want to have to have a Aperture library and an iphoto library on the go!

Hi,
iTunes cannot sync photos to the ipad because your Aperture Library could not be found.
If you have an external drive connected to your Mac, disconnect that, restart your Mac, restart your iPad and try syncing photos from Aperture.
Carolyn

Editing with Photoshop from Aperture - getting it back into Aperture

I have Aperture 3, and Photoshop Elements 9 & 10, but for some time now, when I send a photo from Aperture to Photoshop I have problems. The photo opens in Photoshop fine (set as default in Preferences), but when I save the file in Photoshop, it simply opens a 'save as' dialogue, and expects me to save the file on my hard drive somewhere. Even doing this doesn't 'send the edited photo' back to Aperture as it should.
I'm sure I'm missing something obvious! Can anyone help?
Thanks...

I got the same "save as" window the OP did when I pressed Cmd-S (save). I even cancelled out the first time, thinking I'd accidentally pressed Cmd-Shift-S (save as), and went up to the menu to select Save to be sure. The dialogue box still came up.
You can see the file (a PSD in my case) along with with the masters listed in the folder that the dialogue box defaults to, so it's not an issue with the file not being saved upon creation by Aperture. The file does already exist. Trying to save it prompts a "save as" style dialogue box though, as if it wants you to save it as another version. It's weird.
I'm pretty new to Aperture, so I don't know for sure that this pop-up save window behaviour is new, but it sounds like it is (the manual doesn't mention it). Until someone states they are experiencing this with Snow Leopard, my guess is that it's a Lion/versions thing.
Doug

Can't upload to flickr from Aperture 3.5.1

I've just recently tried to upload to Flickr from Aperture 3.5.1 and am getting an error message:
"Aperture is no longer authorized to use the Flickr account "Michael Meyers" Do you want to set up publishing to this account again?"
I then click on the "set-up" button and am taken through to Safari to login to Flickr. I can do that successfully but then get a message saying "Oops! Flickr can't find a valid callback URL."
So it looks like there is no way for me to export from Aperture to Flickr.
This might have something to do with the Flickr API changing to use SSL only but I can't really be sure since the error messages aren't that descriptive.
Any ideas?

Check, if the "Primary Only" flag is active. If yes, disable it.
With this flag active, only the primary image will be effected by edits.
See: Keywords or ratings are applied only to one of the selected images - why?

Can print book with Shutterfly from Aperture?

Similar Messages

Maybe you are looking for