Can print popups, but they're halfway off the page

Greetings,
Using Acrobat 9 Extended and have received edits (Text edits and sticky notes).
I figured out how to print the comments on the page, but even though the balloons are on the left-hand side of the page, the popups appear on the right. I wouldn't mind, except that they also print on the right, actually halfway off of the page so I see half a popup.
Is there a way to have all popups appear in the center or something without having to go to each one and drag it?
Alternately, since I'm a flexible guy, I opted to print just the comments, and that went fine except for one thing: Each page's comments printed on a separate page. That means a page with 1 comment got an entire printed page of mosty empty space. I tried sorting by date, author, page, and whatever else it gave me, to no avail. Is there a way to just print the comments as a list without a lot of 90% empty pages?
Thanks,
Solon

You would not be able to get them back. They do warn you that this could happen at any time so it is your responsibility to have backups of everthing.

Similar Messages

  • I try to connect my galaxy 5 to my printer hp2540, but they ask me for the iPhone address

    I'm trying to connect my printer hp deskjet 2540 all in one series, to my galaxy 5 phone, but it asking me for the IPHONE address. Can you help me please?

    Hi,
    Please use the following instructions:
        http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02994632
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Have an iphone 3gs on 5.01 unlocked, was working perfect untill yesterday it started pl;aying up only makes calls when it feels like it and when i get a call out or in i can hear thm but they cant hear me, the mic is working cause i can make a voice note,

    need help

    Have you restored as a new device and tried your phone before you add any apps back?  If you do this and you're still having problems, then you are having a hardware malfunction and will need to bring your phone into Apple for evaluation and possible replacement.

  • I have an iphone 4 and cannot get my mute off when I am using Facetime. I can hear them, but they can't hear me. When I touch the mute button, nothing happens. Can someone please tell me how to fix this?

    I have an iphone 4 and cannot get my mute off when I am using Facetime. I can hear them, but they can't hear me. When I touch the mute button, nothing happens. Can someone please tell me how to fix this?

    the mute button is a switch you need to flip, not touch. if you look at it and see color, its on.

  • I have an iPad mini and an iPad 2. I can print email to my HP 6510 from the mini, but NOT from the iPad 2. Both are on the same wi-fi network. I have tried everything I can do including unplugging everything, restarting, etc.  Can anyone help?

    I have an iPad mini and an iPad 2. I can print email to my HP 6510 from the mini, but NOT from the iPad 2. Both are on the same wi-fi network. I have tried everything I can do including unplugging everything, restarting, etc.  Can anyone help?

    Thanks so much! My grandaughters played games on the iPad over Xmas and one of their moms said shed restricted their access! Guess they forgot to enable again. Thank you again! Karla

  • I am using Pages to print addresses but they  print too low on the envelope. How do I change this?

    I am using Pages to print addresses but they  print too low on the envelope. How do I change this?
    Help please!!!
    ANN

    Hi Isk8ter,
    Welcome to the Support Communities!
    What version of Pages are you working with?  I'm assuming '09 since you reference OS X 10.7.4 above.
    I've included the link to the Pages User Manual for you below.
    Page 253 starts the chapter on Printing, Shareing and Exporting your document.
    Pages '09 User Manual
    manuals.info.apple.com/MANUALS/0/MA663/en_US/Pages09_UserGuide.pdf
    Setting the Paper Size and Orientation
    Before you print, you should make sure the paper size and orientation are set the way you want by opening the Page Setup dialog.
    To set paper size and orientation:
    1 Choose File > Page Setup.
    2 In the Page Setup dialog, choose the printer you will use from the “Format for” popup
    menu.
    3 Choose a standard paper size from the Paper Size pop-up menu.
    Also, see page 266 of the Pages User Manual for more specific instructions for creating a custom template for envelopes.
    Hope this helps ...
    Judy

  • Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    Hey shahbazfromgbr,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    2. Make sure the Ring/Silent switch is not switched to silent.
    3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    9. Restart the iPhone.
    10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
    11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Thanks,
    Matt M.

  • Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly.  The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anyth

    Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly.  The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anything.  I have taken my car to my local dealer but they say the Radiosat is working ok?

    Hello there stidhambr15,
    I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't quite get the device going again, I recommend restoring the device.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
    iPhone and iPad: How to remove the SIM card
    http://support.apple.com/kb/ht5163
    iPhone 4 (GSM model)
    iPhone 4S
    Cheers,
    Sterling

  • My iphone 5s was stolen and i gps d it and found where it was but they turned it off and denied it and i googled how to open iphone 5s without passcode and a youtube video showed how, so now i am out of a phone that i just paid 300 dollars for becaus

    my iphone 5s was stolen and i gps d it and found where it was but they turned it off and denied it and i googled how to open iphone 5s without passcode and a youtube video showed how, so now i am out of a phone that i just paid 300 dollars for because i dropped my last 5s and the glass shattered and i didnt have any insurance. so now it seems like i am out again. i was sold on the fact that the fingerprint sensor would stop that from happening but they can just reset the phone and have it as theirs new. is there anything i can do to get my phone back.

    If you set up your phone correctly, it is still protected by the Activation Lock and can be used without knowing your AppleID and password.
    Here are some more things about that:
    What if your iOS device is off or offline?
    If your missing device is off or offline, you can still put it in Lost Mode, lock it, or remotely erase it. The next time your device is online, these actions will take effect. If you remove the device from your account while it's offline, any pending actions for the device will be cancelled.
    How do you turn off or cancel Lost Mode?
    You can turn off Lost Mode by entering the passcode on your device. You can also turn off Lost Mode on iCloud.com or from the Find My iPhone app.
    copied from If your iPhone, iPad, or iPod touch is lost or stolen

  • When i login to my mac, it opens iTunes, Skype and AIM. I've tried deleting these from the login items, but they are not on the list.  Can anyone help?

    When i login to my mac, it opens iTunes, Skype and AIM. I've tried deleting these from the login items, but they are not on the list.  Can anyone help?

    babowa wrote:
    If you do not lock that folder immediately after deleting all the contents, it will simply populate again (Resume - a "feature" in Lion). You do that by doing a Get Info (highlight folder and press Command + I keys), unlock the lock at the bottom, enter your admin password, then check the box to lock the folder. lock the lock and you're done.
    Yes, that is correct. The alternative is to quit all applications prior to logging out. Lion will then have a chance to remove the saved states.
    babowa also wrote:
    And, for the OP:
    It has also been a regular feature of Mac OS to automatically open any window that was open at shutdown. To avoit that behavior, simply close any Finder windows and  properly quit applications by closing their window and using Command + Q (or File >Quit).
    This was true only for the Finder. Prior to Lion, no other apps would launch unless they were included in the Login Items for the account. And the OS would not restore windows for other apps.
    A very small number of apps (TextWrangler is an example) implemented this capability prior to Lion. They could restore previously opened windows. But that is an application feature, and can be controlled by the application's preferences. Lion implements it at the system level, and users have virtually no control on a per application basis.

  • I had deleted some Apps on my iOS Devices (iPad mini and iPhone 5), but they are still in the Cloud. How can I delete them in the Cloud, too ?

    Hallo together,
    I had deleted some Apps on my iPhone and iPad, but they are still in the Cloud. My First iPhone was a 2, my Second a 4S and now I use a 5. With the 2 I had used a different Apple-ID, but I put some Apps via Backup from one Apple-ID to another. As I get a Message by furtherly Backups, that some Apps are not can be saved because the Apple-ID is no longer on that PC registred, I had deleted this Apps to get they new for the actually Apple-ID. But I'm not shure, when I install them now, that they are working under the correct Apple-ID.
    Any Ideas to solve the Probs ?

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622
    You cannot Delete from your Purchase history... But... you can Hide...
    iTunes Store  >   http://support.apple.com/kb/HT4919
    Note:
    iCloud only Stores a Link to your Apps...

  • I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

    I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

    Repair permissions and restart your computer.
    Make sure you have the updated scanner drivers installed. 
    Install the gimp drivers:  http://gimp-print.sourceforge.net/MacOSX.php 
    http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer 
    http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download
    What to do when you can't print

  • I can hear people but they can't hear me

    I can hear people but they can't hear me

    Usually issues that have to do with Call audio, dropped calls etc, need to have the SIM Card/service ruled out first.
    Take the SIM card out of your phone and put it in another to see if issue persists. If it does then its something with your location/service and you need to contact your service provider.
    If it does not persist in the other phone then you will want to do a reset and then a restore if issue persists.
    #1: Reset: http://support.apple.com/kb/HT1430
    #2: Restore: http://support.apple.com/kb/HT1414
    Also a simple phone restart will fix 9/10 issues like that.

  • HT2188 I can hear caller but they can not hear me except when using speaker phone

    I can hear caller but they can not hear me except when using speaker phone

    First of all,  make sure that your iPhone as the most recent iOS available. Check in "Settings>General>Software Update".
    One other problem could be your microphone. Does it work for anything else other than a call?
    Good-Luck!
    kpower28
    Please mark this as "solved my problem" or "helped me"!

  • I can hear caller but they can not hear me

    I can hear caller but they cant hear me

    First of all,  make sure that your iPhone as the most recent iOS available. Check in "Settings>General>Software Update".
    One other problem could be your microphone. Does it work for anything else other than a call?
    Good-Luck!
    kpower28
    Please mark this as "solved my problem" or "helped me"!

Maybe you are looking for

  • How do I add a film site to my Apple TV

    I have Apple TV running and am receiving Netflix.  How do I add Lovefilm (or any other film streaming site for that matter) to the list?

  • HP Mini: (Missing Keys) No PgUp Home or End, Never Buy HP Again !

    Q: Guess who caused me several hours of necessary work this week, and possibly more to come ? A: The utter geniuses at HP, who designed a "netbook", without the keys that people use most on the net ! The provided shortcut hotkeys ( fn + arrow ) for t

  • ORACLE Client Installation(ODBC Driver) 8.1.6

    I've been having some difficulty installing Oracle 8.1.6 client on Windows NT4 SP5 machines. The installations would go successful all the way 100% then exits!!! All the appropriate files are copied to their directories and I am able to launch Net8As

  • Having trouble booting and general usage

    So I've got an intel iMac running Windows 7 Professional and 10.6 The computer will randomly stop working while I'm using either OS, just kind of freeze for a few seconds to minutes and then all of a sudden will act responsive again. So I tried reins

  • Striping a string in plsql (IMP)

    I am gettng a string like this as a parameter in Oracle procedure record=100;doll_val=2000.10;quantity=50; and I have strip the information like this record 100 doll_val 2000.10 quantity 50 I am trying to use Substr and instr function but it is getti