Can print to shared Canon iP4300 via Bonjour - but not with Canon driver

I've searched the forums and therefore know roughly what the problem is, but still need some concrete info please...
Have finally managed to share my Canon iP4300 connected to iMac (10.5.2) via USB and print to it from XP, using Bonjour for Windows. However... when I run the printer assisntent it finds the printer but only offers me the choice of a generic driver. The driver turns out to be labelled "HP Color LaserJet 4550 PS". A postscript driver?!? Well, it works, but I'd really prefer the proper Canon driver (which is already installed - I previously had the printer connected to the PC).
Yet, when I select this driver retrospectively (from the printer-share properties dialogue), I cant print. This, if I understand correctly is because the Canon driver doesn't support Bonjour?
So is there anything I can do? Eg. I've read about the Gimp drivers, but they're only for OSX right?
Maybe this generic "HP" driver will be adequate (haven't printed anything properly yet) but would like to know if anybody has suggestions other than contacting Canon (which I will do anyway).
Cheers

I Have the same Problem as you,
I Have the Canon MP180, and i have the driver on my windows XP Laptop
But when i try to connect to it, using Bonjour (as the printer is connected to the mac) it uses a HP Color LaserJet 4550 PS driver even though its Canon
Does anyone know how to use the proper driver.
It works ok using the HP Driver, but the quality of the printouts from the windows XP laptop seem rubbish
Many Thanks
Alex
P.S if you got this working, can you send me a message back.

Similar Messages

HT4356 I can print from other applications on my iPad but not from Dropbox

I can print from my iPad using other applications but not Dropbox

Is your printer one of the models listed here: http://support.apple.com/kb/HT4356

I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

You could try using the DNG converter 8.7 on Windows vista:
<Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7>
<Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7>
You then need to watch this video to get hang of it:
<Camera Raw: How to use Adobe DNG Converter - YouTube>
Hope this helps.

Mac 10.6.3 with Firefox 4.0.1: Can print from Word, PDF, Screen Shots, etc.--but not a web page. My Canon MP610 shows correctly as default printer.

If I use AOL's browser, I can print Web pages. But not from Firefox. Could be this problem began with upgrade to your 4.0.1.

If I use AOL's browser, I can print Web pages. But not from Firefox. Could be this problem began with upgrade to your 4.0.1.

User Authentication Failed via http BUT not with Visual Administrator !!?

OS : Win 2k3 Server UK * DB : SQL Server 2005
SAP Netweaver 2004s Application Java
Hi All,
Since a couple of days, I have a problem concerning authentication to the java apllication on a SAP Netweaver 2004s.
Using the user Administrator, I CAN logon the Visual Administrator tool, with the same user I tried to logon via http://host:port/nwa without success.
At the beginning, I was thinking about a problem of password then I enabled the emergency user SAP*, the problem was the same. Ok with Visual Administrator but not via http.
Here is two logs found in folder : D:\usr\sap\SID\JC02\j2ee\cluster\server0\log\system\
 security.3.log
 #1.5#001871E5EA3A00550000006D0000172800043B836D838427#1191335570983#/System/Security/Audit#sap.com/com.sap.security.core.admin#com.sap.security.core.util.SecurityAudit#Guest#0####5aac137070f411dcc513001871e5ea3a#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest | LOGIN.ERROR | null | | Login Method=[default], UserID=[Administrator], IP Address=[192.168.10.125], Reason=[Authentication did not succeed.]#
 server.0.log
 #1.5#001871E5EA3A0052000000130000172800043B835E3661D1#1191335314249#/System/Server/SLDService##com.sap.sldserv.SldServerFrame######c1a349a070f311dcaa68001871e5ea3a#SAPEngine_System_Thread[impl:5]_71##0#0#Warning#1#com.sap.sldserv.SldServerFrame#Plain###Failed to collect SLD data. Failed to send HTTP data: 401 : Unauthorized. Please check if the target SLD system is available and the SLD bridge is started there.#
 I tried to connect http://host:port/sld same problem User Authentication Failed
Do you have an idea for me? Why a user can connect via Visual Administrator and not via the http interface?
Thanks in advance
Yves

Hi,
I found the solution this last week-end.
This behavior let's thinking to a problem of authentication.
But the problem was in SQL, an index was missing in table J2EE_CONFIG, called J2EE_CONFIG_I3
Cheers
Yves

Lightroom 5 is auto-developing our canon 7d raw files but not the canon 5d mark 3 files upon import.

Lightroom 5 is auto-developing raw files upon import on the canon 7d but not on the canon 5d mark3. I would prefer to do individual file developing in the develop module.

Go into preferences, select the Presets tab. Hit "Reset all Default Develop Settings". You probably by accident set a default Develop for the 7D. Also check that you don't have a preset selected in the import dialog.

I can home share to Apple TV via ethernet but not wireless. Please help!!

This has been driving me mad for a week now. I have an acer Laptop using windows vista. When I connect the Ethernet cable to my rout and laptop, home sharing works fine. But as soon as I disconnect and go wireless, Apple TV cannot find my library. My partner has a HP laptop that operates on windows xp. That works fine. can anyone help and give me a step by step guide with what to do? I've checked every apple forum on the matter and nothing seems to work. I figure it's got something to do with my wireless Internet settings. It can't be the router if my partners library shares ok, right?? I've uninstalled macafee and even turned my windows firewall off. But surely these weren't problems in the first place if Ethernet connection works?!? Am not very tech savvy, so any simple things to check would be SO appreciated.

Homesharing should work over ethernet too, ask your network provider about homesharing, it may be that the university doesn't allow it.

I can still access my .mac email via Mail but not in iCloud

I set up a new iCloud email address and tried to add my old .mac address (via Manage your Apple ID) and get a message saying that "email address is already verified for another Apple ID".
I can still send and receive emails on my older .mac account via Mail, my iPad and iPhone. I just want to be able to read my .mac email in a browser if I were to lose the other devices.

Try simply dismissing the popup by hitting cancel and then Get Mail from the account in question.
See also
http://applehelpwriter.com/2012/01/17/mail-wont-remember-passwords/

Time capsule USB printer works when I connect via ethernet but not over wifi

I have a USB printer hooked up to my new Time Capsule. If I turn off my wifi and connect to the Time Capsule with an ethernet cable it works fine. When I try to do the same thing over wifi (even when I'm sitting next to it) it cant seem to make a solid connection. Most of the time it just says Printer Paused, but sometimes it will work, other times the printer just clicks, or starts but then stops. Other than that my wifi connection seeems pretty good.
Is there something with the settings with my older "08 MacBook and the newer Time Capsule?
Any help is very much appreciated,
Thanks

Very interesting one..
Did you upgrade install ML into the MB??
It sounds to me like it has corrupted the wireless drivers.. and I think you will need to do a clean install.
If you have internet working over wireless I see no reason for this to happen though.

Report running fine via se38 , but not with tcode.

I had made a alv report, and had assinged TCODE.
When running via tcode > in selection screen i had given all the input data in selection fields,>After that when clicking the execution button> ITS GOING BACK TO SAP SCREEN.
BUT.
SAME report when running through SE38, its running fine..
I had debugg the program , and what find that when running throug TCOde , After AT-SELECTION SCREEN EVENT , ITS COMING OUT TO SAP MENU WITHOUT TRIGGERING THE START-OF-SELECTION EVENT.
HELP ME...

Please follow the steps for creating a transaction for report..
GOTO SE93
Give the transaction code.
Press create button..
Enter the short description..
Choose the radio button which says "Program and selection screen(report transaction)".
Press Enter..
Give the program name..
Remove the Selection screen "1000" if you want.
Save the transaction code..

Can watch You Tube vidoes on Internet Explorer but not with Firefox. Why?

This problem has only cropped recently. I don't seem to be able to watch online vidoes - you tube & others - with Firefox (I have the latest version 32) anymore. They start loading & playing & then sit there trying to load but won't go any further. On the other hand, I can use my older version of Internet Explorer to watch the same videos not problem. The play smoothly without stopping & starting. They play as the load. What had changed with my Firefox please? How do I fix this? I am still using Windows XP so prefer not to use Internet Explorer anymore. I hope someone had a simple answer and I don't have heaps of time to trawl through all the questions & answers on the forum! Thanks in advance :)

Hello,
Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. [[Image:fpSettings1.PNG]] 
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Also, unrelated to Flash, the latest version of Firefox is version 33, you can update either by going to:
* Help (or [[Image: New Fx Menu]] > [[Image: Help-29]]) > About Firefox
Or download a fresh copy at:
* https://www.mozilla.org/en-US/firefox/new/
* (if you need a different localization) https://www.mozilla.org/en-US/firefox/all/
Does this solve the problem? Let us know.

"Untrusted Connection" appearing for any website via Firefox, but not with IE

No replies solve the problem. Where's Mozilla's response.

hello, first please make sure that the date & time is set correctly on your system. if this doesn't solve the issue (or it is already set properly), a possible solution depends on different factors:
* what is the '''error code''' shown under ''technical details'' on the error page?
in case the error code equals ''sec_error_unknown_issuer'', please attempt to add an exception on the bottom of the error page & inspect the certificate (see the screenshot attached for instructions):
* which '''issuer information''' does the certificate contain?
thank you!
[["This Connection is Untrusted" error message appears - What to do]]

I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working

I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working

I have also tried repairing Bonjour in adminstrative tools and still a no go! Frustrated!!! Looking for another idea

I purchased an album from the itunes store on my ipad2 thinking i could retrieve it from my windows pc. I have turned on home sharing and can see my pc library from the ipad but not vice-versa. Is there any way to transfer the album from my ipad library?

I purchased an album from the itunes store on my Ipad2 thinking i could access it from my windows laptop where I sync my ipod. I turned on Home Sharing and can see my laptop libraries from my ipad but not vice versa. Is there any way to fix this so I can transfer the album to the itunes on my laptop?

Yes I tried that. I finally turned off all home sharing settings, shut down my desktop and found them in my account settings in the store on the cloud. So at that point I just had it download everything. But I suspect that with the ipad somehow being on, the store was saying I had already received them? Regardless, my trip today whilst running errands, I was rocking out to vintage Police music! Thank you so much for responding.

HT3669 Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. Can someone please advise me how I get the printer to work with my i-Mac? I have installed it but documents don't print. Thanks

Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John Lee

Looking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page.

Can print to shared Canon iP4300 via Bonjour - but not with Canon driver

Similar Messages

Maybe you are looking for