Can Print to Video HDV sequence

Hello, I am trying to export an HDV sequence to a miniDV tape for broadcast. I am using a Sony GV-HD700 tape deck. I am using Print to Video and it just wont work. Any help would be appreciated, thanks!

I am having this same problem, and need help urgently. Does anyone know how to resolve this? I can control the deck through FCP and the FireWire cable, and can even initiate automatic recording from FCP, but once it starts playing the content the deck freezes and does not actually record anything.

Similar Messages

Print to video / HDV sequence

I am about to export a hdv sequence to my z1.
I have to make a master tape for broadcasting.
I normally export my commercial hdv work to mpeg2 and make a dvd....
To make a master tape for tv broadcast I need to make a dv camtape.
How do I create a dv cam master with the right 16;9 aspect ratio and the leat quality loss?
I understood that I can not use edit to tape. So print to video is my only option....
I thought of first rendering the hdv sequence to an appropriate format.
Which format should I choose. Is pro res an option?
Any expert out there.
Advice hightly appreciated.
thnx
xx
Jane

I think what you should do is put the HDV sequence in a DV sequence, then after rendering just lay it out to tape. You could also send it to compressor for the tranfer, but don't think there's much difference if any, in quality. It should end up letterboxed.
Jerry

How can i download video hdv minicassette footage from my sony video camera with no fire wire port?

How can I download video HDV minicassette footage from my sony video camera with no fire wire port?

Hi,
Are you talking about your computer which has no firewire port ? If YES you can have one of two options:
(a) Use FCI - Firewire card like this (preferred)
You can buy from this:
http://www.ebay.com.au/itm/2-Ports-PCI-Express-PCI-E-IEEE-1394A-Firewire-Adapter-Cable-Card-/1507023...
(b) You can also use USB-Firewaire adapter like this:
http://compare.ebay.com.au/like/120580625092?ltyp=AllFixedPriceItemTypes
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Print to video HDV not working

I'm having problems with printing my HDV project to the camera.
On a DV project it works, but when I open my HDV project I cannot choose any external video options,
I can log and capture, but not the other way.
I read that the edit to tape function does not work in HDV, but printing to video should.
Just don't know how
Maybe someone can help me
Thank you!

If it's a sony camera involved, select the "Easy Setup" that matches the sequence setting... like 1080i for example, and see if this doesn't clear things up. Make sure the camera is in VTR mode as well. If it's not a Sony camera check the settings it uses here: http://www.apple.com/finalcutstudio/resources/devicelist.php
Jerry

Print To Video HDV dropping out

When I try to print to video from the computer to a Sony HDV 1080i deck it goes and conforms all the video then I start the process and it works fine until a certain spot and will go to black then back on again etc.
I've tried this a few times and at the same spot will get the problem so I checked to make sure it wasn't the tape, I threw away the rendered files and re-rendered them again. I even saved the project to a quicktime movie which played back looks fine. I tried to use the quicktime file and it stops at the same place everytime.
Any suggestions?
I even went and rendered all of my sequences, mixed down the audio etc.
thanks in advance!
Just recently went from FCP 5.1.2 to 5.1.4 I did another project last week and the print to video worked out fine I was wondering if this was a bug in 5.1.4?
Using FCP 5.1.4

conforming and decoding the mpeg2 HDV stream seems to be the hardest thing for the computer to do. Enough RAM, and a beefy video card will help. I think it's a miracle every time I can get a batch of HDV clips to sucessfully capture. Cutting doesn't go too bad, but I have found outputting native HDV to be nearly impossible.
We had about 3 hours worth of 10-15 minute segments to output, and it took close to 3 weeks of constant effort, outputting one sequence at a time. It would black out, stop playing back, freeze up, put all kind of breaks in the timecode even if you pre-stripe the tape. And all the while it would never, ever alert or abort on dropped frames, timcode breaks, etc.
One of the big problems was rendered material. I used a page peel transition (I know, I know, it was a video cookbook, gimme a break) in the HDV segments. I took the time to set up each one with an image for the "back" of the page from the context of the segment. Rendered playback from the timeline looked fine, but as soon as I went to tape, the background of each peel would display whatever image I had most recently applied - all of them - but only on output. I wound up having to replace the backgound of each one one at a time, export each transition as a self-contained movie, bring it back in as clips and re-sync it with the surrounding media. Luckily there were only about 150 of them to do. All this I started doing after the first solid week of failed output attempts. Even then, any rendered material in my sequences would trigger the dreaded dropouts, freeze frames, skips, and substituted rendered material. So after another couple days of attempts, I wound up exporting self-contained movies of every minute of my output, re-editing them back into sequences, and so finally I was able to output to tape in 10-minute chunks, and it only took 5 or 10 tries for each one. The only reason I really needed to go to tape in the first place was because I found impossible to transcode the HDV to SD mpeg for DVD without field artifacts, and abysmally unacceptible quality. So I recaptured the HDV as DV using the deck's downconvert, which seemed to be the only thing it could do well.
I believe that a faster computer with more RAM and a better video card would have made a big difference. Newer versions of FCP have probably solved a lot of the issues I had with the rendered material. Even so, there are aspects of the long-GOP, mpeg-2 stream aspects of HDV and the way that it negatively affects timecode, deck control, and capture and output, that make the format my last choice for professional editing.
For your situation, I'd recommend exporting a self-contained movie, maybe even try AIC, although it'll have to reconform back down to HDV for FW HDV output. Try all your various Mac voodoo steps before starting output - trash prefs, repair permissions, power-cycle everything. You can borrow my feathered headdress and tortoise-shell rattle if you want.
Sorry I couldn't provide a more definitive answer for you...
Max Average

Sony Z1 Print to video HDV problems

I researched several post on this topic and still can't get this to work. Here's my situation. I have imported and edited my HDV footage in the HDV easy set up in FCP 5. I now want to record this HDV sequence (in HDV format) back to a Sony Master tape using my Z1. I am working in a PAL environment and have dbl checked all my settings on the camera and within FCP and I still can't get the video to output. I just get a blue screen on my camera monitor. Can the Sony Z1 even record back to tape in HDV format? When I have the IN/OUT Rec setting set to HDV, REC MODE is greyed out. Only when I have this set to DV or Auto is the REC MODE open to changes. I have my camera set to VCR and the settings are these on the camera:
IN/OUT Rec: VCR HDV/DV is set to HDV (Thats what I want to record in, yes?)
REC MODE: Greyed out
Component is 1080i (Pal)
iLink is set to off
A/V to D/V Out is off
Final Cut Pro settings: (Audio Video Settings)
Summary Tab: Sequence Preset is: HDV-1080i50
Capture Preset is HDV
Device Control: Sony Firewire
AV Device Tab:
Playback Output Video: NONE
Audio: Default
"Different Output for Edit to tape/print to video" Certain settings are greyed out. On this it depends on what my camera is set to in the IN/OUT Rec setting.
Please, any suggestions would be greatly appreciated. Been trying to get this to work for days.
Tim

Tim Kuhlman-
Have you tested the camera with non-HDV just to make sure the camera works?
Luck-
-DaddyPaycheck

Print to Video HDV

Hello All. So about 6 mos ago I successfully printed video back to my XHA1, since then I haven't been able to connect my XHA1 to FCP at all. I have no problem getting the HV20 to mount. I have tried pretty much every possible set-up and still no luck with the A1. I am trying to print to video and can get neither camera to operate correctly. I have searched the boards and nothing seems to work. LIke I said I have tried so many different configurations w/o success. Does anyone have a tried and true way to print HDV 24F footage back to either a Canon A1 or HV20. Your help would be very appreciated. Thank you.
Jeremy

Well I stumbled on the answer to my problem, maybe someone else might learn from my mistake. When creating my storyline, I created the sequence with DV settings. All the resulting work was then in DV and it apparently will not convert to HDV without significant loss. My solution was to Easy Setup with HD and AIC 1080i60 then create the new sequence. I imported all my clips into the new sequence timeline. When I go to print to file now, the camera automatically starts to record with transcoding to HDV appearing while the video is copying back to the Tape. Just a newbie mistake but maybe someone else wont make the same mistake.

Print to video HDV Sony Z1

Hi
I am having a problem printing to video. I have my finished sequence and my camera in VCR mode - I have checked with log and capture for communication and I can control the camera fine. The camera acknowledges HDV/DV in and I don't have any playback selected. In the print to video it is set up for HDV1080 50i as is the camera so off we go, ticking the box for automatic starting - I print to video and it says conforming HDV video for about 18 minutes (5 minute sequence). When it gets to having done this (it seems to go through this twice) and all there is to do is press OK, it plays back full screen on the mac but nothing happens on the deck. A fresh tape is in there and the tab is out - what have I done wrong?
Any suggestions appreciated
Matt

Tim Kuhlman-
Have you tested the camera with non-HDV just to make sure the camera works?
Luck-
-DaddyPaycheck

Print to video HDV to SD widescreen

I need to print to video (to DVCam tape) my HDV project that was edited frame size 1440X1080 to SD widescreen. When I play out the timeline it is SD letterbox. I am a little confused with this, will it not be 16:9? The HDV thing is somewhat new to me.
After I exported the project to tape, I went to log and capture and it clearly is now SD 720X480 letter boxed. Is it even possible to export 16:9 or anamorphic? Can you tell I am a little lost?
I would appreciate any help with this.
Thanks

Export your sequence to a quicktime file, retaining the HDV sequence settings. Open the resulting quicktime file in compressor, and export using a 16:9 anamorphic SD setting of your choice. Re-import that file into FCP, set up a new sequence to match the 16:9 SD file, and print to DVcam.
Matt

Print to video - HDV 1080i60 to Sony HDR-HC1 camera

Like many before, am struggling with print to video of HDV material captured as HDV 1080i60 to a Sony HDR-HC1 camera. Just can't figure out what settings to use, only get the darn blue screen. Have tried several settings, but no success. Does anyone know the trick? Thanks!

Tim Kuhlman-
Have you tested the camera with non-HDV just to make sure the camera works?
Luck-
-DaddyPaycheck

How to print to video multiple sequences

I currently utilize FCP4 HD. How can I print to tape/video multiple sequences without nesting?
G4 Power Mac Desktop Mac OS X (10.3.9) FCP4 HD

David,
I respectfully disagree. I call 'nesting' the merging of all clips in a selected group into one quasi-clip (Sequence->Nest Items). Sort of like like merging layers in Photoshop with the difference being that in FCP you can still access individual clips or layers in a nest by double-clicking to open the nest in it's own Sequence.
You can apply a filter globally to a nest by dropping the filter on the nest - the filter will affect every clip within the nest. You can't do that with the copy & paste method.
The copy & paste method doesn't merge anything; all clips and layers remain as they did in the Sequence from which they were copied.
Calling that method 'nesting' would only serve to confuse people because they are two distinctly different actions and treated differently by FCP.
-DH

Trouble printing to video HDV

We've changed the MacOS for 6.3 version and the final for 7.0 version. It's an Imac. When now I shoot to tape (sony HVR 1500) an HDV108050i sequence the stream brakes. It seems the flow is not continuous.The image distort, go out, go in, TC jump. ( with DVpal sequence I've no problem). Has somebody any idea of what's it's happening. Before in the same machine we had no problem.
Thanks

It sounds like you don't have a working connection between FCE and your camera. Your cam is recording blank material to tape, that's why you're seeing timecode on the camera's LCD.
Make sure FCE and your camera 'see' each other via their firewire connection. You may need to do View > Video Out > Refresh Video Devices in FCE.
Make sure your camera is set to DV IN (not having this set is a common error), make sure it's in VTR mode and set to Record. You should be able to see your sequence play on the camera's LCD screen whether you are recording to camera or not. Also, you may need to manually begin recording on your camera before you click File > Print to Video > OK in FCE.

Printing To Video Nested Sequences

This is a basic question I'm sure, but I just need to know...
My first time nesting sequences. When I print to video, how do I make sure that only those nesting sequences get printed? In other words, on my timeline I have my 7 original sequences, and then a master sequence that contains all 7.
Am I correct that by opening that master sequence and then going about the print to video function, only that master sequence will print?

The master sequence will print with the nests that it contains. Make sure you render and mixdown each nest as well as the master sequence.

Timecode problems when Printing to tape HDV sequence

I have a project fully edited in HDV format and I want to make a master on tape to archive. I have done this before with no problems but now I have an odd issue. After FCP has printed to tape and I review the footage on the deck (camera is the recording device). The picture is on tape and looks fine but the timecode is not function properly. Instead of running continuously it freezes and then will skip forward some. Again the picture is there and looks fine. I have switched out the decks and the tapes and tried it 5 times but with the same results. What makes this more odd is the first hour of footage runs properly and then after that the problem starts.
I played back other projects like this that I did the same way and the timecode runs correctly. This is a very odd issue and hoping someone else has seen this before and can help. Thanks!

Try exporting the sequence as a self contained movie, then try recording that. My guts say the HDV you're working with is just not allowing your CPU to keep up with it all, and TC might be where this is showing up. But a single file playing back would make things easier on your system all round, and it's lossless. File/Export/QT movie... then check on make self contained, and leave off recompress all frames. This is lossless quality wise.
Sure it's not just dirty heads or something on your recording devices? LIkely not, but it's a shot in the dark from here.
Jerry

Can't resize video in Sequence monitor window anymore ???

OK Help... I have been working on a project in CS4 and the project settings are HD 1080. I have been able to bring in other SD clips and simply "click" on the video in the monitor window and a box comes up around the video and I can resize it and then render and it looks acceptable. This works if I want to shrink it and have a black border also. Now the ability to do this is GONE ! Same computer - same everything. I click and there is no box or ability to re-size. Only thing I ever did was load up another project at one time in standard DV - NTSC and encoded with Encore. Whats Wrong

Glad that you found it. You can also do the same thing with the Bounding Box, if you open the Effects Control Panel, and then click on the name Motion in the Effects list there, and you'll get a Bounding Box in the Program Panel. Personally, I like the numerical method, but some like the Bounding Box.
Good luck,
Hunt

Can Print to Video HDV sequence

Similar Messages

Maybe you are looking for