Can Project Lite be used with "Project Online with Project Pro for O365"

Hello MS Support,
I am aware that Project Lite does not functions as a stand alone, it either works with Project Online or Project Server. However, I wanted to check and be very sure before buying, if Project Lite will work equivalently well with "Project Online with
Project Pro for O365".
Project Lite:
https://products.office.com/en-IN/project/compare-microsoft-project-management-software
Project Online with Project Pro for Office 365:
https://products.office.com/en-us/project/project-online-with-project-pro-for-office-365
Prompt reply will be a great help.
Regards,
Urvashi

Urvashi:
Project Lite grants access to update timesheets and tasks only. You cannot use Project Pro to connect to Project Online with this license. Everyone who manages schedules using Project Professional or Project Pro for Office 365 must have a full license for
Project Online and a license for Project Pro. Project Lite is not a license that applies to on-premises installations. For that you acquire a different type of license.
Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs

Similar Messages

How can i pay on the apple store online with two credit cards, with two different billing addresses

I will be greatful if you could answer me this question...
How can i pay on the apple store online with two credit cards, with two different billing addresses?
I know that you can use two credit cards to pay an item but the problem is that i can only put the billing address of just one of the credit cards, and since the two cards are from different people (my parents) i can't do it. They live in the same place so i don't know if i should just put one of the billing address.
Thank you.
PS. I don't know if this is the right community to ask this, sorry if i'm wrong.

On the Apple Store "Payment & Pricing" page it states:
Using more than one payment card
You can also combine payment methods to pay for your purchase. Choose from the following combinations of credit cards and Apple Gift Cards:
Credit card(s) - up to two
Apple Gift Card(s) - up to eight
Apple Gift Card(s) + one credit card
During checkout, if you are paying with a gift card issued by a credit card company, you can combine it with one credit card.

Can airport express be used as a repeater with airport extreme?

Can Airport Express be used as a repeater with an Airport Extreme?

Hi, it can but i have lots of problems because my mac keeps switching between the express and the extreme. This causes that my connection goes every time down and i have to switch off my airport (in my mac) off and on again.
Do you know how or where i can stop this from happenig?

Hi there, i can't send letter using Mail on Mac with AOL mail.

Hey there, i can't send letter using Mail on Mac with AOL mail. But i can receive all letters.
Also using iCloud in Mail. What to do? Or maybe i can send letters only from iCloud/Me mail if i am using more than one mailbox in Mail?
Thanks

Troubleshooting sending and receiving email messages
Troubleshooting sending email messages

Is it possible to use creative cloud online with both Mac/windows system (on the same computer, bootcamp) without paying twice ?

Hello, I work with a Macbook pro, divided into mac and win 8 (with Bootcamp), is it possible to use Creative Cloud subscription with both system without paying twice.
Bonjour, J'utilise un Macbook pro partitionné Bootcamp mac et windows 8, est-il possible que l'abonnement à Creative Cloud en ligne fonctionne indifféremment dans les deux systemes (sur le même ordi), sans payer deux fois.
Merci,
jho

Your subscription allows for two functioning installations (normally on separate machines, but I imagine you could install the two as you indicate).

Project Pro for O365 supports Mac ?

Hi,
Does ProjectPro for O365 support (Apple) Mac for installation and can it be combined with MidSzeBuss (M) sku ?
Chetan

Hi Chetan,
Unfortunately it does not.
Please refer to the following similar post:
http://social.technet.microsoft.com/Forums/en-US/e4e9eeff-117d-4815-9e63-699bc4bd7780/availability-of-microsoft-project-professional-for-mac-users?forum=projectonline
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Can I use HDMI port on my Macbook Pro for digital audio INPUT?

Trying to find a way to get digital audio input to my new MBP with retina. HDMI supports audio and video, so can I use that port as an input?

It is not recommenced to use TimeMachine in a partition, either on the boot drive or externals because of problems in the past with that arrangement.
You also need hardware protection in addition to software protection.
If you want to do what I do, which is have a second 50% partition bootable clone of the first.
1: Use BootCamp software to create yourself a 50% sized partition, then exit the program. (you also can do it in Disk Utility, but it's tricky)
2: Head to Disk Utility and select the BOOTCAMP partition and change it's name and format to OS X Extended Journaled.
(To map off bad sectors in advance, use Disk Utility Erase with the next to last on the right selection, improves reliability and makes for faster reads)
3: Download Carbon Copy Cloner, now select your Macintosh HD partition and clone it to the second partition.
4: Whenever you want to boot from the second partition, just hold the option key down on the keyboard to select it to boot from.
You can access the folders on the second boot partition as well, to grab deleted files you accidentally erased (which is a rare thing for most to occur) however you should leave it alone and as a clone.
You can update the clone when you need to, or schedule it to run automatically.
You should also do this occasionally with a external drive, as the internal drive can die and take both partitions with it.
I currently do this with my laptop, that way if I'm mobile and have a serious issue, I can boot from the cloned partition in seconds without carrying a drive around. If I need large space for something I wasn't aware of, I can erase the clone partition and later clone it again.
Software does all the work, just pick a time your not using the machine and let it work. Painless really.
Most commonly used backup methods

How can I deploy EFS using Group Policy and automatically encrypt computers for ALL users who login?

How can I deploy EFS using Group Policy and Active Directory with a goal to automatically encrypt computers for ALL users who login? (NOT an option for me to use BitLocker)
I was asked to deploy EFS to encrypt the user my documents folder and profile on all of the users laptops. The laptops are in common areas (board meeting rooms, etc) and security of files is a must.
I successfully created a recovery certificate in AD. I created an OU and setup an EFS policy and users can now login and select to encrypt their own files. The issue is that management would like to have automaticy Encrypt ALL users my documents AUTOMATICALLY
when a user login.
Can this be done?
Please help

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Can't share photos using shared Photo Stream with iCloud Control Panel for Windows

BACKSTORY: My friend took pictures of my family. I want to see the pictures he took. We live about 2.5 hours apart by car. Gas prices are too high for me to just drive down with an external hard drive to get the pictures and I might as well throw my money out the window if I were to ship him a hard drive and he ship it back. SO. I ask him if he would share photos with me and he quickly agreed. He added me to a Photo Stream he has. ok cool. I recieve the invitation email just fine but this is the error I get when I click on the link:
ERROR MESSAGE:
Photo Stream
Follow these steps to join a shared photo stream
1.Make sure you have an iPhone, iPad or iPod touch running iOS 6 or a Mac running OS X 10.8.2 withiPhoto 9.4 or Aperture 3.4 or later installed.
2. Sign in to iCloud on your devices.
3. Open the invitation email on an updated device and tap the Join this Photo Stream button.
WHAT I NEED:
How can I view shared photo streams using iCloud Windows control panel 2.1.2.0? How can I work around this error message? I don't own any of these products that apple wants me to own in order to view these photos! I don't have the cash to go out and purchase them. What can I do to get "my" photos? Do I have to be signed into my friends apple id to see the shared photos?
What I've tried:
I already have the icloud control panel installed and updated to the latest version.
I'm signed into iCloud on the control panel. (no apple id password issues)
I have photo stream checked.
I have my photo stream checked
I have shared photo stream checked.
I have tried copying and pasting the link into the address bars of Safari for Windows, Google Chrome, Internet Explorer, and Firefox respectively and pressing enter to load. all present the same error message.
I visited iCloud.com to see if there was anywhere to access the shared photo stream there... No option exisits
Checked my photo stream folder in windows explorer. it's completely empty. I haven't put any of my own photos there so nothings missing per se... I just can't see my friends shared photos.
MY SET UP:
Windows 7 64bit Home Premium
4gb of RAM
iCloud control panel version 2.1.2.0
I don't own any version of Outlook, (if that matters. I doubt that it matters at all in this case.)
I don't have any iOS Devices or a mac capable of 10.8. My MacBook is stuck at 10.6.8. It's a late mid 2008 just before the aluminum unibody computers came out. If I had only waited another month... sigh. Murphy's Law is alive and well.
any sugestions, especially correct answers, are welcome. please help me figure this out. Thanks in advance.
Desert_dweller5

Hello desert_dweller5,
It sounds like you art trying to access a Shared Photo Stream, but you do not have one of the devices to enable your Apple ID as an iCloud account. The following article provides information on how Shared Photo Streams work:
iCloud: Photo Stream FAQ
http://support.apple.com/kb/HT4486
The article states that for privately Shared Photo Streams to work, the recipient will not only have to have an Apple ID, but it will have to be an iCloud account:
Friends and family with iCloud accounts can view your photos in the Photos app on any device using iOS 6 or later; on a Mac in iPhoto 9.4 or Aperture 3.4 or later; on a Windows PC with Windows Vista or later and iCloud Control Panel 2.0 or later installed; or on a second generation or later Apple TV with software version 5.1 or later installed. They can also view your photos on the web if you enable Public Website in the settings or options for your Shared Photo Stream.
Since you do not have an iCloud account and just and Apple ID, your friend can share the photo stream as a public website so that you can view it, as stated in the same article:
Can I share with people who don't have an iCloud account?
Yes. If you enable Public Website in the settings or options for your shared photo stream your photos will be published to a website that anyone can view in an up-to-date web browser.
To be able to change an Apple ID to an iCloud account, you would need an iPhone, iPad, or iPod touch with iOS 5 or later or a Mac with OS X Lion v10.7.4 or later as stated in the following article:
Creating an iCloud account: Frequently Asked Questions
http://support.apple.com/kb/HT4436
Best,
Sheila M.

Can we create LOV using free hand sql with out hardcoding

Hi gurus,
Dear All,
For some of the reporst we don't have universe, so we use to get the report with the help of free hand sql,
but here I have to hardcode the list of values by using @prompt, but instead of hardcoding is there any ways to get the list of vaues by using @prompt, if then can any one help me out.

Yes and no.
When we use a LOV in a universe, the SQL is generated from the object definition. With Free Hand SQL (FHS) there is no universe. However...
If you create a very simple universe to host your LOV, and then reuse the same prompt text in your FHS then you can fake the LOV. This is not a great solution, but to be honest, FHS is never really a solution that I would consider. You might consider using Crystal to replace Deski in these cases.

Can the Groupware connector use XI to communicate with CRM2007 ?

Hi,
     Can the latest CRM groupware connector be used to connect to SAP CRM2007 using XI
     instead of communicating directly with SAP CRM2007?
     The current system landscape regarding the exchange server and CRM systems is such that
     it would not be feasible to connect the connector directly to the CRM server.
    Any help would be highly appreciated.
Kind Regards,
Sunil

Sunil,
Well technically if you make XI talk the same language that CRM talks to the groupware connector then your scenario is possible. Now the problem would be knowing the "format" of the communication that comes out of CRM to the groupware connector. If you can figure that out, then you could probably custom build the scenario you are talking about.
I'm just not sure if you will get any type of positive ROI by doing this method. Personally it just looks like something that would be costly and probably something that you will not get a lot of support. It might be easier to keep "one" CRM system that talks to groupware. Then that CRM distributes the data back from the groupware outbound to XI and then in XI you can send back to CRM. You could do the reverse where your CRM system feeds it to XI and it sends it to the CRM groupware connector system, which then feeds the groupware.
It involves a few more hops, but elminates the needs to figure out the SOAP protocol building between XI and the connector. You can then "hop" on the standard middleware adapter to distribute changes outbound using XIF plus XI and evenutally wind up in the groupware.
The drawback is one of your CRM systems, needs to have at least a global view of all business partners and activities. Which might not be desired by your business.
Take care,
Stephen

Can I continue to use my MP3 player with M

I have just crossed over to Mac (OS 0.4.) from Windows and would like to keep on using my MP3 player (Creative MuVo200). I am able to sync up with CDs that are already in the music folder but am unable to rip and play whole CDs with either Flip4Mac or even Real Player. The players only seem to be able to play one song at a time rather that open a whole CD. Am I locked into i-tunes?

I have no problem syncing my MP3 player, the problem is with the actual software. I have Windows Media Player, Flip4Mac and Real Player but neither of them read the CD. The only I can do it is by opening a file under the file menu. That doesn't allow me to play the CD though, just play a chosen song within the CD. There also seems to be no way to rip a CD either. I absulutely don't want to use AAC files as they are not compatible with ProTools otherwise I would just stick to i-Tunes. I've also tryed XNJB but have the same problem with that.

Can I Face time using an iPad 2 with only wi-fi? Buying as a gift. Thanks

Can I use Face time using an iPad2 with only Wi-fi? Buying as a gift. Thanks

keridvm wrote:
Can I use Face time using an iPad2 with only Wi-fi?
Yes
keridvm wrote:
... Buying as a gift.
This is unclear.

Can/how do i use a 2nd ipod with same itunes account? please help

I dont use itunes/ipod. My husband is in Afghanistan and he would like me to buy him a 2nd ipod perhaps a nano so i can download his music and send that 2nd one to him.
I dont know much of this but when i connect the new ipod nano to his itunes, wont it erase all his itunes? i somehow remember something about the itunes synchs to what is on the ipod (which would be nothing on this new one).
any direction will help as i only have a small window to do/send this to him within the next days.

There are a bunch of ways to pick what you want to sync to his nano. When you plug in the nano, if you make sure the device on the left panel in iTunes, on the main panel you'll see a bunch of tabs in which you can select what is synced. Click on the "Music" tab and you'll see that you can pick playlists, artists, or genres.
The first option, playlists, is a very common technique. You create a playlist in iTunes ("File" - "New playlist") and then drag-and-drop music that you want to put on the nano into that playlist (and make sure you select this new playlist in that "Music" tab described in the previous paragraph).

Can we test and use ES from workplace with release state : "Restricted"

Hi folks,
I need a ES for my Composite Application, I have previously tested few ES from ES workplace.
But I need to access another ES (for canceling a SO) :-
http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE04284687BEBDF19515001A64D3F462&id=BCF1F938AC4F11DB2B24000F20DAC9EF
But the release state of this ES is : Restricted.
Please let me know the authorizations I have on this ES, if I can access/test it from ESWorkPlace.
Currently I get the message stating that the ES is not released.
Cheers
--- Brian

961469 wrote:
rjamya wrote:
I am suspecting this is a tkprof issue, analyzing the same trace file via orasrp doesnt show this behavior. Also the high physical reads shown are missing in the raw trace file.Im not so sure, I can see it in the raw trace file.
do you see it in raw trace file? if so can you post the STAT line showing high disk read (pr=nnnnnnnn) values ? I dont see it in the trace file that i generated.
Raj

Can Project Lite be used with "Project Online with Project Pro for O365"

Similar Messages

Maybe you are looking for