Can Project Std 2013 be made to run on Windows Server 2003?

Bought Project Standard 2013 and planned to install/run it on Windows Server 2003 (only one concurrent user), but the moment I try to install it, it gives the error "The procedure entry point EventWrite could not be located in the dynamic link library
ADVAPI32.dll." Then I noticed on the requirements page for Project Standard 2013 that Server 2003 is not supported (only 7/8/2008/2012 are supported). Is there a way to get it installed and running on Server 2003?

Hi Teky,
Please refer to the requirements below:
http://technet.microsoft.com/en-us/library/ee683978.aspx
At least Windows Server 2008 R2 SP1 is required for PS2013.
Note that if you just need Project 2013 standard edition (and not server), you do not need to install any Windows Server.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Similar Messages

  • Will RH7/RSC run on Windows server 2003?

    We have the technical communication suite (1) with RH7.  We're looking at installing and using the bundled RoboSource Control.  I found the system requirements for RH, but there's no mention of 2003.  Does anyone know if it will run on Windows Server 2003?

    Yes, it is amazing, isn't it? If only I could remember half of the interesting or useful tidbits I come across. But no, instead my head is full of old phone numbers, TV jingles, and grade-school song lyrics!
    You're right, RSC can be installed on a PC. However, if you have the option of installing it on a server, I would think that would be the better option. You'll avoid having unnecessary load on your PC. Also, depending on the server configuration, you can get better response using the server, as RSC is very disk-intensive. Besides all that, it's nice to have IT take care of backups and such.
    G

  • I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

    I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

    I may be way out, but do you know about this product, would it help integrate the Macs for you.
    https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

  • Why the RSC can not found my JRE1.6.0.06 on windows server 2003 ?

    I installed the SUN RSC program on my windows server 2003, It required JRE 1,3 or later,then I installed the JRE.16.0.06, I set the JAVA_HOME and CLASSPATH,I can got correct information with java -version commend on cmd,but the RSC still told me that it required JRE 1.3 or later.
    Why ?

    We run our Sun V480s and E250 (Solaris 10) headless, and depend on RSC (both CLI and GUI) to access the consoles from Windows.XP desktop machines.
    We have been using the RSC GUI from the Wintel boxes quite successfully for several years, and appreciate having the RSC devices in our Sun servers. We rely on Sun's RSC software.
    Several days ago we installed the current Sun JRE (1.6.0.06) on the Windows machines. RSC GUI now fails to run on the Windows machines, displaying a message box advising that Java 1.3, or later, is required and directing us to download 1.3 or later.
    Since 1.6 is later than 1.3, it would appear that Sun's current JRE broke the existing Sun RSC GUI app.
    How could Sun do this? WIll they release a fix?
    We will try to open a Service Request, but are having difficulty due to Sun's problems implementing the new Support Contract arrangements, and it is not clear that we can access our support at this time. Sun has physically visited our facility, and given us absolute assurance that they will continue our existing contract for the duration of their difficulties, while simultaneously lapsing our contract when we attempt to access it online. Consequently, we cannot immediately get contractual assistance on this matter, through the normal support channel.
    Thank you.
    DG
    Edited by: david_grove on Jun 4, 2008 5:53 PM

  • [CS4 Server Win]: Plugin does not run on Windows Server 2003?

    Hi,
    can anybody help?
    My plugin is running on Windows XP and Windows Vista.
    On both operation systems the scripting methods are visible in ExtendScript Toolkit and can be called by javascript.
    On Windows Server 2003 my plugin is not running, the scripting methods are not visible in ExtendScript Toolkit!
    What is missing?
    Thanks,
    Alois Blaimer

    > I am using Visual Studio 2008 with the VC++ 9.0 compiler.
    > Could this be a problem?
    Yes.
    CS4: use VC2005 + SP1
    CS3: use VC2005 without SP1
    CS2: use VC2003
    In my previous post I described one of the problems I found out the hard way - walking around in disassembler is a pain, even more Intel and Windows, comparing to Mac, and PowerPC. Since then I only use the official tools even if others tell it worked for them, and I keep the InDesign installations for final build and test on the earliest supported operating system.
    Dirk

  • Safari does not run at Windows Server 2003

    Any page I try to open at Safari, it just crashes (I mean, just closes) without any technical information.
    The most intersting fact is that when I go to preferences, just in the appearance tab make Safari close.
    And the most important fact is that I use Microsoft Windows Server 2003 R2 en-us. I NEVER was able to use Safari in any 2003 (since first Safari beta). I've tryed Safari in several of my 2003 machines (at least 4 very different ones). I got better in new versions (first Safari ones didn't even openup)
    I'v tryed so many things. Rename several folders, like safari.resources, run Microsoft Application Verifier to fool it as Windows XP, startup some services (like themes or Bonjour -- wich I use to disable), no solution at all. My sixt sense tells me that is is anything to do with some graphics rendering conflict, since it closes in the appearance and Safari have a different look from a regular Windows app window.
    Bottom line: any help ?

    The kinda answer I like: download, copy, mesh, hack. Looks very nice, must work in most cases, but not this time for me. Behavior was exactly the same, running the nightly build.
    Just for the records:
    Safari prefs in my Windows live happy in:
    C:\Documents and Settings\Administrator\Application Data\Apple Computer\Safari
    C:\Documents and Settings\Administrator\Local Settings\Application Data\Apple Computer\Safari
    These days I installed an Safari in a brand new 2003 and worked nice. Bug 4 x 1 Safari. Bug still winning.
    So, it must be some stuff, some little tricky service or software I install in my usual Windows.
    Anyway, thank you very much...
    If someone have some clue, I'll apreciate

  • Can't access some clien'ts features after migration Windows Server 2003 - 2008R2

    Hi,
    I have done migration of the domain controller from Windows Server 2003 to 2008R2. The old domain controller is set as a relay. After that, I have problems with the clients.
    Now with the 2008R2, it is impossible to:
    -Explore targeted computer's disks.
    -All RPC features.
    -The deployment by GPO is also impossible (Group Policy object did not apply because it failed with error code '0x80070015 The device is not ready).
    All of these features works well on the relay. I also can't shutdown a computer from a pc logged as Administrator.
    I've got the problem on the 3 sites I've migrate.
    Thanks.

    > The old domain controller is set as a relay.
    Please explain "relay" further. I never heard this label in terms of
    Domain Controllers...
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Forms cannot run at Windows Server 2003

    Windows Server 2003
    Forms 10.1.02
    Database 10g 10.2.0.1 Production
    every time i run the forms application but the firefox show it is crash...
    also my Windows Server 2003 cannot run any java application...
    need some advice from experts here
    THANKS
    dausnasir

    The kinda answer I like: download, copy, mesh, hack. Looks very nice, must work in most cases, but not this time for me. Behavior was exactly the same, running the nightly build.
    Just for the records:
    Safari prefs in my Windows live happy in:
    C:\Documents and Settings\Administrator\Application Data\Apple Computer\Safari
    C:\Documents and Settings\Administrator\Local Settings\Application Data\Apple Computer\Safari
    These days I installed an Safari in a brand new 2003 and worked nice. Bug 4 x 1 Safari. Bug still winning.
    So, it must be some stuff, some little tricky service or software I install in my usual Windows.
    Anyway, thank you very much...
    If someone have some clue, I'll apreciate

  • Running 10G as a non local system account on Windows Server 2003

    Hi,
    I have an Oracle 10G database running on Windows Server 2003, SP2. I have created the database and it all works fine while the service is running as the default local system account. However, when I change the user that the service runs as to a different account the database starts and opens, and I can log on as SYS using a bequeath connection but I am unable to log on as any other user going through the listener. The listener responds to TNSpings, and all seems to be OK. When I switch it back to the local system user again it all works fine.
    Can anyone offer any advice or help?
    Thanks,
    Rob

    That's probably because the listener is still running as the local system account. Have you tried to change the listener service to run as the same account as the Oracle service?

  • One of the DC can't connect to AD for Windows server 2003

    Dear Sir,
    We have 2 Domain Controllers in our Domain, DC1 and DC3, which is running on Windows Server 2003 SP2, I found the DC3 failed to connect to AD, and I found the following error message logged in the system event many time
    Source: MRxSmb
    Type : Error
    主瀏覽器從電腦 DC1 收到 認為它是傳輸 NetBT_Tcpip_{C1D9AA59-2423-4059-A773 網域主瀏覽器的伺服器宣告。 主瀏覽器已中止或已強制選擇。
    Source: KDC
    Type: warning
    找不到事件識別碼 20 (在來源 KDC 中) 的描述。本機電腦可能沒有所需的登錄資訊或訊息 DLL 檔案，因此無法顯示發自遠端電腦的訊息。您可以使用 /AUXSOURCE= flag 來重新抓取這個描述。請參閱 [說明及支援] 來了解詳細資料。以下資訊為事件的一部份: 事件日誌檔已損毀。
    Source: Kerberos
    Type: Error
    The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.  This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically
    named  machine accounts in the target realm (Domain name), and the client realm.   Please contact your system administrator.
    I have searched on internet, and tried some of the suggestions but still can't fixed the issue, I also can't depromo the DC3, and can't use remote desktop connection connect to DC3
    What can I do now, can I just reinstall the DC3 and process the dcpromo again?

    Hi Calin,
    Here is the log content for your reference:-
    Domain Controller Diagnosis
    Performing initial setup:
       * Verifying that the local machine DC3, is a DC.
       * Connecting to directory service on server DC3.
       * Collecting site info.
       * Identifying all servers.
       * Identifying all NC cross-refs.
       * Found 2 DC(s). Testing 1 of them.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\DC3
          Starting test: Connectivity
             * Active Directory LDAP Services Check
             * Active Directory RPC Services Check
             ......................... DC3 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\DC3
          Starting test: Replications
             * Replications Check
             [Replications Check,DC3] Inbound replication is disabled.
             To correct, run "repadmin /options DC3 -DISABLE_INBOUND_REPL"
             [Replications Check,DC3] Outbound replication is disabled.
             To correct, run "repadmin /options DC3 -DISABLE_OUTBOUND_REPL"
             ......................... DC3 failed test Replications
          Test omitted by user request: Topology
          Test omitted by user request: CutoffServers
          Starting test: NCSecDesc
             * Security Permissions check for all NC's on DC DC3.
             * Security Permissions Check for
               DC=ForestDnsZones,DC=domain,DC=COM,DC=HK
                (NDNC,Version 2)
             * Security Permissions Check for
               DC=DomainDnsZones,DC=domain,DC=COM,DC=HK
                (NDNC,Version 2)
             * Security Permissions Check for
               CN=Schema,CN=Configuration,DC=domain,DC=COM,DC=HK
                (Schema,Version 2)
             * Security Permissions Check for
               CN=Configuration,DC=domain,DC=COM,DC=HK
                (Configuration,Version 2)
             * Security Permissions Check for
               DC=domain,DC=COM,DC=HK
                (Domain,Version 2)
             ......................... DC3 passed test NCSecDesc
          Starting test: NetLogons
             * Network Logons Privileges Check
             Verified share
    \\DC3\netlogon
             Verified share
    \\DC3\sysvol
             ......................... DC3 passed test NetLogons
          Starting test: Advertising
             Warning: DsGetDcName returned information for
    \\dc1.domain.COM.HK, when we were trying to reach DC3.
             Server is not responding or is not considered suitable.
             The DC DC3 is advertising itself as a DC and having a DS.
             The DC DC3 is advertising as an LDAP server
             The DC DC3 is advertising as having a writeable directory
             The DC DC3 is advertising as a Key Distribution Center
             The DC DC3 is advertising as a time server
             [DC1] LDAP bind failed with error 8341,
             Win32 Error 8341.
             Server DC3 is advertising as a global catalog, but
             it could not be verified that the server thought it was a GC.
             ......................... DC3 failed test Advertising
          Starting test: KnowsOfRoleHolders
             Role Schema Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
             [DC1] DsBindWithSpnEx() failed with error -2146893022,
             Win32 Error -2146893022.
             Warning: DC1 is the Schema Owner, but is not responding to DS RPC Bind.
             Warning: DC1 is the Schema Owner, but is not responding to LDAP Bind.
             Role Domain Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
             Warning: DC1 is the Domain Owner, but is not responding to DS RPC Bind.
             Warning: DC1 is the Domain Owner, but is not responding to LDAP Bind.
             Role PDC Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
             Warning: DC1 is the PDC Owner, but is not responding to DS RPC Bind.
             Warning: DC1 is the PDC Owner, but is not responding to LDAP Bind.
             Role Rid Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
             Warning: DC1 is the Rid Owner, but is not responding to DS RPC Bind.
             Warning: DC1 is the Rid Owner, but is not responding to LDAP Bind.
             Role Infrastructure Update Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
             Warning: DC1 is the Infrastructure Update Owner, but is not responding to DS RPC Bind.
             Warning: DC1 is the Infrastructure Update Owner, but is not responding to LDAP Bind.
             ......................... DC3 failed test KnowsOfRoleHolders
          Starting test: RidManager
             * Available RID Pool for the Domain is 9126 to 1073741823
             * dc1.domain.COM.HK is the RID Master
             ......................... DC3 failed test RidManager
          Starting test: MachineAccount
             Checking machine account for DC DC3 on DC DC3.
             * SPN found :LDAP/DC3.domain.COM.HK/domain.COM.HK
             * SPN found :LDAP/DC3.domain.COM.HK
             * SPN found :LDAP/DC3
             * SPN found :LDAP/DC3.domain.COM.HK/domainHK
             * SPN found :LDAP/34106c30-327d-4d63-ae93-fec48cac2975._msdcs.domain.COM.HK
             * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/34106c30-327d-4d63-ae93-fec48cac2975/domain.COM.HK
             * SPN found :HOST/DC3.domain.COM.HK/domain.COM.HK
             * SPN found :HOST/DC3.domain.COM.HK
             * SPN found :HOST/DC3
             * SPN found :HOST/DC3.domain.COM.HK/domainHK
             * SPN found :GC/DC3.domain.COM.HK/domain.COM.HK
             ......................... DC3 passed test MachineAccount
          Starting test: Services
             * Checking Service: Dnscache
             * Checking Service: NtFrs
             * Checking Service: IsmServ
             * Checking Service: kdc
             * Checking Service: SamSs
             * Checking Service: LanmanServer
             * Checking Service: LanmanWorkstation
             * Checking Service: RpcSs
             * Checking Service: w32time
             * Checking Service: NETLOGON
                NETLOGON Service is paused on [DC3]
             ......................... DC3 failed test Services
          Test omitted by user request: OutboundSecureChannels
          Starting test: ObjectsReplicated
             DC3 is in domain DC=domain,DC=COM,DC=HK
             Checking for CN=DC3,OU=Domain Controllers,DC=domain,DC=COM,DC=HK in domain DC=domain,DC=COM,DC=HK on 1 servers
                Object is up-to-date on all servers.
             Checking for CN=NTDS Settings,CN=DC3,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK in domain CN=Configuration,DC=domain,DC=COM,DC=HK on 1 servers
                Object is up-to-date on all servers.
             ......................... DC3 passed test ObjectsReplicated
          Starting test: frssysvol
             * The File Replication Service SYSVOL ready test
             File Replication Service's SYSVOL is ready
             ......................... DC3 passed test frssysvol
          Starting test: frsevent
             * The File Replication Service Event log test
             There are warning or error events within the last 24 hours after the          SYSVOL has been shared.  Failing SYSVOL replication problems may cause         
    Group Policy problems.
             An Warning Event occured.  EventID: 0x800034C4
                Time Generated: 11/04/2014   15:59:23
                (Event String could not be retrieved)
             ......................... DC3 failed test frsevent
          Starting test: kccevent
             * The KCC Event log test
             Found no KCC errors in Directory Service Event log in the last 15 minutes.
             ......................... DC3 passed test kccevent
          Starting test: systemlog
             * The System Event log test
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 11/05/2014   11:11:27
                Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk.  The target name used was
    ldap/dc1.domain.COM.HK/[email protected]. This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this
    is due to identically named  machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system administrator.
             An Error Event occured.  EventID: 0x00000423
                Time Generated: 11/05/2014   11:11:27
                Event String: The DHCP service failed to see a directory server for authorization.
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 11/05/2014   11:29:56
                Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk.  The target name used was
    LDAP/dc1.domain.COM.HK/[email protected]. This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this
    is due to identically named  machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system administrator.
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 11/05/2014   11:29:56
                Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk.  The target name used was domainHK\DC1$. This indicates that the password
    used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system administrator.
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 11/05/2014   11:43:20
                Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk.  The target name used was cifs/dc1.domain.COM.HK. This indicates that the
    password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named  machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system
    administrator.
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 11/05/2014   11:50:39
                Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk.  The target name used was ldap/dc1.domain.COM.HK. This indicates that the
    password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named  machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system
    administrator.
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 11/05/2014   11:50:41
                Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk.  The target name used was ldap/ba3f48bc-fa6a-4698-9947-ba8435cbf92b._msdcs.domain.COM.HK. 
    This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named  machine accounts in the target realm (domain.COM.HK), and the client realm.  
    Please contact your system administrator.
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 11/05/2014   11:50:41
                Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk.  The target name used was LDAP/ba3f48bc-fa6a-4698-9947-ba8435cbf92b._msdcs.domain.COM.HK. 
    This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named  machine accounts in the target realm (domain.COM.HK), and the client realm.  
    Please contact your system administrator.
             ......................... DC3 failed test systemlog
          Test omitted by user request: VerifyReplicas
          Starting test: VerifyReferences
             The system object reference (serverReference)          CN=DC3,OU=Domain Controllers,DC=domain,DC=COM,DC=HK and backlink on         
    CN=DC3,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK          are correct.
             The system object reference (frsComputerReferenceBL)          CN=DC3,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=domain,DC=COM,DC=HK         
    and backlink on CN=DC3,OU=Domain Controllers,DC=domain,DC=COM,DC=HK are          correct.
             The system object reference (serverReferenceBL)          CN=DC3,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=domain,DC=COM,DC=HK         
    and backlink on          CN=NTDS Settings,CN=DC3,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK          are correct.
             ......................... DC3 passed test VerifyReferences
          Test omitted by user request: VerifyEnterpriseReferences
          Test omitted by user request: CheckSecurityError
       Running partition tests on : ForestDnsZones
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
       Running partition tests on : DomainDnsZones
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
       Running partition tests on : Schema
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
       Running partition tests on : Configuration
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
       Running partition tests on : domain
          Starting test: CrossRefValidation
             ......................... domain passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... domain passed test CheckSDRefDom
       Running enterprise tests on : domain.COM.HK
          Starting test: Intersite
             Skipping site Default-First-Site-Name, this site is outside the scope          provided by the command line arguments provided.
             ......................... domain.COM.HK passed test Intersite
          Starting test: FsmoCheck
             Warning: Couldn't verify this server as a GC in this servers AD.
             GC Name:
    \\dc1.domain.COM.HK
             Locator Flags: 0xe00003fd
             PDC Name:
    \\dc1.domain.COM.HK
             Locator Flags: 0xe00003fd
             Time Server Name:
    \\dc1.domain.COM.HK
             Locator Flags: 0xe00003fd
             Preferred Time Server Name:
    \\dc1.domain.COM.HK
             Locator Flags: 0xe00003fd
             KDC Name:
    \\dc1.domain.COM.HK
             Locator Flags: 0xe00003fd
             ......................... domain.COM.HK passed test FsmoCheck
          Test omitted by user request: DNS
          Test omitted by user request: DNS

  • We're running Windows server 2003 32bit and want to migrate to Windows server 2012R2 64bit, can someone provide a step by step procedure on how to migrate instances on ADAM to AD LDS?

    I have no experience in dealing with servers, but my senior has asked me to investigate on how to migrate instances on ADAM (windows server 2003 32bit) to AD LDS (Windows server 2012R2 64 bit) as in place upgrade is not an option as we're running a 32bit
    Server and want to migrate to a 64bit Server. can someone please give me a Walkthrough on how to do this.
    Thanks in advance.

    Hi,
    it'd be of great help if you could give me a step by step process of replication.
    There is no step-by-step article/guide of replication process, replication between AD LDS instances of the same configuration set is an automatic process.
    All we need to make sure is to create a replica of the existing instance, and there is no network/security obstacle preventing the replication.
    Please note that we need to install AD LDS from Server manager on Windows Server 2012 and 2012 R2.
    More information for you:
    Understanding AD LDS Replication and Configuration Sets
    http://technet.microsoft.com/en-us/library/cc770465.aspx
    Best Regards,
    Amy

  • Marketing Workflow (running on Windows Server) can not read files on Linux

    We are currently facing an issue in fetching the WSD responses stored in XML format and importing it into Siebel DB. These XML files are created in Siebel Linux servers(Temp folder) where EAI Object manager is running. But Marketing workflows (Mktg Master import workflow) is running on Windows server ( where marketing file system installed). Mktg Master import workflows are not able to read XMLs stored in Linux servers.
    When we monitor the workflow we see an error:
    “Error invoking service 'Mktg File Manager', method 'ProcessFile' at step 'File Processing'.(SBL-BPR-00162) --Error getting XML from file '/siebel/gtwysrvr/fs/temp/1-158U3XB121038.xml'.” (SBL-EAI-04261)
    How do I overcome this? What is best practice?

    Moderator Action:
    Same post is multi-posted to the Siebel sub-forum:
    Error in fetching WSD responses stored in XML format and importing it
    This off-topic post is now locked and likely will be removed.

  • Crystal Reports 2008 runtime error while running on Windows Server X64

    I have a .NET web application compiled as X86 in Visual Studio 2008 invoking Crystal Reports 2008 SP2 that's running fine at a number of sites running Windows Server 2003 X86.</br>
    </br>
    When deploying this app to Windows Server 2008 X64 I get the error message below. </br>
    </br>
    I'm aware that there is an unanswered question similar to this already in the forum but my application is compiled for X86 and I've tryed installing a variety of run times including "crruntime_12_2_mlb.msi" and "crredist2008_x86.msi".</br>
    </br>
    What combination of compile and run time is needed to get around this issue?</br>
    </br>
    Thanks.</br>
    </br>
    </br>
    ERROR MESSAGE **.</br>
    </br>
    An error has occurred while attempting to load the Crystal Reports run time..</br>
    </br>
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly..</br>
    </br>
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium)  that is required.  Please go to http://www.businessobjects.com/support for more information.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. .</br>
    </br>
    Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime..</br>
    </br>
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly..</br>
    </br>
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium)  that is required.  Please go to http://www.businessobjects.com/support for more information..</br>
    </br>
    Source Error: .</br>
    </br>
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.  .</br>
    </br>
    Stack Trace: .</br>
    </br>
    [LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime..</br>
    </br>
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly..</br>
    </br>
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium)  that is required.  Please go to http://www.businessobjects.com/support for more information.]
       CrystalDecisions.CrystalReports.Engine.ReportDocument.CheckForCrystalReportsRuntime() +399.</br>
       CrystalDecisions.CrystalReports.Engine.ReportDocument..cctor() +218.</br>
    </br>
    [TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.].</br>
       CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor() +0.</br>
       ChartsEnterprise.UI.GenReport.CreateReport(String reportname) +42.</br>
       System.EventHandler.Invoke(Object sender, EventArgs e) +0.</br>
       System.Web.UI.Control.OnLoad(EventArgs e) +132.</br>
       System.Web.UI.Control.LoadRecursive() +66.</br>
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean .</br>includeStagesAfterAsyncPoint) +2428.</br>
    Edited by: PSernz on Mar 25, 2010 3:58 AM

    What combination of compile and run time is needed to get around this issue?
    See [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki. I think I may not have that wiki updated up to FP2.5, so the FP2.5 msm is here:
    https://smpdl.sap-ag.de/~sapidp/012002523100002975182010E/cr2008fp25_mm.zip
    msi is here:
    https://smpdl.sap-ag.de/~sapidp/012002523100002975312010E/cr2008fp25_redist.zip
    Check the version of the CR assemblies referenced in your project. The use the wiki above to deploy the correct runtime.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Can't get past OCX error when installing ODAC 11g on Windows Server 2003

    I have been trying to install ODAC 11g on Windows Server 2003 and can't get past the OCX error when registering oravsdbgeng11w.dll. I've read every message on this forum even remotely related to this problem and tried every solution offered. I have done a clean install into a new Oracle home, and made sure Instant Client is always included. All service packs and automatic updates have been installed. For what it's worth I have successfully installed ODAC 11g on Windows XP Pro.
    If anyone out there has been able to get this up and running and would care to share the wisdom that would be greatly appreciated.
    Thanks!
    Michael Young
    Latitude Geographics
    Victoria, BC

    Michael, as you already noticed, every time I have seen this issue it has been because ODT was being installed into an Oracle home where no client exists, or perhaps installed into an old oracle home where the client was an old version (eg Oracle10), or the client was broken. Usually though, the user unchecked the instant client checkbox during the ODAC install.
    So you say you checked instant client and you still got the error? That doesn't add up...
    Are you using 32-bit windows? If you are using 64 bit windows be sure to tell us.
    Why don't you try avoiding using instant client at all, in case it is somehow not getting installed properly.
    You can do this as follows:
    1) Under the download links on OTN, go to the database download page.
    2) Download the Oracle Database client 11g for Microsoft Windows
    3) Run this installer and Install ODP.NET 1.x and 2.x into a new Oracle home from this client install, but nothing else. If ODP.NET is not listed there (it has been a long time since I looked at that) than just install a minimal Oracle client install.
    4) Close the installer
    5) Go back and install ODAC and this time choose "Oracle Server" radio button during the install (rather than the client install)
    6) Install ODT and ODP.NET at least and be sure they are being installed into the Oracle home created in the first steps above.
    This will avoid use of Instant Client and will hopefully avoid the OCX error. Let me know if this solves your problem.
    Christian

  • How to display MICR font in XMLP where APPS is running on WINDOWS Server?

    Hi,
    I'm working on check printing reports with XMLP. In the output I need to print the check number in the last line of the page in MICR fonts. To do this I have followed the below steps...
    1. Installed the font (MICRe13b5.ttf) in local machine.
    2. Also placed this font in "\apps\ued02\applmgr\common\util\java\1.4\j2sdk1.4.2_04\lib\fonts" folder on the WINDOWS 2003 SERVER.
    3. We placed "xdo.cfg" in "\apps\ued02\applmgr\common\util\java\1.4\j2sdk1.4.2_04\lib\fonts" and "\apps\ued02\applmgr\common\util\java\1.4\j2sdk1.4.2_04\lib" folders.
    We made an entry for the MICR font in the xdo.cfg file.
    When we run the report it's showing the MICR Line in NORMAL FONT (ARIAL).
    Can someone help me how to display the MICR fonts where Oracle Apps running on WINDOWS server?

    The xdo.cfg contains below info.
    <config version="1.0.0" xmlns="http://xmlns.oracle.com/oxp/config/">
    <!-- Font setting -->
    <fonts>
    <font family="MICRe13b" style="normal" weight="normal">
    <truetype path="\apps\ued02\applmgr\common\util\java\1.4\j2sdk1.4.2_04\jre\lib\fonts\MICRe13b5.ttf"/>
    </font>
    </fonts>
    </config>

Maybe you are looking for