Can psc2510 work connected and wireless at the same time?

My PSC2510 all-in-one is connected to my desktop the old-fashioned way.  Can I get my laptop to print wirelessly from the same printer?

I'm pretty sure that USB and wireless connections can work at the same time on this printer. Just make sure the same PC is not connected by both USB and wireless. The software will get "confused" as to which way to communicate with the printer.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Similar Messages

  • Can I use the HP 4630 with both the USB Connection and Wireless at the same time?

    Setup the HP 4630 and the wireless connection from the laptop works fine, but the USB connection on the desktop won't print.
    The printer is recognized and says it is online. When I unplugged the USB the priner status went to off-line, plugged it back in and said it was ready. Tried to print the test page and nothing. Tried to print from Word and nothing. Rebooted and shut down the printer. After reboot gat the same issue. Any suggestions?

    Write to a local variable of the textbox.

  • Can I use HP Pro 8600 with usb and wireless at the same time

    Can I use HP Pro 8600 with usb and wireless at the same time?  Sometimes I cannot get the wireless to work, it seems to be my laptop.  It would be nice if I could use the usb, but it doesn't work.  What should / can I do, if anything?
    Sam

    Hi,
    Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can WRT54G use WPA and WEP at the same time?

    I used to have a smc 802.11b wireless router and a dlink 802.11b wireless print server.
    In order to have WPA and a firewall, I replaced the wireless router with a linksys WRT54G.
    Then I realize the dlink print server, even though it has the "g" keyword in the model name, does not do WPA (DP-G321).
    Do I have to buy a 802.11g wireless print server? Or is there another solution?
    I don't supposed the linksys router can do both WPA and WEP at the same time?
    Connecting the print server to the router with a cable is not feasible. They are on different floors.

    both of your devices are has a wireless b technology settings, just set a wep encryption on your network rather than wpa because some wireless b devices don;t work with wpa. with regards to your query if wep and wpa can be used at the same time, the answer is no.

  • Can't recording  Midi  and Audio at the same time

    I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
    Tracy

    Hi!
    Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

  • Airport extreme wired AND wireless at the same time?

    Very sorry for this newbie question. Can i have my iMac wired to my computer with ethernet and wireless at the same time?
    If so, what ports to i plug what into?
    My guess is modem-wan port on extreme and a cable going wired from the ethernet port on the extreme to the iMac?
    Do i need to do any configuring?
    Thanks!

    The operatibe word here is EXPRESS
    To the best of my knowledge the ethernet port on the express is for ethernet IN not out
    http://manuals.info.apple.com/en/AirPortExpressSetupGuide.pdf The pertinent diagrams are like page 20 - 25
    Now you can actually do what you are talking about with an extreme.. an extreme can, in theorey operate as an remote/relay taking incoming signal giving you one - four out bound ethernet ports
    that info can be found in the manual on setting up a WDS
    the only thing to remember is .. the weakest leg controls.. if your wireless signal to the relay is poor. any thing using the relay for access will also be poor
    I have found out the hard way about that
    hey you can get good price on bulk cat 5

  • Can we use exceptions and conditions at the same time?

    can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

    Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
    But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

  • Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

    Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
    Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • My SB Audigy 2 card can't use headset and musicamplifier at the same time

    Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
    The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
    In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
    I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
    But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
    Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
    please help, thx.
    Michael

    If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
    Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
    Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    Another option:
    Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
    --> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
    = You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
    .jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

  • Can i do this? (wired and wireless at the same time?)

    Hi all
    My first time on these boards, Iam hopefully setting up a wireless network at home very soon. At the moment I have a cable modem that is 'hard wired' directly into my G5 imac that has no wireless cards installed. simple (so far)
    Now... Iam getting a laptop very soon and wish to go wireless roaming the house etc so i will purchase an airport extreme at the same time.. is it possible to have my laptop on wireless and the G5 'hard wired' from the airport station providing 2 connections at the same time one wireless, one hard wired?
    If not, what kit do i need to make this happen? apart from a wireless card for the G5 which id rather not do as id like that connection 100% stable and as fast as the 10mb will go..
    Any help and advice would be appreciated.
    iMac G5   Mac OS X (10.4.7)  

    The default settings of the AEBS works with most cable modems without any configuration changes needed.
    The AEBS is a NAT router, meaning that it will be "seen" by your ISP as a single device. In turn, the AEBS will distribute private IP addresses, on the local network, to all of the computers connected to it (wired or wirelessly) because it has a built-in DHCP server. So in this case, each of your computers would be assigned an unique IP address.

  • How to use airport express wired and wireless at the same time

    Hi,
    I currently have FiOS with Verizon, they ran a coax cable to the Verizon router. I didn't ask them to switch to CAT6 cable since I have an airport extreme base station and an airport express base station (both are the newest generation). I ran a CAT6 cable from the Verizon FiOS router to my AEBS (extreme) to make it the default wireless router. The Verizon router and extreme are in one room. Now, the Airport express is in my living. I'd like to extend the wireless network from the extreme. However, I can't seem to find a way to use both wired and wireless from the airport express at the same time. It's now either via wired, or wiresless. So is there a way to get both work?

    Can you tell us if you used Apple's instructions for a "roaming" network?
    http://support.apple.com/kb/HT4260
    Although the instructions picture a 2nd AirPort Extreme in the illustrations, the setup instructions would be exactly the same for an AirPort Express.

  • Evdo and wireless at the same time?

    Hi,
    I cannot get my T500 to connect to the internet via internal mobile broadband card AND a local wireless network at the same time. When I connect to the wireless network (via Windows connection not thinkvantage) to use my printer or squeezebox, the internet connection disconnects.
    I am using Windows wireless connection to the wireless instead of Thinkvantage. Soapbox: thinkvantage is too domineering. I can't control my own computer because thinkvantage is like Hal and just takes it over. That being said, I just updated to the most recent version in hopes that this wireless/mobile broadband problem would be resolved. But no, the evdo still drops when I connect to use the wireless.  It's not immediate - I might get 3 or 4 minutes of dual connectivity  but it ultimately drops the evdo every time.
    I've picked the brains of the linksys folks. They gave it a really good effort. We went through all kinds of configuration gyrations but no luck. Here is that discussion if you want to review: http://forums.linksysbycisco.com/linksys/board/message?board.id=Wireless_Routers&thread.id=149718 .
    Can anyone over here help me? Many many thanks in advance!

    Thanks for your reply.
    I am using thinkvantage to connect to WWAN. Vzaccess is really clunky. I suspect that this is the problem so I would like to connect to the wireless via thinkvantage. I realize I'm probably asking for a lot: use TV for one connection and Windows for another...

  • Can InterConnect support D3L and XML at the same time?

    Hi,
    In file Adapter.ini, ota.type can only be one of D3L and XML. Does it mean InterConnector can only support either D3L or XML parsing at one time?
    If I have different type of incoming files, I need to install at least two interconnectors to work, right?
    Thanks,
    Jie

    ASM diskgroup redundancy and SAN redundancy are not the same and work completely different. You cannot use ASM extern and high redundancy at the same time.
    A SAN does not know anything about Oracle database files and redundancy is usually accomplished by RAID. ASM is not RAID and does not duplicate complete disks. ASM data redundancy is based on disk failure groups and file extents. ASM knows about Oracle database files and automatically adjusts the stripping of data, which a SAN cannot. ASM also has the advantage that the storage size can be dynamically adjusted while the storage is online, without having to rebuild your storage devices. Rebuilding or extending a RAID based SAN solution usually means to reinitialize the storage.
    Beware of SAN snapshot and replication features as they may not provide complete backup or redundancy if you loose the complete storage.

  • Can we use CS6 and CC at the same time on different machines?

    We have a Creative Cloud subscription and have software downloaded to an iMac and also to a PC. I understand that we can't use the applications on both machines at the same time, but could one of my colleagues use the CS6 versions at the same time on the PC?

    Hi Carol
    A subscription to Creative Cloud gives you access to the CC version and the CS6 version of the software.  From the original question, it seemed to me that they were asking if they can share the subscription between 2 colleagues if one used the CC version and the other used the CS6 version.  That is not permitted as the subscription is licensed to one user.
    If you have a Creative Cloud subscription and a perpetual license for CS6 then you can use them concurrently on 2 machines as they are separate licenses.
    Does this help clarify?
    Thanks
    Bev

  • Can't use Skype and PhotoBooth at the same time?

    I recently updated my Skype to the new version. I used to be able to have my camera on PhotoBooth and Skype working at the same time, however since I made the update I cannot. Depending on which programme I open first, the other will not work. If Skype is working, then the error message 'Camera offline' comes up. I have tried uninstalling and reinstalling Skype and that has not solved the issue. Does anyone have any ideas? Thanks.

    Never seeing this problem.
    Are you using a MobileMe IMAP account or another provider and account? Is problem when using the Apple Mail application in OS 10.4.11 on your listed G5?
    Ernie

Maybe you are looking for