Can publishers use earlier version than administrator

Hi there,
I'm the administrator of several sites and I currently use Contribute CS4.
One of my customers needed some changes in the settings which I carried out. However, after doing that he got a message that the administrator was using cs4 and that he needed to upgrade. He did this, but now there are all kinds of problems with some text disappearing and the cursor being all over the place.
Sd CS4 is unworkable and I can't find a solution for this, can he go back to his old version of CS3? And how to accomplish this? (he was using it succesfully until I made a simple change in the settings).
Silluf

http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
http://www.mozilla.com/en-US/firefox/all-older.html

Similar Messages

  • I just ran the updates for my MacBook Pro and now my iphoto will not open.  It says "You can't use this version of the application "iphoto" with this version of os x.  You have "iphoto 9.2.3

    I just ran my updates for my MacBook Pro and now my iphoto won't open. I get a pop up that say's You can't use this version of the applicaton IPhoto with this version of os x.  You have iphoto 9.2.3.

    This screenshot shows which previous versions of iPhoto are compatible with Mavericks.  It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
    Note 1:  every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
    Note 2:  If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1.
    OT

  • Mail will not work, it says "you can"t use this version of mail with this version of mac os x. mail version 4.5 help please

    Mail icon displays the following "you can't use this version of mail with this version of mac os x"
    Mail version 4.5
    It was ok on friday, my daughter used the mac to update her ipod to ios6, would this cause a problem?
    All my updates are up to date.
    Any help, thanks.

    !! WARNING !!
    about the September 2012
    "Security Update 2012-004"
    If you've got "Mail.app" in a folder OTHER THAN the root "Applications" folder,
    MOVE "MAIL.APP" TO THE APPLICATIONS FOLDER
    **BEFORE** INSTALLING THE "004" UPDATE!!
    Because *IF* you use OSX's integrated Software Update app from the Apple menu to do the "004" updating, and *IF* your Mail.app is NOT in the Applications folder, then buddy, you've got some sitdown fixit time ahead of ya and/or some internet tie-up time downloading the "004" update file itself.
    Been through it all, already.  In fact, just got done getting my Mail back up & running. And I tried everything short of attempting to unpacking my "Mail.pkg" receipt file using... whatever... even Pacifist couldn't get it out. So that fixit "Plan D" died quick. And I'm not savvy enough to use Terminal commands to do "Plan E," so that SUDO stuff was my brick wall.
    So I compressed my entire "Mail" subdirectory that contain all my emails, for safekeeping during the required surgery, or whatever would work, leaving the original Mail directory where it was. In case something bad happened in all my fixit whatevers, the one thing I *didn't* want to cross paths with was a hosed Library -> Mail folder. Then I'd be pssd. But I can wipe out that ZIP now 'cause all's well now. After 6 hrs of downloading thru a mobile broadband hotspot running at only 14KB/sec speed due to my having gone over my T-Mobile hotspot plan's bandwidth amount (throttled-down after reaching the limit, tho not cut off completely. Kinda nice, but it's a huge speed drop).
    I tried moving the two Mail.app versions around, compressing them & then trashing the original so they wouldn't be recognized, blabla, even booted my Mac in Safe Mode & reinstalled the "MacOSX 10.6.8 (Snow Leopard) Update Combo.dmg" update file, which in the past has fixed many problems. But after restarting, not this one.
    Like a dummy who ignored knowing better, I had my Mail.app in a folder other than the Applications folder, with only an alias to that being in the Applications folder. NOT GOOD ENOUGH. The updater don't see that as nuthin special or useful.
    So if you've got, like I've got, "old" icons for Mail.app (v4.5) in your Finder toolbar & in your Dock that all point to "Mail.app v4.5" in whatever folder you've got that in, other than in the Applications folder (where Apple apparently REQUIRES that it be located, and ONLY there, at least for OSX updating purposes), then after you download & autorun that "004" updater using Software Update, NONE of your pre-existing Mail icons will work. And MOST aggravatingly, **NOR** will your brand-new "Mail.app v4.6" work that came out of the "004" updating installation.  So basically, your Mail.app's... all of 'em.... are hosed. But only if you run the "004" update without your "Mail.app v4.5" being located in your Applications folder and ONLY in your Applications folder. And duplicates of Mail.app, scattered around your HDD??  Always a problem with many Apple apps.... The Apple software engineers apparently like 'em to be in the Applications folder, and in ONLY there, and ONLY the latest version, and ONLY 1 single copy of each on your entire HDD. They just don't seem to stress that enough, it appears. Kind of an oversight for them to not emphasize that, IMO...
    My recommendation for this particular September 2012 "004" update:
    If you run Software Update, and if you see the "Security Update 2012-004" listed as available for download, UNCHECKMARK IT.  DO NOT DOWNLOAD IT USING SOFTWARE UPDATE !  Instead, download the actual update file itself.
    Same thing, only a different way of doing it. Most importantly, you'll be skipping the auto-installation that Software Update performs.
    AND you'll have that update file on your HDD for future fixits, should a nasty "unfixable" problem come up.
    First, #1. Do a filename search for "Mail" (Option-Command-Spacebar). Scroll down to where the "Apps" are located in the list under the "Kind" column heading. First, find your Mail.app that's v4.5. Get that bugger into your Applications folder if it's not already there. Next, Trash all other "Mail.app" apps you see in that same list that you may have elsewhere on your HDD.
    #2. Go here: https://support.apple.com/kb/DL1586
    And download the actual "004" DMG update file: "SecUpd2012-004.dmg"
    And of course, it's a biggie.... 270MB... so watching grass grow may be involved here if you've got a slow connection (go to a MacDonalds & do it, like I shoulda done).
    3. After downloading, I'd recommend closing down all apps, emptying the Trash, and restarting.
    Then, after restarting, run Disk Utility's "Repair Disk Permissions."
    Then, doublecheck that the Mail.app version 4.5 is in your Applications folder.
    THEN fire up & install "SecUpd2012-004.dmg."
    Reboot.
    After the reboot, your Mail.app version 4.5 in the Applications folder will have become Mail.app version 4.6 in the Applications folder, and all will be well again.
    And you can dump that zipped-up "Username -> Library -> Mail" folder then, too.
    Happy Mac'in!
    Kevin Kendall
    Macbook 7,1
    (Apple's very last all-white Macbook model)
    2.4GHz - 256GB Crucial SSD - 8GB Crucial RAM
    OS 10.6.8 Build 10K549 + Win 7 Ultimate thru VMWare Fusion v5.0.1

  • How can I use the versionning tool to make a coherent solution to export

    how can I use the versionning tool to make a coherent solution to export all objects used in my project to other db schema for testing as well as for implementation .
    I want to know proper steps to Import/export objects.
    while I am exporting my Master repository and work repository then again importing the all , no problem comes all the physical logical schema mapping and mapping between interfaces retains but
    while I am trying to export and import one or two packages on the ease of testing then I am getting so many mismatches manually I am setting all why so?
    required ur suggestion
    Palash Chatterjee

    kelly-bot wrote:
    Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
    Our posts overlapped there.  Are you saying you could reliably drag one pixel with CS3? 
    What other issues are you having?  Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

  • Can you use educational version of either CS5 or CS6 for freelance work on your private computer

    Can you use educational version of either CS5 or CS6 for freelance work on your private computer

    Yes/ no/ perhaps. Depends on the specific S&T regulations. They're different for each country.
    Mylenium

  • Updated to 10.6.8 and now safari, system preferences, address book say "can't use this version"

    Got a new harddrive in my 2010 macbook pro and rebooted it with time machine back up from a older mac running 10.5.8.  I loaded snow leopard 10.6 from disc then updated to 10.6.8 on new computer after restore from back up.  Now the Safari icon, system preferences and address book won't open and a box opens saying you can't use this version of the application system preferences with this version of mac os X      You have sytem preferences 5.2.  or safari says you have safari 5.0.6 etc.  How do i update the apps so i can make them actually open.  I can get them open in a round about way but not from the icons on my sidebar. 

    If you have an os on the hdd, why not do a clean install of the os (erase the drive and reinstall osx snow leopard) For snow leopard you insert the osx disk, restart the machine while holding down the c key
    http://support.apple.com/kb/HT3910
    Message was edited by: victoryhat

  • When I try to install Lion it tell's me "You can't use this version of the application install mac os x Lion with this version of Mac os x" even though I have the latest update 10.5.8 of Mac os X?

    When I try to install Lion it tell's me "You can't use this version of the application install mac os x Lion with this version of Mac os X" even though I have the latest update 10.5.8 of Mac os X?
    The install icon has this sign on it 

    moose0422 wrote:
    You can't install Lion over Leopard. To install Lion, a requirement is Snow Leopard. So you can either upgrade to Snow Leopard first or you can make a bootable Lion install disc and use that to wipe your hard drive and install a fresh copy of Lion.
    So to make a disk would require you to purchase Snow Leopard and upgrade to 10.6.8 so you can use the App Store, unless you have access to another computer to download it from with your Apple ID. Remember it is about a 3.4GB download.
    Good Luck

  • I have updated to OS X 10.9 and now can't open Aperture, message reads You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... all i need to know is how to get Aperture to work again..help !

    I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !

    Software Update?

  • II  downloaded the OS X version 10.9 and my iPhoto version 9.2.3 will n.ot open.  I get a message that I can't use this version of the application I photo with this version of OSX.  What do I do now and how do I get the photos out of the old version?

    I downloaded the OS X version 10.9 and my Iphoto version 9.2.3 will not open.  I get a message that I can't use this version of the application I photo with this version of OS X.  How do I upgrade to a i photo that will run on 10.9.  Do I purchase a new program or can I do just an download?

    Check the "Purchases" page in the Mac App Store and see if there is a more recent version there already waiting for you.

  • I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!?

    I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought  a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!

    You're probably on OS X Lion?
    I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems.

  • If I upgrade to PE 13, can I delete earlier versions (PE 8,9 and 10)???

    If I upgrade to version PE 13, can I delete earlier versions (PE 8,9,10) to free up more space?

    You can uninstall, not delete, if you want to, but they don't take up much room.  There are features on the latest version that are missing from earlier versions.

  • Got message... you can't use this version of the application mail with this version of Max OS X, after i upgraded operating system to MAC OSA X Snow leopard.  How do I get my Mail?

    Hi ...just upgraded my Macbook pro to Mac OSX snow leopard and when I tried to look at my mail, I got this message "You can't use this version of the application mail with this version of MAC OS X".  What do I do now to look at my mail and receive new mail?

    After updating make sure you repair permissions and restart your computer.

  • Can't use older versions of Skype anymore?

    Alright, so I hate when things update, and usually I just put up with it for new innovative features. I was very content with Skype 5, and the upgrade to 6.0 was frustrating, but I dealt with it. Never at any point during my use of 6 did I prefer it to 5, even as time went on. 
    Finally, we get to today. I was forced to download Skype 7, and it is the most horrible, buggy, frustrating thing ever. I can barely do anything without it randomly freezing, or spiking in memory usage. I'm using the right version for my computer, my computer is very up to date on hardware, and I've had no software problems with ANY other program to this magnatude. And that's BESIDE the fact that Skype 7 just looks DISGUSTING. The organization of my recent messages and contacts is downright attrocious and I can barely keep my recent replies in check.
    The worst part is that I can't downgrade to a better version. After STRUGGLING to find an older version, it just tells me that Skype can't connect. Are you serious? I'm being FORCED to use this useless piece of junk? I've used a LOT of Skype (at least 5 hours a day daily since I got it.) And I think this is the last straw for me. I don't know what to do, I can't use this version, it's terrible.
    The question I'm posing in this thread, is how do I use an older version of Skype. If the answer is "I don't." Then I'm uninstalling and never coming back. 
    Solved!
    Go to Solution.

    I have the same problem. This morning my skype decided it was time to update itself. Even though (of course), it shouldn't even check for updates or ask me to update. Or at least these are my settings...
    However, this has happened before. But before, when skype updated, I could just uninstall it and install the version that I want to (keeping an exe with the proper version always did the trick). The things is that when I tried to install my older version after uninstalling, skype installer says that servers are down. Meaning that skype has stopped working with these older versions. They are now forbidden to install (even if you find an installer somewhere and OldVersion and OldApps have stopped support for skype).
    I am seriously considering forgetting about skype and using an alternative. Some people have mentioned the emoticons and the general layout of the new version that disgusts them. But I will also add that the way we used to send pictures over skype is now changed. And it's horrible! Sending a link with the shared photo is just waste of time. You'd need to open a browser, log in, open the photo and download it just so you can have it on your computer (wtf??). Adding to this is the decrease of its quality and resolution and the missing name of the picture.
    Thank you for reading (a potato).

  • You can't use this version of the application "logic pro" with this version of os x

    After installing all of Logic Studio (i.e. install dvd, audio content 1-3, jam packs 1-3), my laptop concludes that everything is installed successfully, however, when going to open to Logic, error icon appears and says:
    'you can't use this version of the application "logic pro" with this version of os x'

    Thank you! I found that just after I entered the question. I reinstalled everything two times, updated software, but was still having issues. But, I specifically updated the 9.1.8 (which was supposedly included in my standard software update). Guess I needed to give it some extra attention and affection.
    P.S. - Why do I feel like the more I upgrade versions of OS X, the worse off I am getting or am? Isn't it supposed to be opposite...isn't it supposed to make things better...come on, mac...where you at? mt. lion or mavericks. I'm downloading Snow Leopard to make some programs run. (um, yeah).

  • You can't use this version of the application Mail with this version of Mac

    I just installed 10.6 and all seemed well until I tried to load Mail. I got this response
    "You can't use this version of the application Mail with this version of Mac You have Mail 3.5".
    I successfully reinstalled 10.6 and I also reloaded the apps that were contained in another folder on the CD. I get the same message every time I try to load the Mail program. I deleted the "mail plist" file and that did not work. So I recovered my old one from Time Machine. Still dead!
    My poor wife is so frustrated that she is now using my machine!!! HELP PLEASE!

    I successfully reinstalled 10.6 and I also reloaded the apps that were contained in another folder on the CD.
    Why would you "reload" any apps? They should have been installed when you installed 10.6. Where exactly did you reload them from?
    So I recovered my old one from Time Machine.
    ...which undoubtedly still contained the old copy of Mail from your last Leopard backup, and not the current version of Mail that should have been installed with 10.6.
    What you need to do is reinstall the appropriate version of Mail from your Snow Leopard install disk. You can install one specific program from the install disk using [Pacifist|http://www.charlessoft.com> - though, check carefully to make sure it's been cleared for use with the Snow Leopard install disk!
    Whether that will fix your problem or not, I don't know, as I don't know what exactly you've done. It sounds like you've done a lot of things you should not have done, mixing components of your older system into your newer system. It is entirely possible you will need to reinstall the entire system.

Maybe you are looking for

  • Dynadock video drive not working - missing displayLinkCore.msi

    I've just installed my new dynadock with my laptop. OS windows 7 64 bit. The video drive however doesn't seem to install properly and I now just get a message saying that it can't find the predefined path to install the displaylinkCore.msi software.

  • VB 2008 and CR 2008 (chopped off vertical text)

    I have an annoying error that does not make any sense to me.  My development environment consists of Visual Basic 2008 Professional as well as Crystal Reports 2008.  I was first using the Crystal Reports 2008 Basic that came packaged with Visual Basi

  • Something wrong in writing a new file

    Hello, I'm new to Java and I seem to have trouble in writing a string to a file. Here is the code: void show_seat()           try                BufferedWriter tr=new BufferedWriter(new FileWriter("try.txt"));                for(int i=0;i<5;i++)     

  • How to Connect to MySql5 from WSAD 5 ?

    Hi , My JDBC connection program is working fine when I'm typing my program in a notepad .But its not even loading the driver in WSAD .What should I configure ?I have a mysql-connector-java-3.1.12-bin.jar driver on my system ,but I didnt configure WSA

  • Problem calling java method from c

    Hi , I'm trying to call a java method from a C program. it gives no error during compilation as well as building the application. but when i tried to create the JVM by running my application it pops up the message "The application failed to start bec