Can QuickTime for Windows read .vob files?

Can QuickTime for Windows read .vob files so I can edit them? I have some .vob files that were recorded from old VHS tapes and want to share the content with others. Can I read in the .vob into QuickTime, edit them, and then save them as mpeg or wmv movies?
Thanks!

Hi Daniel,
There are several options. I'll just post what works for me.
Perian is a small component for Quicktime Player (and other apps that use QT) this adds many more codecs that Quicktime PLayer can play.
http://perian.org/
Movist is a player, much more capable than QT (play lists, remember last played file, more control for sub titles etc) It can play all QT formats using Quicktime's codecs including formats when Perian is installed , but also uses FFmpeg to decode nearly anything you can throw at it.
http://code.google.com/p/movist/
VLC is another player. Not as elegant as Movist, also play nearly anything you throw at it.
http://www.videolan.org/vlc/

Similar Messages

I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory." I just trying to get the latest version of iTunes. Thanks

"Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Where can I download Quicktime for windows?

Where can I download the free Quicktime for windows? All I found on Apple's site was Macintosh versions.

Apples page uses "detection" scripts to serve up the proper version. Log in using a Mac and that is the only version the links send you to. Same for a PC.
Visit a friend that has a PC and burn the file to a CD.

I received an email containing pdf files. I am using Adobe Reader Touch for Windows 8. File doesn't open

I received an email containing pdf files. I am using Adobe Reader Touch for Windows 8. File doesn't open. I am a new user to Windows 8.

The full featured Reader for Windows 8 is Reader XI.
Reader Touch works in all Windows 8 systems BUT it is intended mainly for use in mobile tablets - I see no particular reason to use it unless you can'r run Reader XI. Given it is mainly for use on mobile that can't use Flash, we aren't likely to ever see the development team spending their time on this.
If you want the latest and greatest - at least try Reader XI, not X! (Flash is a separate download, it will prompt).

64-bit version of Quicktime for Windows

I'm running 64-bit version of Windows 7 via bootcamp. I'm running 64-bit version of Microsoft Office 2010. I have the latest version of Quicktime installed 7.7.3 something. I can play the file on the desktop no problem, but when I try to insert the file into Powerpoint or play a file that I inserted previously into Powerpoint on a different system, it says either Quicktime unavailable or you need a 64-bit version of Quicktime in order to insert the file.
So, exactly where is a 64-bit version of Quicktime for Windows because apparently the one on the Apple website for Windows is not 64-bit. Everyone keeps saying download the 64-bit version of Quicktime. Great, tell me where it is. There is no option for 64-bit on the website. It doesn't even say it is 64-bit. It just says its compatible with Windows 7. Powerpoint 2010 64-bit MUST have a 64-bit version of Quicktime in order to insert or play any Quicktime file. The OS doesn't give a rats @ss one way or the other.
The file I previously inserted was playing on a system that apparently had a 32-bit version of Powerpoint installed. That machine defaults to VLC player on the desktop. It has no issues with the file. It's the Quicktime Player mismatch on my machine that is giving me grief. If I knew Office was going to be a PITA if I installed the 64-bit version I would have stuck with the 32-bit version.
Ideas? Where is the 64-bit version? How do you tell it is 64-bit? How do you force the installer to make sure it ONLY installs a 64-bit version of it?

If Microsoft merely off their own decided that only a 64-bit version of QuickTime was going to be supported by them and did not both checking such a beast existed then this is perfectly believable behavior on the part of Microsoft and they should roast in **** for it.
If Apple led Microsoft to believe that a 64-bit version of QuickTime was going to be released like a 64-bit version of iTunes for Windows has been released but then backed out then this is equally believeable behaviour on the part of Apple and then equally the guilty parties at Apple should roast in ****.
It should be noted that the 64-bit version of iTunes is able to play videos via the 32-bit version of QuickTime. This suggests Microsoft programmers are weak with the force. This would tend to support my theory that Microsoft despite being the biggest software company in the world are better at making hardware than software.
Moving on to trying to be more constructive…
Clearly as things stand using the existing and only official version of QuickTime for Windows which is 32-bit only is not going to work in 64-bit Office. It might therefore be worth looking at trying the following.
Uninstall completely Apple's 32-bit QuickTime for Windows (if installed currently)
Install QuickTime Alternative - see http://www.free-codecs.com/download/QuickTime_Alternative.htm
I have no idea if QuickTime Alternative is 64-bit, I have no idea if it will work in 64-bit Office even if it is 64-bit. However it does work in Internet Explorer for Windows, it is free and therefore will cost you nothing to try. If it does not work you can then always uninstall it.
As another even more abtruse solution, you could try loading your PowerPoint file in to the free iWorks i.e. KeyNote via a free iCloud account. It will allow importing PowerPoint files and will even work in Internet Explorer.

Quicktime for windows doesn't work, wont let me uninstall or update.Help!

Quicktime for windows doesn't work, won't let me uninstall (tells me fatal errro) or update (tells me it encountered an error on installation). Help!I am running Windows XP on an Intel pentium PC. Any ideas? Dvora

When you get this fatal error uninstalling, try a full removal of iTunes and related programs with an installer clean up of any that do not uninstall cleanly:
Here is a method:
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
To run the program – All Programs>>Windows Install Cleanup
http://support.microsoft.com/kb/290301/
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

Quicktime for Windows cannot keep up with HD video

I just bought a new Aiptek GO-HD video camera. It records in H.264 format using .MOV files as the container. I don't know the specifics of the files, but they are 1280x720 and the files run at approximately 2 GB per hour.
The camera came with a decoder to allow Windows Media Player to play back the files, which works OK (the quality is fine, but the controls don't always work). The CODEC is identified as: NewSoft MPEG Video Decoder Filter (H.264/AVC). Windows Media Player shows up using 80% of the dual cores (40% of each).
When I try to play back the files with the current version of Quicktime, the video is a bit choppy. Quicktime shows up using 60% of the dual cores, but appears to use more of one than the other (neither is pegged at 100% though)
The files play back fine on a relatively high end Mac - I'm not sure if the different is that it's the Mac version of QT or that it's higher end hardware.
Two questions:
First - is it a CPU limitation or a Quicktime for Windows limitation?
Second - if I buy Quicktime Pro, will I be able to edit and encode the video without the stuttering?
I'm willing to accept temporary issues as long as I can produce videos that will be playable on the right hardware (or converted to other formats). I might eventually get a Mac Mini if that will work for editing these files.
If you want to check it out, I've temporarily posted a 13 MB video to http://afterburner.net/temp/cameratest/cameratest.mov
Many thanks,
Rick

http://www.goaiptek.com/samples/GO-HD_video-sample.MOV
Sample file from the creators of the camera.
Movie Properties window of QuickTime Pro shows H.264 but the Movie Inspector windows shows AVC with some garbage characters.
I was able to edit either file (copy/paste) without issue. I also exported a portion of your file using AIC (Mac format) and will test later with other codecs.
H.264 Video is CPU intensive and my 1.4GHz Mac mini couldn't play the file without dropping frames and the fan kicked into high gear.
So you'll need a powerful machine to view the file but an average one could do the editing (as long as you don't mind load noises and dropped frames during playback).
It's a $300 camera that does HD? Amazing.

Where is the download page for Quicktime for Windows?

Can someone give me the URL for the Quicktime for Windows download page on Apple? There used to be a link on the Quicktime for Mac page but since the site redesign I can't find it. Thanks

omgosh ! soooo frustrating everytime i download windows media player download complete box comes up & then i click on open and it says this file is not a movie ... so then i just clicked on the download after reading your suggestions and when done downloading my iphoto came up and it said this file cannot be supported .. am i supposed to have sum kind of software for apple ?? what am I doing wrong ?? I know that i have a mac os X ..omgosh sooo much stuff to learn on this thing ! i never know which way to go :o(

Quicktime for Windows -- on Vista -- opens a .mov movie once, then won't open the move and Quicktime won't even open itself. I've installed the latest version, and upgraded it to Plus as well.

I am having trouble opening .mov videos with Quicktime on my PC with Vista. I installed the latest version of Quicktime for Windows (V.7.7), and upgraded it to Pro. It will open a .mov file once, then after that it will not open any .mov file and in fact, when I try to open the Quicktime player it will not open itself. If I switch users to Admin, it all works fine, but when I go back to my regular role (where all of my preferences and programs are there for me to use), the same thing happens. An .mov file will open once, then never again, and the Quicktime player seems to be disabled.
I've tried different .mov files, so it's not a corrupt file that's the problem. And, in the past (a couple of Quicktime versions ago, I guess), all of this worked just fine.
Any helpful suggestions would be appreciated!

I have the exact same problem. They play on my Mac under Snow Leopard. Transfer to Vista gets a window with black and white and some other noise. No sound either.

Help with Quicktime for Windows 7 64-bit

I am having a problem with the latest version of Quicktime for Windows. When I launch Quicktime and then 'click' on any icon for download I can see the sentence, "Connecting to iTunes" and then I am redirected to download iTunes... Problem is that I already have iTunes.
Windows 7 Ultimate 64-bit SP1 and up to date.
iTunes version 11.1.3.8
Quicktime version 7.74.80.86
I Unibstalled both products, using the guide provided from Apple. I, then downloaded and installed iTunes first, then I downloaded Quicktime and installed it. I had the same issue. Next, I went to Control Panel/ "programs and Features, used the "change" option and clicked "repair". I did this for both iTunes and Quicktime. They ran fine. No error messages, nothing in event logs, no trace of an install log to try to diagnose this myself. Does anyone have this problem, or can anyone help me to start the diagnosis necessary to solve this?
Second issue came to light after all of the steps I performed; Before, I would conect my iPhone to a USB port and iTunes would launch automatically. Now, it does not. I see my 4s in devices and I see a normal state using device manager. So, I went to "Default Programs" and selected my 4s and the dropdown window no longer has an option for iTunes. However, when I go to choose a default program for audeo, etc. the dropdown mwnu has an option for iTunes.
Thanks for reading and I would like some help.
Doug Shreve

I found the problem and the solution. In Internet Explorer ver 11 / manage plugin's, make sure that the Apple plugin's are enabled. My setings were incorrect, the plugin ws siabled. Enabled it and all is well!

QuickTime on Windows Mac PICT File Text display doesn't work

There is a problem in QuickTime for Windows, which was there with version 6, and still exists in version 7. I have a Macintosh format PICT file, generated in Illustrator, that contains text and graphics. The text is in Arial font of a particular size. Viewing this PICT file on Windows within the QuickTime Player AND the QuickTime PictViewer, the font is scaled far larger than it is in the Mac version, to the point of going way outside a rectangle drawn around the text.
When this same PICT file is imported into Excel or Word on Windows, the text aligns and displays correctly, and at the correct size.
I am a software developer, and I have run PICTS through Quicktime programmatically, and there seems to be a real problem with text handling.
Anyone else seen this? Any ideas?

Let me also clarify this by saying that the font I am using exists both on Windows and Mac platforms.

Itunes + quicktime for windows

i installed itunes + quicktime for windows. and the problem is, itunes doesn;t sync my ipod..so what i did was,i uninstall the itunes and reinstall again but the quicktime is not there anymore?is that normal?
and one more thing,after i uninstall and reinstall it..i can't open the itunes anymore. there's a box popped out,stating that " itunes has encountered a problem and needs to close. we are sorry for inconvenience.
i try open it a couple of times but still the same.
please help! i'm new to this.

Take a look at the post's by Primus Bodacious in this link
http://discussions.apple.com/thread.jspa?threadID=688433&tstart=30
Also may be of help
http://support.microsoft.com/?kbid=308421
http://support.microsoft.com/kb/308419/

After migrating to a retina macbook with mountain lion I can not play windows media player files with flip4mac anymore

After migrating to a retina macbook with mountain lion I can not play windows media player files anymore. I use flip4mac pro 3.0 and quicktime 7.6.6.
The message I receive is: De bewerking kan niet worden voltooid. (OSStatus fout -50). I also have problems with zip files that can not be saved on the desktop anymore while unzipping.

I actually installed Quicktime pro and Flip4Mac Pro again after I bought the Retina Macbook. Today I did it again but still get the same OSStatus error -50. I guess there is some old file that has to be removed. Flip4Mac comes with an uninstaller. Quicktime does not.
I read that his could be something with security that is why I mention the problem with the zip files as well.

Issues with playback on Quicktime for Windows

Hi All,
I created a little slide show within iPhoto containing 290 pictures and lasting about 30 minutes. I exported it to a .mov file which was added as a video clip within FCE. Next, in FCE, I added background music, some video transitions and exported the completed project using H.264 codec. The .mov file plays fine on the Mac within the Quicktime Player. But not so hot on a Windows XP Pro laptop. In the final 90 seconds of the 30 minute movie, the screen goes green and the audio is replaced with static.
I have all of the updates for my workstation and the tools that I am using, (FCE, iPhoto). I have tried different versions of Quicktime for Windows, re-exported the movie from FCE and tried playback on different XP systems all with the same result.
Again, the first 28:30 of the movie plays perfect and looks great, but that last 90 seconds goes nuts.
Unfortunately, the presentation of this video requires that I play it back on the PC laptop.
Thanks for offering any advice you may have.

Hello,
I am currently trying to play the file directly from the computer's hard drive. I will take your advice and export again as an mpeg. Any advice on what mpeg settings render the best looking videos?

I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file re

I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file readers as well, and for some reason they won't work either. I have 5 computers running top end processors and RAM. By this I mean I have one, this one which I am using that has an AMD Phenom Black 3.2 Quad-core with 8 GBs of Corsair top DDR2 RAM, my other two AMD have either an Athlon II triple core with 4 GBs of DDR2 Corsair RAM, one with the Phenom X4 965 3.4 GHz Quad-core with 8 GBs of their best DDR2 RAM, and two Intels with the i7 920 Processors using the triple channel 1366 socket processors and one with 8 GBs of low latency DDR3 RAM and the other with 4 GBs of the same RAM. I am getting the message on this one, which has a fresh install of XP Pro X64 operating system, as do the other 4 as well. I have run Avast Business Pro Anti-virus on this one, which I am getting the message on with a single result which I deleted, and also both Spybot Search and Destroy, which came back clean as well as Malwarebytes Antimalware, which got a lot of tracing cookies now removed, and SuperAntiSpware which also found a few cookies also now deleted. Can you tell me what I need to do to get these files to show as .pdf files rather than as a clean blank page. One other issue is that I wish to know how to turn off my downloads so they are saved and Mozilla will give me the option of returning them instead of me losing them all together as it does now. Thanks for your assistance. If there is another Adobe reader I should download and install, could you provide me with the link to it? I appreciate your assistance here
== When I download and try to read a .pdf file and when I am asked to turn off all Firefox files and if I do, I lose them since I need to know how to save them without rebooting my computer.

Brilliant! Problem solved! Thanks so much.

Can QuickTime for Windows read .vob files?

Similar Messages

Maybe you are looking for