Can R/3 4.6B run in V5R4?

I have a customer who still wants to run R/3 4.6B in V5R4 now and upgrade 4.6B to 4.7 next year. I could not find information that this is possible or supported. I figure that if R/3 4.6B can run over 4.6D Kernel, then it should be OK running in V5R4 but I do not know this for a fact. Could someone please help confirm or otherwise?
Thnaks in advance.
Satid S.
IBM Thailand

Hi Satid,
even this is NEARLY possible ))
So: do us all a favour: Do NOT go for 4.6B EBCDIC !!!!
I know, that this is not fully supported to go to 4.6B ASCII as part of a migration. But, I did this already and it works.
BUT: It will end up in 4.6B and NOT 4.6C ...
but: you can directly upgrade from 4.6B to ECC 6.0 what you want.
As this is not fully supported (only via note xxx) and especially the migration to 4.6B ASCII is not official, you might want to contact an experienced person.
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Similar Messages

How can I disable addons from running on certain tabs, windows, or websites, without having to create a whole new profile?

Not every potentially site-breaking addon has a site whitelist or enable/disable list. While some addons exsit for "sandboxing" tabs - it only sandboxes the pages loaded on that tab, not what the browser/addons do to them. I've already searched for solutions, and frankly, I'm surprised that this question hasn't been asked before until now: Why can't multiple "profiles" be run side-by-side, on a per-tab and/or specific-website(s) basis, in the same browser window?

Basically any addon that affects ssl settings. Not all of the extra "hardening" to ssl that addon does results in a certificate error or warning when I try to load a page. Some of them cause redirect errors or even just a blank screen with nothing loaded at all. Even if I "whitelist" a page in an addon's settings, that page could still not load because the addon has changed the browser's settings itself...

How can I make my program run faster ? (changing colour indicators quicker)

Hi everyone, I have a program with 100 indicator colour backgrounds that change according to 100 temperatures. A case structure (with 100 cases) sets the background colours one after the other and runs in a while loop with no timing (as fast as possible). The temperatures are loaded up from an array that is initialized at the beginning of the program. The idea is to have an overall view of the change of temperatures (just by looking at the change of colours). Everything works fine except that it doesn’t run fast enough... The change of colours is not smooth at all ... you can really see the increments. It works fine with 20 temperatures for instance. 1) Would anybody have a solution to improve this? I was wondering if Labview perhaps actualises all of the values each time one changes (just like with the excel cells: an option that you can desactivate and make things run quicker when you use a macro) which would make a big loss of time....
There is no data saving this is just a post treatment program. So My my program isn't doing anything else.
2) I have attached a screen print of a problem a faced when making up the VI I attached. Why can’t I wire directly to the Index Array that is in the For Loop in my VI… I had to go throw a shift register to make up the example. When going back to my original program I couldn’t use the index array a second time (screen shot). Thanks a lot for any help, Regards, User
Solved!
Go to Solution.
Attachments:
Forum question.vi ‏13 KB
forum.JPG ‏50 KB

Here's a possible solution:
Ton
Message Edited by TCPlomp on 11-03-2010 11:16 AM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
Forum question.png ‏23 KB

Can a java program be run in the background?

Hi all,
Can a java program be run in the background without the user being aware of it? I need to make a program that continuosly monitors a pc at regular intervals and runs at all time. It should be hidden(shouldn't display on the screen while running) from the user, and also, can it be run as a system file so that even if a user checks he/she would think of it as a system file?

I'm the administrator of all the computers. Then as I said there are commercial applications that do that.
Presumably you expect a problem now. And implementing an acceptable solution is going to take you months. Because not only need to 'hide' the application, you also need to set up all the monitoring and logging capability. And the first will require quite a bit of JNI work along with testing (in particular as it could interfer with existing applications on the users computers.)
I need to
install the software in all the machines and i want
that the users who use the machine should not be able
to close the program through the task manager. If the users have admin rights then they can terminate a windows service.
And if they don't have admin rights then you can simply turn off the ability to install anything.
I want
to know what the resources of the computers are and
that if anyone has added a resource to it or
not(attaching a flash usb thumbdrive etc). Lots of JNI.

Issue with Illustrator CS6 - can't get it to run

Since a couple of weeks ago, I have an issue with Illustrator CS6 - can't get it to run When starting the application I get the following error:
"The procedure entry point ?AcquireVarient@ImageInterface@drawbot@dvaui@@QBE?BV?$intrusive_ptr@UImageInterface@drawb ot@dvaui@@@boost@@V?$rational@J@5@@Z could not be located in the dynamic link library D:\Program Files\Contents\Windows\Illustrator.exe."
I'm running it on Windows 8 (x64). I have multiple other Adobe applications installed, which are running fine. I've tried solving the issue with reinstalling Illustrator - multiple times. My GPU driver is updated to the latest version.

I have this issue as well on my Mac and called tech support 4 times and they can't fix it. Adobe has really gone down hill in a short amount of time!!
Only thing that worked (as a temporary fix) is to create a new user and toggle back and forth between two users which is very annoying. Adobe has tried uninstalling, reinstalling, taking over my computer remotely, trashing plugins, verifying permissions but the fact remains that we bought CS6 four weeks ago and Illustrator doesn't work.
I'm going on Facebook to let others know.....don't buy Adobe, it doesn't work and they don't know how to fix.

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive. Can't get it to run Hardware Test. Disk Utility says disk OK - files are there. What can I do?

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
 Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6

My iMac running Mountain Lion can't see my iMac running Snow Leopard on my network.

My iMac running Mountain Lion can't see my iMac running Snow Leopard on my network. Both Macs work fine and the SL Mac can see and connect to the ML Mac.

There isn't a script.
Mail connects to any standard email server.
Open the Connection Doctor from the Window menu.
Click Show Details and Check Again.
What errors does it post trying to connect to your email provider.
I dont' think there is any personal information in the output, but you might want to sanitize the output in a text editor before posting the output here in case there is a login user name or something like that.

New-Asset Report - awesome, but can't get it to run?

Howdy - I am trying to run the awesome new-asset report that Zachary Loeber shared with the technet community.
The script is here: http://gallery.technet.microsoft.com/Excel-and-HTML-Asset-0ffbf569
However I can't get it to run against 1 server or multiple servers.
I followed this information someone else asked and I get back many errors, all related to the parameters.
Can someone help me out with this?
A. Should this be saved as a function? And then I've read conflicting or maybe different ways to run a function. Should I do import-module or just run the script as a single command line, and I've had this issue with other functions. Should they
be put in a specific location on my system? I'm newbie, so thanks for the help!
B. When I run this, I've tried using this simple command: .\New-AssetReport.ps1 -Computers testserver1.domain.local -PromptForCredentials -Verbose
C. Then I tried this example as well from a single line or creating another ps1 script, fails either way.
D. What variables are required to be filled in, and what parameters are available such as report type, include memory, but not disk, etc?
Here's the error if I enter the command like this: .\New-AssetReport.ps1 -Computers testserver1 -PromptForCredentials -Verbose
New-AssetReport : Cannot process argument transformation on parameter 'SaveDataFile'. Cannot convert value
"System.String" to type "System.Management.Automation.SwitchParameter". Boolean parameters accept only Boolean values
and numbers, such as $True, $False, 1 or 0.
Here is the error if I use the other example which is below. I get many errors, all tied to the parameters such as -verbose, etc.
$Servers = @('Server1','Server2')
.\New-AssetReport.ps1 -Computers $Servers -PromptForCredentials -Verbose
New-AssetReport : The term 'New-AssetReport' is not recognized as the name of a cmdlet, function, script file, or
operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try
again.
-ReportContainer : The term '-ReportContainer' is not recognized as the name of a cmdlet, function, script file, or
operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try
again.

Hi,
Please ask the author your question on the Q&A tab for that gallery entry.
Bill

Can not fiend the payment run 02.09.2009 in transaction F110

Hello Experts,
Can you solve following problem - We have a problem where the end user can not fiend the payment run 02.09.2009 in transaction F110
Tha payment run has been executed and document is shown in log SM37, But payment is not med....further user has to made the payment manually....we have also check with workflow there we have seen that order is posted to bank.
I can not find the reson why the payment run is not shown in F110...and after running the payment run successfully why the payment is not mede....
Thanx
BR
Vaibhav Dhabe...

Hello Stacy,
Thanx for reply but the print program you mention above is not there...please suggest what I can do next to this
BR
Vaibhav

I can't shut down my MacBook Pro. I'm getting the following message: "The Finder can't quit because some operations are still in progress." How can I determine what is running?

I can't shut down my MacBook Pro. Each time I try, I get the following message: "The Finder can't quit because some operations are still in progress." How can I determine what is running?

Yea,
I bought an original CRT iMac two day's before they were launched, which got the reseller into trouble, and had it replaced by APPLE.
This was a great learning process for me dealing with the glitches. :-)
I LOVE MAC. Now own 4 and on my 10th. in 15 years + 7 bought for family.
Cheers,
Tom

How can I determine what is running in the background on my ipad?

I have had my Ipad for 6 months. I use wi-fi and cellular 250MB data plan. I have never exceeded 250 MB in a month. This month I ran out of data in 5 days. Also, I usually get a couple of days before I have to recharge. Now I need to recharge in less than a day. The only thing I can think is something is running in the background. Is there a way to see what is running in the background (this is my first apple product, I have always used windows products so I am not sure I am using the apple nomenclature), I have rebooted so I will see if that fixes the problem. I am curious to see what is happening in the background

A double click on the Home button will reveal a tray containing all apps that are currently running (suspended?).
Side swiping this will reveal as many as are active, with a swipe to the right when on the first display will reveal further controls for the iPad, mainly relating to the iPod part, but also containing a screen lock option I believe.
Click and hold any one of them till they 'jiggle' and show a - you can then click this to remove it, relaunching the app as required in the normal way.
Regards,
Colin R.
Message was edited by: Colin Robinson
PS Tap the Home button once to get out of this mode.

Can't get Videos to run on the Internet

Can't get Videos to run on the Internet. Clicked to watch a video and nothing happened. Sales person in Apple store said to get "Flip4Mac", free edition, which is what they used in store as the files on this site and in Windows Media. I downloaded it and I think I installed it. At least it said is was installed and updated. But when I went to my Son's favorite website, Nascar.com, when he clicked on a video to watch nothing happened. Anyone have any idea what's wrong?
Thanks in advance for the help.....Nancy

First off, I'll list all the items that I use to play, just about, all media on the web:
Flip4Mac
(as you might have found out, Windows Media Player for the Mac is no longer supported)
VLC
Real Player
Perian
Adobe Flash
Streamclip
All that being said, there is still some unplayable A/V content on the web. Even though it's listed as WMV, they are really processed with a codec that is underneath that wrapper, and unsupported by any of the above listed apps and plug ins. If any content like this is found on a high profile site, and is in wmv format, then the Flip4Mac people request to be told, so they can see if compatibility can be written in on their next update.
Generally, video playback on a Mac can be somewhat complex. Would be nice if everyone used Quicktime, but I don't see that happening on the PC end of things anytime soon. So, we'll all just have to use what we can to view content.
RE: learning Leopard....there are some tutorials on the Apple support site, but I've always found the suppot discussions to be pretty helpful. I've never been one to get a lot from manuals. Mostly, I get my knowledge from working with the apps I need, and getting advise from others who have done whatever. Occasionally, there's a class at the college that you might look into. Anyway, feel free to ask any questions you want on this forum, or drop me an email. [email protected]

How can I get Firefox to run KIOSK mode on Android phone? I am trying to use rKiosk but have not been successfull. I'm running 10.0.3 on the phone.

How can I get Firefox to run KIOSK mode on Android phone? I am trying to use rKiosk but have not been successfull. I'm running 10.0.3 on the phone.

Found an app to lock down the phone. SUREFOX!!!

Exchange 2013 remote session running as PowerShell version 2.0. How can I get it to run version 3.0?

I'm trying to use the newer Powershell 3.0 features, particularly the ability to disconnect/reconnect a remote session, for our Exchange 2013 administration tools. I have 3.0 on my workstation, and am connecting to a remote session on an Exchange 2013
server (on Server 2012).   Even LOCALLY on the Exchange 2013 server Exchange Management Shell I get the same behavior:
Exchange Command Shell on an Exchange 2013 server (running Windows Server 2012)
[PS] >$PSVersionTable
Name                           Value
PSVersion                      3.0
WSManStackVersion              3.0
SerializationVersion           1.1.0.1
CLRVersion                     4.0.30319.19117
BuildVersion                   6.2.9200.16628
PSCompatibleVersions           {1.0, 2.0, 3.0}
PSRemotingProtocolVersion      2.2
[PS] C:\Windows\system32>Get-PSSession
Id Name            ComputerName    State         ConfigurationName
1 Session1        mercmbx35r.n... Opened        Microsoft.Exchange
[PS] C:\Windows\system32>$session = Get-PSSession
[PS] C:\Windows\system32>$session.ApplicationPrivateData.PSVersionTable
Name                           Value
PSVersion                      2.0
PSCompatibleVersions           {1.0, 2.0, 3.0}
PSRemotingProtocolVersion      2.2
BuildVersion                   6.2.9200.16628
CLRVersion                     4.0.30319.19117
WSManStackVersion              3.0
SerializationVersion           1.1.0.1
How/where can I force the Exchange session to run version 3.0?
Thanks in advance,
Rick Tatem

I still can't get it to work that way. I changed my cfexecute to:
<cfexecute name="C:\windows\system32\cmd.exe" arguments="/c C:\Inetpub\wwwroot\captcha\#cmd_filename#" outputFile="C:\testoutput.txt" timeout = "90"></cfexecute>
And I changed my bat file to have:
<cfsavecontent variable="cmd_content">
cd\
TSC.exe /s "#newString#" C:\Inetpub\wwwroot\captcha\#FileName# Mary (for Telephone)
</cfsavecontent>
The output file is showing:
C:\ColdFusion9\runtime\bin>cd\
C:\>TSC.exe /s "3.....P.....4.....Z.....8.....U.....7.....X....." C:\Inetpub\wwwroot\captcha\3P4Z8U7X-105724.wav Mary (for Telephone)
I still can't get it to run the exe. I have watched the process list while running this and the exe doesn't show up. I tried cfexecute on the exe directly before trying the bat method, with hard coded arguments, and it still didn't work. I am so lost right now this makes no sense to me.

How can I know which queries run in the TEMP tbs (Oracle 9i and 10g) ?

Dear friends, do you have a query which can shows which statements are running currenly in the TEMP tablespace?
Many Thanks in advance, Marcelo.

Marcelo,
you can check DBMS_XPLAN.DISPLAY_CURSOR - if you find a column TempSpc there, it's using Temp space.
select source from sys.source$ order by source;
select * from table(dbms_xplan.display_cursor(NULL, NULL, NULL));
PLAN_TABLE_OUTPUT
SQL_ID 5ywbw0z6gupwk, child number 0
select source from sys.source$ where rownum < 555555 order by source
Plan hash value: 1381731087
| Id | Operation           | Name    | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT    |         |       |       |       | 11492 (100)|          |
|   1 | SORT ORDER BY      |         |   555K|    37M|    87M| 11492   (1)| 00:02:18 |
|* 2 |   COUNT STOPKEY     |         |       |       |       |            |          |
|   3 |    TABLE ACCESS FULL| SOURCE$ |   572K|    38M|       | 1834   (1)| 00:00:23 |
---------------------------------------------------------------------------------------or for all your statements currently available:
SELECT t2.*
FROM v$sql s, table(DBMS_XPLAN.DISPLAY_CURSOR(s.sql_id, s.child_number)) t ,
     table(DBMS_XPLAN.DISPLAY_CURSOR(s.sql_id, s.child_number)) t2
WHERE t.PLAN_TABLE_OUTPUT like '%TempSpc%';Edit: Sorry, I didn't see you are also asking for 9i. DISPLAY_CURSOR is only available in 10g+ - but Tom Kyte and others have shown WorkArounds to use DBMS_XPLAN.DISPLAY from 9i to show the information for all available SQLs.
2nd Edit:
TempSpc only shows the estimation the optimizer makes.
You can check V$SQL_PLAN_STATISTICS_ALL for the columns max_tempseg_size and tempseg_size. In Addition please have also a look on [http://antognini.ch/about/] Blog [http://antognini.ch/2009/05/wrong-information-about-temporary-space-usage/] .
I used:
select PARENT_ID, ID, DEPTH, POSITION,
       MAX_TEMPSEG_SIZE, LAST_TEMPSEG_SIZE
from v$SQL_PLAN_STATISTICS_ALL
where MAX_TEMPSEG_SIZE > 0;hth,
Martin
Edited by: berx on Jun 17, 2009 4:11 AM
Edited by: berx on Jun 17, 2009 6:18 AM

Can R/3 4.6B run in V5R4?

Similar Messages

Maybe you are looking for