Can R12.1.3 and R11.5.10 be installed on the same server?

Hello there,
We are currently running Oracle eBiz R11.5.10, and would like to install the latest version R12.1.3 for testing purposes.
Can R12.1.3 be installed on the same server (for both database and application tiers) as for R11.5.10? Any pitfalls that we need to be aware of if we do this?
Thanks for the advice.
Cheers!

Nothing would stop you from installing 11i and R12 on the same server as long as ORACLE_HOMEs, APPL_TOPs, and COMMON_TOPs of each instance are installed in separate directories. The only pitfall would be the performance (unless you have sufficient resources).
Please don't consider this plan for production instances!
Thanks,
Hussein

Similar Messages

Can BO XI and CE 10 be installed on the same server?

We are preparing to upgrade our existing CE 10 to BO XI; however, we were unable to obtain a test server and will need to install it on the same server that CE 10 resides on (our development server). I heard that both versions could not reside on the same server and I need this confirmed by a SME. Thank you. ~emoreno

Tim,
I'm not sure that my question was answered. I just need to know whether CE10 and BO XI can be installed on the same server? I have a development server (not a VM) with CE 10 and another customer wants to install BO XI on the same server. I heard through other sources that BO XI and CE 10 cannot reside on the same server. I need to know if this statement is accurate? If BO XI cannot reside on the same server as CE 10, then our contracted vendor will have to provide t this customer with a different server. I need this information confirmed in order to notify my management.
Thanks...EMoreno

Can BO 5.1.8 and BOXI R2 be installed on the same server?

Hi guys,
Does anyone know if BO 5.1.6 and BOXI R2 can be installed on the same server, provided that the hardware is sized to cope with both environments?

Fernando,
Business Objects does not recommend that two different versions of our software be installed on the same server.
Thanks,

How can I using tpcall from one service to another service in the same server

When I using tpforward between two services in one server, it's working ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?
thanks
george

"george" <[email protected]> wrote:
>
When I using tpforward between two services in one server, it's working
ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?Basically, tpcall:ing another service in the same server is a no-no, unless you
a) are running a multi-threaded server (requires TUXEDO 7 or newer + compilation
options) or
b) use tpacall() instead of tpcall() and specify the flag TPNOREPLY. This is probably
not what you want to accomplish, though.
The reason is that TUXEDO servers by default (and always in versions before 7)
are single-threaded. If service A and B both reside in server X, server X will
be busy taking care of the call to A. If A makes a call to B, the call will be
put on the queue to X, but X will not look at the queue until it is done with
A, which won't happen until B returns... deadlock!
You can play tricks with starting multiple instances of X, but in the end you
will always face a risk (something lika a race-condition) for a dead-lock.
Solution: Move service B to another server (usually quite easy) OR switch to multi-threading,
if that's possible. Just make sure all code your service calls is MT-safe as well...
thanks
georgeHope this helps you,
/Per

Can different cluster of SAP Business One installed on the same Server

Hi!
Can anyone tell me if B1 different cluster version installed and run on the same server. Example B1 2005A AND B1 2005B. If it can, could you please include the procedure how can it be done.
Thanks,
Jo Borlagdan

No, A and B have different patch cycles - so there would be conflicts in SBO-Common. Therefore it will not work.
You could try to workaround that with named instances of MSSQL, but installation & update would need additional care + workarounds.
The best way to combine 2 SAP Business One cluster "servers" but still on one hardware would be to use a tool like VMWare... - but such a configuration has not been released by SAP - i.e. if there's an issue that could be traced back to the VMWare system, SAP might not be (li?)able to fix it
Sorry,
Frank
Message was edited by: Frank Moebius
BTW: Please note that you need to think eventually about conflicts with MS licenses. SAP has an agreement with MS which ASFAIK covers the license for 1 VMWare Windows system on 1 Windows PC so that we can use WMWare for SAP Business One sandbox systems - after RAM upgrades () it works fine...

How can I share Quicken and other apps with another user on the same iMac?

I would like to share some apps including Quicken with anoter user on the same iMac. I have put the Quicken app and the .QFX file in /usrs/share and changed the permissions to R/W on both files but when I log in as the other user and run Quicken it does not use the .QFX file and instead comes up with no accounts.

The Quicken app. should be in the Applications folder at the root of Macintosh HD. It's accessible to all users from there.
To share a file, (this from Finder Help menu)
"Sharing files with others who use your computer
You can share files with others who use your computer by placing the files in the Public folder in your home folder. Anyone with an account on your computer can read or copy the items you put in your Public folder (except for your Drop Box folder, which only you can open).
To share files using your Public folder:
Copy the files you want to share into your Public folder, inside your home folder.
To give a copy of a file directly to another person, copy it to their Drop Box folder (inside their Public folder), where only they can see it."
When opening a file just double-click the file - it will open the application automatically.

How can I sync settings and programs between 2 user accounts on the same mac?

Hi,
I have created 2 user accounts on my mac, one for personal, and one for work (but both for me). It's primarily for organization, keeping files separate, but also because I have two separate Dropbox accounts and only one can be installed per user. I want to know if there's a way to sync selected programs, files, and settings between the two accounts? Basically, I'd like to have the same programs and settings for both user accounts, and just different files.
I can't seem to find any info on this, but maybe I'm using the wrong terms!
Thanks!

To give other users read-only access to your iTunes library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
To give others selective access to your iPhoto library, you have the option of using iCloud Photo Sharing, if the privacy implications don't bother you. The images will be stored temporarily on Apple servers.
If you want to give full read/write access to more than one user, see the support articles linked below.
iTunes: How to share music between different accounts on a single computer
iPhoto: Sharing libraries among multiple users
There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions.

How can I show "Playlists" and "My music" side by side at the same time?

This was possible in the previous version of iTunes. When showing Playlist and My music at the same time it was easy to draw tunes from My music to the right Playlist.
My version of iTunes is 12.0.1.26.

Thanks for reply
ya ~ i've got a solution ~
actually i am doing a server for mobile phone to get data. Sometime 1 single ID will send twice a message (usually nokXX mobile phones) .. i use milli sec to check those message ....
n it seems working ....

Suddenly on DellXPS15z laptop reading email Firefox or IE Zoom goes from 100% serially down to an unreadable 35%. Size can increased with Ctrl and +/= keys. But then it repeats the same downsizing routine.

'''bold text'''

Hi Alex,
Take a look at this document, and select the appropriate scenario and try the troubleshooting steps. Please let me know if it helps you resolve the problem.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Crystal Report 8.5 and 9 installed on the same box

Is it possible to have Crystal Report 8 and 9 installed on the same server?

Hi Michael,
You can install Crystal Report 8.5 and 9 on same box.
However, there are chances that dll may conflict and few issues may occur.
Try to install on different harddrives.
Regards,
Shweta

How to Install R/3 and CRM on the same Server?

Hi All,
I would like to install R/3 and CRM on the same server (as the load is less). I know how to install them seperately.
I would like to have some instructions how to have them installed on the same server.
Thanks in advance.
Regards,
Vijay

As Sunil explained - MCOD (or) you can think to have 2 differnt DB SID's as weel 2 different SAP SID's. By default 1st Installation takes Listener Name as LISTENER & port 1527 when you are doing second Oracle installation use another lister name as LISTENER002 & give port 1526 ( for example).
MCOD will be the best option to unplug from oracle instalation requirement but - think of future plans. even it can be any size business don't think to do MCOD with SAP Business System like R3 .
Becuase qwe may have different requirements from the Business / functionla Team for refreshing / building the development system with a copy of production system - don;t get confused there are Techniques for Refreshing a Development Instance with production system also.
Any how you have to take decission to go with MCOD (or) not . I also request SUNIL to comment on MCOD installations with R3 system .
But I beleive Sascha Version is wrong - i can have multiple application servers of differnet products on single Box if my OS supports.
as application servers will have 3 individual mount point which points to different system
<Central Instance>:/sapmnt/<SID>/global
<Central Instance>:/sapmnt/<SID>/prfoile
<Central Instance>:/sapmnt/<SID>/exe
each SID NFS mount point can point to different sever & i can multiple application server of differnt SAP Products on 1 BOX.
Trans directory is problem - but it does not require either for installation (or) for runningAS instance .

SCCM - Branch Distribution point and Management point on the same server

Hi All,
Would like to know if any other SCCM roles like management point , distribution can be installed on the same server on which a branch distribution point is installed?
Rgs,

Hi,
Branch Distribution Points no longer exist in Configuration Manager 2012 and above.
I'm assuming you want to install additional roles on an existing server that is currently only acting as a Distribution Point and the answer is yes, this is possible, but it depends on which other roles you want to install and there will probably be some
prerequisites needed.
Can you elaborate on which roles you are considering installing?
Steven Hodson | http://www.stevenhodson.com | @_hodders

Lync 2013 Error Edge and RP on the same server

Hello everybody
We have the following issue:
In one Lync hybrid deployment with O365, the Edge and RP roles have been deployed on the same server.
The Edge services are configured to use different ports than 443, the Edge service is working fine, however; the issue is that the RP is not working at all. The most critical feature is the access to mobility services and that all O365 users view the local
users with presence unknown.
The server is configured with two nics, one to the internal network and the other one has configured two diferente IP addresses, each is one published thorught NAT to specific Public IP addresses for Edge and RP.
So far we identified that the Ip address that belongs to Edge services, is always listening on port 443, even when the service is stopped.
Any experience or idea is welcome!
Thanks in advance.
Regards.
Regards. Cristian V.

Someone got it working (not recommended): http://social.technet.microsoft.com/Forums/lync/en-US/8963a687-8125-4843-8a9a-2d1ee0c819df/iis-arr-reverse-proxy-on-edge-server-supported-i-dont-think-so?forum=lyncdeploy
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

HT4085 So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same

So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?

In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
Settings > General > Use Side Switch to: choose what you like the Side Switch to function as.

How can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

how can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

Tom Wolsky wrote:
The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
I'll try to replicate your gotcha - but no, that doesn't sound like fun at all!

Can R12.1.3 and R11.5.10 be installed on the same server?

Similar Messages

Maybe you are looking for