Can recieve mail but i cant send it

i have aol and my college mail set up and synced together perfectly. i can recieve mail for both and i am very happy with it. the only problem is that i can not send mail. when i do it says INCORRECT DOMAIN IN MAIL/RCPT COMMAND. im not exactly sure what i have to set up for the mai preferences. i've tried placing authentication to none and on password but nothing works. i would appreciate any help.
thanks

Well, I don't think you're going to be able to solve this problem if you don't know what the outgoing server settings should be, and in the case of your college account, there is no way for me to know either.
Instructions for setting up an AOL account in Mail can be found here:
http://members.aol.com/adamkb/aol/mailfaq/imap/applemail.html
The instructions are for Mail 1.3, but they can be used for Mail 2.x as well, noting that the Special Mailboxes preference pane is called Mailbox Behaviors in Mail 2.x.
You may also want to read the more general guide the above article is part of:
Accessing the AOL Mail System using IMAP - An Unofficial Guide
You may also want to open Mail Help and read the articles about sending problems, e.g. I can't send email.

Similar Messages

  • Im using iphone 5 with speint 13.1carrier. I can recieve sms but i cant send any .... Please help meeeeeeeee

    Cant send sms but it recieves properly ... Please help !!!!!

    Do you mean Sprint?  Contact them. SMS is a carrier feature.

  • I can receive emails but i cant send them through my school network

    I can receive emails but i cant send them through my school network.... its a @student.umass.edu  the tech at the store used the host names as mail-c.oit.umass.edu. The outgoing mail server he put in was smpt.mail-c.umass.edu  can someone please help me?

    Did you already check this article? iOS: Unable to send or receive Mail

  • TS3276 I have AOL on my Mac pro.I can receive Mail but cannot forward/send if I hit send the message goes to my outbox hit send it goes to

    have AOL on my Mac pro.I can receive Mail but cannot forward/send if I hit send, the message goes to my outbox

    Sorry Mate, I tried your suggestion ,but no joy.I now have 3 messages in my outbox,that will not send.
                                            Thank you for trying to help.
                                                                                   Ken.

  • I can receive mail, but I cannot send mail, my mobile broadband is 3 and my server is BT

    I can receive mail, but I cannot send mail, my mobile broadband is 3 and my server is BT. I have been to the Apple Store today. They did not resove my problem. Can anybody help?

    Try this. Check the primary outgoing mail server username and password and make sure that they are in the settings even if it says that they are optional.
    Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if you can then send emails.

  • HT1277 i have added my company e-mail add into my Macbook i receive mails but i cant send e-mails , anyone knows why ? i have tried all options in outgoing mail settings but it wont work !!

    i have added my company e-mail add into my MacBook , i recive e-mails but i cant send e-mails , anyone knows why ? i have tried all options in outgoing mail settings but it wont work !!

    Hello,
    The receiving email ports are:
    IMAP is port 143
    IMAP-SSL is port 993
    POP is port 110
    POP-SSL is port 995
    Outgoing ports are...
    SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

  • HT1277 i can receive mail but unable to send mail

    i can receive mail but unable to send mail

    I'm yet another person who upgraded to Maverick OSX. I'm now thinking, "BIG mistake". Mail was working perfectly. Then, last night, Mail stopped sending.
    I've checked everything. Comcast servers are set up correctly. Mail works fine on my ipad, but will not send. It gives me a SMPT error of "Cannot send message using the server comcast.net--authentication rejected" Comcast.net (Offline). I can not get it back online. I've also tried the fixes here, but there is no info.plist by those names in my library!
    Anyone have any other ideas how to get this working again? Apple's OS's have been pretty decently stable in the past. I had no thought that the upgrade would be so problematic. Live and Learn.
    Thanks for any suggestions.
    -Rachel

  • Can receive mail, but unable to send mail

    am able to receive mail, but unable to send any whether through Mail or Entourage.
    didn't have this problem yesterday. Strangely enough, i am still able to send mail through my yahoo.com account. so there's nothing wrong with my connection.
    is there any fix to the problem encountered in my Mail.app?

    Did you accidently change the port through which you send mail?
    What smtp server do you use to send mail out? and please check the port number of that outgoing mail. It should be 25 for your own internet provider.
    Peter
    also look at: http://discussions.apple.com/thread.jspa?messageID=2599274&#2599274

  • HT4519 I have loaded my email address on my Ipad but I can recieve mail but is unable to send mail

    Email account not sending mail but can recieve on Ipad

    Your outgoing server settings are probably incorrect. Check them.

  • I can get emails but I cant send them out. It has always been ok till today

    Can't send e mails but can reserve them always been ok till today :s

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

  • Can recieve mail but not relayed to local users, can't send mail,

    I am working on setting up a home server for web and email. I have server 10.2 and I can get the web working fine but the mail is giving me fits. The computer is behind by router on my private network. I have a domain name that is set for my router and it forwards all requests to the server. Have done that before with linux. I have set the computers network name to be the same as the domain name(probably a mistake). I can get the mail to be accepted by the server but then it gives a no user error when transfering to the local host for delivery. The only way I can edit using any of the tools is to type in the IP number and not the name.
    Should I have named it something like server.domain.com? It is not too far along to reformat and start over. How do you change the network name? Is the network name my problem? I have tried messing with the DNS but it is not as easy and it sounds for 10.2 as in later versions.
    Any suggetions would be helpful.
    David

    It's been too long since I've seen 10.2 to give you tips on it's mail config....
    The main issue you may have is that your router probably doesn't support loopback. This page has a good explanation:
    http://www.dyndns.com/support/kb/loopback_connections.html
    You can use /etc/hosts as described in the article if the machines stay in the office. Another solution is to change your router to one which does support loopback.
    Jeff

  • Just upgraded to iPhone 4s, can recieve mail, but not send it.

    Notifiaction says no password is entered.  There is a password entered, and it is correct.  What to do?

    You need to enter a password for the SMTP server also, not just the incoming mail server.

  • Exchange will recieve mail but won't send until...

    I have this issue with an SBS 2008 server with Exchange 2007. Incoming mail works fine with no problems but outgoing mail get stuck in queue. The weird thing is if I open server manager and click on hub transport immediately mail will start flowing through.
    I do have an issue with
    http://blogs.msdn.com/b/keithmg/archive/2009/01/06/exchange-topology-discovery-failed-error-0x80040a02-dsc-e-no-suitable-cdc.aspx  but I have a problem. Permissions were not the fix. When I enable IPv6 outgoing mail stop immediately and the mail troubleshooter
    says the server is not compatible with IPv6.
    So here I am stuck. :(
    Edit:I have disabled IPv6 in the router

    The weird thing is if I open server manager and click on hub transport immediately mail will start flowing through.
    I do have an issue with
    http://blogs.msdn.com/b/keithmg/archive/2009/01/06/exchange-topology-discovery-failed-error-0x80040a02-dsc-e-no-suitable-cdc.aspx  but I have a problem. Permissions were not the fix. When I enable IPv6 outgoing mail stop immediately and the mail troubleshooter
    says the server is not compatible with IPv6.
    Hi,
    According to your description,I'm very confused.
    What did you do when the mail get stuck?Open server manager on hub transport server or EMC ?
    What's your problem now? a mail flow issue or a permission issue?
    Please give us more details.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Droid Razr m since the update i can recieve messages but when i send it just says sending.

    please help

        Richie0604,
    Help is here! We'll get your text messages to start sending again. Which texting app are you using? The one that came on the phone itself or one that you downloaded?
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • I can log on icloud on pc but when i enter password on my ipad mini first gen with ios8 it tells me wrong password. and i can receive mail but cannot send any mail via icloud, gmail, yahoo never had to set this up with ios7. how do i resolve this?

    I updated my ipad mini first gen 32gig (4.3gig free) to run ios8 8.0(12A365) and i have a problem sending emails. i can receive mail but when i send it fails. my dropbox works fine, safari, and other apps work fine on the internet just the receiving of mail. Do i need to add a new outgoing server, though i dont remeber having to do this when i updated to ios7. how do i resolve this?

    Here's a troubleshooting article from Apple:  iOS: Troubleshooting Mail
    It doesn't seem to cover your specific issue, but have you tried using a different network (either a different wi-fi network, or switching from wi-fi to cellular or vice-versa if you have a wi-fi+cellular iPad)?
    For GMail, iCloud and Yahoo, copies of messages are stored on their respective servers, so you could try deleting the account on your iPad, then re-adding each account one at a time to see if that resolves the issue.

Maybe you are looking for

  • Problem in String cpmparison using #{} and ${}

    Hi, I am facing a strange problem. I want to compare values of the following 2 variables: {color:#0000ff}Variable 1 :{color} It is a variable for a dataTable. I take data from the dataBase in postDataModel. Variable named "post" is used to iterate ov

  • WebLogic Portal 9.2 MP1 Autonomy BEACMRepoFetch issue

    Hi, I would like to ask you a favor to look into my issue and respond if you have found a way to fix it. BEACMRepoFetch was not indexing the BEA CM contents with the default portal domain. I went through the documentation and found out that the "Sear

  • Compiler bug in 10.1.3 EA1?  get "Internal compilation error" with EnumSet

    The code sample below generates "Error: Internal compilation error, terminated with a fatal exception" when doing make. It's a very simple example, it creates an EnumSet with one element and dumps it via the "toString()" method. If I change the line:

  • Adobe-Edge content not displayed in iframes on Internet Explorer 9

    Hi all, I'm having trouble to see my content, generated w/ Adobe Edge, on Internet Explorer 9, when I'm embedding via iframes. Here's an example: http://n-land.de/bilder/bilder.html Did anybody experience the same problem, yet? Cheers, Chris

  • Folder Extended Properties (EWS+Outlook)

    What Im trying to achive is to be able to create a Folder with Extended Properties using EWS and then be able to read these properties from inside Outlook. Ive verified that it works to add & retrieve extended properties on Folders using EWS, i.e.