Can register workflow but not create workflow
I registered workflow manager with my site and status in
Workflow Service Application Proxy is "connected"
but when I open my site with SharePoint designer 2013 and will create site workflow, it show message like workflow platform don't configured.
Do anybody have way to fix it?
Thank u :)
Hi sasimasTHA,
Do you want to configure workflow for SharePoint 2013 with SharePoint Designer 2013 ?
You should make sure the followings that you have done:
1、 Installing and configuring workflow for SharePoint Server 2013
2、 Installing Windows Azure Workflow certificates in SharePoint Server 2013
If the error still exists, you can try to do as the followings:
1、 Open the CA, and click Backup and Restore
2、 Click Perform a back under Farm Backup and Restore
3、 Select the Workflow Service application with proxies, select Full backup type, then start backup
4、 Click Application Management on the left Quick Lunch, click Manage service application
5、 On the Manage Service Application page, click the row that contains the Workflow Service application, the ribbon becomes available
6、 On the ribbon, click delete
7、 After the above, you can run commandlet Register-SPWorkflowService -SPSite <SPSitePipeBind> -WorkflowHostUri <string> -AllowOAuthHttp by using PowerShell
Here are some links blow that could help you:
Installing and configuring workflow for SharePoint 2013
https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/create-sharepoint-2013-workflow-loop-by-using-sharepoint-2013-designer-preview.aspx
http://lennytech.wordpress.com/2013/06/02/configuring-sharepoint-2013-to-use-workflow-manager-1-0/
The commandlet
http://technet.microsoft.com/en-us/library/jj663115.aspx
please let us know if your problem still exists.
Thanks
Similar Messages
-
Acrobat 9 can use templates, but not create them?
I haven't reached into the template use area for some time. We used to create pdf templates in Acrobat 5 to spawn new pages. I don't see anyway to create a template in Acrobat (AcroForm) Version 9. However, version 9 still recognizes the spawn function. I assume Adobe wants us to use LiveCycle to design forms with this ability. Our customer specifies AcroForm files. Must we revert to V5 to do this? Or, am I just not finding the tool?
Forms > Edit Form in Acrobat
Forms > Page Templates -
How to creat commitment for PO PR but not creat statistical cost for GR
Hi,
Quantities and Values in Valuated Project Stock: Example - Material - SAP Library
Planning
Material FIN-M is assigned to network activity V10 and is managed in the project stock for WBS element P/4711.1.
The network type is flagged as appended and apportioned to the WBS.
Before the first MRP planning run or before the planned orders are converted into purchase requisitions or production orders, the following amounts appear in WBS element P/4711.1:
Planned costs of $500,00
Remaining order plan value of $300,00
The MRP controller begins by converting the planned orders. First, the planned order for the material RAW-M is converted into a purchase requisition and the planned order for the material SEMI-M is converted into production order A2.The order type is flagged as not appended and apportioned to the WBS.The remaining order plan value in the WBS element changes by the amount of the internal activities portion of production order A2 to $400,00 (300,00 + 100,00).After the purchase requisition is converted into a purchase order, a cost commitment of $50,00 also appears in WBS element P/4711.1.
External Procurement
Valuated goods are received for the purchase order, but the price is $10 different at $60. Assuming that material RAW-M is price-controlled, this gives rise to a debit posting of $60,00 in the stock account and credit posting of $60 in the GR/IR clearing account (Financial Accounting).If the inventory accounts was created as a cost element in CO, the following appear in WBS element P/4711.1:
Statistical actual costs of $60,00 in the stock cost element
A cost commitment of $0,00
If material RAW-M is price-controlled the standard price is $50,00, the postings in Financial Accounting are: $50,00 debit to a stock account $10,00 debit to a price difference $60,00 credit to the GR/IR clearing account
In this case, the only figure in the WBS element would be statistical actual costs of $50,00.
Above excerpt from SAP help, may I know how to do configuration to creat commitment for PO PR but not creat statistical cost for GR?
Thanks and regards,
RayHello Jie,
if i right assuming your query then PR->PO= Commitment should be created.
but GRN by MIGO=Statistical cost should not create once MIGO if right then actual cost would be 0.
you can activate commitment by OKKP transaction.
And you want to cost should not be statistical after MIGO right?
here solution is cost never statistical type until account assignment object not statistical type this is my assumption.
if this is the issue then check G/L account from the PO. then check that G/L account, whether it is a B/S account or P&L account? I think you have wrongly assigned P&L account.
Regards,
Sanjeev -
Contact can be edited but not deleted
Hi there,
New poster here and I wanted to share something peculiar about my new kin twom. I seem to have one contact that can be edited but not deleted. When I click the contact, all I get at the top are "favorite" and "edit" buttons. However, all my other contacts seem to have an "edit" button on top as well as a "more" button that, when clicked, gives you the option to "delete", "link", or make the contact a "favorite".
I can live with this non-deletable contact but I'm very curious as to how/why this happened. Anyone have any ideas?fisharefriends wrote:
It looks like this is your own contact card, and it may have been accidentally edited. By default, the phone creates a contact card for yourself, and it should have your own name and number in there. You can't delete your own contact
Not sure what the original contact was but I guess it's possible that it was my own contact card. I did not know that the phone creates one for you. What name does the phone assign to this contact? -
My trackpad is responding the click on finder, i can use multitouch but not leftclick/1 click/touch. Aswell when i go to the findertab at the bottom with the mouse, app icons Does Not expand. I had no problems with it before, but I'm very confused.
Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd -
I just traded in my iPhone 4S for Samsung Galaxy 4S, still have iPad. Some of my iPhone contacts are unable to send me a txt that I can receive. But NOT all of my iPhone contacts. I have had them change their settings for my ph number to NOT say iPhone. Txt msg is disabled on iPad. I have no idea what to do. I called the support line that I Pay $9.99 a month for. They told me to delete my iTunes account. Will I lose all my pics on my ipad? I have no music download. I'm getting ****** at this whole thing. And it allllllll started with apples update to the ios7.... I HATED IT. Help.
What your iPhone using friends label your phone number in their contacts is irrelevant. I don't know who you pay $9.99 a month to but it's not Apple. You can't disable text messaging on your iPad as it is not capable of SMS.
Do you still have the iPhone? If so, log out of iMessage on the iPhone.
Try this:
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on "Edit Products"
Click on the "X" to the right of the product.
Click "Unregister"
Also, try changing the password on your iTunes account. -
Missing Pictures.
Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing?
When I set up my desktop, I can find some of the pictures. Where do They hide, and what shall I do.
Have made back up, but unfortunately a little too late. What to do?
MacBook Pro 15 "late 2008, Processor 2.53 Ghz Intel Core 2 Duo, Graphics NVIDIA GeForce 9400M 256 MB, Software Mac OS X 10.7.4 Lion (11E53).1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now? -
How do I delete an e.mail on my 5s iphone that has a mime attachement? the e.mail can be read but not deleted. A message comes up saying that it cannot be moved! The e.mail was sent to me and I forwarded it. The e.mail is not in any other folder in the phone or on my mac. But it might be in my backup to the mac via itunes.
This is for your protection, its not supposed to be easy.
You should be keeping a record of all your passwords, security answers, etc.
Rescue email address and how to reset Apple id sec. questions.
http://support.apple.com/kb/HT5312?viewlocale=en_US&locale=en_US
If that doesn't work and you can verify the following info, call 1-800-APL-CARE.
1. apple id username, that is not locked or disabled.
2. serial number of an apple product registerd in your name
3. Billing info associated with your account -
I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
NarminI am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications. -
After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?
My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite. -
I can access Google, but not Gmail.
Hi guys. I've been having trouble with my internet connection for as long as I've had my Mac (one year). For the longest time, I've repeatedly had to click the icon for Airport and then turn it off and back on again to recover my connection to Google Gmail and Google docs. These are the first sites to disappear, later I have trouble accessing other sites, this is corrected by turing off and then on Airport. But that is very frustrating, and I often have to do it over and over again. Also, I'm puzzled by the fact that my Skype connection is rarely bothered when access to others sites drops.
I've been reading as much as I can find and trying the airport utility. Clearly I am stupid because things went from bad to worse. Now I can access Google, but not Gmail. I can access most parts of Apple.com, but when I tried to purchase the upgrade to OS 10.6, I couldn't view the page images. I found the same problem on a few other sites. When I tried to access Linkedin, I could get to the login page, but no further.
In each case, I get the usual message: Safari can’t open the page “https://www.google.com/accounts/ServiceLogin?service=mail&passive=true&rm=false& continue=http%3A%2F%2Fmail.google.com%2Fmail%2F%3Fhl%3Den%26tab%3Dwm%26ui%3Dhtml %26zy%3Dl&bsv=1eic6yu9oa4y3&scc=1<mpl=default<mplcache=2&hl=en” because Safari can’t establish a secure connection to the server “www.google.com”.
I've tried resetting Airport back to the factory settings. Now all I get is the blinking yellow light - I'm not sure what that means.
I'm now connected via hardwire, but access is limited to very few sites, such as this one and Google. I can search google, but I can't access gmail. I can access everything on my windows computer through the same wired network.
Message was edited by: WhidbeyTomasI am having this same problem, but it's not related to parental controls. I have to keep turning the airport on and off as well. Here (http://www.mac-help.com/forums/showthread.php?t=9802) is a post I made over at mac-help.. still waiting for a reply.
What I've noticed is, the DNS is resolving correctly, but I cannot access certain sites. Regardless, I've tried Open DNS servers and still get the same result. It's not a specific browser. Certain sites go down in a few minutes after visiting them. Some go down faster than others. And others don't go down at all. Sites I've had problems with are Apple.com (to make this post I've had to turn the airport on and off continually), Gmail.com, Google.com, while Google.ca works fine.
A solution would be great.. -
I've set up email on my iPad (talktalk.net) and can send and receive mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this?
I've set up email on my iPad (talktalk.net) and can send and receive mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this?
-
I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!
To diagnose problems with Thunderbird, try the following:
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates. -
On a new mail message in Yosemite there is no Send button or icon. Only a grayed out word that says "send. I can receive mail but not send because nothing at top of email allows sending. Please help. This is true of two .me accounts I have.
Hi,
It may pay to send a Screen Shot of the Connection Doctor info. (see the Window Menu)
It would seem the IMAP or POP side is logged in bit the out going STMP server is not.
8:27 pm Monday; December 22, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
How do I save a scan file in OS X Maverick? The file can be saved, but not readable.
How do I save a scan file in OS X Maverick properly? The file can be saved, but not readable.
I've never had a problem with that. What does the error message say when you try to open it?
-
I just upgraded to Lion today and realized I'm not receiving any mail. I can send out but not receive. I am using a POP server Road Runner acct. Any help would be appreciated.
Try Mail->Window->Connection Doctor. If there is a problem reported, try:
Open Mail->Preferences and check your settings.
If you still have a problem, Copy your settings (screen capture ⇧⌘4), delete account, and re-setup account
Maybe you are looking for
-
IOS 8.1.2 Location Services constantly being used
There is a bug with 8.1.2 and I am not sure where to report it. Location services is constantly in use. The System Services settings I disabled were apparently reenabled with the iOS 8.1.2 update and this is killing the battery on my iPad 3. I have
-
1st generation ipod won't play music
I have a first generation iPod that I have never really used before, but would like to use now. I downloaded iTunes 11 to see if it will work. iTunes recognizes the device and allows me to set certain options. It also has several times said that it
-
Split valuation for non-valuated materials
Hi dudes, We are implementing SAP for our Subcontractor. our SC receive all components from our company ( on free ) but sometimes they purchase the same material themselves for other uses. so we decided to use split valuation to separate valuated an
-
My iPod touch has no volume I can't hear anything on it. On pandora you can't hear anything. I've reset it and nothing happened. Do I have to upload it to iOS 6.1.5. Will it do better. I dont know what happend to it help ASAP
-
Problems in inserting in jtable
hi, I am using a jtable in my application. values are set through a table model. i am using renderers and editors. Rows can be added to the table using an insert button which i have provided. It inserts a new row through TableModel.insertNewRow(); Th