Can reinstall uuid after perl update to 5.16

hello, guys
i using pacmanager instead of putty, pacmanger depent on perl's modules. after i update whole the system, opened pacmanger fail, so i have to reinstall pacmanger, but when i reinstalled uuid, it response the error like this:
http://aur.archlinux.org/packages.php?ID=30173
btw: complie uuid from source ,it success to build only one,but other error same as above.

[root@exorzist /]# pacman -S core/perl
warning: perl: local (5.10.0-2) is newer than core (5.8.8-9)
warning: perl-5.10.0-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: irssi: requires perl>=5.10.0-1
:: perl-dbi: requires perl>=5.10.0
:: perl-io-socket-ssl: requires perl>=5.10.0
:: perl-locale-gettext: requires perl>=5.10.0
:: perl-net-ssleay: requires perl>=5.10.0
:: perl-xml-simple: requires perl>=5.10.0
:: perlxml: requires perl>=5.10.0
:: sdl_perl: requires perl>=5.10.0
what should i do?

Similar Messages

Can't email after security update last 48 hours

can't email after security update?
help I

See possible fixes here.
https://discussions.apple.com/message/19760703#19760703
https://discussions.apple.com/thread/4311280?tstart=0
https://discussions.apple.com/message/19710911#19710911
Some have reported success simply by reinstalling the update.
http://support.apple.com/kb/DL1586
Or download and apply, or reapply, the 10.6.8 Combo update first, then apply the Security Update again.
http://support.apple.com/kb/DL1399
I'd suggest starting with the simplest of these fixes, so look them over first.

Can't export after system update

Hi, i just did the system update thing in the software update,
and now i can't export...
im on a dual 2ghz powerpc G5 and im running final cut pro 5.1.4
haven't had any problems untill now,
just did the update and now if i try to export i get "codec error" or " general error"
if i try to use compressor it doesn't even start compressing, just says it's finished and then i can't play the movie,
When i tryed to do export quicktime movie final cut crashes...
any ideas on how to fix this ??

Here's the thing. All sorts of things go get funky when you change OS or applications. Although it doesn't help you at the moment, here's the best way to work. When you have a stable OS/Application combo, clone your startup drive. You can use an application like CarbonCopy Cloner (available at versiontracker.com). If you clone to a second internal drive, you can be back at work in a matter of moments.
You need to add your hardware specs to your profile to help us help you. Are you using any kind of capture card in your make like an aja io? You might need to update your drivers.
As far as your current state, here are a few things to try:
Repair permissions (recommended before and after any software or OS update or install).
Have you actually shut down after the update? A shutdown (leave the computer off for 15 minutes - that means unplugged) and restart will sometimes fix things.
Do a reinstall of quicktime. Do a search here for the techniques.
But, I'm wondering if you might have another problem that was not caused by the update. These things do happen.
You may have a problematic clip or render that finally made your sequence unusable. Do you have any graphic files in your sequence? Are they CMYK? If so, delete them. FCP doesn't play nice with CMYK graphics.
What format are you working in? Try the following: Capture some new material, edit into a timeline with matching settings and then try an export. Any luck? If so, take a look at your problem sequence. Mark an in at the beginning and an out at the halfway point. Do an export. Does it work? If so, Try exporting the second half.
You might also try copying the contents of your sequence into a new sequence.
Just thought of something else you might try that has worked for me with a problem sequence. Select the sequence in the browser or make the timeline active. Hit command-zero (sequence settings). Change the codec to animation. Hit OK. Among other things, this will cause your sequence to become unrendered. It also can sometimes slap fcp on the side of the head and fix a problematic sequence. Now, Do the same thing again and change the codec back to it's original setting.
I know there's a bunch of stuff here and I've been rambling on, but it's not easy to diagnose these things from a distance.
Good luck

Can't boot after installing updates

I am quite new apple and this is my first problem I have encountered.
I downloaded updates and now my computer wont boot. I have tried safeboot and it just freezes on the 'starting OSX bar'. I have inserted 'install disk 1' (which is OSX 10.4.6) and gone through disk utilities to repair permissions and the disk - then starting from the hard drive in safeboot and it still gets no further than the 'starting OSX bar'.
If I chosse to boot from the install disk will it take me to the 'erase and intall' option.
What should I do? If anyone can help I would be very grateful.
Thankyou

I guess you could skip the steps you have done already...
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD...
http://docs.info.apple.com/article.html?artnum=107120

Macbook Pro, Can't boot after EFI update....

Updated the EFI this morning- Prior to that update, everything was working fine. After the update, I have the flashing question mark folder of doom. Can't use internet recovery even while plugged into ethernet. What happened? Everything was going so well Apple! I'm on Lion, latest updates, 2011 MBP 2.2 i7, SSD 120g with a 750g running beside it (data doubler).

Okay, so the disk is supposed to show up as disk0s2.
Remember how I'm unable to unmount the drive? I force unmounted it and then used Disk Utility to repair the volume, but still no luck.
I think the key to the problem is this new HD I put in runs at 3 Gbps. I think I read somewhere that the new MacBook Pro's don't support that.
I think next I'm going to try swapping out the new HD in my MacBook Pro with the one it originally came with.

IPhone 3GS can't connect after software update

My iPhone 3GS can't connect to my M1424WR anymore after I updated my iPhone software. Apple suggested I update my router software - any tips?

Try use "forget this network" then re enter the wep/wpa key (network password) this happens sometimes with my iTouch.
Other than that, there is no reason the iPhone cannot connect. =/

Can't boot after system update: unknown filesystem type

After running a system update, including updating the kernel, I can't boot to the new kernel.
On booting, grub loads the kernel image, runs/loads udev, but then fails to mount the root partition with error:
mount: unknown filesystem type 'ext4'
I have tried reinstalling the 'linux' package via packman several times, also trying the --recursive argument to make sure all my dependencies were there, and after days of googling and tweaking my system, I'm at a loss.
Thank goodness I happened to keep a spare kernel laying around in /boot.
Thanks in advance.
Last edited by jackrabbit (2012-03-22 23:25:28)

The OP can read their partition initially though, it's only after udev that they can't.
Also, try adding "rootfstype=ext4" to your grub kernel line. Is your /boot on a separate partition or part of your / partition?

Can't Print after Software Update

After completing an Apple software update which included Epson printer software update 2.7 I am unable to print. I get an error message; Error:/Library/Printers/EPSON/InkjetPrinter2Filter/rastertoescpll.app/Contents/ MacOS/rasertoescpll failed. Can you please assist? Printer is Epson RX 650

I had this problem with the RX640; it seems to affect a lot of Espon printers going back a long time, not just the latest update. Apparently some resourceful person out there says it is due to trying to print a pdf generated from word and various other programs and getting rid of this many-headed beast of a problem can be quite tricky.
I first followed this http://kb.epson-europe.com/display/4n/kb/article.aspx?aid=3744&searchstring=&n=& tab=search&bt=4n&s= epson knowledge base article's instructions but had no joy. I then reinstalled Rosetta off my Snow Leopard install disk (which as an aside involved fixing my broken dvd drive!) and again had no joy, even after wiping the print settings, running the gutenprint uninstaller, deleting the drivers and trying to install the printer again using software updater. It seems like Epson software update 2.7 http://support.apple.com/kb/DL1398 on the Apple website does not work properly for selected Epson printers.
To the solution. I downloaded and installed the previous Epson software update http://support.apple.com/kb/DL900 from the apple website and this finally did the trick. This is a beast of a file at 850MB compressed, containing drivers for ALL of Epson's printers so it does eat up some drive space. However as my printer is working again, I don't care!
FYI I have read various solutions that were successful for various people. I am not certain if the last step alone would have been sufficient to get my printer working or if the previous Epson KB steps and Rosetta reinstall played a part. I hope this issue is resolved in Lion in a few weeks time altho given Epson's past history, I'm not very confident.....

LILO can't boot after recent update

After updating today, I cannot boot any longer. My root is on lvm and I also use LILO.
I've tried the suggestions to boot from live cd and run mkinitcpio without any success. I've also tried reinstalling udev and mkinitcpio with pacman from a live cd and that did not work either.
When I boot, I see the following messages:
:: Running hook [udev]
:: Triggering uevents...done
:: Running Hook [lvm2]
Activating logical volumes...
2 logical volume(s) in volume group "vg1" now active
Creating device node with major 254 and minor 3.
:: mounting '/dev/root' on real root
mount: you must specify the filesystem type
You are being dropped into an emergency shell
sh: can't access tty: job control turned off
[edit] changed title to reflect what I discovered to be the underlying problem: LILO
Last edited by despotic (2012-05-07 02:42:31)

Yes, I can manually mount the lvm partitions in the recovery shell.
Here is my lilo.conf: http://pastebin.com/w0L1kgqv
Here is my fstab: http://pastebin.com/eyvfnYpC
Also, when i try to update udev or linux or device-mapper with pacman, I get the following warnings:
warning: could not get filesystem information for /bootmnt: No such file or directory
warning: could not get filesystem information for /cowspace: No such file or directory
warning: could not get filesystem information for /sfs/root-image: No such file or directory
warning: could not get filesystem information for /sfs/lib-modules: No such file or directory
warning: could not get filesystem information for /sfs/usr-share: No such file or directory
warning: could not get filesystem information for /repo/core/x86_64: No such file or directory
warning: could not get filesystem information for /repo/core/any: No such file or directory
warning: could not get filesystem information for /bootmnt: No such file or directory
Thanks for your help!
[edit] for anyone looking at this post trying to resolve the above warnings, don't. They don't seem to cause problems and as far as I know they show only during a chroot environment within a live boot, so don't worry about them. If you experience issues, it's most likely related to something else, my particular issue was actually with the LILO boot loader and not related to these warnings at all.
Last edited by despotic (2012-05-07 02:33:05)

Help, can't overclock after bios update!

On the stock k9n2 750a bios version, my AMD 5400 OC’ed to a stable 3.08ghz without any hassle by simply setting the FSB to 220mhz . Recently, I flashed to the AMI 7374 v3.5 bios and couldn’t even post after bumping the FSB to 202mhz (it’s fine @200mhz). So, I reverted the bios back to AMI 7374 v3.1 and for some reason it now can’t post either after saving a FSB above 200mhz . As far as I can remember, I’m using the same settings as I used when I got the stable 220mhz FSB.
Anyone know what the bios update did to kill my overclocking or got some ideas/advice on how to get back to the stable 220mhz FSB? Thanks.

Quote from: JLio01 on 29-January-15, 13:54:12
What does ME version show under BIOS currently? When you check the ratio under OS, do you put your system under loading? And did you re-install driver from website after updating BIOS?
http://www.msi.com/support/mb/Z68AGD65_G3.html#support_download
ME version 8.1.2.1318. Even if I put the system at 100% load in Windows, the processor never moves past 3.4 GHz. I've checked this in multiple programs (CPUZ, RealTemp, TMonitor, etc.) And yes, I reinstalled the drivers that were listed under the BIOS update.
Quote from: TZBC on 29-January-15, 14:17:52
Go to OC section and change to advanced mode, change your CPU Ratio Mode from Dynamic to Fixed mode.
And go to windows checking the ratio have changed or not.
EDIT: sorry, I forgot this motherboard doesn't have this settings, try Disabled or Enable "Adjust CPU Ratio in OS"
I've tried changing that setting (Adjust CPU Ratio in OS) but it doesn't seem to have any effect.
However, I just noticed that I didn't have the newest version of CPUZ. I updated it and now it shows more detailed information for the multiplier: x34 (16-44)
So it is detecting that I have set it to 44 in Windows after all. But it seems to be indicating that it's using a dynamic CPU ratio of 16-44 - which I don't want, I want it fixed at 44 - but as you say, there's no option for dynamic/fixed on my motherboard. However, on the old v23.7 BIOS, if I set it to 44 it stayed at 44 always.
Even if it's using a dynamic ratio for some reason, it's not doing that right either because it's still never moving past 3.4 GHz (nor is it ever dropping below 3.4 GHz).

Can't boot after system update - INIT: No inittab file found

Hi i've a pc where i installed arch linux more than one year ago
Its a:
PentiumII 400mhz
192mb ram
2 harddrives (don't know if i use them as a lvm or if each consists of 2 partitions used as mountpoints)
graphic card nvidia TNT2
i wanted to update it using "pacman -Syu" but it didnt worked because TNT2 needed nvidia legacy treiber 71xx don't work with kernel > 2.6.26
so i removed currently used nvidia treiber with pacman and installed the xf86-nv driver using pacman...
after that i think i updated just the kernel (pacman -S kernel26)
and than the system (pacman -Syu)
that was successfully....but after my reboot the shock
INIT: No inittab file found
Enter runlevel:
doesnt matter what runlevel i try i can't get further
what should i do now? please help me and provide me something like a step by step guide

menhir wrote:
what kind of live cd should i use?
is there a arch live cd that has the initscripts package include that i don't require to have my wlan working?
where can i find a good tutorial for "chroot" rescue in my case?
Just use the Arch installation disc

MOVED: Z68A-GD65 (G3) - can't overclock after BIOS update

This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=252819.0

Quote from: JLio01 on 29-January-15, 13:54:12
What does ME version show under BIOS currently? When you check the ratio under OS, do you put your system under loading? And did you re-install driver from website after updating BIOS?
http://www.msi.com/support/mb/Z68AGD65_G3.html#support_download
ME version 8.1.2.1318. Even if I put the system at 100% load in Windows, the processor never moves past 3.4 GHz. I've checked this in multiple programs (CPUZ, RealTemp, TMonitor, etc.) And yes, I reinstalled the drivers that were listed under the BIOS update.
Quote from: TZBC on 29-January-15, 14:17:52
Go to OC section and change to advanced mode, change your CPU Ratio Mode from Dynamic to Fixed mode.
And go to windows checking the ratio have changed or not.
EDIT: sorry, I forgot this motherboard doesn't have this settings, try Disabled or Enable "Adjust CPU Ratio in OS"
I've tried changing that setting (Adjust CPU Ratio in OS) but it doesn't seem to have any effect.
However, I just noticed that I didn't have the newest version of CPUZ. I updated it and now it shows more detailed information for the multiplier: x34 (16-44)
So it is detecting that I have set it to 44 in Windows after all. But it seems to be indicating that it's using a dynamic CPU ratio of 16-44 - which I don't want, I want it fixed at 44 - but as you say, there's no option for dynamic/fixed on my motherboard. However, on the old v23.7 BIOS, if I set it to 44 it stayed at 44 always.
Even if it's using a dynamic ratio for some reason, it's not doing that right either because it's still never moving past 3.4 GHz (nor is it ever dropping below 3.4 GHz).

Reinstall itunes after failed update

Installed latest iTunes update. Got same error message as everyone else. Uninstalled iTunes. Now cannot successfully reinstall iTunes. Says I don't have the administrative rights. I am an/the administrator. Restarted computer. Tried 4 times. Just want to backup my devices and get things working again. Can anyone help?

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

IPod can't connect after last update

I tried to update my ipod to the newest software (8.02 or whatever), but after I finished downloading the update, it told me I couldn't install the software for some reason. Now, my ipod seems blank, as it only shows me the USB cable pointing to the itunes logo, and when I connect it to my computer, my computer detects only a USB device, but cannot find a driver for it. And it doesn't show up in my itunes or My Computer.
I updated my itunes to the newest version. What should I do?

I'm having the same exact problem since I attempted to upgrade and I'm about to pull my freakin' hair out!! I"ve been trying everything I can find and iTunes continues to tell me that it "detected an Ipod in recovery mode. You must restore this Ipod before it can be used with iTunes" Well, I've restored it several times, same thing. I've also went through 4 of the 5 R's with the exception of uninstalling iTunes. I have close to 20,000 songs on an external hard drive and if I uninstall, it's going to go through every one of them, uugghh!! Last resort choice only! Anybody else figure something out??

Can't print after Tiger update

I updated from Panther to Tiger 10.4 today,and then did an update to 10.4.6.
Now I can't print. Tried "Save to PDF" from the File>Print menu. Nothing. Tried clicking on the "print" button. Nothing.
The Apple knowledge base only says something about deleting a Xerox plugin, which I didn't have, so I couldn't do that.
Anyone know what's going on? Thanks!

Not unusual to have this problem if you had printers installed before upgrading. Open the Printer Setup app and select "Reset Printing System" from the File menu. Then reinstall your printers. If still no joy, you might want to check your printer's mfgr's website for new (10.4) drivers.

Can reinstall uuid after perl update to 5.16

Similar Messages

Maybe you are looking for