Can RH8 be installed by the admin using his own account?
Please excuse this basic yes/no question, I could not find any info about RH8. In older releases it was once recommended to install RoboHelp using the account of the USER who would later use the program (not the admin). For this, admin rights had to be assigned to the user during installation and removed again afterwards.
Is this procedure still required for RH8 or can RoboHelp now be installed by the admin using his own account?
The options are the user account with admin rights attached or the admin account that will have those rights by default.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Similar Messages
-
1) iPad force closes often when I get to support page
2) guy who installed apps on iPad used his own iTunes account. Is therea way for me to update using my own account? I've tried deleting and reinstalling but I end up paying 2x for the same apps :(
3) I also know I installed some apps on my own account but when I try to update them, the installer guy,s apple I'd comes out. Is there A way to change that?
Thanks for helping out a newbie non- techie :))1) iPad force closes often when I get to support page
Can't help you with that.
2) guy who installed apps on iPad used his own iTunes account. Is therea way for me to update using my own account? I've tried deleting and reinstalling but I end up paying 2x for the same apps
Who does this iPad belong to? If someone else used their account then they paid for the apps. You will need to buy and pay for apps using your own account which means that you will no longer have access to the apps installed by the other person.
3) I also know I installed some apps on my own account but when I try to update them, the installer guy,s apple I'd comes out. Is there A way to change that?
If this iPad belongs to you I suggest you reset the iPad to factory defauts and just use it with the apps that you've paid for. You will be able to re-download the apps from the iTunes app store after the reset.
Follow this guide to reset the iPad to factory settings.
http://ipad.about.com/od/iPad_Guide/ss/How-To-Restore-An-iPad-To-Factory-Default .htm -
My question is, when I bought my sons ipod I created the account with my emai, then I purchased an ipod as well, so we share an account. I want him off of my account. How do you do that, he has his own computer.
His own password for what? You can only have one password for one account.
He can use your account for items and he can also use his own account. To purchase items with a different account you go to Settings>Store and sign out and sign into the other account.
To update apps you have to sign into the account the purchased them. -
ITunes Can't Be Installed Nor The Components Can't Be Uninstalled
iTunes Can't Be Installed Nor The Components Can't Be Uninstalled
I was trying to update my iTunes to the latest when I accidentally plugged off the computer. I switched on the computer back to check the iTunes, it says to re-install the iTunes whenever I click it, so I tried re-installing it (Both iTunes and Quicktime), but I'm having a hard time, it says (click the screenshot I made) all the time:
http://www.flickr.com/photos/62071999@N07/8366121669/in/photostream
Whenever I click retry, it doesn't do anything, so I had no choice but to cancel it.
http://www.flickr.com/photos/62071999@N07/8367188546/in/photostream
This suddenly appears when I click cancel.
http://www.flickr.com/photos/62071999@N07/8367188554/in/photostream
Was interrupted.
I saw alot of cases like this and had a successful ending, I tried what everyone is saying, but neither of it didn't work.
I tried repairing the Apple Mobile Device Support, here's what it says:
http://www.flickr.com/photos/62071999@N07/8367188486/in/photostream
http://www.flickr.com/photos/62071999@N07/8367188344/in/photostream
I uninstall it using the control panel but didn't work, instead I use the Ccleaner to fix the registry (I can't really see any files that are related to apple) and to uninstall it and it did was removed from the list but the files are still there.
I read in http://support.apple.com/kb/HT1923 that all programs should be uninstalled.
1. iTunes
2. QuickTime
3. Apple Software Update (Successfully Uninstalled)
4. Apple Mobile Device Support (Successfully Uninstalled but the files can't be removed)
5. Bonjour (Successfully Uninstalled but the files can't be removed)
6. Apple Application Support (iTunes 9 or later)
I already did uninstall listed above, but I still see their folders on my computer/program files. Whenever I try to delete it. it says:
http://www.flickr.com/photos/62071999@N07/8366121503/in/photostream
Bonjour (I opened all task manager's tab, never did saw any sign of these files, like it's plugin and so on)
http://www.flickr.com/photos/62071999@N07/8366121411/in/photostream
Apple Application Support (Which only contains Appleversions.dll)
Please help! I don't even know what to do unless I'll reformat my computer but I don't want to do that, I tried lots of things for my iTunes to work, none of them seemed to help me. I can't use my iPhone / iPad / iPod with musics and videos, it's just so boring without entertainment.
(Step-By-Step)
Thanks in advance!I had the same problem this weekend. The iphone 4s needed Itunes10.5 to sync to her Asus Windows 7 Laptop. When I tried to download from the Apple website I got the error that the windows installer was missings files or something like that. I uninstalled itunes and tried again but that didn't work. Then I redownloaded itunes 10.3 just to have a working version in case I gave up. Then I found site that suggested I update Windows by going through the start menu and while doing that I found an update Apple itunes file.
Goto Start and type Widows Update in the seach window. Click on check for updates (I already was current with all updates but I suggest you download the updates if there are some available.
Goto start and this time just type update in the search window. Look for the Apple itunes update link and click on it. It found there were updates for itunes 10.5, Quick time, Safari, and Icloud. I checked all the updates except for Safari, since we don't use it (yet).
The install started then seemed to stall at one spot for ~3min but then completed successfully. I open itunes and had her synced with Outlook Contact, Email, Calender, and Notes in 5 minutes. I did already configure Outlook by going to tools and Trust Center.
I hope this works. -
OS X and Windows on MacBook Pro. Can I clean install only the OS X?
I have both OS X and Windows on my MacBook Pro. The OS X has been ridiculously slow and freezes up most of the time, especially when I use Office. The Windows partition has been working perfectly. Can I clean install just the OS X part of my computer? How would I go about doing that? I want to leave the Windows partition alone.
Thanks!!Hopefully this will work:
Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button. -
Ran into an issue installing the W10 TP today; currently using a laptop who's manufacturer load up windows 8.1 using WIMBoot to save space on the SSD.
Because of WIMBoot, the W10 installer detects that "Windows can't be installed because this PC uses a compressed operating system."
This means that, short of redoing my Windows Install from scratch, I have no way to install the W10 TP, either through the ISO or through Windows Update.
Any chance that this will possible in a future build?Wimboot needs an image file, that HP uses with Windows8.1 + Bing on
Stream 7 tablet & HP stream laptops11.6" & 13.3"
Hp turned windows 8.1 into image file for using 32gb sd storage
windows 10 until finalised will not be an image file
bye retired techie
This is quite unhelpful, as I am in the same boat on an HP Stream 11, and many others are in this boat as well
According to the System Requirements page for the latest technical preview, Windows 10 is unsupported on
all 16GB WIMBoot devices, but only incompatible on
some 32GB WIMBoot devices, thus seeming to imply that some WIMBoot devices are indeed compatible.
The question is, why are some WIMBoot devices upgrade compatible while others are not? And is it possible to work around this limitation while retaining the WIMBoot configuration and user data, as an option for advanced users?
Furthermore, Windows 10is an image file (install.wim is what's used to install, refresh, and restore Windows). WIMBoot devices, from my understanding, use the install.wim (which currently contain the Windows 8.1 OS) in
a read-only mode, only applying updates and changes as files on the C: drive (so any updated files are located on C: and the originals within install.wim ignored?). Problem is, there has yet to be any explanation from Microsoft, for OEMs or consumers,
on how WIMBoot devices are to be upgraded in the future, as WIMBoot was only introduced with Windows 8.1, and so there hasn't been any major consumer releases of Windows that these devices would upgrade to. -
I just bought the new OS X 10.8 and downloaded but when I tried to install it on my computer Installation Failed and I got this message:
"OS X can't be installed on the disk Macintosh HD , because a recovery system can't be created."
I tried so many times but the same message comes out to me each time and when I restart the computer I am back to the same OS X installer and can't access my computer any more so I am really stuck I can't install the new OS X version and can't go back to the old OS X version or access my computer.
Please help
My computer is MacBook Pro 13"OK. You have a Boot Camp partition which is why the issue. See the following:
It seems the issue is that the space at the "bottom" of your available space when Lion installs it's partition is already occupied by BootCamp. The fix was to go into Disk Utility; Select your Hard Drive; Select Partition; Move the bottom of your main partition "up" a bit to create a space for Lion; close Disk Utility; Install Lion; once Lion is successfully installed, go back into Disk Partition and drag the bottom of your main partition back "down" to the bottom of the window.
In your case use Disk Utility to "shrink" your OS X partition a little more than 1 GB.
To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired empty space. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.
Remember that you only need to shrink the OS X partition a little more than 1 GB. Now, when you try the Mountain Lion installation the installer will be able to make the Recovery HD. -
I don't know of there is anyone than can fix this age old Apple problem. Does anyone know how to retrieve apps under an old Apple ID when the email used for that account no longer exists & I can't remember the password? After speaking with Apple Acct. Security, I got the security Q right but my birthday was wrong! They wanted the serial number from my phone that was 3 iPhones ago! Seriously??!!
Any updated way to work around this? No Apple people can correct it.
Thanks,
JoeYou need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986) -
Can you buy apps from the appstore using phone credit?
can you buy apps from the appstore using phone credit?
No. Phone credit is from your cellular carrier. App store purchase payments are made to Apple.
-
Gateways can't be restarted from the Admin Console
Hi,
We have two gateways and two servers setup. We have changed the names of the gateways after we completed the installation. everything works fine except that the gateways can't be restarted from the admin console. The administration guide says that this happens for one of two reasons. I have checked both and non of them applied. I am afraid that this is an indication of more serious issue. Any help ?never mind,
I found out that we had the old gateways names in ips.gateway.host inside /etc/opt/SUNWips/platform.conf on both gateways.
when i replaced the old name with the new one and restarted the gateways, i could restart them from the admin console
|<halid -
Error msg = pls. install/uninstall the product using setup.exe in the root folder
unable to install photoshop elements v10 on a windows 7, ultimate 64bit computer, get:
error msg = pls. install/uninstall the product using setup.exe in the root folderyes, I am installing as the administrator. I have tried to install from
two different folders;
1. c://adobe photoshop elements 10.msi
and
2. c://program files/adobe/adobe photoshop elements 10.msi
get the same error message from both locations.
the error message is not specific as to "root folder"
someone please help with this. I would like to be able to install this app. -
XCode can't be installed because the version of OS X is "too new"
I have Mountain Lion installed on both my iMac and my MacBook, and I'm trying to install XCode from the App Store. It installed on the MacBook without an issue, but when I try to install it on the iMac, I get an error that says "XCode can't be installed because the version of OS X is too new". Is there anything I can do about this? I'm running Mac OS X 10.8.0.
Thanks in advanceNever mind, solution found here https://discussions.apple.com/thread/4135803?tstart=0
-
wat if i have lost my iphone and the person delets my icloud ID and enters his own new one can i still look find the phone using Find my iphone using my earlier ID or will it not pick up my phone as he changed the Icloud ID which was associated to me ID
if someone deletes icloud or even if you wipe phone it is not traceable anymore.
-
My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..
So how do I create a separate I tunes on a PC which already has itunes... Or if not can I plug my iPad to the PC and use itunes on my iPad, and drag mp3s from a computer.
I'm not sure what the equivalent of a desktop is on the iPad.. And I don't actually know how to use the icloud either...
Can anyone start me off, given it have a iPad and use of a PC - not mine with existing iplayer
I do have spotify soundcloud so I could potentially use these.. If there is a route of getting either mp3's etc to end up on my iPad or iPod.
Kind RegardsiTunes 11
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device and follow the instructions. -
When I try to set up family sharing I get "This account is already shared by another family member. Family sharing works best if every family member uses their own account." how do I reset? I can't find who it is being shared by.
Hi jmeckoll1,
It sounds as if you are trying to set up family sharing starting with an Apple ID which someone has already used to start a family group. Presumably this person is within the family group you want to share with. One solution to this issue would be to ask to join this family group. See this article -
OS X Yosemite: Join a family
If this is not the desired result, you will need to set up your own family group using an unused Apple ID that is in use for iCloud. See this article -
OS X Yosemite: Set up Family Sharing
Thanks for using Apple Support Communities.
Best,
Brett L
Maybe you are looking for
-
Display HTML in Web DynPro Java View
Hi, I have a data in HTML code. It is a full HTML code with the body, head, html.... Now in my Web DynPro i have a section whereby it displayed the message that store in the database table. In that column store all the HTML code. So now in my Web Dyn
-
IPhone 4 Apps stop working after sync
Everytime I sync my I phone my downloaded apps will not open. I can correct this by downloading another App but that is a pain. I want to be able to sync my iPhone and not have my app stop working.
-
Hi I have a task to complete on LabVIEW and i was wondering if anyone is willing to create it for me as it's the only piece missing for my personal project. I am not familiar with LabVIEW and therefore, if anyone is interested, i can pay you through
-
can any one give me wat reference object(referece charecteristics/reference k.f)
-
DataGuard 10gr2 (10.2.0.4) AIX 5.2-primary Aix 6.1-Standby possible?
We currently have 10.2.0.4 DG configuration running on three AIX 5.2 servers (one primary, two standbys). We will be installing some new servers that will be pre-loaded with AIX 6.1. If we were to install 10.2.0.4 on these new AIX 6.1 servers is it p