Can ruby camping run on Leopard
Hi, I just installed camping using "sudo gem install camping". Although it showed that camping was successfully installed, camping can't run. the error message is:
/usr/lib/ruby/user-gems/gems/camping-1.5/bin/camping:8:in `require': no such file to load -- camping (LoadError)
from /usr/lib/ruby/user-gems/gems/camping-1.5/bin/camping:8
Previously I use macports to install, and no problem. But when I tried to use system's ruby, it doesn't work.
Can anyone offer me a solution?
Welcome!
The sources you found are correct--there is no way to make 10.6 work on a PowerPC processor. The system software for PPC machines are coded one way, that for Intel processors is another.
The 1.25Ghz iMacs can run 10.5 (Leopard), but no higher.
Due to unclear forum labeling, you've found the forums for the G4 Tower computers like the one pictured by my name at the left. Your iMac G4 rates its own forum here:
http://discussions.apple.com/category.jspa?categoryID=137
There are some really sharp iMac gurus there, so please bookmark that forum for future posts. You'll get help faster than way, particularly if a future question is hardware-specific.
If you have system software question about 10.5, it has a forum here:
http://discussions.apple.com/category.jspa?categoryID=235
Once you learn where the broken signposts point around here, you'll find lots of good stuff!
Allan
Similar Messages
-
Boot Camp on Snow Leopard can't install Windows-Stuck on black BIOS screen
I'm running Snow Leopard 10.6.8 on an early 2008 Mac Pro (dual 3.2Ghz Harperton CPU's, 10gb RAM) with Boot Camp version 3.0.4 (all updated). I've successfully had a Boot Camp partition in the past, running WindowsXP32 Bit. I just purchased Windows7 Professional and can't install either the 32bit or 64 bit version. Neither can I install any of my original Windows disc. Boot Camp successfully creates the partion, then asks me to install the Windows install DVD/CD which I do, and then when it reboots, it gets stuck in a black BIOS screen that says "Initializing..."
I've tried all my Windows discs: WindowsXP-32bit, Vista-32Bit, Vista-64Bit, Windows7-32Bit, Windows7-64Bit. Same problem...gets hung on the black BIOS screen. I disconnected all my USB hardware except for my keyboard/mouse. All my other internal drives are disconnected.
The only thing that I can think of is that is different is my MacHD is a 500GB Seagate MomentusXT solid state hybrid drive.
Any help is greatly appreciated!!!!!!!
ThanksHi fellow Mac buddie,
I just zapped the PRAM, and also reset the SMC switch on the mother board.....no luck.
In refenece to the hybrid SSD drive, I've already taken that one out, put in a fresh 3.5" drive, formatted and installed a fresh clean version of Lion OS, and then attempted the Boot Camp install using Lion with the newest Boot Camp version (3.1 or 3.2) Please see my original post above.
Same issue, black BIOS screen.
Also tried Boot Camp Windows install on a second drive in drive bay 2 (an option now in Lion's Boot Camp)
same issue, black BIOS screen.
Lastly, I've tried all these interations using my three different Windows install disks (XP, Vista, Windows7).
XP is a "full install" disk, Vista and Windows7 are upgrade disks. But I've had XP installed previously using Boot Camp with no problem. So I'm confused I can't even install XP.
As another option, I went to a friend who has a PC, and I installed Windows 7 on a new hard drive. I'm about to install that in drive bay 2, reboot while holding down "option", and see if I can boot directly into that disk.
That's a workaround, as is VMWare Fusion which I have and Windows7 works fine as a virtual machine.
But when something doesn't work the way it's supposed to (in this case Boot Camp), it bugs me makes me want to know why it doesn't. I'll report back with regard to the 2nd bay Windows7 hard drive install.
SPY500 -
Can I dual boot snow leopard and mountain lion if I've installed boot camp on my drive
Can I dual boot snow leopard and mountain lion if I've installed boot camp on my drive
Yes as I said before. If your model Mac came with Snow Leopard and you are now running Mt Lion and have Windows installed in a Boot Camp Partition all you have to do is make the Mt Lion partition smaller, take the free space and make it another Mac partition and you should be able to install Snow Leopard into that partition.
I have Snow Leopard, Lion and Mt Lion installed on my MBP. No Windows in a Boot Camp partition because I run Windows XP in a Virtual Machine on both Lion and Mt Lion. -
Is there any way to clone a machine using boot camp running WinXP. The Mac side is running Snow Leopard. I want to clone a newly set up machine on to a number of machines in a student lab. I am wanting to clone both particians
AFAIK, there's no app that'll clone the Mac and PC volumes so you can restore them. System Image Utility.app or Deploy Studio for Mac and Ghost for PC are needed. See these for starters:
http://clc.its.psu.edu/Labs/Mac/Resources/blastimageconfig/
http://blog.macadmincorner.com/
http://lists.apple.com/archives/System-imaging/ -
I running snow leopard on my MBP- where can I find the drivers for windows XP if I install them via bootcamp? Thanks!
You won't find them until you are in Windows.
Helps to read even print the guide.
If you have auto run enabled, which is a security risk, the Apple setup.exe will run.
Otherwise, just run that.
Either use your OS X DVD, or use the drivers downloaded by Boot Camp Assistant.
Two different ways to get them. -
I need to know which update(s) I can apply to help stabalize the system.
Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here. -
I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?
kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere? -
I had an old Macbook through my work that was running Leopard 10.5.8. After a while, I could not use a few programs on it that I wanted to, and my company was not upgrading the OS, so I purchased Mountain Lion and upgraded to 10.8.4. Six months later, we got upgraded to "new" Macbooks that are running Snow Leopard 10.6.8. My question is, do I need to purchase Mountain Lion again? Or can I transfer Mountain Lion/the license from the old Macbook to the new one?
Thanks!Of course! So simple, I can't believe I didn't even check. Thanks a ton!
Edit: crap: I meant to press that your comment solved my question, but wasn't paying attention and clicked my own.... Sorry!
Message was edited by: cheesenorris -
How can I access my iCloud account from my computer, when I'm running OSX Leopard?
I have a Mac Book running Leopard and I don't have the iCloud icon in my settings.. How can I access my iCloud account/back up my computer to the cloud?
Your signature says you have 10.6.8 which is Snow Leopard, but that is still not compatible with iCloud. You cannot back up your computer to iCloud in any case - it doesn't provide for that, only for iOS backups.
The minimum requirement for iCloud is Lion 10.7.5 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
If you have already set up an iCloud account on another Mac or device you can make limited use of it with Snow Leopard - details here.
To make full use of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
To purchase it you will have to ring Apple at the number given at the bottom left of this page.
The requirements for Mountain Lion are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
(If in fact you are running Leopard and it is an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further.) -
I have lost my installation disk for my mac book pro running Snow Leopard 10.6." Where can I replace it?"
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
-
I'm running 10.6.8 Snow Leopard fine on my MacPro1,1, Dual-Core Intel Xeon, 2.66 GHz Mac, but I need to install Lion 10.7.0 to run a program I need.How do I install OS 10.7 NOT 10.7.5, because I get this message when I try to install 10.7.5, which I've downloaded:"This update requires Mac OS X version 10.7." on a mac running Snow Leopard 10.6.8, So i need to install the original 10.7.0 over the 10.6.8 i.e. where can I find the original install app for Lion OS 10.7.0? The original Lion 10.7. is not avaialable for purchase from the App store or anywhere, even C-Net . Where can I find it to purchase?
Also it seems I cannot install Mountain Lion over 10.6.8 as advertised. When I go to purchase I get this message: "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." I think my computer can handle it (specs above) Are there any workarounds to this?If you're getting a "This update requires Mac OS X version 10.7" message, than you have the updater and not the full installer. Go to your Purchases section of the Mac App Store and you should see the full version there. But it may be 10.7.5, though in my system is shows as being from 2011 which would appear to be the original version.
As to Mountain Lion, that's supported only on the Early 2008 Mac Pro or newer.
Regards. -
My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?
Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6 -
I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?
Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system. -
My iMac running Mountain Lion can't see my iMac running Snow Leopard on my network.
My iMac running Mountain Lion can't see my iMac running Snow Leopard on my network. Both Macs work fine and the SL Mac can see and connect to the ML Mac.
There isn't a script.
Mail connects to any standard email server.
Open the Connection Doctor from the Window menu.
Click Show Details and Check Again.
What errors does it post trying to connect to your email provider.
I dont' think there is any personal information in the output, but you might want to sanitize the output in a text editor before posting the output here in case there is a login user name or something like that. -
Does anyone know if I can download photoshop cc on my imac - running Snow Leopard 10.6.8 ? will it all work?
10.7.x or newer is the system requirement for CC:
http://helpx.adobe.com/photoshop/system-requirements.html
Maybe you are looking for
-
ABAP HR: Program that will compare HR Data from System GH* and GO*
Hi ABAP Gurus, Good day. I have a requirement wherein I need to create an HR Report Program (using logical database PNP) and RFC FM wherin I will select and then compare HR Data in GH* and GO* system. This enhancement will be done in the GH* system.
-
Understanding IKE Phase I and II
Hi, I have been through the concept a lot of time but what confuses me is encryption algorithm and DH key, how they go hand in hand in the IKE phase and II. I understand phase I authenticates the vpn peers and negotiates the ISAKMP policy which inc
-
Can't shut down Firefox without using Force Quit
Firefox 3.6.9 on Mac OSX 10.5.8 will not close without using Force Quit doesn't matter what website I am on or what I am doing
-
Previous system - can i delete?
About 3 months ago I did an archive and install. Moved everything I needed to the new system folder. Is it OK to delete the 'previoius system' folder? thanks rex
-
Testing Coldfusion Applications
Hello, I've recently overtaken a large testing project of a financial solution developed in Coldfusion MX. Currently there is a large mass of code with one off directories and orphaned files linking to other places and I have no idea how to generate