Can RX9800Pro capture video?

Hello friends,
I recently purchased a MSI RX9800Pro Plus, and I have a question:
Can it really capture video?
In their oficial website MSI talks about "Capture pictures and video at up to 30 frames per second."
This card uses an VIA VT1623M for VideoOut. But this chip also ALLOWS Video In.
The card includes a cable for TV-Out S&C Conector, but in the SVideo connector I can see two arrow, each one in different ways (incoming and outcoming).
What's wrong, or what I have to do?
I also would like to ask you other things:
With default cooling I was able to push te card to a maximum of 434/369, is this OK?
Also, as you know, new VGA Silencer are out, what one should I use for the card? 9800Pro model (ATI VGA Silencer 1) or 9800XT model (ATI VGA Silencer 3), I think I should use the Pro's one, but I want someone can confirm it...
Very very thanks in advance and please excuse my english.

Tony, I disagree...
Take a look:
According to MSI´s site (http://www.msi.com.tw/program/products/vga/vga/pro_vga_detail.php?UID=576):
"• Capture pictures and video at up to 30 frames per second."
And according to VIA´s site (http://www.viatech.com/en/multimedia/vt1623.jsp):
"Input Format
Supports digital RGB (15/16 or 24-bit) or YCrCb (CCIR601 or CCIR656) 16 bit 4:2:2 input video data in both interlaced and non-interlaced formats".
So, I think that´s it´s only a driver´s matter. The board IS capable of capturing video...
Have you changed your mind yet???

Similar Messages

In v.11, how can I capture video but not audio from a camera?

In v.11, how can I capture video but not audio from a camera?

Rodney
I see what you mean....Premiere Elements 10 appears to be the last version that had options for the user to select Capture Video and/or Audio in the its Capture Window.
If you are doing DV data capture firewire into the Premiere Elements 11 Capture Windows and want a final file without audio and you cannot do this at the camera level, then consider....
1. Do the Capture "to the Timeline" - video linked to audio result on the project's Video Track 1
a. Right click the Timeline DV AVl and select Delete Audio and then edit accordingly.
or
b. Import the DV AVI but, when you go to export it, in the export settings, remove the check mark next to Audio so that the export contains only the video portion.
Publish+Share/Computer/AVI with Presets = DV NTSC Standard
Please let us know if any of that worked for you.
Thank you.
ATR

How can I capture video on my hp pavilion p6-2190ea

how can I capture video on my hp pavilion p6-2190ea
This question was solved.
View Solution.

Hi,
Please read the following article, my suggestion: use Firefox (Flashget) :
http://www.cnet.com.au/three-ways-to-save-video-from-the-internet-240091346.htm
or you can use some othe download managers such as these:
http://www.freedownloadmanager.org/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I capture video clips from you tube or my own DVD's

How can I capture video clips from my own DVD's or You Tube type of media, I am trying to create a presentation using Key Note

As long as you are using the clips with copyright permission (the organisation I work for has this for some distributers) try Wondershare (I am sure other converters are available). You can install an extension for Safari (I use FastestTube 2.2.9.3) to download from YouTube. However, please be aware that you could be breaking copyright laws when so doing.

Can I capture videos using my isight

Can I capture videos using my isight using the capture button?

Not in FCE, but you can using the QuickTime player.

Can't capture video using iSight camera in QuickTime 7.4 (92)

OK, I see that there are plenty of "bugs" with Quicktime Version 7.4 (92), but I don't see the problem I am having, posted anywhere. Here goes...
I cannot capture video using my [Firewire] iSight camera on my CoreDuo MacMini. I definitely used to be able to do this. When I go to File>New Movie Recording, I get a back/blank Movie Recording window and that's it. I click on the Red/Record button and nothing happens. The timer doesn't even advance. Just sits there. When I try to stop the recording, I get the following message:
*"Recording failed because no data was received.*
*Make sure that the media input source is turned on and playing."*
I can still capture audio, although had some problems and had to "downgrade" to version 7.3.x and subsequently reinstalled 7.4. Now the audio works but still no video.
A few things:
1. YES, the iSight camera works - I can use it in iMovie, iChat, Photobooth, etc. - for both video and audio.
2. As I mentioned, I tried "downgrading" (using "Pacifist") but still no video.
3. I re-installed Version 7.4 and the audio problems cleared up, but again, still unable to capture video.
3. All software updates installed.
Any ideas???
Thanks!

"As I mentioned, I tried "downgrading" (using "Pacifist") but still no video."
See QuickTimeKirk’s posting in the following thread:
http://discussions.apple.com/thread.jspa?threadID=1357579&tstart=0
Try the following:
Trash com.apple.LaunchServices.plist
It's located in your account:
HD/Library/Preferences/com.apple.LaunchServices.plist
Delete the file, restart (a new .plist will be created) and quicktime hopefully will work again w/o doing an Archive & Install.
+If you want to do an A&I:+
Do an archive and install of your OS from the OS disc. Stop at the QT upgrade you need.
http://docs.info.apple.com/article.html?artnum=301270 Scroll down to "Archive and Install”
IMPORTANT: Maker sure you select "preserve user preferences and data" when you performed the A&I?
Good luck!

How can I capture video directly into FCP without recording to tape first?

I hooked my Sony VX2000 to the computer via firewire and opened the Log and Capture dialog box. The video from my camera shows correctly in the preview window.
I click the Capture Now button and the capture window opens but no video displayed. The message below the window says "Waiting for Timecode".
I guess the camera doesn't send timecode when it's not recording so I press the record button. Now video shows up in the capture window. After 16 frames it freezes and an error box pops up that says "Capture Now has reached the end of the tape. All existing footage between the point where you started the capture and the end of the tape was captured successfully."
Foiled again! This has been a problem from time to time when I want to capture video from a source that does not supply timecode.
Is there any settings I can change to capture video directly from a camera using FCP without having to record it to tape in one step and then capture it in a second step?
Thanks,
Rob:-]
FCP 5.1.2 Mac OS X (10.4.8) Dual 1.8GHz Power PC G5, 3GB ram

I thought I had tried that. Thanks, that was the answer.
I am aware of the danger of not having tape backup. Having worked with the new Panasonic AG-HVX200 it is a chore to free up the P2 cards fast enough to keep from starving the camera crew. Copying the P2 contents to a single hard drive is the practice but leaves the whole shoot at the mercy of a single point of failure.
As far as my capturing directly to HD, it isn't a problem for short podcasts that could be recreated quickly if lost. Also, I can still record to tape in the camera but avoid the second step of capture when I'm in my edit bay anyway.
Peace,
Rob:-]

Faulty firewire port on DV7-3080ca: can't capture video

I have a Pavilion DV7-3080ca laptop, and I cannot properly capture video from my (Canon HV20) video camera, which I connect to the laptop's firewire (1394) port. Regular video can be captured but not without many dropped frames, and HD Video cannot be captured at all. When I connect the camera to the firewire port, the camera says "HDMI Out" on the camera screen, instead of "DV Out" as it should say, so there seems to also be a recognition problem.
Searching on the Internet, I've learned that the problem is likely the Ricoh chipset that this firewire port uses, which is apparently more problematic than the preferred Texas Instruments (TI) chipset that some other laptops use for their firewire port.
Does anyone know if there's a fix for this? Is it something that HP could fix with a future BIOS update? I was hoping that it may have been corrected in the last BIOS, but I just flashed my DV7 BIOS with the latest version from the HP web site (F.13), and it didn't help. I've also updated the graphics driver and the Intel chipset drivers; that didn't fix the problem either.
My other alternative, if there is no fix, is to purchase an Expresscard with firewire ports that uses the TI chipset. Does anyone know if that would solve my problem? I don't want to spend the extra $50 if it won't.
Some people speculate that the problem with the DV7 firewire ports is also partly because it shares IRQ16 with several other functions, in which case the Expresscard solution won't work, because I think it's on IRQ16 too.
Any tips would be most appreciated. I've tried contacting HP via Help chat and email, but neither response even acknowledged that the firewire port's Ricoh chipset is faulty, even though that seems to be common knowledge on the web.

Has anyone tried to capture video with a firewire Expresscard rather than with the faulty Ricoh-chipset-based firewire port that's built in (but faulty) on the DV7 laptop?
It's my last hope, but I'm not optimistic. Some say it won't help because it shares IRQ16 with lots of other functions. Don't really want to spend another $50 to work around a firewire port that should work properly in the first place, but I really need to be able to capture DV footage with this laptop.
Have tried to contact someone at HP who's familiar with this problem, but no luck.

Can you capture video from the internet, using premiere pro cc?

trying to capture video from the internet, using premiere pro cc, is that possible?
also - it keeps saying "video capture offline" - any solutions for that?

I am going to go out on a limb and say that while it may be against the YouTube terms of service to download or scrape a video off of their service, there are times that I really don't care since it is for my personal use. Providing myself or my wife with entertainment that she can watch or listen to on her smartphone while on an airplane, or in a car traveling down the road, just doesn't bother my moral compass. Doesn't make it twitch in the least.
Perhaps I am wrong. Perhaps I shouldn't do it. Tough. I do, and will continue to do so until the Google police come knocking on my door.
This is pretty much the same argument that they tried to kill the VCR with. The simple act of time shifting was something that was considered wrong, and illegal, until people came to their senses.
As for the editing capability, you might be surprised at the ways it is possible to download video that works just fine for what I use it for. Premiere Pro has no problems allowing me to edit out the parts I don't like, or just aren't funny, and the quality really doesn't suffer much at all.
Now, with the exception of something I did for my two year old Great Niece, I have never used any video that I have downloaded for anything except a tutorial, or in her case, a Sesame Street song I used when I shot video of me reading her the Sesame Street book that I purchased.
Would it be wrong to post downloaded video, intact or edited, for public consumption? Sure it would. No question about it.
But please do not assume that everyone downloading video from the Internet is doing so for nefarious purposes, and I promise not to assume everyone is a perfect angel and is following all the rules.

Can I capture video through a mini display port on a Mid 2012 MacBook Pro?

I want to run my xbox through a mini displayport adapter into my Mid 2012 MacBook pro to record gameplay. I understand that at one point the 27" iMac's supoorted this feature to an extent. I'm open to other options for inputs, ie: composite cables from the xbox or even VGA. I own a capture card already I'm just interested to see if there is a way around using it to save space and the mess of extra cables.

Hello OnlyoneLeaddog,
The following article contains pertinent information and useful tips that can help get your TV working with your Mac again.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

How can I capture video on a dvd disc in Adobe Premiere Pro Cs5?

Hi! I'm an amateur, I'm trying to restore a video on a vhs tape into Premiere Pro Cs5. I have Pinnacle Studio Pro 14 software, Moviebox Plus USB hardware ,Sony dvd player, and a Panasonic vcr player. I captured the vhs video to Pinnacle Studio Pro 14 and burned it on a dvd. I connected the Moviebox Plus to my computer via usb, and connected the input and output to my Sony dvd player. I opened Premiere Pro Cs5 and went to file and clicked on capture. I push play on the dvd player and nothing happened in the capture window. I noticed at the top of the capture window were some info. The info stated, "Capture device is offline". I went into Premiere Pro Cs5 to Edit and Preferences. I changed the Device Brand to Sony and the Device Type to Standard. So far, nothing has been captured. I would like to know how can I fix this problem. I know this is a lot of information, but that's the only way to state my setup and what was done. Thanks.
Gerald Sr.

The easy way is with the DVD in your PC's optic drive use Explorer to navigate into the Video_ts folder and there you will find the VOB file
If you cannot see the file extension highlight the folder and right click, select properties and from the Tools menu select folder options then in View uncheck Hide extensions for known file types.
Then you will see the .VOB file extensions.
Copy the large VOB onto your hard drive then click on it and select re-name.
Rename the .VOB to .mpg and use this file.
There is some free software VOB2MPG which does the same job but far easier.
As for learning PP go to the Creative Cow website and search there for video tutorials, there are plenty from absolute novice to full on expert.
Enjoy PP

How can i capture video via webcam

Hello All,
I want to know the video capture via webcam,as well as how do i locate webcam can anybody send code to me .
Regards
Vijay

Seriously, learn to use a search engine.
[http://www.letmegooglethatforyou.com/?q=register+capture+devices+with+JMF&l=1]

Can I capture video as .mov or .avi?

I am about to capture alot of video and I want to just save raw video clips as .mov or .avi. So they can be viewed on other computers and maybe edited on final cut pro sometime in the future. It looks like Imovie may make the files into an "imovie project file" is there any way to capture in .mov or .avi form? Or do I need to purchase Final Cut pro?

If you have QuickTime Pro, you can use the QuickTime Player to import video
(/File Menu/New MovieRecording) which will, in turn, save your video in the .mov format. You can set the QuickTime Player preferences - prior to importing - to either 320x240 'Good' (MPEG-4) or 'Better' (H.264) or 720x480 Device Native (DV) for DV Cameras. I use this method for quick imports of specific video.
Optionally, if you want to access the original imported DV clip you can either drag it from your clips pane to the Desktop (and it will copy it there for you) or you can right-click on the iMovie project file (or Control-click) and select 'Show Package Contents'. Your clips will be found insode of the 'Media' folder. Of course, these will be large, uncompressed DV files so exporting from iMovie will give you more options.

Can't capture video with FCP 5.1

Hi All,
Here is the case. I'm trying to capture the video from my newly baught Sony HDR FX7. Here are the specs:
I've connected it thru Firewire 400 on the back of my G5.
G5 660GB HD, 5.5Gb RAM
In Easy set up I've selected HDV-1080i60
When I go to file-log and capture, it connects to camcorder and says VTR OK on the bottom of the screen.
When capturing the video (after I've connected to log and capture I push play on camcorder and then click capture now on FCP) I could see on the capture screen and my video running but here an there a green line would cross the film and then it would slow down for a 10th of a second and line would run accouss the capture window again. The type of lines you'd get in the old movie? .
After I've captured all 5 sigments I had on the tape and when I tried to play (I went to file-import-file, I've selected the captured clip from my internal HD where the FCP put the files). The file opened in browser. And then it open in preview window of FCP. At this point the clip that is 1 minute long would play for 2-4 second and end there. The quality of it was also very, very poor (and I filed it at HD 1080i.
So, the quality was really poor. It was the case with all 5 clips I've captured from FX7. All of them 2-4 sec. long and very poor quality.
Now, if I try to play the clip from camcorder and select "in" and "out" points and then batch capture via the same log and capture window, it would tell me that it's "unable to locate timecode, the timecode appears to be missing from the tape. Please verify that tape is timecoded correctly"
So, I was reading this forum and did this:
Tried to go to user preferences and set "on time code brake" select "make new clip"
Nothing helped.
Also it's worth noting. When I push play on camcorder and click capture now, new window comes up and it says on the bottom of it "searching for meadia..." press esc to stop or something like that. May be it's not finding it?
Also, when I first filmed with this camera, I would stop after every clip, turn off the camera, plug it into tv and preview what I've filmed.
Either way, the few seconds of the clips that I"ve got are very bad quality. When I view the clips on my TV and monitore connected thru 3 colored cables, the video was ok, I'd even say good, just too much noice in it. But quality of capture is horrible.
If anyone is readying this, could you please give me some ideas where to go with this. I don't know what to do from here

Question is answered

Can I capture video on my MacBook Air without thunderbolt?

My MBA was released in October 2010. Camera has a 4-pin FireWire port, as well as S-Video and RCA in and out ports. Thanks!

Elgato makes video capture devices that connect via USB 2.0:
http://www.elgato.com/elgato/na/mainmenu/products/Video-Capture/product1.en.html

Can RX9800Pro capture video?

Similar Messages

Maybe you are looking for