Can S_PLO_86000028 Financial Statement report generate Cost-center report?

Dear Experts,
I've tried with S_PLO_86000028  Financial Statement report and it could generate report based on Profit Center but when I tried with Cost Center, it show no record.  Can this report generate cost center wise report?
regards,
Abraham

Hi Saga,
S_PL0_86000028 is a new FI report  for Financial Statement, created by tool Report Painter with tcode FGI1 (Create Drill-down Report).
For adding new columns, I think we can modify the form it used (0SAPBSPL-01)
It's not a good idea to copy it to z-program 'coz I still struggle with it and doesn't work well.
Solaris.

Similar Messages

  • Financial Statement report (Tr. F.01) by item hierarchy

    Hi,
    I have created hierarchy items in the financial statement version via tr. FSE2.
    Can I run the financial statement report for such a hierarchy item?
    Or is it only possible to select the G/L accounts of that hierarchy and create a variant for the Financial statement report?
    Thank you for your reply.
    Kind regards,
    Linda

    Hi,
    In FI, it is not possible to run the report for your hierarchy note.
    You need to run the report for the whole Financial Statement Version (FSV).
    However, you can create the same for a node in Profit Center Accounting.
    Before that you must make sure that you have copied the FSV to Profit Center Accounting.
    You can use KE5B for this purpose.
    Please let me know if you have further doubts.
    Regards,
    Ravi

  • Financial Statements report - F.01

    Hello,
    I posted this question to the abap forum, but maybe you can help me better. As you know, the account amounts from the financial statement report come from financial documents. And when you create a financial document  you specify a document type(vendor invoice, vendor payment and many others). What i need to do is modify the report to show only amounts from certain types, not all types. For doing that, i need to know if there is a connection between the financial statement and the documents types. I searched the code of the report and i did not find anything relevant.
    Maybe you met this requirement before and talked with an abaper. If that is the case, maybe you can give me a suggestion.
    Thank you very much,
    Efren

    F.01 is build with the following tables.  You may go through each table to see if they are document type specific.  I would cautio if F.01 is the right report for you/your client.
    TABLES:   t001,  ska1,  bhdgd,
              t011,  skat,
              t011t, skb1,
              t009,  skc1a,
              t004,
              t009b,
              t009y.
    TABLES:   rfsdo.
    TABLES:   tgsb.
    TABLES:   fimsg.
    TABLES:   faglfreesel.

  • New GL and Impact on BI Financial statement reports

    Dear All,
    I would like to know if and how the finacial statment reports  would be affected by using the new GL extractor 0FI_GL_14. New GL is being implemented on ECC,  hence the change in extractor in BI.
    Is there a standard cube that can be used for Financial statement reports(Balance Sheet comparision, BS by PC,P&L reporting by PC) for New GL.
    Currently we are getting our financial statement reports out of a Virtual cube which is based on a function module Module:RS_BCT_FIGL_DATA_GET_VC1.
    *Our current extractor for FIGL is 0FI_GL_4 .
    Appreciate your Input on this .

    Hi,
    You will find all the details here:
    http://help.sap.com/saphelp_nw70/helpdata/EN/49/5700570223413085021a8b4ef1087a/frameset.htm
    -Mayuri

  • Financial Statement Report - Special items in FSE2

    Hi,
        I'm trying to rebuild the GL Balance Report using transaction FSE2, but I can't delete or create new "special items" (the red node ones). Anyone knows how to create or delete "special items" at FSE2 to custumize the Financial Statement Report?
    Thanks in advance,
    Miguel

    Hi Miguel,
    "red" items can not be deleted, as they are set per default by the system.
    Regards,
    Attila

  • Can we change the date of cost center

    Can we change the date of cost center with we have already created????????

    Hi Shivika
    Changing a date can mean many things.. Example - You created a CC from 01.01.2014 to 31.12.2015
    If you want to have the Validity from 01.01.2013 now, create the CC from 01.01.2013 to 31,.12.2013 from KS01
    If you want to extend the validity till 31.12.9999, again do the same.. KS01 -> Create from 01.01.2016 to 31.12.9999
    If you want to shorten the validity i.e. say, You want the CC to be valid from 01.01.2015 instead of 2014, then you can delete the CC from KS04 for 2014 provided no data is posted (plan or actual)
    Br., Ajay M

  • Where I can executive Financial statement version Profit center wise

    Hello Fi-co guru's
    I have copied FSV to Profit center accounting  using t.c code KE5B,Wher I can Executive that report ?
    I want to view the Financial statement verision according to  profit center wise
    thanks in advance

    Execute either T Code S_ALR_87012284 or T Code F.01.  Fill the mandatory field (FSV name) and click on dynamic selections.  You will see three field groups in there - GL A/C Master Record, Company code and the third group which (surprisingly) has no name.  Under the third group, you can see Profit Center.

  • I can't  exclude single value in cost center of S_ALR_87013611 report

    Hello all.
    I'm using the  S_ALR_87013611 report. I need select for 'cost center'  field. I press the button  'multiple selection' for cost center field but  don't exist  the tab 'Exclude single value' and 'Exclude Ranges'. Only exists the tab: 'Select single  Values ' and 'Select Ranges'
    thank.

    HI Guerrer
    Thats a limitation...
    The field Cost center is defined as a variable and thats why you are allowed to input the values at selection screen... Sets are used in these report for variables and you can enter only the required values.. It has no option for excluding values
    Regards
    Ajay M

  • Profit Center wise Financial Statement Report

    Hi,
    We are on ECC 6.0 with New GL Active. We have three profit centers and we want to have Profit Center-wise Financial Statement (i.e. three profit center values are required in a columner format against each GL Account and a Total Value).
    Please let me know if any one has idea about it.
    Thanks in Advance.
    Regards,
    Daewoo

    HI!
    This is may be  useful  too u.
    S_PL0_86000030 - G/L Account Balances (New)
    S_PL0_86000029 - Fin. Statement: Plan/Actual Comparison
    regards,
    Rup

  • Daily Financial Statement Report

    I have defined a Trial Balance using a financial statement version. However, the report can only be generated by "posting period", I need to be able to generate my report by "posting date" so as to enable me see the trial balance on a daily basis. i.e The report should not be cumulative but should be generated daily, independent of another day. Is there a standard report to display this? If not, How can this be achieved?
    regards
    Akin.

    No standard reports which generates dialy financial reports.  You can develop your own reports with the help of your abapers

  • How can I make a Splitting in Cost center accounting by Cost elements?

    Hi experts:
    I have defined a splitting structure and I would like to split the cost bettew fixed and variables cost.
    To to that I have defined two different assignments and in the selection for each assignment  I have completed the "Field label" with:
    In the first assigment I would like to have only the "fixed cost" and I did the next:
    1. Cost element (I have entered a Group) the cost which is in this cost element group is 4.000.0000 euros
    2.- Activity type (I have entered a Individual value)
    In the second assignment I did the same but with a different Cost element group (the original amount was 6.000.000 euros
    The problem is that when I have executed the transaction to do the split, the system split the 50% of the total cost (10.000.000 euros)  to each assignment.
    How can I make if I want that the system split the cost based only in the "cost element group" which are defined one of them for the "Fixed cost" and the another one for "Variable cost"??
    Are there any method which can split a total Cost for a Cost center based only in the cost amount for a cost element group??
    Thanks a regards!!
    Manuel

    sry. im not from the united states, and I never think to spell when posting on forums
    Your site's customers will think of it, and they will regard such errors as the mark of a sloppy vendor, not a sloppy webmaster.  And I'm not sure what being from the US has to do with anything.
    I want to position the container in the center while having absolute positioning, is that possible?
    I have doubts, I've seen a lot of people saying that u can't center a container with aboslute position.
    Then you should remove those people from your circle of trust.  Of course it's possible.
    Make the container relatively positioned, and centering with an explicit width and auto left/right margins.  The inner absolutely positioned elements will center along with their positioned ancestor.

  • Can I get  Vendor Account Group & Cost center from PAYEXT Message Type?

    Hi Everybody,
    I am getting all the IDOC's of message type "PAYEXT" fro EDIDC & EDID4 tables. But will these IDOC's will contain Vendor Account Group & Cost Center ? If so could you please let me know the Segment & corresponding fields.
    Thanks & Regards,
    Nagaraju Maddi

    Hi
    You can find the all related IDOC fields in the SDATA field of EDID4 table
    Yhis is a 1000 CHAR field which stores all the Segments data by concatenating into a string
    have to search for the required field by looking into the related segment..
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • F.01 Financial Statement report -reconcilation of Stock account

    Hello,
    In the Financial statement through Tcode F.01 for FY-2010 showing Account i.e. 3xxxxxx Stock Account, showing some Value. I want to see details of G/L account Value, from which transactions Values are are flowing in 3xxxxxx Stock Account.
    Specially Closing stock value of 31.03.2011 will be also taken into this account of 3xxxxx.? How.

    Dear V raj,
    Please check the transaction FBL3N to display line items and FS10N to display periods balances.
    Let me know If you require any further information,
    Kind Regards.
    Marssel

  • Can we use FAGLFLEXT totals for cost center-cost element totals?

    Hi All
    I would like to extract data out of our sap ECC 6.0 for our data ware housing system. We have cost center and profit center as scenarios. Now my question is , Is it advisable to extract cost element-cost center totals from FAGLFLEXT or is it better to get the values from COSS?.
    Please throw your views
    Thanks

    Hi,
    I think you're better off using a combination of COSP and COSS since changes in a cost center's balance due to CO  internal allocations within the same company code will not reflect in FAGLFLEXT.
    Regards,
    Kenneth

  • Designing Financial Statement Report in ABAP

    Hi,
    I need to develop a replica of RFBILA00 with the following additional functionality
    - Amount to be displayed in two currency type at once, i.e. Local Currency (Type 10) and Hard Currency (Type 40)
    Standard report can be executed separately. I'm planning for such development that on executing zRFBILA00 it shows Local Currency in Field REPVAL while Hard Currency in field COMPVAL
    Is it right OR I can achieve my objective through much simpler way.
    BR
    Nayab

    HI,
            I have the requirment in the same report, our client wants the output to be dispalyed in period wise like
    period1  period2 period3 etc. how u created using report painter, can u kindly help
    regards,
    nagarajan.j

Maybe you are looking for