Can SAP CRM system point to different PI systems

Hi All
We have a scenario where we need to point our CRM system to multiple PI systems. Currently we are running around 100+ interfaces in our current setup i.e. CRM(A) and PI(A) systems. Can we point our CRM system to other PI system withiout having any impact to currently developed interfaces? Can we run both the interfaces in CRM point to PI (A) and PI (B).
What are all the configurations we need to do in CRM to make it point to PI(A) and PI(B). How will SPROXY tcode will look like if I point to both the ESRs.
Please suggest...Thank You.
Current Setup:
CRM (A) -->PI (A) -->3rd Parties.
Additional Requirement:
CRM (A) -->PI (A) -->3rd Parties and
CRM (A) -->PI (B) -->3rd Parties.

Hi Achuth,
Yes it's possible. Check the below links
Connect SAP Application System to multiple SAP PI Integration Server - Variant n°1
Consumer and Provider ABAP Proxy Service to Multiple SAP NetWeaver PI Systems Using Process Integration 7.1
http://scn.sap.com/people/r.tiesma/blog/2010/10/25/connecting-sap-proxy-framework-to-multiple-sap-xipi-systems
Regards,
Praveen Gujjeti

Similar Messages

SAP CRM 7.0 connected to Legacy system

Dears -
we have the requirement to connect our SAP CRM system (7.0) - that is a brand-new installation NOT to ECC, but to a legacy system.
We have planned to implement custom interfaces to replicate the masterdatas. Doubt is: can you point out which are the Best Practices / Building Blocks in order to perform the configuration in SAP CRM without being it connected to ECC.
Every reply is greatly appreciated.
Teresa

> Do you have a sort of best practifce with all the customizing steps need to be done by hand?
This depends on which scenarios you use and what you plan to do with the system. CRM is pretty complex and VERY big so there is no BP guide, especially not if there's no ERP ABAP backend. I'd start SPRO, use the standard IMG and start on top.
Markus

BW QA system pointing towards different R/3 QA

Hello all,
We have a situation here where HR is doing their QA testing in one box (DRQ) and FI is going to do their QA testing in different box (DRX) and the time difference between their testing in not much infact they will do the testing in the same time frame.
So how can i coonect BW to both the systems or how should we tackle this issue.
Please share some ideas.
Thanks,"

Hello oscar,
Atleast in my case we are having data only from one system in dev system. and then in QA we will be having two systems because of staggered implementation
So how do we do it ?
thanks

Can sap tutor player execute in the vista system?

i have installed the sap tutor in the vista system . but when i use the sap tutor player to open .sim files it will be shut down by the system .
how can i solve the problem ? the sap tutor can not be supported to execute in the vista system?
thanks

hi lion
after installing, before executing the SAP tutor, you must follow the steps that mention below, must first in the compatibility tab of the program select compatibility with Windows XP SP2
Windows Explorer --> folder c:\PlayerIE right click on file iTutorplayer.EXE --> Properties --> compatibility tab --> select compatibility mode = Windows XP SP2, save and play your tutors
regards
Rao

Can grid control monitor Databases on different operating systems?

I have a GC on LINUX REDHAT AS 3/4. Can I use that to monitor and administer Databases created on a SUN OS?. Can agents running on different OS talk to GC that is running on a different OS?.
If so, any limitations?. Pointers to a doc would be appreciated.
Thanks

Yes,

How can I get sound when running different operating systems in VirtualBox?

I am running VirtualBox in Windows XP, and have been running OpenSolaris, Kubuntu, OpenSuse 11.1, Milax and Windows 7, but I am not getting any sound in any of them. I have no problems with them running, and even ran Windows live in windows 7 without any problems.
I would be grateful if anyone can help me out so that I can get sound, and therefore run them as they are meant to be ran in VirtualBox! I have had a small problem with some video files not running in Linux and OpenSolaris, but I suspect that could be solved with Flash player.
Please someone get back to me and help me with the sound problem as soon as possible,
Thanks
John

A Windows XP host OS for VirtualBox is not a supported setup for VDI 3.0 (it wouldn't even install). I have never seen your problem with one of my other VB installations. I suggest that you repost your question in a VirtualBox forum: http://forums.virtualbox.org/

Best Approach for integrating SAP CRM with Outage Management System

Hi All,
We are moving towards deploying Outage Management System (Oracle Utilities NMS) to help localize the fault, achieve Outage Management and a transparent network with a near-real time stats. We already have SAP ECC 6.0, ISU, SAP PI 7.0 and SAP CRM 7.0. One of the challenges we are facing is to decide how should we go about the integration of SAP CRM with Oracle's Outage Management System.
Here is a sample business scenario,
CSR receives a call from a consumer and inquires about planned outages for a particular area.
This information is contained in the Outage Management System (OMS). OMS is SOA based and is hosted on Oracle Service Bus.
I want to know that is there any ES Bundles available for CRM-OMS integration? Should we go about Service Based Integration? What are the alternatives to Service based integration? Can it be done using BAPIs?
We receive around 1000 consumer complains and against every complain a ticket is generated in CRM. Now If CRM is integrated with OMS using SAP PI, the volume of the data being exchanged via PI is very much high and exceeds our licensed volume for SAP PI. So I do need to know the best practices for either approach that you may recommend.
Regards,
Adil Khalil

does anyone have an idea about this one, I've asked this question in a few places and no one really seems clear about it.
Also, I've read here and there that SAP Business One is not a real SAP product. It was bought by SAP and is sold by them but has little do to with SAP's technology (R/3, SAP ERP, Netweaver, SAP CRM, ...), and that therefore they don't support it that much ? Is any of this right ?
I'm just trying to get my vision of the SAP universe clear.
Angela

Add SAP CRM 7.0 to Discovery System?

Hello all,
is it possible to add SAP CRM 7.0 to the Discovery System?
Jan

I am sure you will be able to install an additional instance on it. But DS-V4 does not come with CRM 7.0.

Attachment Handling in SAP CRM 7.0 EHP 3.0

Hello,
We are in the design phase of an SAP CRM 7.0 EhP3 implementation project. In the current landscape the legacy system for customer service (CS) management uses an external shared fileserver for storing attachments from the CS system. However we plan to decommission this external content server as it does not support good security features.
Storing attachments in SAP CRM via content management - can SAP CRM content management support large files? What is the maximum capacity per attachment and also the overall maximum capacity that SAP CRM content management can support.
We have "heard" that SAP does not recommend storing attachments within CRM, but rather in an external secure storage server. Is this true? Is yes, what would be the best approach to store and read attachments from SAP CRM?
Regards,
Reena

Hi Christophe,
Facebook and Twitter are officially integrated into SAP CRM 7.0 EHP 3. Not LinkedIn though.
You can use a custom solution in EHP2. Example is provided in SAPPress book SAP CRM: Techical Principles and Programming.
Regards,
Pavel

IPop Use with different operating systems Windows And Mac Osx

so the quetion is this can i use my IPod with different Operatin systems?
I have a MacBook at home where i keep all my Music in and at the office i have a Windows network i would like to carry some music from home to the office using my IPod. I thought that a solution is to Partition my Ipod 40G in 2 parts and have one of them FAT so that my Windows operating system can view it.
Did any of you done it? and if so How? did you loose the use of some of the IPod functions?
let me Know if there are ways to carry music using your Ipod from the MacOSX to Windows Prof or home edition thanks!
Donatello

Your problem has nothing to do with data vs music. Music IS data. I've used my iPod for data and music since the first iPod was released. There's no reason to think the two OS versions are involved either.
Look at your usage practices - and I'm not necessarily suggesting you are abusing your computer. Has one of your computers crashed while the iPod was connected? This could cause data damage that might explain the problem. Have you ever disconnected the iPod without un-mounting it first?
You might also be creating fragmentation problems if you frequently add and remove data files while at the same time adding and removing music. One decision I made when I was using my iPod to transport lots of movies and photos for a project was to NOT make any music changes during that busy two week period.

Error Sending proxy from 2 different business system to PI

Hi All,
We are trying to send the proxy to XI system from 2 different business systems. One is ECC and other is POSDM, It is successfully sent from ECC but when sending the same from POSDM we are getting following error
"An error occurred when determining the business system (LD_ERROR)"
We checked the RFC SAPSLDAPI, LCRSAPRFC they are in place. We have also created the type H connection from POSDM pointing to PI and from PI pointing to POSDM.
And the In sxmb_adm of POSDM system the role is maintained as Application System and IS_URL parameter is pointing to PI, but still we are getting same error.
Could you all experts please provide you valuable input why this error is coming and how to resolve this?
Thanks
Ankit

Hi Soni,
check your config in sxmb_adm > Integration Engine Configuration. Also run S_BCE_68001402 and check for locked users.
Try refreshing the cache in SXI_CACHE in that system.
Check if u r executing the report in the same client in which u have done all the settings.
Also make sure that u have included the commit work statement after the Execute Asynchronous method call.
regards,
ganesh.

SAP CRM and ECC doubt

Hello,
Could anyone help me for my doubt in the SAP CRM.
When have a Two systems SAP CRM and ECC, If we create a role in CRM (Eg. Employee) how this role is transfered to ECC ?

Go to http://help.sap.com/search/sap_trex.jsp, Select "SAP Best Practices" instead of "SAP Documentation" on top.
Hope this helps.
Regards,
Kaushal

Rapid Deployment Solution for SAP CRM - Landscape

Hi
For the first time we have applied the Rapid Deployment Solution for SAP CRM ITSDO into our new DEV system. The activation of this RDS creates 2 transports (one WORKBENCH, one CUSTOMIZING)
I now need to apply the RDS to our QA and PRD systems - is it enough to just transport the 2 transports or do I need to do the entire activation again in both QA and PRD systems?
I would really appreciate any assistance here.
Thanks

Hi Leigh,
Just wondering how you got on with those transports.. Was it sufficient for you to release the Solution Builder transports to target system or did you need to carry out manual activities in the target system?
Also, What did you do with regard to activating the reporting client in the target system? did the transport take care of everyting?
Any assistance would be greatly appreciated.

Can Inbound IDOC create a BP(Business partner) In SAP CRM system

Hi
Req:
Contractor data is transfered from ERP system to CRM using Message type HRMD_ABA with ALE Distribution Model in place.
Inbound IDOC is Successfully Posted when checked in WE05 in SAP CRM System.
Question :
1. Can an INBOUND Idoc create BP automatically or is there need of Configuration or Any custom program .
Appreciate Your Response
Bhanu Polsani
Edited by: Bhanu Polsani on Oct 4, 2011 6:10 PM
Edited by: Bhanu Polsani on Oct 4, 2011 6:16 PM

You can maintain two different address for the business agreements (can be treated as mailing address for the printed invoice)but you can not maintain more than one standard address for BP as any given time.
Regards,
Sanjoy

Step by Step how we can connect SAP CRM to External system..

Hi Experts,
I want to know the informations of how we can connect sap CRM to External system, and what are the settings we have to do ,to enable XIF adapter..
This is very imp requirement kindly give support.., how we can connect to other system..through XIF Adapter..??
IS it possible to create ZBAPI in SAP CRM..?
Thankz in Advance
Regards
J Sarathi

Hi,
- Xif adapters and service process the BDOC messages.
- adapters for inbound and outbounfd processing.
-it will forward the messages from the inbound queues to the control component.
-BDOC is a business document where the flow of data to and from the CRM system takes place.
-Bdoc is a container that contain business data
- it describes the hierarchial structure of the business data.
-you can also create custom specific BDOC types,
-BDOC's as a data container to process business objects as one unit and this avoid having to transport several individual tables.
Bdoc types are found in BDOC repositry.
Bdoc types have two part
Header- consist of one single segment so-caooed control segment
Body - consist of one or more data segment
Idoc having three types of data:
control record
Data record
status record
hope it will useful.
thanks
Hemant ghiya

Can SAP CRM system point to different PI systems

Similar Messages

Maybe you are looking for