Can SAP DCOM be in 2003 Server?
Hi,
Can SAP DCOM connector be installed in 2003 server? Ive done it, but I cant create a new destination. It always display this error: Security is not enabled for ccadmin package. [-2147467260]. I tried it in 2000 advanced server and it works. Does anyone know this issue?
Kind regards,
Jun
Xiaojun,
Have you found the answer for this yet? I am having the same problem.
Thanks!
Similar Messages
-
Installation of SAP NetWeaver on Windows 2003 Server ( 32 Bit )
Hello Gurus,
I am planning installation of SAP Net Weaver - SR2 on Windows Server 2003 ( 32 Bit ) and oracle 10g is my database.
can anybody guide me from where I can install the software coz in the market place SAP N/W-SR3 is available.
Is SAP N/W - SR3 is recommeded for Windows 2003 Server ( 32 Bit ).
Can any body guide me the process & my qurey.
Thanks & Regards
ShishirRead SAp note Note 1108852 - SAP NetWeaver 7.0 / Business Suite 2005 SR3: Windows
it says:
21/MAY/08
SAP system installation only supported on 64-bit operating systems, except for dialog instances
As of SAP NetWeaver 7.0 SR3 and Business Suite 2005 SR3, SAP only supports to install dialog instances on 32-bit operating systems. All remaining SAP system instances (central instance, database instance, central services instance (SCS), ABAP central services instance (ASCS)) must be installed on 64-bit operating systems. Therefore the folder "SAP Systems" is not available on the "Welcome screen", when you start the installation from a installation master DVD for 32-bit.
You might need to install dialog instances on 32-bit if you want to use 32-bit SAP NetWeaver components, such as Adobe document services. We recommend, however, to first check whether these 32-bit components can run on 64-bit operating systems. If so, we recommend to also use 64-bit systems for these components, including the dialog instance.
If you want to install a non-productive SAP NetWeaver 7.0 SR3 based system (test systems or development are normally productive systems) on 32-bit, proceed as follows:
1. Install a SAP NetWeaver 7.0 SR2 (SAP ERP 2005 SR2, SAP CRM 5.0 SR2 SAP SCM 5.0 SR2, SAP SRM 5.0 SR2) system.
2. Patch this system to SAP NetWeaver 7.0 SR3 (SAP ERP 6.0, SAP CRM 5.0 SR3, SAP SCM 5.0 SR3, SAP SRM 5.0 SR3). -
SAP DCOM Connector on Windows Server 2008
Does anybody know, if it is possible to use the "old" SAP DCOM Connector on a Windows Server 2008 ?
I want to migrate an old ASP Web Solution with DCOM Connection to SAP from Windows 2003 Server to Windows 2008 Server.
When I try to install the DCOM Connector I get the Error Message:
"Setup could not find ActivX(R) Data Objects verion 2.5 or higher on your computer...."
That is strange, because ADO is there under C:\Program Files\Common Files\System\ado !
Thanks in advance for your help !This forum is dedicated to all other development-related questions which are not directly addressed by other forums. This includes Business Objects SDKs, products, or technologies which do not fall under BusinessObjects Enterprise, BusinessObjects Edge, Crystal Reports Server, or Crystal Reports (for example Desktop Intelligence SDK, Universe Designer SDK, Portal Integration Kits, Java User Function Libraries, and other third party technologies or development languages).
I think, you'll have better luck getting an answer in one of the SAP product forums.
Ludek -
Why can you not introduce a 2003 server into a 2008 domain?
Hello,
So we are going to be upgrading our domain very shortly from 2003 to 2008 R2. I know that we are not able to have a 2003 server in the 2008 forest, but the question is why? I'm trying to find some information on Google but can't actually find the reason.
I have some ideas as to why, but I wanted some solid info, if possible.
Thank you!In that case it depends on current functional level. If you're at 2008 or greater then you would not be able to bring in a 2003 DC.
http://technet.microsoft.com/en-us/library/cc787385(v=ws.10).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Can't turn off old 2003 server (exchange crashes)
Hello all
we have installed a new server (2012R2) with 2 VM's (DC 2012R2, Exchange 2010 on server 2008R2).
the migration has went through perfectly, but now we need to kill the old 2003 server.
when we disconnected the old server from the net there were no emails in the organization.
we tried:
removing global catalog from server 2003 (the exchange console crashed)
tried to set in exchange shell preferred domain controller (it changes for the shell session) but changes right back when closing the shell.
we are bit struggling right now, i would appreciate any ideasHi,
Thanks for your post.
If i understand you correctly, you want to remove the old domian controller from domain.
For the AD migration, I think you need to run a Metadata Cleanup to remove the DC.
For detail information, please refer to:
Remove a Current Operational Domain Controller from Active Directory
http://blogs.msmvps.com/acefekay/2010/10/09/remove-a-current-operational-domain-controller-from-active-directory/
For the exchange migration, according to the following article:
“You can run Exchange Server 2003 on either a member server or on a domain controller. After you install Exchange Server 2003 on a server, do not change the role of the server. For example, if you install Exchange Server 2003 on a member server, do not
use the Dcpromo tool to promote the server to a domain controller. Or, if you install Exchange Server 2003 on a domain controller, do not use the Dcpromo tool to demote the server to a member server. Changing the role of a server after you install Exchange
Server 2003 may result in loss of some Exchange functionality and is not supported.”
For more detail information, please refer to:
Exchange on a Domain Controller – How to Move Exchange off a DC
http://blogs.msmvps.com/acefekay/2009/08/08/moving-from-exchange-2000-currently-on-a-windows-2000-domain-controller-to-a-new-exchange-2003-server-on-a-windows-2003-member-server/
Regards.
Vivian Wang -
Oracle discoverer 9i can not running at windows 2003 server
Hi, Please help me.
When I upgrade from windows 2000 advance server to windows 2003 server the oracle discoverer 9i can not be open. When I open it there is a error "Failed to open document"
How to make it run smoothly at windows 2003 server?
Thank YouHi,
This is a bug in your version of Discoverer. There is a patch to make it work with windows 2003 or you can upgrade your Discoverer to a later version. The patch should be available from Oracle support. I don't know of anyway to make your version work with 2003.
Rod West -
i already have SAP installed in windows 2003 server. can i now install service pack-1,2 and will it not affect my SAP in the system?
Hi dear,
I will not effect to your SAP system whatever service pack you updated .please go ahead and do update your window 2003 server servie pack. -
Hello All,
Main OS : Windows 8.1 Pro
Virtual OS (Vmware): Windows server 2003
SAP is installed on Windows server 2003
I am able to work with sap on Windows 2003 but the log on pad is 640. I want to install the logon pad in windows 8 ... so that I can start SAP from there..
can any one tell me how I can do that..
ThanksHi Khan
You can install the SAPGUI 7.30 with latest patch on windows 8. Kindly refer the links
Complete Installation SAP GUI 730 and BEx Front-End - SAP NetWeaver Business Warehouse - SCN Wiki
Regards
Ram -
Trex can't be updated to higher levels on windows 2003 server 64 bit
Hi gurus,
We have a portal system (EP 7.0 SP18) and a Trex 7.0 server which are
working on windows 2003 server 64 bit on the same server.
After upgrading our portal system from sp15 to sp18, we can not see
indexes on Index Administration screen. When we tried to create the
indexes from the beginning, we faced the message "An index with the samename already exists."
We thought that the level of the Trex server(25) is low which may cause
this problem and decided to update the Trex server to level 46. We
downloaded "TREX70_46-20001842.SAR TREX 7.0 REV 46" from
service.sap.com and tried to update Trex server according to
NW70_SPSTACK_GUIDE_SPS18.pdf.During the installation a warning
message "You started an installation of sofware for platform
i386, but SAPinst is running on platform AMD64" was given. When we
continued the installation, an error message
was shown in a message box."Running msiexec.exe failed with return code
1603:Fatal error during installation. Commandline was
msiexec.exe/norestart/L sapmmcx86u.log/i sapmmcx86u.msi/qn" I searched
the sapmmcx86u.log and the error message says that this installation
package is not for windows
2003 server 64 bit.
"This installation does not support 64 Bit Windows Operating systems.
Please use the corresponding 64 Bit installation package.
Action ended 8:26:08: LaunchConditions. Return value 3.
Action ended 8:26:08: INSTALL. Return value 3.
MSI (s) (10:84) [08:26:08:578]: Product: SAP MMC SnapIn -- Installation
failed."
We searched in OSS notes and found the note "Note 1021003 - TREX 7.00 -
Update Windows 2003 64-Bit installed from DVD"
.We did the things in the note but unfortunately nothing changed.
We tried the install revision 45,44 etc but we got the same warning and
error messages.
Any suggestions?
Edited by: Tolga Akinci on Apr 30, 2009 3:08 PMHi Tolga,
You face with this error, because of Trex installation package is trying to install native i386 redistributables (vcredist_x86.msi) during the process. In order to patch Trex system on x64 architecture, follow the instructions, below;
1) Start sapinst, under your <TREX_PATCH> path
2) Ignore AMD64 warning popup
3) When popup appears on the "1603:Fatal error during installation." error, change temp folders on both environment variables, on my computer
4) Download and execute "vcredist_x64.exe" then run installer
5) After respective installation click on "Retry" button on error popup
At the end of this operation, your Trex patch will be succeeded. Please do not forget to undo your temp directory settings, on your Trex host. I hope that it is clarify your question.
Best regards,
Orkun Gedik
Senior SAP Development And Basis Consultant -
SAP Internet Mail Gateway for MS Exchange 2003 Server
Hi,
Has anybody successfully configured the IMG to work with MS Exchange 2003?
We have our 4.6C currently configured to talk to Exchange 2000 through SXC
Note 594428 - SXC: Exchange 2003 Server is not supported
Solution
R/3 Basis Release 3.1I to 4.6D:
Use IMG 4.6D and sendmail instead of the SXC (see note 101573), or
Upgrade your SAP system to Web Application Server (WAS) 6.10 or later and then use the SMTP plugin.
We only use outbound mail from SAP and this is sent to intranet users only, we are not planning on upgrading for a at least a year and would like to avoid installing another mail server.
Note 363154 - Internet mail gateway: use other MTA than Sendmail
This note suggests that any MTA (Mail Transfer Agent) can be used so long as it can be called from the command line, Exchange is an MTA, anybody now how to do a command line call for Exchange?
I have read the documentation
http://help.sap.com/saphelp_46c/helpdata/en/0c/39c93589c5ab53e10000009b38f839/frameset.htm
Jasperhi,
we are in the process of configuring the Internet Mail Gateway on R/3 4.6c on Unix platform.
I have created the RFC Destinations in SM59 and also checked the Test Connection and its working fine. I then did the Unix configuration and went on to the check whether the configuration was successful in SO01 by sending a sample text message to my company's mail address. but i did not recieve any mails on my Microsoft Outlook, instead the count under the errors column increased by one.
on checking the status for the sent message in SO01, its saying "No Delivery to [email protected](for reason, see long text)... but there's no long text either...
Can anyone please let me know the reasons for it and it would also be really helpful if someone can let me know whether i have missed any configuration settings.
Also, can someone send the list of parameters that are to be entered for the Unix configuration under mlsomadm mailgw.ini, so that i can verify whether i have entered the parameters correctly....
Kindly revert back at the earliest...
Thanks & Regards
Manicks -
hi friends,i want to install mini sap on windows 2003 server, i have two cds for that but i m not getting how to install this,n also want to know,can it be installed on windows 2003 server or it can be installed on windows 2000 only.
please help me out
thanksHi,
Depending on which mini sap version you are trying to install. If you have 2 CD's, it means that it is an old version, for starting with 6.2 mini sap comes in 3 CD's (1 Kernel + 2 Database). As for the steps to install, just insert the kernel cd and an HTML file will pop up with the steps you need to do before, during and after the installation. As for installation issues please refer to:
http://www.sap-press.com/support.cfm?account=&product=H958
Regards,
Lachker -
Can we install Windows 2003 server in a macbook?
Guys!!!
Can we install Windows 2000 or 2003 server in a macbook?
The thing is...i want to get SAP installed in my Macbook leopard, for that to happen u need windows server OS.
soo...is thr ny way that u can install windows server OS in macbook?
RegrdzTo clarify what was previously mentioned... you can only install 2003 Server using virtualization software such as Parallels or VMware's Fusion. You cannot install Windows 2003 Server using BootCamp which is the boot manager shipped with Leopard.
-
Hi Gurus,
I am lookign for SAP 4.7 installtion guide with 2000 and 2003 server can any one help me to get the same please...
NO SAP COPY RIGHTED MATERIAL PLEASE ......
please email the same : [email protected]
with regardsHi Hari,
Please can you send me the installation guide of IDES on Windows 2003 Server.
My email is [email protected]
Thanx
SALEH. -
I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.
I ended up putting it in DFU mode. It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w. I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras. -
Can't connect my Mac to my Windows 2003 server shares via SMB
Hello all
So my problem is I have my Powerbook running 10.4.7 with all the latest security updates and I cannot connect it to any shares on my Windows 2003 domain controller. Everything was working fine and I could connect to the server with no problem till about a month ago. However, I can still connect to the Windows 2000 domain controller with no problem. The error I get when trying to connect is "Could not connect to the server because the name or password is not correct". I did try clearing out my keychain, making sure all of the authentication policies on the server are correct (disabling the digitally sign commucations always policy), and I even went as far as editing a .conf file in /etc/ folder that allows for passwords to be sent without any encryption (I forget exactly what I changed but I can post that later when I get home from work) and none of this has worked. I unfortunately don't have another mac to test out connecting to the Windows 2003 server. Does anyone have any ideas of what I could do to try and get this issue resolved?TO share out as afp you need to have file and print services for macintosh installed on the 2k3 Server.
O n the main management console click on the shares icon on the left. then click the "link" create a share. The wizard will guide you through the process. i forget the order of progression but i beleive its the second or third part in the dialog it will have 2 check boxes, the top one checked by default, is to share it for windows/smb the second (lower box) is to share as AFP for mac check this box and change the share name if you like. then proceed through the rest of the wizard. Make sure you configure the security/sharing prefs for access.. we typically remove the everyone policy and add one for Authenitcated Users, and ofcourse Administrators.
Maybe you are looking for
-
FA Cost Detail Report Period wise
Hi All Please help me in solving this .Youyr help is highly needed . We have scenrio where table has entry for PERIOD NAME ,ASSSET ID ,COST ADDITION ,COST DISPOSLE ,COST TRANSFER . We need to find the COST OPENING BALANCE and CLOSING BALANCE for each
-
Hi, Good day to you all! In T-code UCMON i have short dump. I will be really grateful if somebody can guide me how to resolve this issue. Runtime Errors DATREF_NOT_ASSIGNED Short text No access possible via the 'NULL' data reference What
-
Just another ANNOYING problem with internet
Hello everybody ! So here we go, I am another user that has problems viewing web pages. To make a long story short I would like to add that though I am not a system administrator by any means, I am an experienced user. So if I say for example "I did
-
Attachment to received email not shown at all in Mail
I am using Mail and Safari on my Mac Mini with OS 10.8.5 (Mountain Lion). My email provider and ISP is BT/Yahoo! I received an email that had been written on and sent from an iPad. It was supposed to contain a one-page MS Word (.docx) text file as an
-
Chart of Account Import Template for Segment Account System
Hi experts, I want to import COA with segmentation but don't have the template for importing. Would anyone send me the template? Your help would be highly appreciated. Pls, send to my address if you have the template: tranvanson1109 @ yahoo dot com T