Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
hello,
I went to the PAM in the SAP Marketplace to see if SAP GRC AC 5.3 could connect to SAP R/3 4.7 Enterprise but I can't see all the "Add-On Product Version for...", it's cut off.
Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
If I can't is there any proof about it? I have to show it to a client.
Best Regards,
Pablo Mortera,
Pablo,
GRC AC 5.3 works perfectly fine with SAP's R/3 4.6c, mySAP ERP 4.7 and ECC systems. In fact we have two 4.7 Enterprise systems connected to GRC AC 5.3 system.
You can get the details of supported SAP ERP systems under prerequisite section of Info page of GRC AC 5.3 , it can be accessed on marketplace at -
Downloads-->Installations and Upgrades - Entry by Application Group > SAP Solutions for Governance, Risk, and Compliance>SAP GRC Access Control>SAP GRC ACCESS CONTROL>SAP GRC ACCESS CONTROL 5.3
Just ensure to have proper BASIS and ABAP support pack level as mentioned in prerequisites.
Regards,
Amol
Similar Messages
-
i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I bought the UnZipper, vV1.0.00 (4+) , couldn't download (it reported an error in the end), didn't install it but still, I was charged by you. Also I can't update "The Unarchiver", could I have any problems with my Mac? It's a one-year-old Mac Pro Laptop. Could you help me please?
Check under App Store/Purchases for your purchase. Install it from there again. ... Hopefully you did buy this from Apple's App Store, right!
-
I bought the UnZipper, vV1.0.00 (4+) , couldn't download (it reported an error in the end), didn't install it but still, I was charged. Also I can't update "The Unarchiver", could I have any problems with my Mac? It's a one-year-old Mac Pro Laptop. Could you help me please?
Mac Pro, Mac OS X (10.6.8)Check under App Store/Purchases for your purchase. Install it from there again. ... Hopefully you did buy this from Apple's App Store, right!
-
Why do I get - 'This message has no content' - with some e-mails on my iPad when the same messages can be received on my Mac Book Pro without any problem and how can I fix it?
Is this a POP (POP3) email account? If so, you MacBook Pro may be retrieving the email and deleting it off the server before your phone can. Another possibility is that both your Mac and your phone are trying to retrieving it at the same time, and the POP server, which will only allow a single email client connection at a time, is locking out your phone resulting in the "has not been downloaded from the server" error.
-
How can in Install Flash Player 10.3 without any problem?
Regards. I installed Flash Player 11, and then the 11,1 version and is truly horrible. I have uninstalled the 11 version and then tried to download (fdirectly from this boards) and Install the 10.3 and once it finished downloading, when it is set to start the installation, i get the message that the flash 10.3 cannot be installed because there is a newer version, that i should install that one, and so doe not let me Install the 10.3 version, and i am an NHL Gamecenter Subscriber and NFL Game Pass subscriber and live streaming video is horrible in the 11 version, is half speed, it looks crooked and on a bad resolution when i click the Full Screen button and none of those happened with the old 10.3 version. Please if someone can help me. Thank you very much in advance!
I've also experiencing the same issue on one of our freash computer builds today (never had Flash 11.x.x.x in it before). This computer had Flash 10.1.x.x installed (not 11.x.x.x), I tried to install 10.3.183.10 and a pop-up window comes up saying: "The version of Adobe Flash Player that you are trying to install is not the most current version. Please visit the Player Download Center to obtain the latest, most secure version.". The link takes you to the latest Flash 11.x.x.x patch.
I then uninstalled 10.1.x.x, rebooted the machine and tried to install 10.3.183.10 and got the same error message. Next I copied 10.3.183.11 to a local dir on the machine and tried to run it but it gives me the same error as above.
I've patched a couple of other machines that had 10.3.183.10 to .10.3.183.11 w/ out any problems though. -
Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!
Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?
-
Can't connect to the internet in my home yet other devices can. I tried it in other wifi places and it connects without a problem. My home wifi is with ATT Uverse. I cheched the IP address on my laptop and its different than on my Ipod although it on the same network.
Move off WEP to WPA or, preferably, to WPA2 (as recommended by Apple). WEP has been deprecated by the WiFi Alliance since 2004 as insecure (it can be cracked in seconds by any hacker).
Note that each device on a network has a unique IP address but if your address starts with 169 then you did not get a valid IP address assigned to you by your router. If restarting the router did not cure the problem then you should check for a firmware update for your router. -
I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned
Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?
-
I do not know why, but I can not go to the App Store! before I went there without any problems but now I can not connect with App Store
Open the Finder. From the Finder menu bar click Finder > Go > Go to Folder
Type or copy/paste: ~/Library/Cookies
Click Go then move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Try the App Store. -
i currently have an iphone that i connect to my mac air to download music, i have now bought a nano for my wife can we use both devices on the same air without any problems???
My wife and I both have the iPhone 4 and it's actually pretty simple. Add another user on your MBA (her) and she can use the other iTunes when she is logged in. The iTunes is empty and will erase her iPhone, so be sure that she syncs her iPhone, then back up her library onto a portable media device like I did (SD Card) and reload it onto her empty iTunes on your MBA before she attempts to sync with it.
Works well...
Sly -
Webinar- Connect Third Party Systems with SAP B1 – DI API, DI Server, B1WS
Webinar happened on 21st August.
Get the Presentation, Video recording and answers of all the questions asked in the webinar through the below link.
Webinar- Connect Third Party Systems with SAP B1 - DI API, DI Server, B1WSHi Oleksiy,
I don't see anything strange in your code. You should receive an error message but it shoudn't loop without end ;o(
The only thing I can propose you is to create a message for support, they will have a deepest look into your problem.
Regards
Trinidad. -
Problem connectivity of Web Dympro with SAP Netweaver
Hi guys,
I've a problem connectivity of Web Dympro with SAP Netweaver
I installed Sap NW in a machine on the local network with IP 192.168.x.y, and I can connect to it without problems; I can use the portal and implement jobs in Visual Composer.
After installing Sap Developer Studio, I connected it successfully to the NW through the menu "Preferences->SAP j2EE engine" selecting the option "SAP J2EE is installed on remote hosts" and inserting IP address of the machine with NW (192.168.x.y) and port 3900.
Using these parameters the logon works, in fact I can see the tab "J2EE engine".
The problem is that when I try to make the deploy, Web Dynpro asks me the SDM password (that I'm sure I've inserted correctly) but it returns the following error to me:
Deployment aborted
Settings
SDM host : SVR-NW
SDM port : 50118
URL to deploy : file:/C:/DOCUME1/Michele/IMPOST1/Temp/temp59548Welcome.ear
Result
=> deployment aborted : file:/C:/DOCUME1/Michele/IMPOST1/Temp/temp59548Welcome.ear
Aborted: development component 'Welcome'/'local'/'LOKAL'/'0.2010.09.01.07.31.29':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [svr-nw] with user name: [Administrator] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted
I want to add that I use Win XP Prof, and I set the same credentials (user "Administrator" and the correct password) I used on the machine where SAP NW is installed.Hi Michele,
There were 2 cases I explained, and the second was the one in case your SDM was blocked. Did you try the first one?
Anyways, here is something more that you can try to get it working. In case the SDM password is valid, did you log into the portal as the Administrator? If yes, then you must have been asked to change the password. If you did change the password there, login to the remoteGUI using the Master password (abcd1234) and change the password there also to the same password you use for Administrator on the Portal. Now try again.
In case the above doesnt work, start the configtool.bat from \usr\sap\J2E\JC01\j2ee\configtool and go to secure store. Here define the J2E passwords again (the same new password you gave for the Administrator in the portal), save and restart the server. I think it would work then
Hope that helps you out!
Bye,
Sameer
P.S - the main thing is that the error you got was Authentication failure using the Administrator username. Thats why you have to make sure that the password for the SDM is the same as what you gave for the Administrator login in the portal. So after you login into the remoteGUI, CHANGE the password to what you have for the Administrator(just like the one in the portal).
Message was edited by: Sameer Jagirdar -
I created a book on iPhoto. I click on the buy button, and I get a message that says Connecting with a moving blue striped rectangle. I am connected to the internet and I have made books before without any problems. I have tried for the past two weeks at various times and I get this same message each time. Any ideas about what is going on?
First confirm that you can create a PDF file of your book as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it. Post back with the results.
OT -
hello everyone.
i was surfing browsing and downloading on my iphone 4 on my home wifi and other places without any problem but today i found out that even though i'm connected to my wifi i got no internet access. i also got this new problem, my led flash is on. if i tilt the device the flas dims a bit. i tried switching off the device but still the flash is on. i tried using at other wifi network same problem. i tried forget this network, switching off and turning on the device i also tried reseting the network and also hard reseting the device. but still same problem. what can i do about this? and if i send it to apple what are my options? i got warrant coverage so will they be able to repair it ? if they are not able to repair then will they give me new iphone 4 or refurbished iphone 4 for replacement?Apple does not repair devices. If they are covered under warranty, the device is replaced. You will not get a new phone, you will get a service unit which is as good as if not better than new.
If all the basic troubleshooting from the User's Guide has been done and the device does not get Internet access via Wi-Fi from multiple locations, the only thing left is to take it to Apple.
Maybe you are looking for
-
Stop creation of reservations against the sales order
Hi I have a situation here can any body help me out? For a single material there are two types of sales orders like export and local sales. Now as the sales orders are large enough and can deliver over the six month or more. This sales order creates
-
My Ipod was stolen and I need the serial number how can I get it
My Ipod was stolen and I need the serial number. How can I get this?
-
Import data from excel file - best practice in the CQ?
Hi, I have question related to importing data from excel file and creates from those data a table in the CQ page. Is inside CQ some OOTB component which provides this kind of functionalities? Maybe somebody implement this kind of functionality or the
-
SP1 files for Project Server 2013
Hi, Where can we found the true SP1 files for SharePoint Server, Project Server and Project Pro 2013, after the withdraw of first SP1 ? Thanks
-
Problem by opening Data Orchestration Admin and Monitoring Tool
Hi all, Using SAP NetWeaver Mobile (7.1) only You can access the SAP NetWeaver Mobile Administrator through the DOE. To do this, you must log on to the DOE and choose Data Orchestration Engine ® Data Orchestration Admin and Monitoring Portal. When th