Can save but not open in explorer

I am still using XP and downloaded all updates left today, to be fully secure.  Other computer also updated.  downloaded pdf in X and saved to desktop but then box disappeared so I could no longer open pdf while in browser.  Had to go to desktop.  Uninstalled x and wetn back to 8.  Made no difference.
Can anyone explain why this has happened?  Is XP on this computer being difficult? Don't run other pdf software. Found X rather unstable.  Crashed if I was printing. Geek told me it's an XP improvement to protect me but other computer still has that lovely box.
Very curious.

Hi,
One of the probable causes of this error message is when the Input File Repository Server (FRS) is stopped, disabled, or is not accessible over the network.
In addition to what Philip has recommended, i would suggest you to first verify if your IFRS server is started and enabled. Also, kindly perform the port binding for the IFRS server by:
1. Login to CMC with an Administrator account.
2. Navigate to Servers >> Input File Repository Server >> Properties
3. Check the Request Port button and assign a port number.
4. Also assign the IP Address of the Server in IP Address radio button.
5. Restart the server and test the issue.
I hope it works for you.
Regards,
Nakul Mehta

Similar Messages

  • Can Connect but Not Open Reports from BusinessObjects Enterprise

    I have a new installation of Crystal 2008.  I can logon to the Respository Explorer, but when I try to access a report, I receive the folllowing message:
    ================================================================
    The report could not be opened from BusinessObjects Enterprise.
    Possibly the report is on a different BusinessObjects Enterprise system than the one you are currently logged onto.  If this problem persists, please contact your admistrator.
    ================================================================
    The server administrator has tried his profile and gets the same message
    I installed CR2008 on a different PC and can access without problems
    I had Crystal XIR2 installed and uninstalled it prior to CR2008
    I also had Crystal Beta for VS2020 that I uniinstalled prior to installing CR2008.
    I've tried suspending my virus protection and firewall
    It doesn't seem to be a secuity issue, but something is blocking access.  I assumed the problem would go away after uninstalling the other versions of crystal and running a registry cleaner, but I still have the same problem.
    Any Suggestions??

    Hi,
    One of the probable causes of this error message is when the Input File Repository Server (FRS) is stopped, disabled, or is not accessible over the network.
    In addition to what Philip has recommended, i would suggest you to first verify if your IFRS server is started and enabled. Also, kindly perform the port binding for the IFRS server by:
    1. Login to CMC with an Administrator account.
    2. Navigate to Servers >> Input File Repository Server >> Properties
    3. Check the Request Port button and assign a port number.
    4. Also assign the IP Address of the Server in IP Address radio button.
    5. Restart the server and test the issue.
    I hope it works for you.
    Regards,
    Nakul Mehta

  • HELP! keynote will save as ppt but not open

    My son created a project in keynote and it will save as ppt but not open, says there is a problem with the content and that it needs repair. choosing repair does nothing says part of file is missing?
    His teachers classroom requires powerpoint.
    Help!! he has worked so hard!

    With 18 veiws to this thread I can only assume that others are having anxiety attacks over this.
    Wish I could send the look on my 8 year olds face to apple when he thought all the hard work he has done
    was useless.
    Found a thread from a few months ago that has given some hope.
    share as quicktime and it will save as a .mov file that should work on PC...

  • I can't open my itunes store.  I can open my music library and sync but not open my music store. I have deleted and reinstalled ituens and still not good.  Help

    I can't open my itunes store.  I can open my music library and sync but not open my music store. I have deleted and reinstalled ituens and still not good.  Help

    I assume you are talking about iTunes on your computer, if so, you will have to remove all Apple programs associated with iTunes:
    iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support (iTunes 9 or later)
    Make sure everything that is by Apple is removed including Safari. You can sort by "Publisher", when you uninstall programs. Make sure you have at least one other web browser (like Firefox or Internet Explorer) before removing Safari. That way you can go back to the Apple web site and redownload iTunes later.
    Reboot the computer then reinstall iTunes. Everything should work normally.

  • There was away (before Mavericks) I could single click on an email and it would highlite but not open.  I could either delete or second click and the email would then open.  Can anyone tell me how to configure the prevue pane to that end with Mavericks?

    There was a way (before Mavericks) I could single click on an email in the "prevue pane" and it would highlite but not open.  I could then either delete it or click again and it would open.  With Mavericks that doesn't seem to be available making it impossible to delete an email in the prevue pane before I open it.  Its frustrating to have to go through all the monkey motions when I know I want to delete it from the get-go.  Does anyone know who to configure for that operation?  I'm using an iMac. 

    Wow,  have you ever seen 1 Billion in hard cash?  If not, I assure you it exists as well. 
    Try not to pick apart what others write because you "have not seen it." 
    I run TWO programs for protection of my MAC now and have been for sometime b/c developers of them become complacid thinking MAC is impermeable. 
    My MAC locked me out of it and two externals and when I finally did get back into them Norton Anti-Virus found a "worm."  When I asked the program to find the origin, it was traced back to an email, as you said, that I opened unintentionally.  I still have two external HDs for backup and a cloud backup now. 
    When ClamX ran after Norton was finished, ClamX found what it called as "spyware," and it's origin was in my email also.  I tried to delete the emails after the programs (both) identified the infected files, however once deleted and the computer is restarted, they were still there because I ran the scans again. 
    Now since we are no longer talking about how to turn on and off the view pane in apple mail; riddle me this,  why can't the developers of these antivirus and antispyware/malware programs get together and develop ONE PRODUCT that catches 90-95% of the viruses/worms/spyware/malware ect that get onto MAC's?  Is it because they are too busy thinking they don't exist? 
    I still run both programs and feel protected between the two.  If Norton said it was a "worm" then I believe it was a worm and if ClamX called it "spyware" then I believe it is spyware. 
    I had to wipe my MAC and do a fresh install to get it working again, then I had to open one of those externals (which was very, very difficult) multiple times until finally it displayed the message "you can view, but not change the data."  I exported as much as I could to my cloud and I had to format both of those too. 
    I still run both programs as I feel protected between the two.  If Norton tells me it is a "worm" then I believe it is a "worm;" if ClamX tells me it is "spyware" then I believe it is "spyware."  If it happens again, which my hope is that it won't, I will be more than happy to send the infected files to you!!
    Try not to "forum rage."  Support forums to post experiences and find answers, not nit-pick or claim not existance b/c you have not experienced it for yourself.

  • I can download emails, but not open them.

    I recently updated Mozilla Thunderbird to the latest version (31.5.0), and started having problems with three of my five email addresses. Specifically, I can download my messages to Thunderbird ... but not open them! When I click a message, it opens a new tab, which remains blank. I've given one of those tabs a half hour while working on other things, and the email never opened. Also, the program makes my laptop sound like it's running a marathon while it tries to simply open an email.
    The two addresses that work fine are Gmail addresses. The three that are having trouble are specific to three domains that I own. (i.e. myname @ mywebsite.com).
    I've searched for the answer, and haven't run across anyone else talking about this problem.
    I was meaning to set up these addresses through Google Apps anyway, so I connected one of the problem accounts to Google. I can now handle those emails online at Gmail, but I like the Thunderbird interface better. I had hopes that running this addy through Gmail would magically make Thunderbird work again (since Thunderbird wasn't having any problems with my @gmail addresses), but no luck.
    On top of all this, when I get fed up with Thunderbird and close it ... the program won't open again unless I restart my laptop.
    Any ideas?

    Just to add, you can also try:Main Menu > Settings > Applications > Manage Applications > All > Email > Clear Data > You will likely need to setup the email again after doing this. What are your thoughts about this forum? Let us know by doing this short survey.

  • Logic freezes and I can save but can't play audio?

    Logic has recently been freezing, it's fine in the sense that I can save but then I cant play audio and I have to force quit? Any suggestions?
    Thanks,
    Ian
    http://www.relentlessdancemusic.com/
    PowerMac G5   Mac OS X (10.4.8)  

    yes i'm using a motu 828 (original) No the sample rate is always at 44.1 but even if it switches while the program is open that dose not cause the problem.
    there are LOTS of audio files in the project copy among copy
    of drums(kick, snare, ext)
    Yes lots of midi tracks probably 12ish
    No other hardware is attached
    it's not like it's stoping and saying (error core audio) Because that happens all the time :P bc i have soo many
    tracks
    PowerMac G5 Mac OS X (10.4.8)

  • IWeb booting but not opening

    I have successfully moved my Monmouth Boat Club (monmouthboatclub.org) site to an FTP server and it has its ups and downs but generally OK. I am aware of the quirkiness of opening iWeb domain in Lion as opposed to Snow Leopard. And, above all, I back up the domain multiple places. My latest and most annoyng problem is that on my iMac (running 10.6.8), at times the domain will BOOT but not OPEN..... iWeb open innavigation but I can't get the page up. It might open the fourth time I try...or an hour or a day later. In a pinch, I go back to one of my laptops (running Lion) and open it and make changes. However, Ineed the domain to both boot and open every time on my iMac/Snow Leopard machine.Is anyone having a similar problem and can you give me some advice....
    Art

    Yes.  Lion has messed up the iWeb preference file.  There is an easy solution for that:
    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.

  • Can send but not retrieve emails using Thunderbird and Windows 8.1

    Hi, I am not able to get Thunderbird to retrieve emails on a new laptop.
    Last week I purchased a new laptop due to an imminent hard disk failure on my old laptop. I will call them "Old" and "New" laptops. (Old laptop is still working for the moment...)
    The Old laptop is nearly 3 years old, and I have been using Thunderbird on it since new without any problems.
    I have downloaded and installed Thunderbird on the New laptop, and can not get it to retrieve emails.
    As the Old laptop is still working (at the moment), I am able to directly visually compare and check settings on both computers.
    THE PROBLEM
    Using Thunderbird on the New laptop, I am able to send emails, I can see all my old emails restored from the Old laptop using Mozbackup, but clicking Get Mail on the New laptop does not retrieve new
    emails.
    When I click Get Mail, the status message in the bottom left corner says "connected to .....<ISP>..." but does not actually get the emails. However, the Old laptop is still able to get emails as it always has.
    My ISP is a large Australian telco that I have used for many years and I have not changed anything with my account. The ISP is POP3.
    WHAT HAVE I TRIED
    I deleted the email account created by restoring from Mozbackup, and attempted using the Thunderbird new account wizard, however Thunderbird did not recognise my ISP and would not create the account - even though it is working perfectly at the same time on the Old laptop.
    All Firewalls I can find have been configured to allow Thunderbird, with the same configuration settings on both machines.
    How do I know I can send but not Get emails from Thunderbird on the New laptop?
    I have sent test emails to myself from the New laptop. Thunderbird sends successfully, I am able to preview the test emails via Mailwasher on the New laptop, and can read, reply, etc, to the emails if I log into my ISP webmail service. However I can NOT get Thunderbird to retrieve and download these emails on the New laptop. If I go to the Old laptop, Thunderbird works perfectly, retrieves and downloads all new emails, including these test emails.
    I am now at the point where I do not know what else to try and would appreciate any suggestions.....
    I have spent many hours over the last 3 days surfing the net, forums, Mozilla Support, etc, and tried everything suggested, without success. The only thing I have NOT tried is starting windows in Safe mode (as per some suggestions), as it is not a viable long term solution.
    OTHER INFO
    Computer Details;-
    "Old" laptop;-
    Windows 7 Home Premium - continuously updated with all Critical and Important updates. 64 bit version.
    Antivirus = Bitdefender Total Security (subscription and licensed). Up to date.
    MailwasherPro 2012 (subscription and licensed). Up to date.
    Thunderbird 24.5.0 working perfectly. Up to date.
    "New" laptop;-
    Windows 8.1 - up to date with all Critical and Important updates. 64 bit version.
    Antivirus = Bitdefender Total Security (subscription and licensed) - downloaded and installed. Up to date.
    MailwasherPro 2012 (subscription and licensed) - downloaded and installed. Up to date.
    Thunderbird 24.5.0 - downloaded and installed.
    Note: I 'downloaded and installed' the Windows 8.1 version of these programs to avoid any potential compatibility problems restoring or copying from a Windows 7 backup version of the programs.
    1) New laptop came with pre-installed with McAfee - which has been Uninstalled due to running Bitdefender (Windows searches for 'McAfee' return nothing found suggesting the Uninstall was successful).
    2) Thunderbird has been added to both Bitdefender and Windows 8.1 firewalls on the New laptop.
    3) Bitdefender and Windows security settings are identical on both laptops - as near as I can determine, I may be missing something - but have checked all settings 3 times by doing a side-by-side visual comparison.
    4) Thunderbird settings are also identical and I am using the same email address and ISP that I have been using for many years.
    5) I migrated Thunderbird settings, accounts and emails from the Old laptop to the New laptop using Mozbackup, then visually checked and compared all settings in Thunderbird between the two machines.
    6) For info, I have used Mailwasher for many years as a simple way to preview and wash mail before running email programs such as Thunderbird - might be overkill, but I have also never had a virus or malware problem, so will keep doing this.
    7) I have Uninstalled and re-installed Thunderbird on the New laptop twice, and done the same with Bitdefender once.
    8) Any config changes I try on the New laptop, I either restart Thunderbird and / or restart the New laptop, or both.
    9) I have not created a Windows 8.1 account and am not using SkyDrive.
    10) Only other software I have installed on the New laptop is Google Chrome, Office Home 2013 and iTunes - all are working.
    Thanks in advance....

    Well there is not much left. If telnet works then the path is clear and there is no hardware firewall blocking ports.
    All that is left is software, so try windows safe mode with networking. A very handy way to eliminate software. it also actually disables most anti virus resident features and is preferred here because anti virus/security programs do not always disable or turn off when they say they have.
    You might also try the McAfee removal tool. https://community.mcafee.com/thread/52788 I notice the rep said yes to both, they did not say not required.
    Finally you could try creating a new profile, and see if it works just to exclude corruption of your existing profile. ( I doubt it but I am at the anything goes point)
    Just as an aside, I have never had an email borne nasty and I for many years never even had an email virus scanner. So yes I think your a bit over cautious with mailwasher, if that is what your using it for. Thunderbird does not support scripting languages or flash, or most plugins in the email sandbox. The result is getting a virus from a mail in Thunderbird is really only possible, for all practical purposes, if you open that password protected zip from the young Russian woman and that is what the anti virus should be blocking anyway when the temp file is written.

  • IPod appears in iTunes 7 but not in Windows Explorer

    my iPod appears in iTunes 7 but not in Windows Explorer
    also i can't put any photo on iPod

    my iPod appears in iTunes 7 but not in Windows Explorer
    if you don't have "enable disk use" or "manually manage music" selected in your summary tab, that's normal.
    do you have either "enable disk use" or "manually manage music" selected in your summary tab?

  • TS3276 Anyone experiencing problems sending mail using TalkTalk - can receive but not send  - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

    Anyone experiencing problems sending mail using Apple Mail viaTalkTalk - can receive but not send  - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

    jag157 wrote:
    "I managed to solve the problem. Under smtp settings (mail preferences/accounts/edit smtp) I set the outgoing port to 25 (as recommended by Talktalk), no authentication (set to none) and unchecked SSL. I found that until I set the port to 25 and authentication to none I was unable to uncheck SSL. One I had done this I was able to send from my main email and other email adddresses set up under my account."
    Superb advice R&W!  My email sending block using TalkTalk started 2 months ago using Snow Leopard, continued when I upgraded to 10.8.2, and has been persistent on my wife's new iPad (IOS 6.1).  Implementing your wise words has fixed all that, and now enables me to call her on FaceTime — previously only she could call me.  Thank you so much; this will save hours of further fruitless searching and phoning.
    Please remember that your email is now insecure, if you wish to have a secure connection SSL must be on and port 25 should be avoided.

  • "500 Internal Server Error" not opening into explorer

    I have problem in ORACLE BI while opening Presentation Services and BI publisher.
    I installed MS Windows 2003 Server SP2, Internet Explorer 6.0, ORACLE10g R2 database and created a database MIS. Installed JDK 1.6 and ORACLE BIEE 10.1.3.4.1
    When I open ORACLE BI Presentation Services or BI Publisher from menu it is giving
    “500 Internal Server Error” not opening into explorer. Attached is the screen shot for your review.
    The log says
    OracleJSP: oracle.jsp.provider.JspCompileException:
    Errors compiling:
    C:\obiee\OracleBI\oc4j_bi\j2ee\home\applicationdeployments\analytics\analytics\persistence\_pages\\_default.java
    An input/output error occurred
    Consult the following stack trace for detail
    java.io.IOException: cannot close class loader
    Caused by : java.lang.NullPointerException.
    All advice appreciated.
    Thanks

    Hello Brahmeshwar
    The defaulttrace error you are looking normally is just a warning, and can be simply ignored.
    Please search the Exception ID which you are seeing in the page, like "005056A0354D001F000000650000100C0004904D0B0E33C7"
    And check the detailed exception there.
    And please check whether you are getting any issue when accesing other J2EE apps like http://<host>:<port>/useradmin  or /nwa.
    Best Regards,
    Thunder

  • My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or apllications

    My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or applications.

    Hi,
    can you provide a bit more detail, as can you use the 3G network to access the web, and what security is your wireless using?
    Regards
    Ryan

  • Before partition by Boot Camp on Mac Book Pro With Mac OS Lion the computer restarts but not open wizard of Windows 7 and appears the apple with question mark...

    Before partition by Boot Camp on Mac Book Pro With Mac OS Lion the computer restarts but not open wizard of Windows 7 install and appears the apple with question mark...don't recognize disk..

    Apparently Zoo Tycoon can't be played on anything newer than 10.7.
    https://discussions.apple.com/message/21885910#21885910
    Roller Coaster Tycoon is available for purchase from the App Store.

  • Renaming datafiles in control files with database mounted but not open

    Hi,
    I moved a database (physical files) from one server to another. I need to modify the contents of the control files since the directory structure of the servers are not the same (and I can't change that).
    I know I can use ALTER DATABASE BACKUP CONTROLFILE TO TRACE to produce a script that I can than modify and run with the instance started, database mounted but not open, and that will recreate the control files. I don't want to do that.
    I was also told I can modify the datafile entries in the control files by starting the instance, mounting but not opening the database. Then I can issue the (this is the part I need help with) ALTER DATABASE RENAME FILE <file1> to <file2>. When I tried this it complains that <file1> is not found. Obviously the command I used is not the right one,,, what is the right command for what I want to do.
    Thanks,
    Gabriel

    Move all datafiles from one directory to an other without recreate controlfile :
    SYS@DEMO102> select file_name from dba_data_files
      2  union
      3  select member from v$logfile
      4  union
      5  select file_name from dba_temp_files
      6  union
      7  select name from v$controlfile;
    FILE_NAME
    E:\ORACLE\ORADATA\DEMO102C\CONTROL01.CTL
    E:\ORACLE\ORADATA\DEMO102C\CONTROL02.CTL
    E:\ORACLE\ORADATA\DEMO102C\CONTROL03.CTL
    E:\ORACLE\ORADATA\DEMO102C\EXAMPLE01.DBF
    E:\ORACLE\ORADATA\DEMO102C\REDO01.LOG
    E:\ORACLE\ORADATA\DEMO102C\REDO02.LOG
    E:\ORACLE\ORADATA\DEMO102C\REDO03.LOG
    E:\ORACLE\ORADATA\DEMO102C\SYSAUX01.DBF
    E:\ORACLE\ORADATA\DEMO102C\SYSTEM\SYSTEM01.DBF
    E:\ORACLE\ORADATA\DEMO102C\TBS102_1.DBF
    E:\ORACLE\ORADATA\DEMO102C\TBS102_2.DBF
    E:\ORACLE\ORADATA\DEMO102C\TEMP01.DBF
    E:\ORACLE\ORADATA\DEMO102C\UNDOTBS01.DBF
    E:\ORACLE\ORADATA\DEMO102C\USERS01.DBF
    14 rows selected.
    SYS@DEMO102> create pfile='E:\oracle\admin\DEMO102\pfile\pfile102.ora' from spfile;
    File created.
    SYS@DEMO102> shutdown immediate
    Database closed.
    Database dismounted.
    ORACLE instance shut down.Here, I move all datafiles mentionned above, and modify my pfile for new controlfile directory. Then :
    SYS@DEMO102> startup pfile=E:\oracle\admin\DEMO102\pfile\pfile102.ora
    ORACLE instance started.
    Total System Global Area  272629760 bytes
    Fixed Size                  1288940 bytes
    Variable Size             163579156 bytes
    Database Buffers          100663296 bytes
    Redo Buffers                7098368 bytes
    Database mounted. --Note that we are in mount state
    ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
    ORA-01110: data file 1: 'E:\ORACLE\ORADATA\DEMO102C\SYSTEM\SYSTEM01.DBF'
    SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\USERS01.DBF' to 'E:\ORACLE\ORADATA\demo102\USERS01.DBF';
    Database altered.
    SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\SYSAUX01.DBF' to 'E:\ORACLE\ORADATA\demo102\SYSAUX01.DBF';
    Database altered.
    SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\UNDOTBS01.DBF' to 'E:\ORACLE\ORADATA\demo102\UNDOTBS01.DBF';
    Database altered.
    SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\SYSTEM\SYSTEM01.DBF' to 'E:\ORACLE\ORADATA\demo102\SYSTEM\SYSTEM01.DBF';
    Database altered.
    SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\EXAMPLE01.DBF' to 'E:\ORACLE\ORADATA\demo102\EXAMPLE01.DBF';
    Database altered.
    SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\TBS102_1.DBF' to 'E:\ORACLE\ORADATA\demo102\TBS102_1.DBF';
    Database altered.
    SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\TBS102_2.DBF' to 'E:\ORACLE\ORADATA\demo102\TBS102_2.DBF';
    Database altered.
    SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\REDO01.LOG' to 'E:\ORACLE\ORADATA\demo102\REDO01.LOG';
    Database altered.
    SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\REDO02.LOG' to 'E:\ORACLE\ORADATA\demo102\REDO02.LOG';
    Database altered.
    SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\REDO03.LOG' to 'E:\ORACLE\ORADATA\demo102\REDO03.LOG';
    Database altered.
    SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\TEMP01.DBF' to 'E:\ORACLE\ORADATA\demo102\TEMP01.DBF';
    Database altered.
    SYS@DEMO102> alter database open;
    Database altered.
    SYS@DEMO102> create spfile from pfile='E:\oracle\admin\DEMO102\pfile\pfile102.ora';
    File created.
    SYS@DEMO102> shutdown immediate
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SYS@DEMO102> startup
    ORACLE instance started.
    Total System Global Area  272629760 bytes
    Fixed Size                  1288940 bytes
    Variable Size             163579156 bytes
    Database Buffers          100663296 bytes
    Redo Buffers                7098368 bytes
    Database mounted.
    Database opened.
    SYS@DEMO102> select file_name from dba_data_files
      2  union
      3  select member from v$logfile
      4  union
      5  select file_name from dba_temp_files
      6  union
      7  select name from v$controlfile;
    FILE_NAME
    E:\ORACLE\ORADATA\DEMO102\CONTROL01.CTL
    E:\ORACLE\ORADATA\DEMO102\CONTROL02.CTL
    E:\ORACLE\ORADATA\DEMO102\CONTROL03.CTL
    E:\ORACLE\ORADATA\DEMO102\EXAMPLE01.DBF
    E:\ORACLE\ORADATA\DEMO102\REDO01.LOG
    E:\ORACLE\ORADATA\DEMO102\REDO02.LOG
    E:\ORACLE\ORADATA\DEMO102\REDO03.LOG
    E:\ORACLE\ORADATA\DEMO102\SYSAUX01.DBF
    E:\ORACLE\ORADATA\DEMO102\SYSTEM\SYSTEM01.DBF
    E:\ORACLE\ORADATA\DEMO102\TBS102_1.DBF
    E:\ORACLE\ORADATA\DEMO102\TBS102_2.DBF
    E:\ORACLE\ORADATA\DEMO102\TEMP01.DBF
    E:\ORACLE\ORADATA\DEMO102\UNDOTBS01.DBF
    E:\ORACLE\ORADATA\DEMO102\USERS01.DBF
    14 rows selected.
    SYS@DEMO102> Nicolas.

Maybe you are looking for