Can SCVMM 2012 R2 exist with SCVMM 2012 SP1 in the same AD domain

We currently run System Centre 2012 SP1 (SCOM, SCCM, SCSM and SCVMM 2012 SP1).
There is no plan to upgrade the System Centre suite to R2 for another 6 months.
But we do want to use SCVMM 2012 R2. I don’t plan to use SCVMM 2012 R2 with SCOM or SCCM 2012 SP1.
Can I build a separate SCVMM 2012 R2 in the same Active directory domain or forest (on a new server, with a separate database and with different service accounts)?
Regards
Tim
Kind Regards Tim (Canberra)

Hi Tim ,
How are things going ?
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Can I share my iTunes with another User Account on the same Mac?

Hi There
I have created a new user account on my MacBook for my Boyfriend to have his own login, the only trouble being he syncs his iPod and iPhone with my iTunes library.
Is it possible to share iTunes across the 2 User Accounts on the same Mac?

I have followed those instructions and successfully have shared my music. Now for the next question!
How can we both purchase songs that automatically update on each others account? (For example if I purchase a song, it won't appear on his Library)

How Can I change a report with base in another in the same dashboard?

Hi,
I need to publish two reports in a dashboard, the first report is a list of values and the second report is a chart. When I click in a value of the first report, the second report must change with the value selected from the first report.
I first created the first report, and I changed the column properties in the data format, I selected treat text as: "Custom Text Format", the Custom Text Format is:
@[html]"<f ont class=Nav oncl ick=\"Ja vaScr ipt:GoNav(event, '/path/reporte2','TABLE','FIELD','"@"');\">"@"< /fo nt>";;@
The second Report has the next filter: FIELD is equal to / is in @{NQ_SESSION.@}
With this the first and second reports works well, however, when I include the two reports in dashboard, the second report is updated in another window not in the same section.
How Can I change the second report in the same page or section where this the first report?
Thanks
Edwin Guerrero

I am not sure whether this would work but worth a try. Create a third report which would call the 2nd report using iframe and GO URL. Name the iframe of the narrative view. And use the java script to update the iframe using objWin = window.open(<ur go url>, “biee”,”height=480,width=240,scrollbars=yes,resizeable=yes”);. I had used a similar method to integrate biee with mapviewer. You can check it out here http://oraclebizint.wordpress.com/2007/09/26/oracle-bi-ee-10133-and-mapviewer-step-by-step-integration-phase2-and-phase3/
Thanks,
Venkat
http://oraclebizint.wordpress.com

How can i get a list with all devices that have the same icloud account for iMessage, FaceTime, Reminders, etc...

Hi, I want to know which devices (iMac, MacBook, iPod, iPhone, iPad & PC) are using my iCloud account, specifically because of iMessage going to devices that im not aware of.
A list of those devices would be great.
I do have a list of the ones with find my i activated, but i want the full list. Or at least the ones being used by FaceTime or iMessage!
Thank you in advance!

I don't think there's a single place that will give you a list but you can check your devices to create one. On your iOS devices go to Settings>Messages>Receive At and check the Apple ID at the top. You can check FaceTime at Settings>FaceTime. You can check iCloud at Settings>iCloud>Account. On your Mac go to System Preferences>iCloud> click on Account Details. On your PC go to Start>Control Panel>Network and Internet>iCloud (you Apple ID is listed on the left).

How can I have two devices with separate iTunes accounts on the same computer without sharing libraries?

I have an iPhone 3s and my sister has an iPhone 3. We use them only as iPods. We each have our own iTunes account, but we have to share a computer. How can we both syn our devices without sharing our music and app libraries?

The most reliable way would be to set up individual user accounts in WIndows. Then each of your iTunes libraries will be completely separate.
Regards.

Can I share itunes purchases with my partners account on the same iphone

Both my partner and I have purchased iTunes on separate accounts. We want-to combine our purchases onto a single iPhone playlist is this possible?

Yes, but they must be in the same iTunes instance on the same computer.

Collecting data from advantech-usb4704 with two different apps at the same time

I wonder if I can access to Advantech-4704 with two different applications at the same time?
I use this block in my vis.
I have enough ports, but inputs are needed in completely different applications. Do I have to close one of them or can they run simultaneously?
Thankyou!

Dear gtu,
as nathand said, usually it is not supported to access the same physical resource simultaneously from multiple programs. In case of DAQmx for instance, you will get an error message which says that the resource is already reserved. I suppose the same would happen with your driver, however it might be worth a try.
One workaround could be however if you revise your applications and merge the codes if it is possible so that no concurent resource allocation takes place.
Best Regards,
Adam Cseh
Applications/Systems Engineer
National Instruments

SCVMM 2012 R2 – two iSCSI network interfaces connected to the same subnet

I would like to configure two networks in SCVMM 2012 R2 which will be used by VMs to connect to iSCSI SAN. Both of these networks should be connected to the same subnet (192.168.100.0/24) because they will connect VMs to Dell EqualLogic using iSCSI MPIO.
Those networks should be available on all Windows Server 2012 R2 Hyper-V cluster nodes.
When I try to create two logical networks in SCVMM with the same subnet, I receive error (Unable to assign the subnet 192.168.100.0/24 because it overlaps with an existing subnet)
How should I configure networking in SCVMM to allow one virtual machine to connect to the same subnet using two network interfaces?

"How should I configure networking in SCVMM to allow one virtual machine to connect to the same subnet using two network interfaces?"
You can achieve this by simply adding multiple vNICs to a VM - connected to the same VM Network.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Will SCOM 2012 R2 co-exist with SCCM 2012 SP1

Hi. Sorry if the answer is obvious, but I need to ask...
Will SCOM 2012 R2 coexist with SCCM 2012 SP1?
We currently have SCOM 2007 R2 installed and we'd like to upgrade.
We installed SCCM 2012 close to 2 years ago and upgraded to SP1 last summer.
We had SCOM 2007 R2 integrated with SCVMM 2008 R2, but have upgraded to SCVMM 2012 SP1 recently - so there is nothing setup between SCOM and SCVMM.
There is currently nothing setup between SCOM and SCCM.
We're a single forest, single domain shop. Ideally, we'd like or System Center products to "work together", thus the question about the 2012 SP1 and R2 mix.
Thanks for any input. I appreciate your time and expertize. Joe.

Hi,
I concur with Alexey, a side note SCCM and SCOM do not use the same SQL Server.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The problem with forecast reports in SCOM 2012 after integration with VMM 2012

Hello.
I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
could not be shown”. I find only errors in SQL Server Reporting logs like this:
library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
the target of an invocation..
Query (5, 58) Parser: The syntax for '6' is incorrect.
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
   --- End of inner exception stack trace ---;
The Russian string “Не удалось
выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
I think the problem in regional settings. By my opinion there are two possible mistakes:
SQL collation for all SQL DB instances. May be need use “Latin1_General_CI_AS”
as provided by
http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

Error: Subreport could not be shown
Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
Background
There are two possible reasons for this error:
1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
Solution
To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
If the reporting server is pointing to a wrong location, the report displays an error similar to the following:
Error message
An error has occurred during report processing.
Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
To verify the correct SQL Server computer and instance path
In Report Manager, navigate to the report generating the error and click the Properties tab.
Click Data Sources and under a Shared data source, note the path.
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
Click SCDW.
In the Connection type list, ensure that Microsoft SQL Server is selected.
In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
Note:
A period (.) denotes the local computer.
If the account has insufficient permissions, the report displays an error similar to the following:
Error message
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
schema 'dbo'.
To determine if you are experiencing the SQL Server permissions issue
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
Click DashboardComputersTrend.
If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
To grant permissions to the SQL Server computer
1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
2. On the server with the System Center Reporting database, start SQL Server Management Studio.
3. In the tree, expand Security, and then expand Logins. Do one of the following:
If the user account is listed, right-click the account, click Properties, and then go to step 5.
If the user account is not listed, right-click Logins and choose New Login.
4. In the Login name box, enter the user account (domain\username).
5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
Thanks,
Yog Li
TechNet Community Support

How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?

I have 5 of them all containing nested Apdiv within nested ApDivs (a long storie ) that I would like to insert into 5 tabs in the Spry Tabbed Panel.
Please help.

"Hi Gramp,I realize I have made hard work for myself but I really don't know any better. I also realize now that taking on this project may have been a mistake :-)I taught myself how to use the design side of Dream Weaver. These five ApDivs were created in the content area of the spry tool and it worked fine. (yes a lot of work though)For the first time I looked at the code side. I wanted to try to bring a peace of code from another page for something unrelated and when it didn't work I took it out and without noticing, deleting a line from the Spry tool.Of course like a classic newbe I was working without a backup copy so here I am. Loosing hours of tedious work and on the verve of tears :-)I do have some questions though. My APDiv
What does "apDiv1" stands for and what does "My APDiv" stands for?Is the only thing I have to do is changing this line for my five ApDivs and paste it in the appropriate places in the code? Thanks again,Gilaad
Date: Sat, 16 Jun 2012 20:39:07 -0600
From: [email protected]
To: [email protected]
Subject: How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?
    Re: How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?
    created by Altruistic Gramps in Spry Framework for Ajax - View the full discussion
You have really made hard work for yourself by using APDiv's. I suppose it can be done, but I would not. To answer your question, I have create an example as per#apDiv1
My APDiv
Content 2
Tab 1
Gramps
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4498679#4498679
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4498679#4498679. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Spry Framework for Ajax by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

On my Iphone, I have an app called Voice memos where I can record someone talking or signing. I try finding the same on my Ipad but can't find it. Does it exist on Ipad?

On my Iphone, I have an app called Voice memos where I can record someone talking or signing. I try finding the same on my Ipad but can't find it. Does it exist on Ipad?

No, but there are plenty of Apps which will do this.
Se this one for example:
https://itunes.apple.com/us/app/voice-memos-for-ipad/id364295267?mt=8

Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?

Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?

Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly Thanks anyway!

My sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same computer so my stuff with save?

my sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same macbook so my stuff with save?

How to use multiple iPhone, iPad, or iPod devices with one computer. The only way is for you to have a separate user account to log into on that computer.

Can SCVMM 2012 R2 exist with SCVMM 2012 SP1 in the same AD domain

Similar Messages

Maybe you are looking for