Can SCVMM 2012 R2 Operate Without Problems If Hyper-V Environment Is Running Windows Server 2012?

Good afternoon,
Are there any repercussions to using SCVMM 2012 R2 in a Hyper-V environment that is running Windows Server 2012? My Hyper-V hosts are running Windows Server 2012.
Thanks,

Hi,
running SCVMM 2012 R2 in a Windows Server 2012 Hyper-V environment is fully supported
best regards Marc Grote - www.it-training-grote.de

Similar Messages

Exchange Server 2013 and Remote Access VPN on a single server running Windows Server 2012?

Just by way of background, I have been installing and administering network servers, e-mail systems, VPN servers, and the like for many years. However, my involvement with Exchange and Windows Server has been mostly on the forensics and data recovery
level, or as a (sophisticated) user. I have never tried to deploy either from scratch before. My deployment experiences have been mostly with Linux in recent years, and with small private or personal "servers" running such cutting edge
software as Windows XP back when it was new. And even NetWare once.
When a client asked me if I could set up a server for his business, running Exchange Server (since they really want Outlook with all of its bells and whistles to work, particularly calendars) and providing VPN access for a shared file store, I figured it
could not be too difficult given that its a small business, with only a few users, and nothing sophisticated in the way of requirements. For reasons that don't bear explaining here, he was not willing to use a vendor hosting Exchange services or cloud
storage. There is no internal network behind the server; it is intended to be a stand-alone server, hanging off a static IP address on the Internet, providing the entirely mobile work-force of about 10 people with Exchange-hosted e-mail for their computers
and phones, a secure file store, and not much else. If Exchange didn't need it, I would not need to install Active Directory, for example. We have no direct need for its services.
So I did the research and it appears, more by implication than outright assertion, that I should be able to run Windows Server 2012 with Exchange Server 2013 on a server that also hosts Remote Access (VPN only) and does nothing else. And it appears
I ought to be able to do it without virtualizing any of it. However, I have spent the last three or four days fighting one mysterious issue after another. I had Remote Access VPN working and fairly stable very quickly (although it takes a very
long time to become available after the server boots), and it has mostly remained reliable throughout although at times while installing Exchange it seems to have dropped out on me. But I've always been able to get it back after scrounging through the
logs to find out what is bothering it. I have occasionally, for a few minutes at a time, had Exchange Server willing to do everything it should do (although not always everything at the same time). At one point I even received a number of e-mails
on my BlackBerry that had been sent to my test account on the Exchange Server, and was able to send an e-mail from my BlackBerry to an outside account.
But then Exchange Server just stopped. There are messages stuck in the queues, among other issues, but the Exchange Administration Center refuses now to display anything (after I enter my Administrator password, I just get a blank screen, whether on
the server or remotely).
So, I am trying to avoid bothering all of you any more than I have to, but let me just begin with the basic question posed in the title: Can I run Exchange Server (and therefore Active Directory and all of its components) and Remote Access (VPN only) on
a single Windows Server 2012 server? And if so, do I have to run virtual machines (which will require adding more memory to the server, since I did not plan for it when I purchased it)? If it can be done, can anyone provide any pointers on what
the pitfalls are that may be causing my problems? I am happy to provide whatever additional information anyone might like to help figure it out.
Thanks!

An old thread but I ran into this issue and thought I share my solution since I ran into the same issue. Configuring VPN removes the HTTPS 443 binding on the Default Site in IIS for some strange reason; just go and editing the bindings, add HTTPS and things
should be back to normal.

Upgrade a Domain Controller running Windows Server 2012 Datacenter Eval

Hello,
because I couldn't wait for Server 2012 to show up on Dreamspark Premium I installed the Datacenter evaluation version after I found this blog
post telling me, I could simply enter my key when I get it to upgrade to the full version.
After entering the command I get notified that "Changing this Windows edition is not supported online for a domain controller.".
The TechNet article for upgrading evaluation versions states the following:
"If the server is a domain controller, see http://technet.microsoft.com/library/hh472160.aspx for important steps to follow before proceeding."
and taking me to an article for installing/uninstalling ADDS without further comments.
Simply typing "slui 3" and entering my key states that I have to enter an eval key.
My question is: Is there a painless way to upgrade my 2012 DC without losing my AD config?
Regards,
Hans

Hi,
Please refer to the following Microsoft TechNet article to confirm if the steps of converting to full retail version are correct.
Evaluation Versions and Upgrade Options for Windows Server 2012
http://technet.microsoft.com/en-us/library/jj574204.aspx
If the warning persists, it means Windows Server 2012 Domain Controller does not support such convert. If so, please install another Windows Server 2012 full retail version or
convert to full retail version and then promote it to an additional Domain Controller for this domain. After that, transfer FSMOs to this new Domain Controller and demote the original Domain Controller.
Regards,
Arthur Li
TechNet Community Support

Laptop config for running Windows Server 2012

Hello,
For demo purpose I need to install Windows Server 2012 on a laptop, and some other 64 bits applications.
Do you experiment a specific laptop which is running fine with this OS?
For example I tried with Intel i5 and 16 GB RAM : Excel takes 10 min to load and most of the time it announces "Not responding". Same thing for all the other applications. I'm quite paralyzed in my job.
Thanks for advises!

Hi,
I am not sure what is wrong with your setup, but Windows Server 2012 can run on laptop totally fine.
Especially with your rig. Can you tell us did you do a fresh install of Windows Server 2012?
I checked some pages (not to jump to conclusions myself), and I have found out that others didn't have any issues with the setup.
These are the requirements (doesn't matter if it is a standalone physical machine or a laptop):
Windows Server 2012 requirements
Make sure your drivers are up to date.
In this article you will see that the guy used a laptop on which he had Windows Server 2008 (lower config than yours), and it worked just fine:
Installing Windows Server 2012 on ThinkPad T61
Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

Licensing help needed for datacenter server with vm running windows server 2012 essentials and ten virtual desktops for remote access

NPO wants to get windows server 2012 r2 datacenter as the main operating system and then windows server 2012 r2 essentials plus 10 windows 8.1 as virtual desktops. Each desktop for one remote user running office 2013. Is there a better configuration?
In either case what licenses does the NPO need to purchase?
Bob

Hi,
For license related questions we recommend you contact Microsoft licensing specialist.
http://support.microsoft.com/kb/141850/en-us
Regards.
Vivian Wang

Configure Hyper V Failover Cluster on Window Server 2012 R2

I have 3 node cluster of hyper v and configured csv all machine working fine but after run backup machines get paused, so i have removed backup agent, during starting one virtual machine csv volume get un accessible and all machine pertain to that csv get
offline. subjected are the errors.
Cluster Shared Volume 'Volume2' ('Volume2') is no longer accessible from this cluster node because of error '(1460)'. Please troubleshoot this node's connectivity to the storage device and network connectivity.
Cluster Shared Volume 'Volume2' ('Volume2') has entered a paused state because of '(c0000015)'. All I/O will temporarily be queued until a path to the volume is reestablished.
after troubleshooting i found a patch for the related issue but its not working for window server 2012 R2,
Windows8-RT-KB2838669-x64: its not running so kindly assist how to get this fix.
Talha Faraz Malik

Hi TFMalik,
"To avoid CSV failovers, you may have to make additional changes to the computer after you install the hotfix. For example, you may be experiencing the issue described in the "Symptoms" section because of the lack of hardware support
for Offloaded Data Transfer (ODX). This causes delays when the operating system queries for hardware support during I/O requests.
In this situation, disable ODX by changing the FilterSupportedFeaturesMode value for the storage device that does not support ODX to
1 "
For details please refer to the link below :
https://support.microsoft.com/kb/2813630?wa=wsignin1.0
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Troubleshoot problems with installing updates on Windows Server 2012 Standart Edition

When trying to install last update, receiving next errors:
Installation Failure: Windows failed to install the following update with error 0x80070020: Cumulative Security Update for Internet Explorer 10 for Windows Server 2012 (KB3003057).
Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978127).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2982998).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2993958).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3002885).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3010788).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2978121).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3006226).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3005607).
Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB2975331).
Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB3008627).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3011780).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3003743).
This problem reproduced on all my web-servers (Windows Server 2012 Std). How can I fix these problems

Hi,
Windows update error 0x80070020 can occur if a program is interfering with the automatic update process.
Restart your computer or restart your computer in safe mode with network, then try to install the updates. Detailed information you may reference the link below(this applies also to Windows Server 2012 ):
You receive error 0x80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates
http://support.microsoft.com/kb/883825/en-us
If the problem still exits, open Run, type %windir% and hit
Enter, find a text file named WindowsUpdate, uploaded the log file.
Best Regards,
Eve Wang

DirectAccess Client not connecting without error code on Windows Server 2012 R2 and Windows 8.1

Hello,
we are currently migrating from Windows Server 2012 to 2012 R2 and are not able to get the new Direct Access Service up and running. Our goal is to establish DirectAccess connection for a handful of clients using the IPHTTPS-adapter on the default port 443.
Errors:
There is actually no error showing up. It seems the infrastructure tunnel cannot be created but none of the IPv6-transition adapters is connecting (teredo and 6-to-4 are down) and the IPHTTPs adapter gives no informations about a problem:
>Get-DAConnectionStatus
Status : Error
Substatus : CouldNotContactDirectAccessServer
>Get-NetIPHttpsState
LastErrorCode : 0x0
InterfaceStatus : Failed to connect to the IPHTTPS server; waiting to reconnect
Setup:
Our setup is a virtualized Windows Server 2012 R2 Standard running on Hyper-V. It is located behind a NAT having the Port 443 mapped to the server. The only role installed after the basic install is RRAS including DirectAccess and VPN. The assistants completed
successfully (running the configuration for DirectAccess and VPN). Operation Status says everything is green und working (for multiple days in the meanwhile). A previous direct access installation (on a different machine running Windows Server 2012) has
been removed before installing the new server. The new installation is using a different router, so this might also be the cause of a problem.
The client is a Windows 8.1 notebook located outside the company network accessing the internet through another NAT-device. The client has been able to connect to the previous DirectAccess setup but has never been able to establish a connection after the
setup of the new Direct Access server. The device has no outbound constraints concerning the NAT-device and is only running the integrated Windows Firewall.
Diagnosis:
So far I've done some basic DNS and connectivity checks. The DNS-name can be resolved correctly and the router even responds to pings. The port forward is working and HTTPs connections are generally possible (temporarily routed the port to
access the NLS-Website located on the server, which worked fine).
Network monitor shows that both computers are communicating, traffic on the expected Port 443 is incoming on the server and responses from the server reach the client.
Opening the IPHTTPs-url and in an endless page load. Sometime the browser page closes but I've never seen any result. Using telnet on the port shows that the server is accepting connections. I've even build a small test application that does a GET-Request
on the URL returning HTTP-200 and no content.
I'm currently running out of ideas what to do and since no error occurs this is kind of a bit frustrating. Any help appreciated.
Regards
Matthias

Hi,
In addition, have you disabled the DA client components on the DA client? If no, please also check
the settings on the Name Resolution Policy Table.
More information:
DirectAccess
Client Location Awareness – NRPT Name Resolution
In addition, error 0x4C9 means the remote computer refused the network connection. It may be due to the invalid
registry or corrupt drivers. For more detailed information, please refer to the link below:
Error 1225 - Error Code 0x4C9
Note:
Microsoft is providing this information as a convenience to you. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Susie

Windows Server 2012 Standard - HP OfficeJet Pro 8600 Plus printer not working after promoting to Domain Controller / AD Services

An associate and myself installed the built-in drivers for the HP OfficeJet Pro 8600 Plus multi-function (network) printer on a Windows Server 2012 Standard server installation and everything worked fine whenever I want to print anything directly from the
Windows Server machine (there's a reason for this, so please understand that ;) ).
We were able to print without any problems from the Windows Server 2012 machine, using the drivers from Microsoft. Mainly, because HP has not listed any specific support for Windows Server 2012, only Windows Server 2008 R2, however, the drivers that
came with Windows 2012 seem to work very well.
PROBLEM: I later had to promote the Windows Server 2012 to a Domain Controller, and created the Active Directory configurations, even enabled the Print Services. After doing all of that, the HP printer will not print anything. It's like all print
requests directly from the Windows Server go to Nil.
Has anyone encountered a problem like this before? The only thing I can think of is that after perhaps something affected printing directly once we promoted the server to being a DC, and added other features / roles. I even tried installing the
HP drivers for Windows Server 2008 R2, and the results are still the same...nothing prints. Trust me, the printer is set as the Default Printer and even when choosing to print, we make sure the HP OfficeJet Pro is selected, and is on, as other Windows
Client PC's can print to it directly.
Does anyone have any suggestions we could try? Thanks in advance.

While it is quite a while since this was posted - I can concur a similar issue exists.
We have spent the better part of a day trying to work out why other HP printers work fine but our 8620 prints are not printing and going to Nil. The print server is hosted on a shared DC. Comparing to the initial posters details, for some reason
it seems to be most commonly related to the OfficeJet Pro 8600/8610/8620/8630 series printers.
I ended up doing a print server migration from the domain controller to stand alone host and all printers now work from a single server rather than a mix. Domain controller OSes varied from 2008, 2012, 2012 R2 (tested with multiple) and only after
all of those failed then tried a stand alone server os machine as a last resort which worked fine. Printing directly from Win 7 / 8 /8.1 clients to the IP always worked.

Serial Port communication very slow in RDP on windows server 2012

Hellò, we have installed a new server 2012 and connected some thinclients via RDP, since that moment all peripherals connected to the imported com ports of the thinclients are running very slow, for example the cash register issue any receipt only after
15-20 seconds!!. We have try to connect via RDP also a personal computer with many other OS like windows 8, windows 7, or XP but the result is the same: 15-20 seconds for a receipt!! We solve the problem only changing the server 2012 with a old server
2008 or 2003!. How is possible window server 2012 is so slow on RDP imported com ports??. There is something to set for speed up the com ports on rdp? For us this is a great problem, all of our customers are using cash register via RDP and they can't wait
all this time for a receipt. For your information we have tried to connect the cash register to the same com port of the same thinclient to the same server 2012 without RDP and the issue of the receipt is fast, so the problem is something on RDC of the new
OS windows Server 2012. Also note this is a bi-directional communication because the cash register use a bi-directional communication for printing each one of the voice on the receipt, this problem wll not affect other printers unidirectional where the
print process starting in less one second. Please help us to solve this problem, otherwise we will not more install windows server 2012.

Hi,
Thanks for your posting in Windows Server Forum.
When the slow performance issue occurs on server 2012, check the Windows Logs – Application category of the Event Viewer (eventvwr.msc) on both the client and server sides. If there is any logs recorded, please let us know them. Please also check the
driver is properly installed on server and check the compability guide with the cash register machine, whether it support server 2012 with remote session. If there is particular requirement then you need to solve them first.
In addition, would like you to try connecting with RDP 8.1 and check whether it faces same issue.
Remote Desktop Protocol 8.1 Update for Windows 7 SP1 released to web
Hope it helps!
Thanks,
Dharmesh

Window server 2012 - crash

After months of regular working, this morning my server was shoutdown.
I found this message:
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000c2 (0x0000000000000007, 0x00000000000011c1, 0x0000000000000000, 0xfffff88002ea6a78). A dump was saved in: C:\Windows\Minidump\092014-80605-01.dmp. Report Id: 092014-80605-01.
Anyone can help to understand what has been the problem?!

Here is a link to Microsoft's guidelines for installing RDSH without the Connection Broker role.
Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
http://support.microsoft.com/kb/2833839
HTH,
Jeremy

HT204053 How to run icloud control panel on a users windows 8 desktop running in windows server 2012?

I have a user on a virtual machine (server 2012) and their desktop is basically a windows 8 environment. When I tried to install icloud control panel 3 it fails, stating that it needs windows 8 or 7.
Since it really is windows 8, but icloud doesn't see that, is it possible to fix this, so it can install?

Hi jerelo:
I have successfully installed iCloud Control Panel 3 on a machine running Windows Server 2012 R2. I am not running a VM on the server; rather, the users (about 10) connect via RDC. In any event, you might check out another thread related to Server 2008: https://discussions.apple.com/message/24899308#24899308.
In the thread, a poster suggests modifying the install file to work on Server 2008 R2. I was experiencing the same problem you describe and after the fix detailed in the cited thread, iCloud installed without any problems. Now all users can access it as normal via RDC.
I hope this helps,
JW

Windows Server 2012 - Hyper-V - iSCSI SAN - All Hyper-V Guests stops responding and extensive disk read/write

We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
Our setup:
Hosts - Both run Windows Server 2012 Standard and are clustered.
HP ProLiant G7, 24 GB RAM, 2 teamed NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the primary host and normaly all VMs run on this host.
HP ProLiant G5, 20 GB RAM, 1 NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the secondary host that and is intended to be used in case of failure of the primary host.
We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched of.
iSCSI SAN:
QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
Switch:
DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
Virtual Machines:
3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
1 Windows Server 2008 Standard Exchange Server.
All VMs are using dynamic disks (as recommended by Microsoft).
Updates
We have applied the most resent updates to the Hosts, WMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
Normal operation
Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with 2 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
we see speeds up to 400 Mbit/s of combined read/write for instance during file repair
Our Problem
Our problem is that for some reason all of the VMs stops responding or responds very slowly and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
Symptoms (i.e. this happens, or does not happen, at the same time)
I we look at resource monitor on the host then we see that there is often an extensive read from a VHDX of one of the VMs (40-60 Mbyte/s) and a combined write speed to many files in \HarddiskVolume5\System Volume Information\{<someguid and no file extension>}.
See iamge below.
The combined network speed to the iSCSI SAN is about 500-600 Mbit/s.
When this happens it is usually during and after a VSS ShadowCopy backup, but has also happens during hours where no backup should be running (i.e. during daytime when the backup has finished hours ago according to the log files). There is however
not that extensive writes to the backup file that is created on an external hard drive and this does not seem to happen during all backups (we have manually checked a few times, but it is hard to say since this error does not seem leave any traces in event
viewer).
We cannot find any indication that the VMs themself detect any problem and we see no increase of errors (for example storage related errors) in the eventlog inside the VMs.
The QNAP uses about 50% processing Power on all cores.
We see no dropped packets on the switch.
(I have split the image to save horizontal space).
Unable to recreate the problem / find definitive trigger
We have not succeeded in recreating the problem manually by, for instance, running chkdsk or defrag in VM and Hosts, copy and remove large files to VMs, running CPU and Disk intensive operations inside a VM (for instance scan and repair a database file).
Questions
Why does all VMs stop responding and why is there such intensive Read/Writes to the iSCSI SAN?
Could it be anything in our setup that cannot handle all the read/write requests? For instance the iSCSI SAN, the hosts, etc?
What can we do about this? Should we use MultiPath IO instead of NIC teaming to the SAN, limit bandwith to the SAN, etc?

Hi,
> All VMs are using dynamic disks (as recommended by Microsoft).
If this is a testing environment, it’s okay, but if this a production environment, it’s not recommended. Fixed VHDs are recommended for production instead of dynamically expanding or differencing VHDs.
Hyper-V: Dynamic virtual hard disks are not recommended for virtual machines that run server workloads in a production environment
http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx
> This is the primary host and normaly all VMs run on this host.
According to your posting, we know that you have Cluster Shared Volumes in the Hyper-V cluster, but why not distribute your VMs into two Hyper-V hosts.
Use Cluster Shared Volumes in a Windows Server 2012 Failover Cluster
http://technet.microsoft.com/en-us/library/jj612868.aspx
> 2 teamed NIC dedicated to iSCSI storage.
Use Microsoft MultiPath IO (MPIO) to manage multiple paths to iSCSI storage. Microsoft does not support teaming on network adapters that are used to connect to iSCSI-based storage devices. (At least it’s not supported until Windows Server 2008 R2. Although
Windows Server 2012 has built-in network teaming feature, I don’t article which declare that Windows Server 2012 network teaming support iSCSI connection)
Understanding Requirements for Failover Clusters
http://technet.microsoft.com/en-us/library/cc771404.aspx
> I have seen using MPIO suggests using different subnets, is this a requirement for using MPIO
> or is this just a way to make sure that you do not run out of IP adressess?
What I found is: if it is possible, isolate the iSCSI and data networks that reside on the same switch infrastructure through the use of VLANs and separate subnets. Redundant network paths from the server to the storage system via MPIO will maximize availability
and performance. Of course you can set these two NICs in separate subnets, but I don’t think it is necessary.
> Why should it be better to not have dedicated wireing for iSCSI and Management?
It is recommended that the iSCSI SAN network be separated (logically or physically) from the data network workloads. This ‘best practice’ network configuration optimizes performance and reliability.
Check that and modify cluster configuration, monitor it and give us feedback for further troubleshooting.
For more information please refer to following MS articles:
Volume Shadow Copy Service
http://technet.microsoft.com/en-us/library/ee923636(WS.10).aspx
Support for Multipath I/O (MPIO)
http://technet.microsoft.com/en-us/library/cc770294.aspx
Deployments and Tests in an iSCSI SAN
http://technet.microsoft.com/en-US/library/bb649502(v=SQL.90).aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

Windows Media Player on Windows Server 2012 R2 Datacenter Edition

I have a server with Windows Server 2012 R2 Datacenter edition installed. This server is being used as a terminal server and I needed to have Windows Media Player installed in order to use a certain feature of a program running on the terminal server. After
researching online I found that all I should need to do is install the Desktop Experience feature and Windows Media Player was included in that. After installing the Desktop Experience feature and restarting the server, I was not able to find Windows
Media Player anywhere. I tried the same process on another server running Windows Server 2012 R2 Datacenter with the same results.
I was curious as to if this was a Datacenter thing where it was specifically not included with Datacenter edition. I was not able to find any documentation stating that WMP was not included in Datacenter, and everything that I found stated that the feature
sets for Standard and Datacenter were the same, it was just the licensing for them was different.
Curious to see if it would get installed with Desktop Experience on Standard, I spun up a Windows Server 2012 R2 Standard VM and installed Desktop Experience and sure enough WMP was installed as well. I then upgraded the Standard VM to Datacenter with a
Datacenter product key and after a restart WMP was still present.
I have also tried this exact same process with Windows Server 2012 (non R2) Datacenter edition and WMP was installed as expected, so it appears that this is only a problem with R2.
My question is, I this "works as designed" and I was just not able to find the documentation to support it or is this a bug?
Update: After doing some more playing around I noticed that if I did a clean install of Windows Server 2012 R2 Datacenter and then installed the Desktop Experience feature and WMP does get installed. Then I remembered that on the servers that I was trying to
install WMP on and it wasn't working were upgraded from 2012 to 2012 R2. So I created a brand new VM and installed Server 2012 Datacenter (non R2), then upgraded to Server 2012 R2 Datacenter and installed Desktop Experience and sure enough, WMP did not
install. So now I really think it is a bug and it is related to the 2012 to 2012 R2 upgrade process.

Hi Caleb CSG,
Thanks for your feedback.
I'll feedback a report to Microsoft, and I also recommend you can post this bug in Microsoft connect.
https://connect.microsoft.com/WindowsServer/feedback/CreateFeedbackForm.aspx?FeedbackFormConfigurationID=5352&FeedbackType=1
Best Regards,
Anna
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Server 2012 Essentials (not R2) - all client computers offline

The server is Windows Server 2012 Essentials (not R2). I have had this problem ever since I first installed the Windows Server 2012 Essentials server in the summer of 2013 (before R2 was released). The Windows Server 2012 Essentials server shows offline
for all Devices under Dashboard. (Allow me to add that I just installed another site with Windows Server 2012 Essentials R2, and it was a breeze - all of the computers at the second install site are online.) I have one Windows 8.1 Pro client and the rest
are Windows 7 Pro clients. The problem occurs on ALL client computers.
I have removed computers from Devices in Dashboard on the server, rebooted the server, changed the client computer to a workgroup, rebooted the client computer, and reinstalled the connector software on the client computer. Same result. I
have tried this on a Windows 7 Pro client and a Windows 8.1 Pro client with the same results.
After running the connector on a client computer and waiting for the server to update its Devices status, if I look under Devices on the server Dashboard, the Windows 8.1 client computer will say online but within 24 hours it goes offline again. The
Windows 7 client computers never show online. Both computers stay offline - they NEVER show an online status (referring to the status under Devices in Dashboard).
I should make it clear that the clients can access the server shares with no problem. File synchronization works great. The clients can ping the server and the server can ping the clients. But client backups on the server fail.
One of the most troublesome things about this problem is that it prevents the client computers from being accessed remotely using the website setup by Anywhere Access. I can login to get remote access to the shared files on the server, but
the only computer that says "online" is the server. All of the other computers are "offline".
The server and clients are only using Windows firewall. The clients all use Microsoft Security Essentials for their anti-virus.
I used a troubleshooting tool that tells me that there are problems with port 6602 on the server, but the clients are all fine with port 6602. I know port 6602 is important for using Anywhere Access but I am still trying to find out more details on that.
I have checked all of the firewall settings related to port 6602 on the server, and the firewall settings look like the standard Windows settings for this port. I used netstat to find the PID associated with the port, and I looked up the PID to find the service.
That all looked standard, too.
I have been working on this problem since the summer of 2013!! Does anyone have ANY suggestions?!!
HELP!

Hi,
Just addition, please check if all necessary Windows updates are installed on those
“Offline” client computer.
When connect client computers to the Windows Server 2012 Essentials server by using the Connector software, there
will be LAUNCHPAD on the client computer. Was this LAUNCHPAD grayed out? Please check if can access Shared Folders via this LAUNCHPAD. Meanwhile, please ping the Windows Server 2012 Essentials via IP address and server name when client computers show as
Offline. Any find?
Get Connected in Windows Server Essentials
In addition, please follow the path on Server and client computer:
%programdata%\Microsoft\Windows Server\Logs. Did you check any relevant Server-side logs and
Client-side Logs if find more clues?
Windows
Server Essentials 2012/2012 R2 Log Files
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can SCVMM 2012 R2 Operate Without Problems If Hyper-V Environment Is Running Windows Server 2012?

Similar Messages

Maybe you are looking for