Can SE generate an output signal that is the derivative of an input signal?

It there a "step" available in SE to calculate the derivative/integral of an input signal?

Querty999,
This functionality is not natively available in Signal Express.  However, it is possible to run a LabVIEW VI from Signal Express.  Here is an example from our website that has already created the VI to do the derivative with instructions for how to call it from Signal Express. 
-Christina

Similar Messages

  • Can not generate PDF Output in RoboHelp 11

    Can not generate PDF Output. I keep getting the same error message:
    "Microsoft® Word has not been started on this computer.
    Launch Word and click the 'Start using Microsoft® Word' option before generating Printed Documentation again."
    I have MS Office 2013 32-bit and RoboHelp on a 64-bit Wondows desktop.
    What do am I doing wrong?

    Is the 32 bit version of Word the only version of Word you have on the machine?
    Where does Word's normal.dot reside? On your local machine? Sometimes it gets put on a network drive and that can cause problems.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • My daughters itouch was stolen today...is there any actions i can or should be taking so that all the pictures and videos she has taken can be deleted?

    My daughters itouch was stolen today...is there any actions i can or should be taking so that all the pictures and videos she has taken can be deleted?

    Change your iTunes (Apple ID) password along with any other password that was stored in the iPod.  If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number).  If any passwords are associated with a bank or any other savings institution, contact them also and discuss approprate action with them.
    The "Find my..." function is pretty much useless if the device is in the hands of a thief.  All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
    The only real protection you have is with the personal information on the device rather than the physical device itself.  This requires action before the device is lost/stolen.  If the device has significant personal information, it should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

  • Where can I find a docking station that supports the new 7th generation Nano?

    Where can I find a docking station that supports the new 7th generation Nano?

    I am not sure if there is a lightning docking station. But you can buy a lightning-to-30-pin adapter for typical docking station.

  • How can I undo a back up that combined the contact info from 2 different phones

    how can I undo a back up that combined the contact info from 2 different phones.

    Once you merge contacts with iCloud or any back up for that matter, it will be merged until you go through and decifer which contacts you would like to keep.
    Was it an iCloud backup?

  • Can't generate SPREADSHEET output in Reports 10.1.2.0.2

    We are using Reports 10.1.2.0.2. I want to generate in my (Not deployed in the AS) PC a simple tabular report but in spreadsheet format. I use this command line command in a batch file.
    d:\OracleDevR1\bin\rwrun.exe    USERID=user1/user123@db1  
        REPORT=c:\temp\rpt_10gr2_101202_1.rep
        DESFORMAT=spreadsheet    
       DESTYPE=FILE 
    DESNAME=c:\temp\rpt_10gr2_101202_1_excel_output.xls   I get this error in the log file
    REP-0826: Invalid printer driver
    'spreadsheet' specified by parameter
    DESFORMAT.However, I can generate DESFORMAT=HTML, DESFORMAT=PDF output. The HTML and PDF files are created.
    What is the problem here?? Any help would be greatly appreciated.
    I even installed Excel 2007 but still gives the same error.
    Edited by: Rohan123 on Aug 24, 2012 4:19 AM

    rzuluaga - Oracle wrote:
    Hi,
    this is very weird as it should work fine in 10.1.2.0.2. I tested rwrun with desformat=spreadsheet on Windows and on Linux with base release (10.1.2.0.2) and it worked fine so not sure what is happening with your environment.
    My only suggestions would be as follow
    1- Make sure you are using a report with paper layout and no web layout
    2- Aapply patchset 10.1.2.3 and re-try.
    Reference
    https://updates.oracle.com/Orion/PatchDetails/process_form?patch_num=5983622
    Regards, RobertoSorry Roberto, I have mistakenly used the 10G release 1 EXE. When I use my 10g R2 exe we can generate spreadsheet format. BUT, the spreadsheet is useless for complex reports. The excel sheet is not readable since lots of blank lines added and also lots of blank columns added. No images also there that is found in the PDF output. So, it's not WYSIWYG type output.
    We are now trying to patch the 10g r2 to 10.1.2.3 and use the ENHANCEDSPREADSHEET format.

  • Can I generate a DSC alarm based on the difference of two signals?

    In the Tag Configuration Editor of the DSC module, you can set lower and upper limits on any signal (tag). This works well if the signal is expected to always be within a certain range. However, if the signal is expected to vary according to a predefined pattern, how can I detect when it passes out of the expected pattern? - In my case the problem is made easier since I have two signals I can monitor: a setpoint and an actual. Therefore I can calculate the difference between setpoint and actual and set an alarm if the difference exceeds some maximum value. However, the DSC tag configuration editor does not allow these kind of "derived channels".
    One possible solution is to run LabVIEW code to mon
    itor these signals in real time, continually calculate the difference and generate an error if the difference exceeds the limit I have set. The problem is there does not seem to be a way to programmatically generate a DSC alarm.
    Another possible solution, but requiring more work, is to create my own VI-based server to monitor the derived channels. Then there would be two servers running - logos to acquire the FieldPoint data- and my VI based server to calculate the derived channels in real time. My question is: Is there an easier way to do this?

    Hi Chris,
    Go with your first proposed solution -- and write the result to a Discrete Memory tag. And set this tag to alarm on High. This will now act as your alarm tag.
    Hope this helps.
    Regards,
    Khalid

  • How can I generate digital output?

    I was introduced to LabVIEW and NI Elvis last month and I have been asked to generate three digital signals to control three different relays.
    what are the basic steps I have to do to generate the signals

    You may want to start with this overview.
    Your specific application is rather easy, so you may be able to even use the parallel port to control the relays, but that depends on the type of relay, current source/sink requirements, voltage requirements, etc.

  • How can I create a new calendar that starts the week on monday?

    Excel can do it, but I really like the template for calendars in numbers. That calendar is for printing it, so i don't need any special functionalities, only the template, with blank cells i can hand-write in.
    Thanks!

    Hi And95es,
    The Calendar template is very clever. Changing it to start on Monday would be a huge task. Here is an idea for a non-automatic calendar. Start with a table for month and year. Hide the table name if you like.
    A1 is a pop-up menu to choose a month. Type the year in B1.  I am trying to come up with a formula to show the day of the week for that month and year in B2. This is because you will have to type a 1 into the correct day in the calendar table to generate dates for the whole month.
    Create an  outline calendar like this:
    A2 contains the number 1
    B2=A2+1 and fill right
    A4=G2+1
    B4=A4+1 and Fill Right.
    Now select Row 4 and copy.
    Paste into every second row below.
    Format the table to make cells big enough to write in. Save as Template because you are about to make a calendar and you will need the template for next month.
    Type a 1 into the cell that is the first of that month. Now clear contents of cells you don't need.
    It would be handy to have a formula to show weekday for the first of the month. Not essential!
    Regards,
    Ian.

  • Can anyone assist with a report that extracts the External ID field in the CRM

    I have a membership system where the client has imported 3600+ records some of which had the Eternal ID ('Your ID field on the import file) set and some don't.
    The trouble is I need to update all the CRM records and can't import the changes as I don't know what the original external id value is. Business Catalyst support advised that they can't include this field in any report (don't get me started on that...) and I am now desperately in need of some way to get that data which is on the file and is critical to any further updates via the import files. I would delete all the records and start again except that there is no bulk delete option in BC CRM - yes you can do it in products but not CRM or Web Apps...!!! The only option available in BC is to delete one screen list at a time but then I have the issue that this matter does not relate to all CRM records - only those whio are members of a secure zone.
    My need is urgent so any assistance free or otherwise would be approeciated and the solution needs to be one that enables me to run such an export on an irregular basis.

    OK... thanks to those who offered assistance and I now feel somewhat a goose but then not altogether.
    BC in its usual style of help documentation, are not at all clear in their explanation of how the Unique Id (which is actually the field 'External ID' in th CRM under the Misc section). Below is the description extracted from the import template
    The above columns represent all the available columns that can be imported using the standard contact import feature. Columns do not need to contain information but they must be present on the page, especially if a proceeding column contains information.
    If your organization uses its own unique identification number to differentiate between customers then use the Your ID column. If a value is present in this column then it will serve as the unique identifier. This means if the contact was previously imported and it is being re-imported then his or her details are updated, otherwise a new contact record is created regardless of whether a similar contact already exists in the system.
    If the Your ID column is not used then contacts are generally identified by their email address. The minimum requirement to import a contact into the system is that either Your ID, Email Address, Fullname, firstname or last name must be present on a single row. If these values are missing the the row is not imported and the import will move to the next row.
    If you don't provide Your ID nor an email address and only a name then the contact is added each time regardless of whether a similar one already exists in the system.
    Now my understanding is that if you have used the Your Id then being the unique identifier and as such all future imports would have to use that... Well no this isn't the case at all.
    If you import a set of records that all use the Your Id you can simply update those same records with just the email address - you don't need to Your Id or External Id at all!!!  So what is the purpose of this field at all? I have no idea myself as it can't be reported, it can't be exported, it can't be referenced - in fact the only way you will ever see it is to open the CRM record and expand the Misc details and buried at the bottom you will find it. Now that is what I call an undocumented feature !
    So end of it all is - my concerns all proved baseless and you don't have to concern yourself with the External / Your Id field no matter what the customer does.
    My advice - forget this field exists and don't bother trying to use it unless you might happen to be interfacing into some 3rd party system through PAI's as this seems to be the only use I can think of for it.

  • Can you share photos between machines that use the same wifi network? Thanks for your help.

    Can you share photos on i-photo between machines that use the same network or even between different accounts on the same machine? I know you can share music on i-tunes but can you do the same on i-photo? Thanks for your help.

    Yes.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
    Remember iPhoto must be running in both accounts for this to work.
    You can figure out using it with another machine from that too

  • How can I implement a backup 6500 that broadcasts the same OSPF networks?

    I feel as though the answer for this is extremely simple, but my routing experience is very minimal. We have a 6500 switch that shares about 10 OSPF networks, which is behind out 7200 router; and we have a spare 6500 we would like to put into place at our second location as a failover. Can I add the same OSPF networks to this second 6500, or will this cause issues since two switches will be broadcasting the same network. 
    In the case that our core 6500 goes down, i would need the other 6500 to continue broadcasting these networks. 

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    Yes, it's possible for two locations to advertize the same networks, but this implies that both locations can (normally) reach all the hosts on those networks (at either location).  Also, if there's some kind of failure, some hosts (like one location's hosts) often can no longer be reached.  That's normally ok, but what's normally not okay is for hosts on the same network to be partitioned.
    Also, when you start to have networks across locations, sometimes there's requirements for hosts to logically migrate to the site that still is advertizing the host's network.
    It can all get rather complicated depending on what exactly you're trying to accomplish.

  • HT4641 I will no longer use pages because I can open any rtf's and that is the majority of my files.  Any ideas?

    I will no longer use Pages because I can't open any rtf's and that is the majority of my files.  For years I have saved all files as rtf to allow me to open them on windows and with any word process program. Now the new version of Pages will not open them. Any ideas?

    You can let Apple know you want this feature back via
    http://www.apple.com/feedback
    and find another word processor.
    Are you talking about a Mac or an iPad/iPhone?

  • Can't install, get error message that says "The website declined to show this page"

    I've been using Firefox for years now, but recently I had some problems with my computer and had to re-install Windows. I am now running Windows 8.1. I can't install Firefox now. It's very strange. When I attempt to install, I get an error message that says, "The website declined to show this webpage". It says the most likely cause is that the website requires you to log in. I have never experienced this issue before and like I said, I've been using Firefox for years. My anti-virus software found that the installation is accessing a web resource called DynamicOfferScreen, so I think the installation is corrupt. Can someone send me a link to download a clean installation?

    You might have loaded an unofficial bundle advertised as a Firefox download...
    Please start with the Windows Control Panel, Uninstall a Program. (Use the charms bar search box if necessary to find it.) Click the "Installed on" column heading to group by date and reveal what bundled items may have snuck in. Remove everything you do not know to be legit and valuable.
    Next, in Firefox, review your extension and disable/remove anything unrecognized or questionable. if in doubt, disable. You can do that on the Add-ons page. Either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Extensions.
    Finally, after clearing those out, mop up with some of the scanning/cleaning programs listed in our support article: [[Troubleshoot Firefox issues caused by malware]].
    Back to normal?

  • Can I create a fillable PDF that allows the user to attach a file to the submitted form?

    There are suggestions in the Help documentation and on this site that indicate it is possible to attach files to a fillable PDF form that is being submitted. But I do not see any instructions for adding this functionality to a form. I am using Acrobat 9 Pro to create my form. I have a Submit button with an Action/Menu Item/Submit a form option, and the URL link for the submission is a local coldfusion file with a #FDF suffix. The export format is HTML. The form also contains a hidden EMAILTO field, with an Options/DefaultValue option identifying the recipient's email address. (I'm guessing the local cfm file uses this field.) There is also a hidden URL field in the form, and its Options/DefaultValue specifies the URL of the fillable form itself. (Perhaps the local cfm file uses this field too.)
    How can I add functionality to this form, using Adobe/PDF, to allow the user who submits the form to attach a file to the submission?

    You have to first configure a text field so it can be used for file selection. You do this on the Options tab of the field properties dialog. In order to select the corresponding check box, make sure only the "Scroll long text" option is selected.
    You then can set up a button that has the following JavaScript attached to the Mouse Up event:
    // Mouse Up script for button
    getField("upload_text_field").browseForFileToSubmit();
    Replace "upload_text_field" with the actual name of the file selection text field.

Maybe you are looking for