Can See a printer But can't Print

So here at work I can see a coworkers printer and I can tell my computer to print to it and then it opens the printer's window. But then it just says printing and never prints.
What is set up wrong. The file sharing is turned on. I have no clue where to go with this one.

Suggest you update your OS to 10.5.8
Yes you can, if both the printer and your Mac are on the network.
You need the printer's IP. You can get this info off one of the pcs. Something along the lines of 192.168. x. y
With your Mac and the printer on the network, go to Apple Menu / System Preferences / Print & Fax.
Click the + (plus sign).
On the next pane click the IP icon.
On the new pane, enter the following: in the first line select Internet Printing Protocol
On the second line enter the printer's IP.
Click Add.

Similar Messages

  • When I try to go on the internet with my iPad 2, the whole section is greyed out.  I can see the webpage, but can not navigate any further.

    When I try to go on the internet with my iPad 2, the whole section is greyed out.  I can see the webpage, but can not navigate any further.  I do have wifi access, though.

    Try:
    - A reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Power off and then back on the router
    - Reset Network Settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • Apple TV 2 Can See My Library, But Can't Connect for Home Sharing

    I'm really at my last rope, so hoping someone will have mercy and be able to help here.
    Symptoms:
    - Go to my Apple TV 2
    - Under the Home Sharing menu, select "Adam Nash's Library"
    Result:
    - Spinning cursor
    - Cannot connect to "Adam Nash's Library".  Please check that your computer is on and on the same network.
    Internet access works for all devices, they all can do Netflix and Apple Store.  Only one network in the house.  No firewall activated on the mac.
    I have multiple AppleTV units, and this has intermittently affected all of them.  Periodically, I have solved the problem by taking them on / off ethernet.
    Things I have tried:
    - Restarting iTunes on the computer
    - Turning Home Sharing on and off on AppleTV
    - Turning Home Sharing on and off on iTunes
    - Rebooting the computer
    - Resetting the AppleTV units
    - Restoring the AppleTV units
    - Forcing the AppleTV units to different IP
    - Forcing the AppleTV units to Ethernet instead of Airport (by plugging into Airport base stations directly)
    - Swapping AppleTV units to different rooms
    Nothing works.
    One clue.  I have three Airport Extreme base stations in the house, and this problem begain when one of them started misbehaving (would connect, but wouldn't pass through packets.)  It's an Airport Extreme Base Station (Series 1).  The other two are Series 4 & Series 5.  I reset the misbehaving box and reconfigured it, and seems to be working fine from a networking standpoint.  But once that happened, one of the AppleTVs started showing this problem.
    Is there some reason that Home Sharing is hyper sensitive to the network in some way?  It *seems* like what's happening is that it's seeing the iTunes Library (which is why it show's the Library name), but when it tries to connect, something is either encrypted differently or permissioned wrong. 
    Hoping someone can help me.  Frustration is at 11.

    One clue: I have found a reliable way to solve the problem when it happens.
    In my network, I have the main Airport Extreme (Gen 1) which is connected to my router, which distributes IP addresses to my internal subnet.  The other two AEs (one Gen 4, one Gen 5) are set to extend the network.
    When I get this problem with an AppleTV 2 that can "see" my library, but when I try to open it, it says it couldn't find the library, it seems to have to do with a change in which Airport Extreme it's talking to.
    If I restart the main Airport Extreme from the Airport Utility, effectively restarting the entire wireless network, then when the network resumes, every AppleTV 2 is happy again.
    Unfortuntely, the problem does seem to recur - but I'm wondering if it's because temporary interference leads an AppleTV 2 to try to connect to a different AE, and somehow that's mucking with the Home Sharing.  Remember, internet access (Trailers, Store, Netflix) have no issues.  Purely Home Sharing.
    Adam

  • I can see my library, but can't connect to the iTunes store

    I can see my library, but the iTunes store page will not come up completely.  I'm running Windows 7 with iTunes 11.0.5.5.

    I ended up reinstalling iTunes and now it's fine.

  • My emails can see on iMac but can not see on iPad

    My emails can view on iMac but can view on iPad.

    This problem must be minor I must have  pressed a button. I can open the mail but can open the contends

  • ITunes (and Airfoil) can see Airport Express but can't connect in Windows XP (error -15000) - firewall problems?

    I am using Windows XP Professional 2002 w/ SP3 on a Dell Latitude E4300 laptop wirelessly connecting to my Airport Express 802.11n (firmware 7.5.2).
    I can see my Airport Express in iTunes 10.4.1 and can select it via the Airplay button. iTunes even detects whether or not a speaker is connected to the Airport Express. But when iTunes tries to connect, it comes back after a while saying "An error occurred while connecting to the Airplay device xxx. An unknown error occurred (error -15000)."
    A similar problem happens with Airfoil from Rogue Amoeba that I use to stream music from other apps such as VideoLAN to Airport Express on the same laptop. I can see that my Airport Express is available but when Airfoil tries to connect, it comes back saying "It appears that a firewall on this computer is preventing Airfoil from connecting to xxx Airport Express. Please check your firewall settings and try again."
    I've set both Airplay and iTunes as exception programs in my Windows Firewall setting, and even added TCP ports 5000 to 5005 and UDP ports 6000 to 6005 to the exceptions as recommended by Airfoil. I've also disabled Symantec Endpoint Protection that Ihave installed. The only thing I can't disable is McAfee Endpoint Encryption, since I also use the laptop at work and I don't have permission to disableMcAfee.  I use this laptop to connect wirelessly with other devices such as HP wireless printers, NAS drives and other laptops on my home network and have never had any issues, so i think that this issue is specific to the Airplay software being blocked by some firewall (I am assuming Airfoil also uses Airplay).
    I've tried this on different wireless networks and I have the same issue with Windows XP on my Dell Latitude E4300. I've also set up the network with no security, but the problem doesn't go away.
    I also tried downgrading iTunes to 10.3.1 but won't work. I think it's an Airplay issue, not a specific iTunes issue, since I'm facing the problem with Airfoil as well.
    How do I trace what is going on that is preventing iTunes and Airfoil from streaming to the AirportExpress within Windows XP?
    I also have another Dell Inspiron laptop on the same network running on Windows Vista, and have no problems streaming music from iTunes or Airfoil to the Airport Express on the same network, even when the network is WPA-2 Personal (TKIP+AES) protected (I've seen other postings where WPA has been an issue, WEP has not, but in my case, this is not an issue). Ditto with my iPad2.
    Thanks for your help!

    I have the same problem with Windows 7 64bit. ITune can see AE and stream Music well. Airfoil, TuneBlade (airplay soft) can also see AE but can't connect and stream music. I ' ve already tried to setup firewall Exception list, even turning off firewall off both windows and antivirus but still got the same problem with the message 'Airfoil was unable to connect to the remote speaker " ... 's Airport Express". Please check the firewall on the computer where " ...'s Airport Express" is running and try again'. Any help would be appreciated !.

  • Apple TV can see iTunes library but can't load content (intermittently)

    I have intermittently been experiencing an issue where the Apple TV shows my iTunes library, but when I select it, no artwork appears for any of the categories (Music, Movies, etc.)  If I select a category, it says it is loading, but never does. It shows the loading page for an extended period of time.
    Connectivity otherwise seems fine. My iPhone/iPad remote apps still find the Apple TV, although they can not select my iMac library separately to play content through the Apple TV the way they should be able to, even though they see the library. My iMac and Apple TV are both connected by ethernet. I use an AirPort Extreme as the router, but the Apple TV has a wired connection through that router. My network/router situation has been pretty solid. I had (different) issues with my 1st gen Apple TV and as part of the troubleshooting for that totally reworked our setup and gave the computer and Apple TV both a wired connection. It didn't help that problem and I don't think it's related here.
    I tried closing and re-opening iTunes, turning on and off home sharing including not pressing "done" as people here have suggested for other issues, and rebooting the computer. I tried with a MacBook Pro also, and I have the same isue. When this happens, it affects the iTunes libraries on both computers. Finally I reset the router and rebooted the Apple TV itself. It then started working again. I'm not sure which of those helped since I did them at the same time.
    Once when this happened to my husband, he just gave up, and several hours later (presumably after the Apple TV and iMac had both gone to sleep and woken up), it worked again without rebooting or resetting anything.
    Message was edited by: medgirl (to add router information)

    Hi All,
    Same issue here. Just upgraded (?) from the previous version of Apple TV, to the new Apple TV2. Like others here, my main problems seem to be with unreliable streaming from iTunes 10 on my PowerMac (Quad G5, Leopard OSX).
    My original AppleTV had no issues w/the wireless network, or synching w/my PowerMac.
    The network connection from the ATV2 are fine, and have no issues accessing the Apple Store (for movies, TV shows), or accessing Netflix. The access to the internet from my ATV2 is quite robust.
    My problems are with keeping a constant, reliable wireless connection to my PowerMac, via an Airport Extreme wireless router.
    I have tried multiple restarts, reboots, reset ATV2 to original settings, tried different wireless channels on the Airport Extreme, verified I have Home Sharing properly enabled in iTunes,etc, but no luck so far.
    What I'm seeing is when I access my iTunes on my computer, I can see my library, and then if I start to "shuffle songs" I may get 1 to 3 songs to play fine, but then the music stops, and I can no longer access the music/movies/etc in iTunes any longer. When I then go to my PowerMac, it has lost most bars of signal strength on the wireless network (although all other devices show strong signal strength), and I have to Turn AirPort Off, then Turn AirPort On and I then am reconnected to the wireless network with good signal.
    I then go back to the ATV2, connect to my iTunes, start my music, and then 1-2 songs later it again stops playing, and I go through this all over again.
    It seems as though there is something on the wireless network between the ATV2 and my PowerMac that causes it to lose connection, and I have to manually start again. The problem is that the connection is not robust, and only lasts a few minutes.
    Hope this gets solved soon.
    Regards
    Tom

  • How can see my photos?when i press on photos folder,just can see only albums.but can't see pictures

    iam using now i phone 4,  16 gb ..iam new in i phone. i took alot of pictures.but i cannot see any one in photo folder.i can see there just albums.but i cannot open it.if i want see all the pictures,i have to go to camera and want go to camera roll.how can i open in straight away in photo  folder?

    You need to read the iPhone User Guide to learn how to use your phone properly.  I've included the link at the bottom of this reply.
    Photos taken by your iPhone reside in your camera roll.  From there, you need to import them onto your computer for safekeeping.  You can arrange them into albums and THEN synch them back to your photo albums.
    How to do all of this is covered very clearly in the User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Added Mac file to PC formatted ipod-can see data remains, but can't access songs-Can they be recovered?

    I accidentally added a mac file (picture) to a PC formatted iPod.
    My music still shows as being on the iPod. I can see that all of the data still remains on the device, but when I turn on the ipod, it says there is no music. No music is accessible through itunes either.
    I am not sure if I created an extra partition which is being accessed when I turn on the ipod, but I am looking to remove it and go back to using the ipod as I was previously.
    There is a lot of music on the ipod so I was hoping to restore the ipod to it's previous format without having to reinstall the software and delete all of my music.  If anyone has any suggestions, I would greatly appreciate them.

    See doing a restore to factory settings helps
    But it will erase the iPod completely - i.e. you will loss on the songs on your iPod
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”

  • I can see the Thumbnail but can't open the Photo

    I do like iPhoto '08 and the features it offers. My problem is that I can't seem to open the photo after importing. I can see the Thumbnail when I open an event. I click on certain photos and a big white exclamation point appears on a black background. !
    This doesn't happen with all. Just a couple of photos within an event series. Has anybody else had this problem?

    mrmarley
    The ! or ? turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    The most common cause of this is User Activity in the iPhoto Library Folder in the Finder.
    Have you altered, moved or renamed anything in the iPhoto Library Folder?
    If you haven't, then try rebuilding the database. Hold down the apple and option (or alt) keys and launch iPhoto. Use the resulting dialogue to rebuild.
    Regards
    TD

  • Yahoo. When I try to open my mail I can see the folds but can't open the individual mail.

    I see the folder with empty displayed on the right but I can't open the mail.

    Do it manually to see if Encore works... export MPEG2-DVD from PPro (if for a DVD, or appropriate assets for HiDef) and then import the 2 (audio and video) files into Encore for authoring
    Run as Administrator http://forums.adobe.com/thread/969395 fixes some problems
    Specific to CS4, you must update the Roxio component, especially with Win8
    http://forums.adobe.com/thread/1309029
    http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download
    Dynamic Link Problems... and a possible fix http://forums.adobe.com/thread/1325281

  • Can See Wireless Network, But Can't Connect

    I am able to see the linksys wireless network under my wireless options, but when I try to connect, it says there was an error joining the network. I have been able to connect before with no problem. Two other wireless enabled computers in my house are able to connect to the network, but not mine. If I plug into the ethernet port on the wireless router, I can get internet. I've already tried the instructions from the "Getting Association (signal strength), but no Internet access" article, but nothing changed. Also I've upgraded the firmware and restarted both the router and my computer, but nothing helped. I don't know of anything that I did to my computer from the day it was working to the day to the day it stop working. I have Mac OS 10.4 fyi. Does anyone have any other suggestions? Is it my computer that is the problem or the router?

    After you upgrade the firmware in the router, you must reset the router to factory defaults, then setup the router again from scratch.  If you saved a router configuration file, DO NOT use it.
    Also, in the non-working computer, temporarily turn off your software firewall, and see it this helps.

  • HT4759 Suddenly my icloud (on PC) won't recognize my keyboard "tab" button; and I can see my email, but can't click on it. I have firefox 18.0 browser.

    I have an HP with firefox browser and icloud.com was working fine on it until last week.  I first noticed that I couldn't use my tab on the keyboard to get from the login name to password, but wasn't too concerned until I got into email and couldn't click on anything.  I can't read my emails at all in icloud now (on the PC).  I did recently forward all other accounts to the my "me.com" account.   I don't know if any of that has to do with it, but my hotmail and any other sites are working fine.  It seems to be a problem with icloud only and it is also happening on my home PC.  

    It was working before on Mozilla.  The problem with IE is that it constantly crashes and we can't get anything done, so we switched to Mozilla a long time ago.   I don't get why this has suddenly become a problem though.  Thanks!

  • MacBook can see wireless network, but can't connect; no error message

    This one has got me stumped: my father has a new D-Link wireless router. His Windows laptop connects to it just fine, but neither of our Apple laptops (an old PowerBook G4 and a brand new MacBook Pro) will connect to it. The network does appear in the Airport menu, but when I select it, nothing happens. It pauses for a second, and then I'm left disconnected from all wireless networks. No error message, no connection, no check appears next to the network's name. No security of any kind is enabled, and I've turned off "n" support on the router. I'm at a loss, and can't seem to find anyone with similar problems. Any ideas?
    The console gives me the following:
    2008/12/27 9:42:40 PM kernel AirPort: Link Down on en1
    2008/12/27 9:42:40 PM kernel AirPort: Link Down on en1
    2008/12/27 9:42:43 PM kernel Auth result for: xx:xx:xx:xx:xx:xx Not Authenticated
    2008/12/27 9:42:43 PM airportd[7585] Error: Apple80211Associate() failed -7
    2008/12/27 9:42:43 PM airportd[7585] Error: processcommanddict() failed
    2008/12/27 9:42:43 PM SystemUIServer[7514] Error: airportd MIG failed = -7 ((null)) (port = 57487)
    2008/12/27 9:42:43 PM SystemUIServer[7514] Error: airportd MIG failed = -7 ((null)) (port = 57487)
    2008/12/27 9:42:46 PM kernel Auth result for: xx:xx:xx:xx:xx:xx Authenticated
    2008/12/27 9:42:46 PM airportd[7585] Error: Apple80211Associate() failed -7
    2008/12/27 9:42:46 PM airportd[7585] Error: processcommanddict() failed

    I've tried that (every time I've changed the D-link settings, and seperately). No dice,

  • Lightroom 5 - I downloaded original purchase 2.14.  After a crash I reloaded today.  I can see the files but can't open. I don't want monthly cloud subscription I want open the program.  Customer Care (no phone support and email are awful)

    Why won't my LR 5 open?

    I have described the whole issue here.  It seems like there is NO support unless I buy a subscription. 
    After paying for this CD (Amazon) and I have the serial # .  The files are there but nothing opens. 
    Customer Care on the website is useless!  All it does is go to troubleshooting which didn’t help at all.  That’s how I got to forums. 
    I have WIN 8.  No screen capture, all you see are files/folders.
    Carol

  • HT2500 I have several issues ...I can see my mail but can't open it,

    My computer is doing several things all at once.
    My mail will not open say nothing selected.
    My Face time doesn't open
    My Apple Icon where I go to the App store will not go .
    I have time machine backed up but I don't know how to go retrieve it.

    Are you running 10.9 Mavericks?
    Were the applications working? Do the other Apple supplied programs work? Do you want to solve your problems or restore to an earlier OS?
    To enter Time Machine, go to the icon below in the Dock and click on it.
    Time Machine Basics
    Time Machine FAQ
    Recover your entire system

Maybe you are looking for