Can see Airport Express, but iTunes won't connect and more..

I'm running Mac OSX 10.4.2 on an Aluminium PowerBook G4, connected to an Airport Extreme Base Station - which can use the internet etc easily. I have an Airport Express, which can be seen & changed in Airport Admin, and can be seen in iTunes - but can not be connected to in iTunes - it tries for about 30 seconds, and then gives up, not even an error message? I'm not sure if it's a related issue, buit an old iBook running OSX 10.3.9, connects to the same Airport Express, no problems. But the PowerBook, whilst it can see the iBook, won't connect to the iBook via Airport - it tells me it is not operational, or something.
Can anyone think of anything that may fix the problem?
Thanks in advance.

Is this a new problem on this Powerbook - or has it never worked? While there are many (and some very obscure) causes for this problem, one of the more common causes is firewall software of some sort. This also includes applications designed to monitor outgoing network data (like spyware) on a Mac, like "Little Snitch".

Similar Messages

  • ITunes (and Airfoil) can see Airport Express but can't connect in Windows XP (error -15000) - firewall problems?

    I am using Windows XP Professional 2002 w/ SP3 on a Dell Latitude E4300 laptop wirelessly connecting to my Airport Express 802.11n (firmware 7.5.2).
    I can see my Airport Express in iTunes 10.4.1 and can select it via the Airplay button. iTunes even detects whether or not a speaker is connected to the Airport Express. But when iTunes tries to connect, it comes back after a while saying "An error occurred while connecting to the Airplay device xxx. An unknown error occurred (error -15000)."
    A similar problem happens with Airfoil from Rogue Amoeba that I use to stream music from other apps such as VideoLAN to Airport Express on the same laptop. I can see that my Airport Express is available but when Airfoil tries to connect, it comes back saying "It appears that a firewall on this computer is preventing Airfoil from connecting to xxx Airport Express. Please check your firewall settings and try again."
    I've set both Airplay and iTunes as exception programs in my Windows Firewall setting, and even added TCP ports 5000 to 5005 and UDP ports 6000 to 6005 to the exceptions as recommended by Airfoil. I've also disabled Symantec Endpoint Protection that Ihave installed. The only thing I can't disable is McAfee Endpoint Encryption, since I also use the laptop at work and I don't have permission to disableMcAfee.  I use this laptop to connect wirelessly with other devices such as HP wireless printers, NAS drives and other laptops on my home network and have never had any issues, so i think that this issue is specific to the Airplay software being blocked by some firewall (I am assuming Airfoil also uses Airplay).
    I've tried this on different wireless networks and I have the same issue with Windows XP on my Dell Latitude E4300. I've also set up the network with no security, but the problem doesn't go away.
    I also tried downgrading iTunes to 10.3.1 but won't work. I think it's an Airplay issue, not a specific iTunes issue, since I'm facing the problem with Airfoil as well.
    How do I trace what is going on that is preventing iTunes and Airfoil from streaming to the AirportExpress within Windows XP?
    I also have another Dell Inspiron laptop on the same network running on Windows Vista, and have no problems streaming music from iTunes or Airfoil to the Airport Express on the same network, even when the network is WPA-2 Personal (TKIP+AES) protected (I've seen other postings where WPA has been an issue, WEP has not, but in my case, this is not an issue). Ditto with my iPad2.
    Thanks for your help!

    I have the same problem with Windows 7 64bit. ITune can see AE and stream Music well. Airfoil, TuneBlade (airplay soft) can also see AE but can't connect and stream music. I ' ve already tried to setup firewall Exception list, even turning off firewall off both windows and antivirus but still got the same problem with the message 'Airfoil was unable to connect to the remote speaker " ... 's Airport Express". Please check the firewall on the computer where " ...'s Airport Express" is running and try again'. Any help would be appreciated !.

  • I accidentally dropped macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!

    I accidentally dropped my friend's macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!
    I tried to turn it off and it didn't work... and I held on to the shift key too and it still doesn't work..
    Please help me..

    Accidental damage is not covered under Apple warranty.  And it seems there is much accidental damage.  Only a Genius Bar tech looking at it can tell how much it will cost to repair.
    Cost to repair will be high, I suspect (though Genius Bar will confirm/deny.
    There is no gentle way to say this sir/ma'am ... someone will need to pay for your friend's MBA repairs.

  • My ipod touch was submerged in water and now it is telling me to connect to itunes, but itunes won't connect until i put the passcode in my ipod, and i can't do anything with my ipod until it connects. what should i do?

    my ipod touch was submerged in water and now it is telling me to connect to itunes, but itunes won't connect until i put in the passcode, and i can't do anything to my ipod until it connects to itunes. so, basically i can't do anything from the ipod or to it from the computor. what should i do?

    Restore...
    From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.
    There's more to try but let's go a bit at a time.

  • I purchased a song and it shows up in the song list with an exclamation point on the sie of it.  It says the song could not be found.  I have done a search and can't find it but iTunes won't let me download or buy it again.  Help!!

    I purchased a song on iTunes and it shows up in the song list with an exclamation point on the side of it.  It says the song could not be found.  I have done a search and can't find it but iTunes won't let me download or buy it again.  Help!!

    Hello levon10
    Just delete the song and then go through the process of downloading the purchase again.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • My project in imovie says source unavailable after I moved the events to the backup drive. It is connected and shows up in the events library. I can see the pictures but they won't play without the source. What do I do.

    My project in imovie says source unavailable after I moved the events to the backup drive. It is connected and shows up in the events library. I can see the pictures but they won't play without the source. What do I do.

    I moved it because I did not have room on my hard drive to import my latest video. I take videos my grandkids basketball games then edit them as projects. I don't have room to move the whole events library back to my hard drive. Can I move part of it at a time.
    I filled up my 1 TB back up drive so got a 3TB to move my video projects to. Do I have to move both the i photo videos and the projects to the 3 TB drive together some how. When can I delete them off the hard drive .
    I moved all the i photo library to the 3 TB drive and deleted them out of i photo. That is 87 GB which I don't have room for on my hard drive.
    I think when I use the export movie to my hard drive it works but will I still be able to edit it later if I want. Is it best to do quick time or i tunes if I use the export feature.

  • AP Utility 5.4.1 doesn't see my AirPort Express but iTunes 8.0.2.20 does

    I have 2 AEs connected on a wired lan on Win XP. The new version of the AirPort Utility (5.4.1) can't find them but iTunes 8.0.2.20 does see them. I can also ping them using a net utility to find the IP addresses.
    Is this a known problem? To which previous version of the AirPort Utility should I revert and where do I find it?

    The Airport Express is quite old, i've had it for many years, not sure how long, probably first or second generation. It says it's model A1084, 2005.
    This would be an 802.11g AirPort Express base station. There is only one generation of this version.
    When i click on the icon in the Airport Utility, it says this version of Airport Utility (v.3.6.1) doesn't support this base station.
    I'm not aware that Apple produced a v3.6.1. Did you mean v5.6.1 instead? If so this version is meant to administer these older 802.11g AirPorts on Macs running OS X Leopard or Snow Leopard. More precisely for versions 10.5.7 thru 10.6.8 ... so your MacBook should be able to run this version of the AirPort Utility.
    I played music through the external speakers as recently as a couple of weeks ago, both in iTunes and on You Tube.
    If you are streaming from YouTube, then you must be using a third-party solution like Rogue Amoeba's Airfoil. Is this correct?
    The only thing that has happened recently, though i don't know why it would make any difference, is that a few days ago for the first time, i did a backup of my hard drive to the Time Capsule, using Time Machine.
    You're right. That should have not made any difference as far as streaming goes.

  • Can the airport express be used to stream music and act as network "extender" at the same time?

    I have a time capsule as my base station but need to improve network coverage in the other end of the house. Have a new airport express that I use for music streaming. Can this airport express be used for both music streaming and "network extension" at the same time, or do I need to buy another product?

    Yes, it can. You can either:
    Extend a wireless network. The Express needs to be positioned half way between the TC and the area without network coverage, and can be flakey. This is wireless only.
    Use Ethernet/Powerline. This is the preferred option (called a roaming network in Apple terminology). This allows for the Express to be placed wherever you want, as long as it reaches the other end of the house.

  • I can't see airport express after iTunes re-install

    Hey you Windows guys, my daughter uninstalled iTunes by accident.  When I reinstalled it, I can't see the Airport Express (AE) any more.  It also doesn't show up in the Airport Utility.  This is what I've done to troubleshoot and more info:
    Windows 7 - 64 bit
    Latest iTunes and utility install.
    Status light is green on the AE.
    I can access the AE from the utility software if I manually enter the IP address.
    My firewall is enabled for private and public on the follow services (iTunes, Airport Utility, Bonjour)
    All ports have access in firewall
    I can see the AE if I turn off the firewall
    So based on the last point, I'm assuming it's a firewall issue but I'm at a loss for any of trouble shooting options.
    Any help would

    OK, just some further basics, I've also tried all the resets (Soft, Hard, Factory) on the AE and still not showing up.
    Any ideas out there?

  • Airport Admin Utility can see my AE, but Itunes can't

    I have two AEs, one connected to the Internet the other in a far off bedroom. I want music only (no internet) in the bedroom. When I turn on the computer in the bedroom, itunes cannot see the BEDROOM Airport Express. The only way I can do it is to go into the room with Internet access which is my "main" airport express (call it OFFICE) and then walk back into the bedroom.
    When I get back to the bedroom, itunes is able to see the BEDROOM airport express and use it. If I close the lid of the computer or shut it off, the next time I want to play music I need to go through this sequence. Airport Admin can see the BEDROOM AE but itunes doesn't list it as a speaker and displays a message about "BEDROOM Speakers are Unavailable, use Computer" (unless I go back to the OFFICE first to refresh it). I'ver tried re-booting, re-starting itunes, scanning, robustness, channels etc.
    I just want to power on the Mac in the bedroom from scratch and have itunes see and use the Airport Express there that it already sees in Admin Utility.

    Good tip! Didn't know about that. I'm at work right now, but will try it later tonight. Any other suggestions for me?
    Connect to Server should be able to find the disk if it's on the Airport? I tried doing something similar with Disk Utility, but the AirDisk didn't show up in its sidebar. I mean, the Airport Utility knows it's there, and I have verified that the drive is good with a wired connection.
    Additional info: We had a power outage last night, after power was back I powercycled everything and ran AirPort Utility, which prompted me to upgrade to 7.1.1. I did. Now I can't see the disk.
    This used to happen once in awhile, but was always rectified by soft-resetting the AEBS and restarting the MacBook. Now even after doing that and downgrading to 7.1 firmware, I'm still having no luck.

  • Itune on iMac cannot connect to Airport Express, but Itune on XP can

    Hello
    I've the following situation:
    Itune cannot see the Airport Express unless my Iphone Remote controle is connected to Itune. And eventhough, Itune fails to connect to it.
    Here is the environment of my network
    1) third party LAN/Wireless router (connected to the internet)
    2) iMac (10.4.11) connected via the LAN port to the router
    3) Airport Express (7.3.2) connected to the wireless network
    4) one Iphone connected to the wireless network
    5) one XP computer connected to the wireless network
    6) All devices are in the same subnet
    What really puzzle me is that Itune on the XP laptop can broadcast music to the Airport Express without any issue. But Itune on the Mac does not see at all the Airport Express unless I connect my Iphone to Itune. When I do so, the Airport Express become listed in the status bar of Itune. But if I try to make Itune connect to it, it try for a while then it stop trying without any error message.
    I really don't understand what is going on. Does any body can give my a bit more information how Itune and Airport Express communicate? Or have any idea where I should direct my troubleshooting?
    Thanks in advance for any help

    So did i screw something up last night when i connected using my PC?
    That sounds likely. Maybe the security type or password?
    And if so how do i re-set the link with my mac??
    Try the options described on pp. 30-33 of http://manuals.info.apple.com/enUS/AirPort_Express_SetupGuide.pdf
    Once you get things working again, suggest you save the settings in a profile. In future when you bring the PC home, create a different profile for experimentation. Switch back to the usual profile when you're done with the PC. Eventually, you should be able to develop one profile that works with both machines.

  • Xp home can't see airport express in itunes

    thank you for reading this and your help
    i have a xp home edition that can not see any airport expresses on my network. i can access them via ping, or the airport tool by using the other option and putting the airports ip address in there - i do not see it via the tool alone.
    also, itunes does not see the speakers
    any ideas. thank you for your assistance

    If you want all computers and devices to talk to each other, you much put them into one subnet (like this: 10.0.1.xxx). The function for handing out these IP addresses and make sure there is no conflict is called the DHCP server. Therefore, you should only have one DHCP server on one subnet. If you have one AE BS and one AX BS, the second AX BS must have the DHCP turn off so it will only act as a bridge. Or the second AX BS can be configured just as a client so it will receive the IP from the main AE.
    Once every device on your subnet has a correct unique IP address, iTune will be able to find your AX speakers, and your don't need to know the IP address of the AX.
    Message was edited by: dchao99

  • Windows 7 - iTunes doesn't see AirPort Express but AirPort Utility does..

    iTunes 10.1.1.4 running on Windows 7 can not detect my AirPort Express with 7.5.2 firmware. My iPod Touch running on the same wireless router detects and will play music through the AirPort Express.
    iTunes preferences are set to detect remotes (iPod Remote works to control iTunes) and the AirPort Express. Also verified that the Windows 7 firewall is set to all Bonjour to pass all UDP ports on home networks.
    Need some help getting iTunes 10 to detect the AirPort Express...

    I have since done a reset to factory condition and tried again and it seems to be working now. I unplugged it from the power held down the reset button and plugged it back in continuing to hold down the reset. I think you have to hold it down for nearly 10 seconds until the light flashes green 4 times and then release the button. Then try scanning for it again. It still took a little longer than I expected for it to find it after that but once it did I have not had any more problems.
    At least with it; my sister is on windows and that is another story!

  • IPad or iPhone can't see Airport Express but Mac can.

    Both iOS devices are on v8.1.3.
    My Mac can see the Airport Express and send music to it.

    The article linked below details a number of troubleshooting steps that can help get AirPlay to work correctly from your iOS devices.
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
    http://support.apple.com/en-us/TS4215
    All my best,
    Allen

  • ITunes 7 - Airport Express not visible, won't connect to remote speakers

    I upgraded to iTunes 7, and now my Aiport Express does not show up when I open either the Aiport Admin Utility, or the Airport Express Assistant. The remote speakers I have do not show up in iTunes. Evenything worked perfectly on the previous version of iTunes. Anyone have any idea?
    My wireless LAN (which is enabled through the Airport Express) is still working fine.
    Thanks!

    hmmmmm.
    i'm not trying to get rid of you here, but it might be worth also checking-in/reposting over at the Airport for Windows forum. when Airtunes things get sticky, i generally defer to iFelix or RJ in WI, and they spend a lot more time over there than they do here.
    (traffic is so heavy in here at the moment that this thread might be buried out of sight before an AirTunes guru gets to see you.)
    here's a link through to the Airport for Windows forum:
    Airport for Windows

Maybe you are looking for

  • How do I make itunes blind to my ipod?

    so,...I have this fifth gen 30 gig ipod that I took to my local apple store where they determined that the reason why I could never get itunes to read its mp3 contents was a hardware problem. They said that they are gonna send me a replacement. So no

  • What is the BIOS Password on my Satellite A100-376?

    Hello! Yesterday I made a BIOS update of my Toshiba Satellite A100-376 (PSAAR) to version 5.90-WIN. Everything went ok but now when I'am trying to enter BIOS Setup by pressing F2 in start, the BIOS ask me for a password but I don't know what it is be

  • Sorting music by genres

    Hello! I don't understand the way music sorts in my iPhone. I bought Concert for George in iTunes and if I choose "Genres" in iTunes on my iMac it looks fine - it is one album as it has to be: But the same album looks like separate songs on my iPhone

  • How to send program output as  mail in HTML format

    Hi Friends, I have a BDc which runs in background and its been Stored in my system and displayed as HTML format. My requirement is now i want that Same HTML file which i am displaying to be sent as a mail in HTML format itself..Kindly help me on this

  • Update version CO 000 for controlling area

    Hi Experts, I need to update the values for CO versión 000 for a new controlling area created in the system. In order to do that I tried to customize in Project System--> Costs --> Create CO Versions. In the tables I choose version 0 but, when access