Can see internet but cannot see modem

I have several machines and printers in my house, all of them are in some way - with or without wires - connected to the AEBS. System works great! I recently moved from dial-up (through the AEBS) to WiMAX. What a difference!
While I have many machines in the house, I have reduced the set-up for this testing to the two scenarios presented. Using the Motorola Canopy modem connected via ethernet to PowerBook, I can use the internet and see the modem diagnostics page. Using the Canopy connected to AEBS via ethernet to the WAN port and wireless (802.11) to the PowerBook, I can see the internet but I cannot see the modem diagnostics page. I believe that it has something to do with the way I am setting options in the AEBS (or maybe the PowerBook), but I have not been able to figure it out. Can some-one please help?
Note: While I am using the Motorola Canopy modem, I don't think that matters, I think that any cable or DSL modem would do the same thing.
Thank you,
Greg
Ti Powerbook G4, iBook G4, MacBook, MacMini Intel, iMac DV, B&W G3 Mac OS X (10.4.8)

You question was about a Zyxel modem, but you indicate that you have other equipment...an AirPort Express, Airport Extreme, etc.
Is the Zyxel "modem" your only modem/router?
Or, do you have other Apple routers connected to the Zyxel "modem"?
Changes are, although the Zyxel device may be called a "modem", it is really a gateway....a combination modem and router in one box.
Can you provide the model number of your "modem"?

Similar Messages

Tried to mirror my iPad to the tv and got sound but no picture. Can run videos but cannot see I pad screenshot

Tried to mirror my iPad to the tv and got sound but no picture. Can run videos but cannot see I pad screen. Looked on support and it said touch the mirror button but I have no mirror button. What am I missing

Hi Ginger611,
Welcome to the Apple Support Community!
It sounds like you are trying to mirror your iPad to your TV using an Apple TV but don’t see the mirroring option. Please use the attached article for information on setting up AirPlay Mirroring.
iOS: Use AirPlay Mirroring
Cheers,
Joe

Tried to mirror my iPad to the tv and got sound but no picture. Can run videos but cannot see I pad screen. Looked on support and it said touch the mirror button but I have no mirror button. What am I missing

Tried to mirror my iPad to the tv and got sound but no picture. Can run videos but cannot see I pad screen. Looked on support and it said touch the mirror button but I have no mirror button. What am I missing

Hi Ginger611,
Welcome to the Apple Support Community!
It sounds like you are trying to mirror your iPad to your TV using an Apple TV but don’t see the mirroring option. Please use the attached article for information on setting up AirPlay Mirroring.
iOS: Use AirPlay Mirroring
Cheers,
Joe

I can hear sound but cannot see anything on my iphone

I was deleting apps so I had enough room to run the new update, and the screen just shut off. I can hear when I get phone calls, texts, etc. but cannot see anything. Anyone know how to fix this?

Hi Lorie,
Thanks for using Apple Support Communities. If folks are reporting that they can't hear you when on calls, I would try the steps in this article:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Cheers,
- Ari

Vpn client can access internet but cannot access internal network

I am using PIX 501 to setup a VPN. At first the VPN client cannot access the internet once they logged in via the Cisco system vpn client, so i enable split tunneling. Now the VPN client can access the internet but they can't access the internal network.Due to the limited characters can be posted here, only necessary IOS coding is posted on the next message. Who knows how to solve this problem? Pls Help.....

enable password ********** encrypted
passwd ********** encrypted
hostname Firewall
domain-name aqswdefrgt.com.sg
access-list 100 permit ip 192.168.1.0 255.255.255.0 192.168.50.0 255.255.255.0
access-list nat permit tcp any host 65.165.123.142 eq smtp
access-list nat permit tcp any host 65.165.123.142 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq smtp
access-list nat permit tcp any host 65.165.123.143 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq www
access-list nat permit tcp any host 65.165.123.152 eq smtp
access-list nat permit tcp any host 65.165.123.152 eq pop3
access-list nat permit tcp any host 65.165.123.152 eq www
access-list nat permit tcp any host 65.165.123.143 eq https
access-list nat permit icmp any any
ip address outside 65.165.123.4 255.255.255.240
ip address inside 192.168.1.2 255.255.255.0
ip verify reverse-path interface outside
ip local pool clientpool 192.168.50.1-192.168.50.50
global (outside) 1 interface
nat (inside) 0 access-list 100
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp 65.165.123.142 smtp 192.168.1.56 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.142 pop3 192.168.1.56 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 smtp 192.168.1.55 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 pop3 192.168.1.55 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 www 192.168.1.55 www netmask 255.255.255
.255 0 0
static (inside,outside) tcp 65.165.123.152 smtp 192.168.1.76 smtp netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 pop3 192.168.1.76 pop3 netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 www 192.168.1.76 www netmask 255.255.25
5.255 0 0
static (inside,outside) tcp 65.165.123.143 https 192.168.1.55 https netmask 255.255
.255.255 0 0
access-group nat in interface outside
route outside 0.0.0.0 0.0.0.0 65.165.123.1 1
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa-server plexus protocol radius
aaa-server plexus (inside) host 192.168.1.55 ******** timeout 5
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map cisco 1 set transform-set myset
crypto map dyn-map 20 ipsec-isakmp dynamic cisco
crypto map dyn-map client authentication plexus
crypto map dyn-map interface outside
isakmp enable outside
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
isakmp policy 40 authentication pre-share
isakmp policy 40 encryption 3des
isakmp policy 40 hash md5
isakmp policy 40 group 2
isakmp policy 40 lifetime 86400
vpngroup vpn3000 address-pool clientpool
vpngroup vpn3000 dns-server 192.168.1.55
vpngroup vpn3000 wins-server 192.168.1.55
vpngroup vpn3000 default-domain aqswdefrgt.com.sg
vpngroup vpn3000 idle-time 1800
vpngroup vpn3000 password ********
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80

Can GET email but cannot SEE individual messages!

When I check my Verizon business email I see them in the inbox but when I click the messages I cannot READ any of them!

HenryTew2 wrote:
When I check my Verizon business email I see them in the inbox but when I click the messages I cannot READ any of them!
What kind of device, computer, operating system?

Can hear video but cannot see it? How do I resolve this?

Why can't I watch certain videos on my laptop? I can see thse on my iPad just fine.
This is one of the videos I cannot watch on my Laptop:
http://www.nbc.com/saturday-night-live/video/obama-mandela-cold-open/n44342/

Well, since the iPad doesn't use Flash (it's incompatible with iOS), the video is probably HTML5... or you're using SkyFire on the iPad, and it uses "Server side" rendering fo Flash content if the video ISN'T HMTL5.
Usually, video problems are caused by outdated or corrupted video drivers. Check them and update if necessary: http://forums.adobe.com/thread/945765

Blank white screen - can hear it but cannot see it!

hi wondered if anyone can help I have had my iphone for 4 weeks and when the battery went dead i had plugged it in to re-charge. On doing so the phone has just frozen ona white screen. I have tried turning it on and off and i can hear when messages arrive but i can see nothing.
it has frozen, help!!! thanks katy

Katy,
That happened to my iPhone once. It seems that a connector had come loose. No amount of resets or restores would help. It required a trip to my local Apple Retail Store where they replaced the screen and had me on my way in 10 minutes at no charge.
Make an appointment before you go in: http://www.apple.com/retail/geniusbar/

HT2486 I am sending an email to a group which I have created in my contacts. I would like to hide the list of people's emails but cannot see how I can do that. Can anyone help please?

I am trying to send an email to a group which I have created in my contacts. I would like to hide the list of email addresses but cannot see how to do this. Can anyone help please?

Thank you for your message.
I can see how you do that when using the 'normal' emailing system from my mailing box, but not when working from the contact application (the 'book' on the bottom icon bar with the @ on it)....

How do I gift a playlist made of half my own songs and half chosen songs to be purchased? I have tried to find the 'arrow to the right' of the playlist when I select it but cannot see this at all! Can anyone help?

How do I gift a playlist made of half my own songs and half chosen songs to be purchased? I have tried to find the 'arrow to the right' of the playlist when I select it but cannot see this at all! Can anyone help?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards.

Downloaded Mt Lion Yesterday and my Tool bar has disappeared. I can still access the individual tools but cannot see my header. I used 'help' and did what it suggested. slected 'hide tool bar' and then 'show toolbar'. I also restarted etc.

Downloaded Mt Lion Yesterday and my Tool bar has disappeared. I can still access the individual tools but cannot see my header. I used 'help' and did what it suggested. slected 'hide tool bar' and then 'show toolbar'. I also restarted etc.

Good point BDAqua, the Escape key helps get me back to reality in Lion.
While I've only dabbled around a little in Lion since it's release (I upgraded a 10.6 Clone to Lion on one of my FireWire Drives) now I'm currently downloading Mountain Lion (to upgrade a Clone of that Lion Clone) so that now I can continue to move forward in madness.
P.S. Trust me, I'm not laughing.

I can see myself and hear the other person while attempting to connect to face time but cannot see them

New iPhone 4S. Attempting to use face time but it wont show the person I am attempting to connect with. I can see myself and hear the other person while attempting to connect to face time but cannot see them. Face time was working before.

Hello Wollyt
Check out the article below for troubleshooting FaceTime issue.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT1766 I backed up my iphone 3GS using itunes 10. on 27/12 and today 29/12 and would like to restore using 27/12 backup but cannot see option to choose that backup nor can I now see that backup.

I backed my iphone 3GS on 27/12 and did a synchronization today with itunes 10.. which automatically did a backup prior to carrying out the synch. I have just realised that I have lost my music as my music setting is defaulting to "selected playlist, artists, albums, and genres" and I am trying to restore using the backup I carried out on 27/12 but cannot see the option to choose that backup. When I right-click the device and choose restore from backup, there are two iphone names - admin iphone and admin iphone 29th Dec 11:14 and statement underneath - Last backed up today 11:34.
To restore I selected admin iphone and restore - should I have selected admin iphone 29th Dec?
Where can I find the backup I carried out on 27th and how can I use it to restore to it?
ta

Thanks for the info. No problem as I can sync my music to my iphone anyway - it is still available on my music library on itunes - did not want to sync entire library as it is massive now and for my ipod classic.
Other question - is it safe to update my iphone software to version 6.0.1 which keeps being prompted each time I connect my jailbroken 3GS iphone on itunes. I cannot install nor update a number of apps such as whats app, some games which I used to have on my iphone as each time I try to update or re-install, I am informed that I need IOS 4.3 or above.
thanks

I have iCloud successfully set up my Mac and iPhone iPad. Mac will not transfer to my other devices. Other devices transfer successfully. I have checked my iCloud setting on my Mac, but cannot see a problem. Can you help me?

I have iCloud successfully set up my Mac and iPhone iPad. Mac will not transfer to my other devices. Other devices transfer successfully. I have checked my iCloud setting on my Mac, but cannot see a problem. Can you help me?

If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

USB port on wrt610n i can see the drive but cannot see the content

USB port on wrt610n i can see the drive but cannot see the content
I have followed the instructions I see the drive but when I try to acess the drive I get a empty new folder
help I am lostwhat should i do

winmaco wrote:
Yes i have it is working on my PC
One thing in setting up the usb I had to use a different password
my router has a password and the only way I could move forward was to use the default admin admin user name and password
I could not use my router user name and password.
The username and password for the share on your attached drive can be anything you want them to be. I assume you set up a share on the attached drive? That's where you need to add a password for the share, although for ease of use I never did assign a password to the shares.
You do know that the firmware for the Storage Link is buggy, right? File size limitations as well as file corruption issues? Connectivity issues also rise up, with the only workaround that I have found is a script that you have to run every time you boot up your computer. As far as I can see the Storage Link function is a poorly implemented idea. No firmware in sight to fix the issues, and no idea of when.

Can see internet but cannot see modem

Similar Messages

Maybe you are looking for