Can see the site if I use link visit

After publishing the site I can see it if I click visit... but if I type the name of website www.imagesofnormandy.com into say google it comes up as a mac error....what is going wrong? I'm now 4 hours trying to get this resolved!! Short of remaking the whole site I don't know what to do... thank you

You probably need to go to the place where you have your personal name and make sure that it still has the correct info about where to point it.
It should probably be pointed at:
http://web.mac.com/normandybeaches
By the way, you have probably chosen the worst possible name to give your site inside the iweb app (http%3A_web.mac.com_normandybeaches_www.imagesofnormandy.comhome.html). If I were you, I would change this to something short and simple like "ion", republish, and reupload.

Similar Messages

  • I lost my tool bar on top. I no longer can see the Bookmarks, Tools, or Help links. Where are they and how can I reset them? I had them at first but now I don't see them.

    I lost the tool bar on top. I can no longer see the Bookmarks, Tools, or Help links. I had them in when I began with your browser but now they're gone. How do I restore the default toolbar?

    * In Firefox 3.6 versions on Windows and Firefox 4 on Windows and Linux it's possible to hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu of a toolbar.
    * Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
    * Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
    See also:
    * [[Menu bar is missing]]
    * http://kb.mozillazine.org/Toolbar_customization

  • I've bought the domain, everything is set up correctly, but I can't see the site on the net! Help!

    I recently purchased a .ca domain, and own Snow Leopard server running on a mac mini. I set up the site, load it, and enter all the proper information into the server software. If I look at the web using Safari running on the server machine, I can see the site, no problem. The problem is is that no other machine can apparently see the site. As far as I can tell, the DNS settings are correct, the web settings are correct and everything is running and all the proper checkmarks are checkmarked.
    Any ideas? What might I have missed turning on?
    Michael Dlugos

    What devices — server-grade gateways, routers, low-grade NAT-only boxes — are located between your OS X Server box server and the Internet?
    ...This device can control what connections reach your server.
    Do you have a static IP connection and a server tier of service configuration with your ISP, or are you attempting to use a residential/dynamic IP address for your server?
    ...Various ISPs can and variously do block in-bound server-oriented connections and protocols — such as HTTP/80 and HTTPS/443 connections — from their lower tiers of service.
    What OS X or OS X Server version are you using? 
    ...Web services management does differ across the recent OS X Server versions.

  • Hello, i use premiere pro cc and i would like to uplaod my sequence in speedgrade with direct link but it's not available. I can see the option but it's not clickable, somebody knows why ?

    Hello, i use premiere pro cc and i would like to upload my sequence in speedgrade with direct link but it's not available. I can see the option but it's not clickable, somebody knows why ?

    Oh i'm not sure they are on same, i downloaded speedgrade this morning and i didn't upgraded premiere so it's maybe this ! thanks i will try it and let you know

  • I used to be able to open a second tab to get to another web site without closing the first one....now I can see the second tab but when I click on it nothing happens...

    I used to be able to open a second tab to get to another web site without closing the first one...now I can see the second tab but when I click on it, nothing happens..

    This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    Your system details show that toolbar in the user agent as AskTbARCD/3.13.1.18107
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Valid users can see a site, but not the document libraries they have permissions for

    Hello everybody,
    at a customer's site, there is SharePoint Foundation 2013 SP1 running, bound to both http and https. Seeminlgy out of nothing, a strange behavior occurred: Visting
    http://intranet/subsite showed the page headers (logo, global navigation etc.), but no content. The welcome text was missing as well as the links to the document libraries which should appear in the left navigation.
    After explicitely adding http://intranet as an alternate name (https://intranet was active only, don't know why), we can again reach content via http. Still strange appears, that
    http://intranet global navigation links get redirected to https (fine, but unexpected). If we change a deep link to a document library from https to http in the browser's address bar, we can reach the content fine.
    However, one problem still exists: This site gets published via TMG 2010 via https, and that also worked just fine for many months. But now, I can try what I want in TMG, valid authenticated users see only the top navigation, but no content at all.
    Can anyone give me a hint about what to check? Of course, I will provide any info you may need.
    Best Regards, Stefan Falk

    Hello Daniel,
    Thank you for your response. As to your questions:
    I just added http://intranet to the alternate access mappings of the intranet zone and did not extend a website.
    Besides SharePoint Central Administration, there is no other SharePoint web site collection on this server, and no other non-SharePoint-IIS-Site. This is a VM for nothing else than hosting this single intranet site collection.
    We do see the same issue under two sub-websites underneath
    http://intranet, namely http://intranet/Datenaustausch and
    http://intranet/Protokolle. In both sub-sites, there is some welcome text on the home page and there are several document libraries, each with permissions not interited, but explicitely granted to specific users.
    The first (solved) issue was, that we could not see the document libraries when using http, but could see them using https. This was solved by adding the alternate access mapping for
    http://intranet explicitely.
    We can successfully browse the sites (using http and https now) from the internal network. The one issue left is that the same does not work through TMG, that is, coming from the external network, we can see and call up the sites in a browser, but not any
    content in them. We do see the site title and logo, and the global navigation at the top of the page, but we do not see the welcome text, nor the document libraries. This did work last week, and we do not know nor could find, why it stopped working. The issue
    persists regardless of whether we use bridging to https or to http between TMG and SharePoint.
    We have already restarted the SharePoint box, with no success.
    If I can provide any further information needed, I will be glad to do so.
    Best Regards, Stefan Falk

  • Extended router's network for Airport extreme. Works well with MacbookPro. I can print with notebook with XP SP3 and, I can see the USB-harddisc in the Airport service program but, I cannot use it. I have set filesharing etc. What do I do wrong?

    I connected the Airport Extreme wireless to the existing network of my router. At the Airport there is connected via USB a Printer and three hard discs. All works well on my MacBook Pro - I can print and use the hard discs. On my notebook and my desktop, both with XP-SP3 I can use the printer only. In the Airport service program - manual set up - hard discs I can see the drives with the correct names but I cannot work with it. I don't find neithe the Airport Extreme nor the drives in the Windows Explorer. Of course I've set 'filesharing' etc. What do I do wrong? Where is the mistake in the set up?

    apikoros wrote:
    The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
    1)  I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access.  But do I have to  change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
    Resetting the password you will need to do for each device... the utility cannot even see those old units.
    So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
    2)  Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
    N.Korean hackers.
    [Edit] Whoops-- one more question:  I want to partition the TC's disk, but Disk Utility doesn't see it.  What do I need to do?
    You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
    Look at Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

  • Availability checking - How Avail check can see the Reservat linked to a SO

    Hii there,
    We have the following issue. When we create a Sales Order, we want to reserve the stock so that when another Sales Order for the same material is created, the standard Material Availability check will know the 1st SO has x amount of stock already reserved.
    We are running the standard BAPI - BAPI_MATERIAL_AVAILABILITY and using the Availabilty checking rule assinged in the Material Master and the Scope of check from Transaction OPJJ, but we are not able to force the Avail Check to acknowledge the Reservation created for the Sales Order.
    The standard Reservation check on the Scope of check is only for manually created Material Reservations but we are creating ours linked to a Sales Order (movement ype 231) and although you can see the Reservation in the RESB table, the Avail check does not take this reservation into consideration.
    Any ideas would be greatly appreciated.
    Thanks.
    Owen

    When we create a Sales Order, we want to reserve the stock
    1)  Go to material master and check what availability check is maintained.  Most probably, it should have been 02
    2)  Next go to OVZ9, select the combination 02 => A and execute.  There tick the box for "Include sales reqmts". and save
    3)  Now create a sale order and update the forum how it works
    thanks
    G. Lakshmipathi

  • I used Finder to organise my iMovie events into folders. In iMovie I can see the folders but the software says there are no events present. What can i do?

    I used Finder to organise my iMovie events into folders. In iMovie I can see the folders but the software says there are no events in the folders. What can I do to rectify?

    Very carefully use Finder to move the Events back to the top level of the Movies/iMovie Events folder. iMovie will not see them if they are nested in Folders.
    If they are on an external drive, move them to the iMovie Events folder at the top level of the drive.
    However, you can put iMovie projects in folders if you want.
    It is best to do all moves and renames in iMovie so you do not destroy the links in your Projects. However, you need to move your events back to where they were in the Finder sonce iMovie cannot see them.

  • I would like to use time Machine to back up to a network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it

    I currently have a mini server (OSX10.8.5, server 2.2.2) that I am using Time Machine to back up 4 external drives that are connected to the server via firewire 800. I would like to use Time Machine to back up to a windows network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it for use.
    Can this be done
    Thanks for any and all help

    The supported targets for Time Machine backups are local (direct-connected) disks, and network targets include Time Capsule, a disk hanging off the current-generation AirPort (though not earlier AirPort devices), and OS X Server systems.
    The Time Machine storage is based on the HFS+ file system, so I would not expect TM to work with SMB file services.
    While there are hacks to allow Time Machine to access network drives, I would not consider those to be reliable. Skim the forum and the 'net for related details, and for previous discussions of setting this up and the related issues that can arise.
    Remember to test the recovery with whatever you decide to use; whole point of backups is the ability to restore the data, after all.
    If you want to learn more about Time Machine, Pondini is an excellent resource.

  • When I use Home sharing, I can see the library I want to copy, but when I highlight the library, the import button does not show up. Also, it will not let me drop and drag. How do I get music from one computer to the other computer?

    When I use Home Sharing, I can see the library I want to copy under Shared, but I can't get it save on the computer under the regular library. I go to edit and "select all" but there is no import button that is in the right hand corner. Also, it will not let me click and drag the music. How do I get it from one computer to the other?

    Since both computers are connected via the network, you could simply copy the ENTIRE iTunes folder from one computer to another via the network.
    If both computers are running Windows, use the Easy File Transfer Utility built into Windows to move iTunes and all other user media/data.

  • TS1629 How do I use home sharing with direct TV / Verizon internet. I have turned on Home sharing on apple tv and in iTunes but can't see the library in apple tv. I can see the photo stream but thats it. Any Ideas????

    How do I use home sharing with direct TV / Verizon internet. I have turned on Home sharing on apple tv and in iTunes but can't see the library in apple tv. I can see the photo stream but thats it. Any Ideas????

    go to home-sharing on Apple TV and type in your info as ask.
    hope this help

  • I just purchased Time Capsule today.  I ONLY want to use it as an external drive.  I do not need it for Time Machine. I can see the TC in my finder, but when I click on a file or video to drag and drop, I get message that TC can't be modified. Help please

    I just purchased Time Capsule today.  I ONLY want to use it as an external drive.  I do not need it for Time Machine. I need to free up room on my computer. As of now, I can't even load updates. I can see the TC in my finder, but when I click on a file or video to drag and drop, I get message that TC can't be modified. Help please!

    I agree with Kappy.. passing files and especially via wireless is slow as slow.
    Just need to be sure your TC is the new AC model??
    And the OS on the computer is Lion?
    Have you completed the setup of the TC via the utility? You do still need to get internet via the TC so it has to be plugged into the main router..
    Give us the full picture of the network.
    Then we can help you get into it.. whether you should put your files on it is another question.

  • I have Adove Reader XI. All my files have a picture as the first page. I used to be able to see the picture for each file. Now all I see is the PDF logo. How can I change this so I can see the pictures instead of the logo?

    I have Adobe Reader XI. All my files have a picture on the first page. I used to be able to see that picture but now I can only see the PDF logo. How can I change that so I can see the pictures instead of the logo?

    Windows 7

  • Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?

    Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

Maybe you are looking for