Can Siri work with only wifi without installing SIM card in it?
Can Siri work with only WiFi without installing SIM card in the iPhone 4S?
I am seeking to use the siri from my newly bought iPhone from USA where i am staying here for vacation around 2 months . I will be installing the SIM card not in USA , where iwill be back home 2 months from now. Can it work with only wifi on it
Similar Messages
-
why can't i pick up any wifi networks? wifi capabilities still work on iphones, even without a SIM card-yes or no?
No one here can know why for certain, and yes.
If no change after resetting network settings on your iPhone and after restoring your iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem with the wireless card or something else. -
I'm getting an ipad mini wifi cellular, can i use this just on wifi without any sim cards?
I'm getting an ipad mini wifi cellular, can i use this just on wifi without any sim cards?
Yes you do not need a Sim card for it to use Wi-fi
-
Can you track an iphone 5s without a sim card
I was wondering if you can still track an iphone 5s without a sim card installed.
if it has access to wifi then yes.
-
Can you unlock an iphone 4 without a sim card?
Can you unlock an iphone 4 without a sim
card?What are you referring to in regards to unlocking. Are you talking about unlocking the screen with a passcode, or unlocking the device from the carrier the phone is locked to?
If you are referring to unlocking the phone from the carrier so it can be used with other carriers, you need to make contact with the carrier it is locked to and ask if they offer unlocking services and if you qualify for the unlock. They will provide you with instructions on what to do after that. -
How to connect my ipad mini wifi without a SIM card
How do I connect my ipad mini cellular to wifi without a sim card
If it says there is no sim card installed it either can't find one physcially, or the card moved and lost contact or has failed. A new sim card can be obtained form your Mum's cell/mobile carrier if needed easily.
However this is irrelevant to whether or not the iPad can join a Wifi network. Its 2 different things.
For now ignore the Sim card message and just try to connect to her Wifi network. It is independent and should function regarldess of the sim card status. -
Can you start a iPhone 4S without a SIM card? Because mine is arriving next week.
Can you start a iphone4s without a SIM card? Because mine is arriving next week.
Turning an iPhone or any phone for that matter on has nothing to do with a SIM being installed.
All iPhones require a SIM card for activation. The SIM does not need to be active, but it must be from the carrier the device is locked to. -
HT4972 can i get the ios update without a sim card on a iphone 3gs?
because i just downloaded it on my iphone 3gs and when downloaded it , it tells youto put your language the your country then it takes you to wifi and i just wanted to know if i can download this without a sim card??
No, you must have a SIM card in the phone to restore our update it. The card does not have to be a currently active card, however.
-
Can I use the unlocked 3GS without a SIM card?
I am one of the few (I guess) who refuse to pay for a data plan, but still want a capable iOS device that fits in my pocket. With no updates and aging specs, the iPod touch is not the option I hoped it would be.
So, what I'm wondering, is if I buy the 3GS Unlocked from the Apple store for $375, can I use it as an iPhone without the phone if I don't put a SIM card in it? Yes, I understand it will not function as a phone.
I basically want an iPod toch with GPS, a better camera, and a better processor... will the 3GS Unlocked be able to function in that capacity if I never activate it on any network, or does it require a SIM card to even "turn on"?The current iPod Touch is basically an iPhone 4 without the phone feature, see here: http://www.everymac.com/systems/apple/ipod/specs/ipod-touch-4th-gen-4g-facetime- specs.html.
If if you would go for an iPhone 3GS, it would not be more powerful than the current iPod Touch. -
Will an unlocked iPhone 4S work with both CDMA and GSM SIM cards?
I was using the iPhone 4S with a GSM sim card all these years here in India and would like to switch to a CDMA carrier.
Does the phone work with both SIM cards? Or is there a separate model which works with CDMA?
Appreciate all replies.
Thank You!Hey varun0809,
It sounds like you have a question about the specifications of your specific model of iPhone 4s. Here is an article for you that should be able to help you answer these questions:
iPhone 4S - Technical Specifications
http://support.apple.com/kb/sp643
Cellular and Wireless
World phone
UMTS/HSDPA/HSUPA (850, 900, 1900, 2100 MHz);
GSM/EDGE (850, 900, 1800, 1900 MHz)
CDMA EV-DO Rev. A (800, 1900 MHz)3
802.11b/g/n Wi-Fi (802.11n 2.4GHz only)
Bluetooth 4.0 wireless technology
1GB = 1 billion bytes; actual formatted capacity less.
Actual size and weight vary by configuration and manufacturing process.
CDMA available only if iPhone 4S is sold and activated for use on a CDMA network.
All battery claims depend on network configuration and many other factors; actual results will vary. Battery has limited recharge cycles and may eventually need to be replaced by Apple service provider. Battery life and charge cycles vary by use and settings. See www.apple.com/batteries and www.apple.com/iphone/battery for more information.
Wireless broadband recommended; fees may apply
Some features, applications, and services are not available in all areas. See your carrier for details. Application availability and pricing are subject to change.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
Leaopard 10.5.1 - can't work with the os x install cd - please help
Hey guys...
I have a Power Mac G5 Dual. I want to re-install my settings, specific files and so on... I don't want to delete everything and re-install. I want to keep my current user, with it's programs, folders and so on.. I know that you're to use the os x cd, and press special under the installation and choose something where you still can keep your user..... However I can't do that: every time I restart my Power Mac and it starts of from the Cd, I choose a language but when i press next, it says: cannot opdate to v10.5 on your computer..
Why does it say that? I just want to keep my user, but not delete and re-installl everything!!
Help please : )FreakOutBoy wrote:
Hey guys...
I have a Power Mac G5 Dual. I want to re-install my settings, specific files and so on... I don't want to delete everything and re-install. I want to keep my current user, with it's programs, folders and so on.. I know that you're to use the os x cd, and press special under the installation and choose something where you still can keep your user..... However I can't do that: every time I restart my Power Mac and it starts of from the Cd, I choose a language but when i press next, it says: cannot opdate to v10.5 on your computer..
Why does it say that? I just want to keep my user, but not delete and re-installl everything!!
Help please : )
Welcome to the Apple forums:
If you are trying to do a standard update to Leopard and you are already running Leopard, you have to choose the archive and install. The standard upgrade is only from Tiger or lower to Leopard.
After the language screen, at the lower left, I believe, is an "Options" button. Click it and select archive and install.
This should keep all your present settings, but I would caution you that you shuold NOT do anything unless you have a full backup of your present system.
You did not specify why you want to reinstall Leopard. Maybe you do not need to do a complete reinstall if you would post your problems.
Again, don't do anything unless you have a current backup either with TM or CarbonCopy. -
Can RAC work with only 1 node "temporarly"?
Hi
I have 2 nodes RAC , when node2 is off , node1 can't start , its crs hang
is that normal , is that the design of RAC , and if that correct , so if node2 have an outage , should node1 be able to serve the appliation alone ?!
Thanksand when i start rac2 , the crs on rac1 works and it works on rac2 as well
here is the log of ocssd.log on rac1 after i started rac2
[ CSSD]2009-09-06 14:50:41.984 [3019697040] >TRACE: clssnmRcfgMgrThread: Local Join
[ CSSD]2009-09-06 15:17:51.524 [61832080] >TRACE: clssnmReadDskHeartbeat: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 144596742, wrtcnt, 1252711, LATS 963874, lastSeqNo 1252711, timestamp 1252214274/4294298960
[ CSSD]2009-09-06 15:17:53.205 [131464080] >TRACE: clssnmConnComplete: MSGSRC 2, type 5, node 2, flags 0x0001, con 0x98eae78, probe (nil), nodekillsz 0
[ CSSD]2009-09-06 15:17:53.205 [131464080] >TRACE: clssnmConnComplete: node 2, rac2, con(0x98eae78), probcon((nil)), ninfcon((nil)), node unique 1252214272, prev unique 0, msg unique 1252214272 node state 0
[ CSSD]2009-09-06 15:17:53.206 [131464080] >TRACE: clssnmsendConnAck: node 2, node state 0
[ CSSD]2009-09-06 15:17:53.206 [131464080] >TRACE: clssnmSendConnAck: connected to node 2 , ninfcon (0x98eae78), state (0)
[ CSSD]2009-09-06 15:17:53.206 [131464080] >TRACE: clssnmConnComplete: connecting to node 2 (con 0x98eae78), ninfcon (0x98eae78), state (0)
[ CSSD]2009-09-06 15:17:53.206 [131464080] >TRACE: clssnmConnComplete: ninf->killinfosz 0
[ CSSD]2009-09-06 15:17:53.681 [61832080] >TRACE: clssnmReadDskHeartbeat: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 144596742, wrtcnt, 1252712, LATS 966024, lastSeqNo 1252712, timestamp 1252214276/4294300300
[ CSSD]2009-09-06 15:17:55.953 [61832080] >TRACE: clssnmReadDskHeartbeat: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 144596742, wrtcnt, 1252713, LATS 968294, lastSeqNo 1252713, timestamp 1252214278/4294302220
[ CSSD]2009-09-06 15:33:47.231 [61832080] >TRACE: clssnmReadDskHeartbeat: node 3, rac3, has a disk HB, but no network HB, DHB has rcfg 144596742, wrtcnt, 58771, LATS 1919434, lastSeqNo 58771, timestamp 1252215232/4294269600
[ CSSD]2009-09-06 15:33:48.141 [3019697040] >WARNING: clssnmLocalJoinEvent: takeover succ
[ CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmDoSyncUpdate: Initiating sync 0
[ CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmDoSyncUpdate: diskTimeout set to (29997000)ms
[ CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetupAckWait: Ack message type (11)
[ CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetupAckWait: node(1) is ALIVE
[ CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetupAckWait: node(2) is ALIVE
[ CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Incarnation 0
[ CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Node 1 incarnation 144596742
[ CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Node 2 incarnation 144596742
[ CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Node 3 incarnation 144596742
[ CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Incarnation set to 144596743
[ CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSendSync: syncSeqNo(144596743)
[ CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmWaitForAcks: Ack message type(11), ackCount(2)
[ CSSD]2009-09-06 15:33:48.142 [131464080] >TRACE: clssnmHandleSync: diskTimeout set to (29997000)ms
[ CSSD]2009-09-06 15:33:48.142 [131464080] >TRACE: clssnmHandleSync: Acknowledging sync: src[1] srcName[rac1] seq[1] sync[144596743]
[ CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmWaitForAcks: done, msg type(11)
[ CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmNeedConfReq: No configuration to change
[ CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmDoSyncUpdate: node(1) is transitioning from joining state to active state
[ CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmDoSyncUpdate: node(2) is transitioning from joining state to active state
[ CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmSetupAckWait: Ack message type (13)
[ CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmSetupAckWait: node(1) is ACTIVE
[ CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmSetupAckWait: node(2) is ACTIVE
[ CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmSendVote: syncSeqNo(144596743)
[ CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmWaitForAcks: Ack message type(13), ackCount(2)
[ CSSD]2009-09-06 15:33:48.143 [131464080] >TRACE: clssnmSendVoteInfo: node(1) syncSeqNo(144596743)
[ CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmWaitForAcks: done, msg type(13)
[ CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmCheckDskInfo: Checking disk info...
[ CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmCheckDskInfo: diskTimeout set to (29997000)ms
[ CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmEvict: Start
[ CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmWaitOnEvictions: Start
[ CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmSetupAckWait: Ack message type (15)
[ CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmSetupAckWait: node(1) is ACTIVE
[ CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmSetupAckWait: node(2) is ACTIVE
[ CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmSendUpdate: syncSeqNo(144596743)
[ CSSD]2009-09-06 15:33:48.150 [3019697040] >TRACE: clssnmWaitForAcks: Ack message type(15), ackCount(2)
[ CSSD]2009-09-06 15:33:48.150 [131464080] >TRACE: clssnmUpdateNodeState: node 0, state (0/0) unique (0/0) prevConuni(0) birth (0/0) (old/new)
[ CSSD]2009-09-06 15:33:48.151 [131464080] >TRACE: clssnmUpdateNodeState: node 1, state (2/3) unique (1252212629/1252212629) prevConuni(0) birth (144596743/144596743) (old/new)
[ CSSD]2009-09-06 15:33:48.151 [131464080] >TRACE: clssnmUpdateNodeState: node 2, state (2/3) unique (1252214272/1252214272) prevConuni(0) birth (144596743/144596743) (old/new)
[ CSSD]2009-09-06 15:33:48.151 [131464080] >TRACE: clssnmUpdateNodeState: node 3, state (0/0) unique (0/0) prevConuni(0) birth (0/0) (old/new)
[ CSSD]2009-09-06 15:33:48.237 [3086318064] >USER: NMEVENT_SUSPEND [00][00][00][00]
[ CSSD]2009-09-06 15:33:51.312 [131464080] >TRACE: clssscInitSAGEFencing: kgzf fence initialization successfully started
[ CSSD]2009-09-06 15:33:51.312 [131464080] >USER: clssnmHandleUpdate: SYNC(144596743) from node(1) completed
[ CSSD]2009-09-06 15:33:51.312 [131464080] >USER: clssnmHandleUpdate: NODE 1 (rac1) IS ACTIVE MEMBER OF CLUSTER
[ CSSD]2009-09-06 15:33:51.312 [131464080] >USER: clssnmHandleUpdate: NODE 2 (rac2) IS ACTIVE MEMBER OF CLUSTER
[ CSSD]2009-09-06 15:33:51.312 [131464080] >TRACE: clssnmHandleUpdate: diskTimeout set to (29997000)ms
[ CSSD]2009-09-06 15:33:51.312 [131464080] >WARNING: CLSSNMCTX_NODEDB_UNLOCK: lock held for 3170 ms
[ CSSD]2009-09-06 15:33:51.321 [3019697040] >TRACE: clssnmWaitForAcks: done, msg type(15)
[ CSSD]2009-09-06 15:33:51.522 [131464080] >TRACE: clssnmConnComplete: MSGSRC 3, type 5, node 3, flags 0x0001, con 0x97d53f8, probe (nil), nodekillsz 0
[ CSSD]2009-09-06 15:33:51.523 [131464080] >TRACE: clssnmConnComplete: node 3, rac3, con(0x97d53f8), probcon((nil)), ninfcon((nil)), node unique 1252215231, prev unique 0, msg unique 1252215231 node state 0
[ CSSD]2009-09-06 15:33:51.524 [131464080] >TRACE: clssnmsendConnAck: node 3, node state 0
[ CSSD]2009-09-06 15:33:51.524 [131464080] >TRACE: clssnmSendConnAck: connected to node 3 , ninfcon (0x97d53f8), state (0)
[ CSSD]2009-09-06 15:33:51.524 [131464080] >TRACE: clssnmConnComplete: connecting to node 3 (con 0x97d53f8), ninfcon (0x97d53f8), state (0)
[ CSSD]2009-09-06 15:33:51.524 [131464080] >TRACE: clssnmConnComplete: ninf->killinfosz 0
[ CSSD]2009-09-06 15:33:53.021 [3019697040] >TRACE: clssnmDoSyncUpdate: Sync 0 complete!
[ CSSD]2009-09-06 15:33:53.027 [2988227472] >TRACE: clssgmReconfigThread: started for reconfig (144596743)
[ CSSD]2009-09-06 15:33:53.027 [2988227472] >TRACE: KGZF: context successfully initialized, API version 1.1
[ CSSD]2009-09-06 15:33:53.027 [2988227472] >TRACE: clssscSAGEInitFenceCompl: kgzf fence initialization successfully completed
[ CSSD]2009-09-06 15:33:53.027 [2988227472] >USER: NMEVENT_RECONFIG [00][00][00][06]
[ CSSD]2009-09-06 15:33:53.027 [2988227472] >TRACE: clssgmEstablishConnections: 2 nodes in cluster incarn 144596743
[ CSSD]2009-09-06 15:33:53.236 [3051432848] >TRACE: clssgmInitialRecv: (0x97d0798) accepted a new connection from node 2 born at 144596743 active (2, 2), vers (11,1,1,2)
[ CSSD]2009-09-06 15:33:53.236 [3051432848] >TRACE: clssgmInitialRecv: conns done (2/2)
[ CSSD]2009-09-06 15:33:53.237 [2988227472] >TRACE: clssgmEstablishMasterNode: MASTER for 144596743 is node(1) birth(144596743)
[ CSSD]2009-09-06 15:33:53.237 [2988227472] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
[ CSSD]2009-09-06 15:33:53.237 [2988227472] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
[ CSSD]2009-09-06 15:33:53.237 [2988227472] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
[ CSSD]CLSS-3000: reconfiguration successful, incarnation 144596743 with 2 nodes
[ CSSD]CLSS-3001: local node number 1, master node number 1
[ CSSD]2009-09-06 15:33:53.387 [2988227472] >TRACE: clssgmReconfigThread: completed for reconfig(144596743), with status(1)
[ CSSD]2009-09-06 15:33:53.435 [156081040] >TRACE: clsc_event_hndlr: (0x98365f8) answer error, rc 15
[ CSSD]2009-09-06 15:33:53.436 [156081040] >TRACE: clsc_event_hndlr: (0x98365f8) answer error, rc 15
[ CSSD]2009-09-06 15:33:55.124 [156081040] >TRACE: clssgmCommonAddMember: clsomon joined (1/0x1000000/#CSS_CLSSOMON)
[ CSSD]2009-09-06 15:33:56.891 [131464080] >TRACE: clssnmHandleSync: diskTimeout set to (29997000)ms
[ CSSD]2009-09-06 15:33:56.891 [131464080] >TRACE: clssnmHandleSync: Acknowledging sync: src[2] srcName[rac2] seq[1] sync[144596744]
[ CSSD]2009-09-06 15:33:56.893 [3019697040] >TRACE: clssnmRcfgMgrThread: initial lastleader(2) unique(1252214272)
[ CSSD]2009-09-06 15:33:56.893 [3086318064] >USER: NMEVENT_SUSPEND [00][00][00][06]
[ CSSD]2009-09-06 15:33:57.006 [131464080] >TRACE: clssnmSendVoteInfo: node(2) syncSeqNo(144596744)
[ CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmUpdateNodeState: node 0, state (0/0) unique (0/0) prevConuni(0) birth (0/0) (old/new)
[ CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmUpdateNodeState: node 1, state (3/3) unique (1252212629/1252212629) prevConuni(0) birth (144596743/144596743) (old/new)
[ CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmUpdateNodeState: node 2, state (3/3) unique (1252214272/1252214272) prevConuni(0) birth (144596743/144596743) (old/new)
[ CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmUpdateNodeState: node 3, state (1/3) unique (1252215231/1252215231) prevConuni(0) birth (0/144596744) (old/new)
[ CSSD]2009-09-06 15:33:57.129 [131464080] >USER: clssnmHandleUpdate: SYNC(144596744) from node(2) completed
[ CSSD]2009-09-06 15:33:57.129 [131464080] >USER: clssnmHandleUpdate: NODE 1 (rac1) IS ACTIVE MEMBER OF CLUSTER
[ CSSD]2009-09-06 15:33:57.129 [131464080] >USER: clssnmHandleUpdate: NODE 2 (rac2) IS ACTIVE MEMBER OF CLUSTER
[ CSSD]2009-09-06 15:33:57.129 [131464080] >USER: clssnmHandleUpdate: NODE 3 (rac3) IS ACTIVE MEMBER OF CLUSTER
[ CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmHandleUpdate: diskTimeout set to (29997000)ms
[ CSSD]2009-09-06 15:33:57.130 [2988227472] >TRACE: clssgmReconfigThread: started for reconfig (144596744)
[ CSSD]2009-09-06 15:33:57.130 [2988227472] >USER: NMEVENT_RECONFIG [00][00][00][0e]
[ CSSD]2009-09-06 15:33:57.131 [2988227472] >TRACE: clssgmEstablishConnections: 3 nodes in cluster incarn 144596744
[ CSSD]2009-09-06 15:33:59.759 [3051432848] >TRACE: clssgmInitialRecv: (0x9900bb0) accepted a new connection from node 3 born at 144596744 active (3, 3), vers (11,1,1,2)
[ CSSD]2009-09-06 15:33:59.759 [3051432848] >TRACE: clssgmInitialRecv: conns done (3/3)
[ CSSD]2009-09-06 15:33:59.760 [2988227472] >TRACE: clssgmEstablishMasterNode: MASTER for 144596744 is node(1) birth(144596743)
[ CSSD]2009-09-06 15:33:59.760 [2988227472] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
[ CSSD]2009-09-06 15:33:59.795 [2988227472] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
[ CSSD]CLSS-3000: reconfiguration successful, incarnation 144596744 with 3 nodes
[ CSSD]CLSS-3001: local node number 1, master node number 1
[ CSSD]2009-09-06 15:34:00.200 [2988227472] >TRACE: clssgmReconfigThread: completed for reconfig(144596744), with status(1)
Thanks -
How can I use a iPhone 4 without the sim card slot on Walmart family mobile?
The Verizon iPhone 4 is a CDMA only phone. It is not physically possible to use it on a GSM network. It doesn't have the right parts. Also, we can't discuss jailbreaking here.
Best of luck. -
Dear Sir: Yesterday on 18.09.2014 evening, I wanted to install
IOS 8.0 according to your instructions iPhone 5S.during installation
Stopped working and was closd, I can not work with him. Ibought it in
the United States
Apple Store Fifth 40venue 767 New York NY1053
iPhone 5s Spase Gray 32 gb verizon.
Part Number: ME344ll / A.
Serial number: DN*******NjM.
Model A1533. I would like to request a new password for opening the
iPhone. Passwod..... Thank you very much,
Im not difficult for you to request a quick answer.Israel.
<Personal Information Edited By Host>We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - it looks like somebody has asked the hosts to remove your personal info from your post (it's not a good idea to post any personal info on any public forum).
What do you 'stopped working and was closed, I can not work with him' ? What exactly are you seeing on the phone's screen ?
If it's the activation screen and you can't remember your password for your account then see if you can get it reset via http://iforgot.apple.com -
How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?
You need Lightroom 5.5 or later (the most current version is 5.7.1). This is a free update if you have already purchased an earlier version of Lightroom 5.
Product updates
Maybe you are looking for
-
How can i get adobe flashplayer onto my powerbook g4?
So i have the powebok g4 and i would like to watch youtube videos and other videos and online sites that require an upgrade of adobe flash player. However I cant seem to find out how to do it. I went to Adobe.com it didnt help. Problem i am getting i
-
How to disable a Preview PDF encryption?
I password protected several preview PDF's of mine and I can open them since I set the password; but I want to remove the encryption so they are no longer password protected. . . and I can't. I also can not find any information on this in the Preview
-
My Ipod touch has stopped working all of a sudden. It stopped charging, turngin on etc.....It has frozen twice...Any suggestions? I am out of warranty etc.
-
Hi My company has purchased cc suite, I have had encore running by installing cs6 premiere, unfortunately, I did not see how to keep encore when uninstalling cs6. I don't understand why it is so difficult and complicated to just install encore on its
-
Hi all, I know that it is a fairly complicated matter and I have read almost all online sources on the question but still may be I am missing something. I have written an application for a digital camera which also supports continuous shooting mode(2