Can snippets made in InDesign CS5 be placed in a CS4 document?

Can snippets made in InDesign CS5 be placed in a CS4 document?

Well, that is interesting, but I’m going to guess that the snippets are just a form of IDML so if that’s the case I guess it would make sense.
Bob

Similar Messages

  • Running OS 10.6.8 on a 3.06 GHz Intel Core i3 Mac can I upgrade from Indesign CS5 to CS6?

    Running OS 10.6.8 on a 3.06 GHz Intel Core i3 Mac can I upgrade from Indesign CS5 to CS6?

    They do, but what happens when the client(s) move to CC? Of course doing
    so opens a new can of worms for you since 10.6.8 is unsupported for
    anything later than CS6.
    You should start budgeting for some upgrades sooner rather than later.

  • Can I install Adobe InDesign CS5 on a Power Mac G5 running OS 10.5.8?

    Can I install Adobe InDesign CS5 on a Power Mac G5 running OS 10.5.8?

    first thing to try is reset InDesign:
    delete the preference file located here:
    system > users > home folder > library > peferences > com.adobe.InDesign.plist
    then repair the hard drive:
    shut down the Mac
    restart - then press shift key immediately after the chime
    keep pressing shift untill the Apple logo appears
    let the Mac boot to the desktop - it will take longer to boot as it is repairing the hard drive
    when desktop appears, restart the Mac normally

  • How to center web page made in indesign cs5

    Hi everyone,
    I'm new to this forum and I hope I'll get help, because I need it
    I've made a web page in indesign cs5, exported in SWF and generated HTML.
    My swf file looks good, but my html file is not centered, web page is positioned
    in upper left corner, and I want it to be in the center.
    How can I put it there?
    Thnx very much!
    Hresta

    I know ID is not the best option for a website, but I need it that way.
    I know html/css, but my generated html file contains javascript which
    I'm not familiar with :/
    There's no div so I don't know where to put my auto margins?
    Simply on top of the html file?
    Thnx anyway!!

  • Can't place and Indesign CS5 created swf back in an Indesign CS5 file?

    I hope someone can help me?  I have created an animated swf file in Indesign CS5 using the amination and timing panels, for use in an interactive PDF.  The swf has exported correctly and plays as expected in the browser.  However, when I go to select the swf to place it in my Indesign file its greyed out and unable to be selected. 
    I have basically tried to follow Rufus Deuchler's method to incorporate animations into a PDF http://tv.adobe.com/watch/csinsider-design/indesign-creating-interactive-pdfs-with-page-tu rn-and-flash-animations/. In the video his swf is available for selection when using the place command and everything else I have found on the web talks about importing swf's into indesign files being a standard feature in CS5 and CS5.5. 
    I have tried re exporting the swf by different names and to different folders; quitting Indesign and restarting it; trying to place the swf into a completely different indesign file; going through all the Indesign Preferences to see if there is an option to "turn on" swf import and I have even tried following Rufus's steps and export options exactly when creating the swf.  Nothing has worked. 
    Any help would be greatly appreciated.  I have screen shots and the swf I am trying to import which I can email if that would help anyone ease my growing frustration.
    Cheers
    Pete

    Hi John,
    Thanks for the extra information.  I did as you suggested and downloaded Onyx and rebuilt the launch services database. But only after finding out that my harddrive was corrupted to some extent after both Onyx and Disk Utility found a problem when I verified my Hard Drive.  Anyway I sorted that out, executed the rebuild launch services database via Onyx and unfortunately still no luck with with being able to place a swf in my indesign file.  Very frustrating. 
    The only other thing I thought I would mention is that upon verifying the disk with Onyx it initially presented me with a "Choose Application" dialog box with the question "Where is ARM?" at the top.  I didn't know what this meant and I couldn't find any information on the web so I chose "cancel" and then Onyx went through the verification process without a problem and lauched the Onyx application proper.  I'm clutching at straws now but I was wondering if not selecting an application could have undermined the rebuilding of the LS datatbase?
    Again, and help you or anyone else can provide would be greatly appreciated.
    Thanks

  • Can I upgrade to inDesign CS5 WITHOUT installing Pagemaker 6.5 plus?

    I'm on Windows Vista 64 and I need inDesign CS5. Since Vista won't let me install my Pagemaker 6.5 plus, I was wondering if I can just input the licence from Pagemaker.
    Thanks

    It means that there is more than one upgrade. You can upgrade from earlier versions of InDesign or from Pagemaker. These have the same price but if you buy the InDesign upgrade from earlier versions of InDesign it won't accept your PM serial number.
    You need to buy the correct PM to InDesign upgrade package which will prompt you for a Pagemaker serial number when installing.
    Is that a bit more clear?
    Bob

  • Indesign CS5 Crashes placing Multiple Pics

    Hi
    My name is Danish and i am very frustrated at the moment beacause i have downloaded Indesign CS5 trail from Adobe.I am trying to place multiple pics using the new multple frame tool or watever it is called.
    The Problem is i can place them easily but when i select all my pics and press the FIT TO Frame Propertionally button it always crashes even on the Shortcut which is CTRL+ALT+SHIFT+C.
    When i do one by one it doesnt.Please Adobe and all the guys help me i am very frustrated.
    I am using Windows 7 ultimate 64-bit
    Core i7 950
    12 GB DDR3 Ram
    Plenty of Hardrive Space
    Thanks guy i am counting on you.
    Sincerely
    Danish

    Hi Eugene
    Thank you so much for the reply but unfortunately it did not work. Thanks anyways, any other ideas?? 
    sincerely
    Danish

  • Can my computer run InDesign CS5.5?

    Hi All -- My computer is an Intel Core 2 Quad and I want to add Indesign CS5.5. Will my computer be able to run it?

    As long as it’s not XP you should be fine, but why in the world do you a 64 bit O/S with only 3 gigs of RAM?
    Bob

  • I work in Indesign CS5.5. After saving all documents in indd and open again. Document are not editable now. Whats wrong?

    I have started to work in Indesign CS5.5. Ater saving all my pages in indd and open them again. Now they are not editable what is wrong?

    Are your layers or objects locked? Did you do all the initial editing on your master pages?

  • InDesign CS5.5 freezing upon opening new document Lion 10.7.3?

    Hi there,
    When launching CS5.5 InDesign, I select 'New document'. After it is setup (1-2 seconds), it freezes and InDesign is non functional and you have to force quit.
    My console log states:
    CFURLCreateWithBytes was passed these invalid URLBytes: ‘/Applications/Adobe InDesign CS5.5/Adobe InDesign CS5.5.app/Contents/Frameworks’ (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
    The freeze occurs in the admin account and logged in domain user.
    I have tried updating InDesign- nothing.
    Uninstalling through Adobe uninstaller and reinstalling- nothing.
    Not using plugins. We are using Extensis Universal Type Client but I wuit it and turned off the Core to see if that helps- nothing.
    Ive repair permissions- nothing
    Rebooted- nothing
    I ended up upgrading to CS6 and had no problems. I would like to resolve this CS5.5 issue though. Any help?

    I copied Mac OS: [Startup Disk]/Library/Applications Support/Adobe/SING/Mark II/Datastore to the desktop and deleted it from that directory. Did the same for the Mark II folder (Solution 2)
    -Failing that the first time, I uninstall/reinstall and didnt bother to update, which is why you see the original InDesign. I'll try and update InDesign and move to 10.7.4 to see if that does anything. My
    Mac OS: [Startup Disk]/Library/Applications Support/Adobe/SING/Mark II/Datastore does not currently have these folders because I took them out. Maybe I'll run the crash report again and post it. I have to wait for the designer to finish for the day. I'll update possibly tomorrow.
    Thank you!

  • Can you help with InDesign CS5 index problem?

       This is my first attept at creating an Index. I've pretty much tried everything I can think of to get this index to work properly. I think I might have made some fundamental errors in creating this document. I created a document and not a book. I placed 5 text files without linking them. I thought I could simply use the index panel and enter my words from the toc and front matter and InDesign would find all the occurences in the document. But when I ran the index I got the toc pg numbers and the index pg numbers only, i.e., Illumination vi-225 (p225 being the index pg). So far I have:
    reentered all the index entries to using the "whole document" because I had originally chose "This page" for each entry - that didn't work
    then I threaded the 5 text files thinking that might work - nope!
    then I saved the file as a book and tried using that - that didn't work.
       And yes, I have searched the Adobe CS5 help books, videos, online sites, etc. I'm hoping it's something simple! I would truly appreciate any help with this. Thank you!
       Sue

    You don't have any Shape layers, so you won't have any fill or stroke options.  If you had a rectangle and line layer, you have either deleted them, or caused them to be rasterized.  That would also remove any Fill and Stroke options from the Options bar.
    The 'little camera' at the bottom of the Tool bar, is the Quick mask icon.  Clicking on it toggles between standard and Quick mask modes, like you said.  Clicking on it is exactly the same as hitting the q key.  It has absolutely nothing to do with Shape layers.
    What you need to do now, is regroup.  What exactly are you trying to achieve, and what do you expect to see in your Workspace?  You will have noticed that your workspace is context sensitive.  It automatically changes according to what tools are selected, or what function you are using at any particular time.

  • Trial version of Adobe CC ended, now I can't launch my Indesign CS5?  Help! I have work to do.

    My daughter installed the trial version of Adobe CC, and now that has ended.  It keeps wanting me to purchase a monthly subscription to it, but I don't want to.  How can I get back into my trustee Adobe CS5?

    Step 1 - buy your daughter a computer and tell her to Never, Ever touch your computer again
    Step 2 - I **think** you need to uninstall the Cloud and run the cleaner
    -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
    -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    Step 3 - really NOT sure about this, but I remember one person saying they had to wipe everything Adobe and reinstall their older version after removing the Cloud, since the Cloud manager "took over" and did what you said

  • Can't print from InDesign CS5 under Mountain Lion

    After installing MacOS 10.8 InDesign crashes when I try to open the printer configuration in the printing menu. Acrobat crashes immediately when I want to open the print menu. Photoshop prints fine and PDF export in ID also works as well as printing without changing the former printing  settings.
    In an older discussion I found the hint to delete some language folders in the PPD ressources folder to solve the same problem in CS3 and 4 with Lion. I tried that to but it won't work.
    Any ideas? Thanks in advance

    as well as printing without changing the former printing  settings.
    If changing the print settings crashes ID I wonder if you need to delete and reinstall your printers? Testing CS3 I wasn't able to even open the Print dialog without crashing, so  deleteing the foriegn language PPDs worked
    By default Mountain Lion hides the user Library (you can't see user/Library/Printers). You can get to it via Go>Go to Folder and typing ~/Library

  • InDesign CS5 won't open in CS4

    Upgraded to CS5 InDesign and I was happy with it untill I tried to open some work on CS4 at a clients office and both my printers who run CS4 can no longer seem to open any of my packaged file that I send them, Am I doing something wrong, or is there no longer any backwards compatability, I have noticed that CS5 came with alot of Extentions preinstalled 50% of which seem to be locked. If anyone has any ideas please let me know.
    thanks
    Edit i may have jumped the gun I'm testing a .idml file on CS4 but it's just crashed ID 5 time in a row so....

    There has NEVER been that sort of backward compatibility.
    As always, if you want to open the file in a previous version you must export to interchange format, which for CS5 is .idml. The .idml file can be opened in CS4, but it isn't likely to be perfect, so this is a very poor way to send things to print. There are significant new features which will be lost if used, and differences in the text engines which will cause youtr text to be recomposed, possibly changing line endings which can make oversets or other problems.
    Whay not send the printer a press-ready PDF instead?

  • InDesign CS5: italics missing from imported Word document

    While working on a book, I've come to notice that some italics in the original Word document didn't make it into my InDesign document.
    I'm doing some tests (with different import options) right now but so far I don't understand the logic of it. The missing styles, only italics, can be "real" italic or "faux" italic.
    Before posting the result of my tests, I'd like to know if some of you have encountered the same problem?

    @ Peter Spier: thank you for the script, very useful.
    As you can read below, I'd prefer to avoid importing all the styles from the Word files. When you have 300 Word documents, the cleaning in InDesign can become a tedious task…
    So, I've made some tests, the Word file I'm using comes from my client. In one ¶, a group of words is set in faux italic (typeface Times New Roman) in another ¶, the same group of words is also in faux italic. I guess, since Times New Roman has a true italic, that Word uses the true italic. I can see that from the shape of the one-story "a".
    1. import the original Word document (as received from my client), use a custom Import Option which ""Remove Styles And Formatting From Text And Tables" but "Preserve Local Overrides ". I don't want to get the styles from Words, especially when the sources are diverse but the import has to retain Italic + Bold.
    results: one group appears in roman (typeface Minion Pro Regular) and the other in italic (Minion Pro Italic)!
    2. import the resaved Word document from Word 2011: .doc and .docx, import options unchanged
    results: same as 1.
    3. import the original Word document, use another custom Import Option which "Imports Styles from Word", which I'd rather not do but…
    results: both groups appear in Italic now

Maybe you are looking for