Can Solaris 11 support Solaris 8/9 container?

Dear all,
I am new to Solaris 11. I know that Solaris 10 SPARC can support Solaris 8/9 container.
So, Can Solaris 11 SPARC support Solaris 8/9 container?
Wait for your feedback.
Mike

Hi Mike
For future reference, this may not be the best forum to use for Solaris Zones related questions... but, in this case, legacy branded zones (Solaris 8, Solaris 9, and Linux) are only supported on Solaris 10. This is documented here: http://docs.oracle.com/cd/E23824_01/html/E24456/glhcg.html
John

Similar Messages

Does Oracle 8i or 9i server support solaris X86 platform ?

Can i install the Oracle 8i or 9i server on a intel PIII machine ?
thanks for answer !

I'm sure that Oracle8i server supports Solaris Intel Platform and Oracle9i doesn't support Solaris Intel Platform at this moment as I know.

Can't boot Solaris-10 on NetraX1

I'm trying to upgrade a NetraX1 1GB Ram (Sun Memory) 2x40GB disks over the network. The system is at Solaris-8 and runs it quite well. Trying to boot 10-u8 or even 10-u7 results in the following messages:
Sun Netra X1 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #51330455.
Ethernet address 0:3:ba:f:3d:97, Host ID: 830f3d97.
Executing last command: boot net
Boot device: /pci@1f,0/ethernet@c File and args:
3a000 do_relocate: bad strndx 0
do_relocations: /platform/sun4u/kernel/cpu/sparcv9/SUNW,UltraSPARC-IIe do_relocate failed
krtld: error during initial load/link phase
Fast Data Access MMU Miss
ok .version
Firmware CORE Release 1.0.18 created 2002/5/23 18:22 << Upgraded using patch 111952-03 >>
Release 4.0 Version 18 created 2002/05/23 18:22
cPOST version 1.0.18 created 2002/5/23
CORE 1.0.18 2002/05/23 18:22
I set OBP diags-switch? true with diag-level set to max but no problems are reported.
Sun says the NetraX1 supports Solaris-10 but are there any caveats. It seems strange that the latest version of OBP dates to 2002. Am I trying to 'push a string' by upgrading this machine or am I doing something stupid? Any help/advice would be much appreciated. Note that the Solaris-10-u8 imaged is one I downloaded from Sun and made my own DVD but the 10/08 distribution is genuine Sun media, they both fail with the same messages.

I've tried a few other things like creating the user account in lom and most significantly tried hooking up a DVD reader in place of the second disk. The OBP must not have the driver for reading CD/DVD's as it simply wouldn't recognize the drive although I can if I boot the system from the disk under Solaris-8 and mount the CD/DVD drive.
Is there any possibility that the obp on the machine just can't handle Solaris-10?
I tried booting over the net with a mounted DVD on the host machine and using the -v switch and got the following. Can anyone interpret what's happening here? I've edited out the redundant stuff. The DVD I'm trying to boot from is a genuine Sun made DVD and not a downloaded image.
boot net -v
Res
LOM event: +0h31m3s host reset
etting ...
Sun Netra X1 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #51330455.
Ethernet address 0:3:ba:f:3d:97, Host ID: 830f3d97.
Initializing Memory - (many times)
Executing last command: boot net -v
Boot device: /pci@1f,0/ethernet@c File and args: -v
Using RARP/BOOTPARAMS...
Internet address is: 192.168.1.94
hostname: netrax1
domainname: TheJacks
Found 192.168.1.34 @ 8:0:20:ff:fd:92
root server: ultra10 (192.168.1.34)
root directory: /cdrom/sol_10_1008_sparc/Solaris_10/Tools/Boot
/-module /platform/sun4u/kernel/sparcv9/unix: text at [0x1000000, 0x109fded] data at 0x1800000
module /platform/sun4u/kernel/sparcv9/genunix: text at [0x109fdf0, 0x125f027] data at 0x1869ac0
module /platform/SUNW,UltraAX-i2/kernel/misc/sparcv9/platmod: text at [0x125f028, 0x125f297] data at 0x18c0580
module /platform/sun4u/kernel/cpu/sparcv9/SUNW,UltraSPARC-IIe: text at [0x125f2c0, 0x126c7d7] data at 0x18c0cc0
Evaluating: 70000000000 constant kmem64-base h# 700012ba000 constant kmem64-end h# ffffffffffc00000 constant kmem64-pagemask h# e0000
000618016b6 constant kmem64-template : kmem64-tte ( addr cnum -- false | tte-data true ) if
( addr ) drop false exit then ( false ) dup kmem64-base kmem64-end within if ( addr ) kmem64-pag
emask and ( addr' ) kmem64-base - ( addr' ) kmem64-template +
( tte ) true ( tte true ) else ( addr ) pgmap@
( tte ) dup 0< if true else drop false then ( tte true | false ) then
( tte true | false ) ; ' kmem64-tte is va>tte-data
kmem64-template ?
Error in Fcode execution !!!
Evaluating: to load-base init-program
Undefined word encountered
Fast Data Access MMU Miss
ok

Does WebLogic 6.x support Solaris for Intel x86 platform?

Does WebLogic 6.x support Solaris for Intel x86 platform?
Thanks,
Levi

levi wrote:
Does WebLogic 6.x support Solaris for Intel x86 platform?
Thanks,
See http://edocs.bea.com/wls/platforms/index.html - as far as I
can tell, it is not supported.
regards,
Per Jessen

Can I install Solaris 8 without Swap space?

Can I install Solaris 8 without swap space? or Can I install the swap space on a different hard drive?

Refer Solaris 8 installation guide manuals from this URL:
http://docs.sun.com:80/ab2/coll.214.7/@Ab2CollView?Ab2Lang=C&Ab2Enc=iso-8859-1
Thanks,
Senthilkumar
Developer Technical Support
http://www.sun.com/developers/support

Which 10g release supports Solaris x86 version 10?

Hi,
I downloaded Oracle 10.1.0.3 for Solaris x86. When I installed it, I got error, saying I can only install this version on Solaris 9 x86. Do you have any idea which Oracle 10g version supports Solaris x86 version 10?
Thanks
L

Hi,
If we believe metalink, Oracle 10gR1 is already certified for Solaris x86
Solaris Operating System x86 Version 10
Oracle Database - Enterprise Edition Version 10g
Status: Certified
Certification Note:
Install Information:
o 1. Execute runInstaller with the -ignoreSysPrereqs option.
o 2. Select 'Do not create a starter database' when installing Oracle 10g.
o 3. During installation, the warning message 'SUNWsprox package not installed' can be ignored. Press Continue to resume the installation.
o 4. Download and install patch 4186426 from metalink.oracle.com after installing Oracle 10g software.
o 5. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client.
Have you run installer like recommended in point 1 ?
For 10gR2, you need to wait december for certification.
Nicolas.

Which fortran9 compiler can run on solaris 1.2? or Fortran can migrate fom

Which fortran9 compiler can run on solaris 1.2?Where can I get it?
Fortran can migrate from sparc to x86? all on solaris os. is there any difficulty? any reference?
thanks alot!

Which fortran9 compiler can run on solaris 1.2?Where
can I get it?Please check the support matrix at:
http://developers.sun.com/prodtech/cc/support/support_matrix.jsp
Rose

Does java 1.3 jni support Solaris 2.5.1

I'm having problems loading my user defined classes in JNI version 1.2_4, so I moved to 1.3 but I get the following error when calling JNI_CreateJavaVM
(1.4 does not support Solaris 2.6 so I assume it doesn't support 2.5.1)
# HotSpot Virtual Machine Error, Internal Error
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
I am restricted to Solaris 2.5.1
Thanks
Eric Herrmann
[email protected]

can you switch to smth other than JNI, a socket programming, for instance? I mean, you can always communicate C/C++ to Java through the sockets.

Solaris support AMD

i am new in solaris.
I am trying to installing solaris in my laptop. it have AMD processor and 126 MB RAM
but it's not installing. Is solaris support AMD ?
If I insalling. the CD is talking (booting) .and the first screen is comming. it's stucked there. not going inside?
can u please give me instructuon to this problem
Thanks

Hi,
Make sure u r not using the sparc version Install disk.
Cheers,
Solstice.

Solaris support of Irda,Bluetoth,802.11b

Gentlemen
Autor will buy IBM x20,21 or Toshiba Portege 3480-90CT or Compaq Evo n400c
and install Solaris .
1. What of subnotebbok better suited for Solaris ?
2.Support Solaris today Irda,Bluetoth,802.11b ?
3. If not ,can be drivers acquired from another UNIX derivative ?
Excuse me ,if my request would not relevant.
Please copy to [email protected]

All good, I changed the channel from Automatic to a selected number and that found it no problems!
JH

Solaris Support verification

I want to be sure about the following statements. True or False?
WL5.1 sp6 is does not yet support Solaris 8.
WL5.1 sp6 does support JDK1.2.2_005
WLCS 3.1 does not yet support Solarius 8.
WLCS 3.1 does not yet support JDK1.2.2_005 (it does support 1.2.1_04 w/
patches)
WLCS 3.1 does not yet support Oracle 8.1.6
So...the appserver supports an newer jdk that the commerce server.
Does WLCS 3.1.1 support Oracle 8.1.6, Solaris 8, jdk1.2.2 ?
Lance Smith
X U M A <build-to-order e-business>
160 Pine Street, 2nd Floor
San Francisco, CA 94111
tel: 415.954.7024
fax: 415.777.2704
mailto:[email protected]
http://www.XUMA.com/

I can speak for WLS 5.1. The platform support page for WebLogic Server is
located at:
http://www.weblogic.com/platforms/index.html
This page has the latest and greatest information on the platforms that
WebLogic is certified and supported on.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Lance Smith" <[email protected]> wrote in message
news:[email protected]..
>
I want to be sure about the following statements. True or False?
WL5.1 sp6 is does not yet support Solaris 8.
WL5.1 sp6 does support JDK1.2.2_005
WLCS 3.1 does not yet support Solarius 8.
WLCS 3.1 does not yet support JDK1.2.2_005 (it does support 1.2.1_04 w/
patches)
WLCS 3.1 does not yet support Oracle 8.1.6
So...the appserver supports an newer jdk that the commerce server.
Does WLCS 3.1.1 support Oracle 8.1.6, Solaris 8, jdk1.2.2 ?
Lance Smith
X U M A <build-to-order e-business>
160 Pine Street, 2nd Floor
San Francisco, CA 94111
tel: 415.954.7024
fax: 415.777.2704
mailto:[email protected]
http://www.XUMA.com/

We can't install Solaris 8 - IBM PC SERVER 315

Hello:
We are trying to install Solaris 8 (Intel) (02/02) in an IBM PC Server 315.
Some words about it:
- 128 Mb RAM
- Pentium Pro 200 Mhz
- Adaptec AHA-2940U/2940UW Ultra SCSI in PCI bus1,Slot 4 (Info from Solaris install) (Target 7)
- Hard Disk IBM SCSI (Target 0)
- CD-Rom SCSI IBM CDRM00203 (Target 6 of SCSI) (info from Solaris install)
We have a big problem.
We can't install Solaris from CD.
After Loading kernel , when it begins Searching /dev and /devices...we see this text in the screen repeated a lot of times:
WARNING: /pci@0,0/pci1011,24@2/pci9004,8178@1(adp0):
timeout: abort device, target=6 lun=0
And before this something like it has some problem and begins a resinc ??
Please Could you help us?
Solaris has been purchased from Sun on 12 March 2002
A lot of Thank's!
P.D: Please, excuse my poor English.
A lot of thank's.

two other severs wouldn't run the cd either? Break it down a little it will be more solvable. We will create two separate problems with this. First we will check the cd disk itself. Put in another system and install solaris. If that works, move to the cdrom drive....move it to the same computer you just installed solaris on...if it works then it is another problem.

This domain name can't be used because it contains a protected word or inappropriate language. Please contact support if you feel this is not the case.

we are unable to domain smippl.com it gives error
This domain name can't be used because it contains a protected word or inappropriate language. Please contact support if you feel this is not the case.
It is a real estate company :
SARLA MADAN INFRASTRUCTURE PROJECTS PRIVATE LIMITED
    Address : "SWAYANG TOWER" (STILT FLOOR),
    Plot No. M-73, Madhusudan Nagar, Unit-IV, Bhubaneswar-751001, Odisha,
    India
current email : [email protected]
Domain to setup email in Windows Live outlook express - smippl.com
waiting for solution

Hi,
I wonder if you are registering domain name here:
https://domains.live.com/Signup/SignupDomain.aspx?dn=&ss=0&ctkn=&et=0
If so contact with windows live support:
https://support.live.com/default.aspx?scrx=1
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Solaris 10 08/06 version container within Solaris 10 05/08 global zone

I have the need to run Solaris 8 , Solaris 9 and even Solaris 10 (08/06) containers within my Solaris 10 05/08 global T5120. No problem with the branded Solaris 8 nad Solaris9, but I'm not sure how to create a native Solaris 10 (older version 06) to run on the newer version Solaris 10 05/08. Do I have to create the global zone with the older 06 version of Sol 10? hmm?

The minimum supported version for a 5120 is Solaris 10 8/07.
And they wouldnt say that without a good reason.
Its pretty silly of a software vendor to specify a particular version of Solaris 10.
Unless they mean that version or later.
I mean suppose its certifed for Solaris 10 8/06 and you start with that.
Then you run smpatch and apply all available patches.
What you end up with is virtually indistinguishable from Solaris 10 5/08 anyway.
So unless, they certify a specific version and also specify the set of patches you are allowed to apply.
Then the restriction is virtually meaningless.
Personally I suggest you just go with Solaris 5/08 and be done with it.
As far as I know, theres no way for you to use the "earlier" version without buying new hardware.
The closest you could come is to run it on a solaris 9 zone.

Can I use Solaris with my Home Recording Studio?

Hello,
I am currently building a basic home recording studio. I recently assembled a new computer and will be purchasing music recording equipment very soon. Before I purchase the audio recording gear, I was curious about a few things pertaining to the use of Solaris as my possible choice system.
The data that I store on my hard drives will need to be secure. I had originally considered RAID 5 though recently found out about RAID Z, which appears to be far ahead of the other RAIDs. I am curious to know more about how to set up a RAID Z system.
The computer will be running Solaris, various Linux or BSD, and Windows Vista. I have 500GB x4 hard drives. I am considering separating one and using it strictly for Vista, and using the remaining 3 with a RAID set-up for nix. If I had a choice, I would put much less hard drive space into Vista (capping it at 150 to 200 GB), though I have yet to come across a RAID system that effectively or efficiently cooperates cross-platform. With that in mind, the majority of the remaining 1.5TB can go into my studio OS - hopefully Solaris - while left-over hard drive space is set aside for various other *nix.
I've used Solaris 10 before, though haven't really gone into detail on the mechanics of such features as ZFS, zones, now RAID Z, and the many more amazing features that Solaris provides. Likewise, I am not really familiar with how well the system might operate with software/applications that I could use for recording and composing music.
Beyond the available 2TB (or 1.5TB RAID-ready) space, my computer is running on a new 64-bit quad-core AMD CPU (~2.6GHz) and currently has 4GB 1066MHz RAM. In my search for preparing a computer that suits me for high performance recording - including the editing and mastering of audio - I am attempting to narrow down my options on the software side of things. I have been very satisfied with the general file management of Solaris, though am unsure of how well it might run as the software side of a home recording studio. An additional factor in deciding will be the software's compatbility with audio PCI cards and external recording/audio interfaces. There is always a question of whether or not the necessary drivers, firmware, or similar is available between any given hardware and software components.
Some other *nix options I have considered - "Ubuntu Studio 64-bit" (though it appears to prefer 32-bit) and "64 Studio" (also Debian-based, though appears to be optimized for 64-bit). Some colleagues have used Gentoo with studio applications, though I don't know of any Linux distributions that offer the versatility, power, stability, and efficiency of Solaris for the operating system that it is.
If I use something like "64 Studio", I will have the advantage of a system that is ready-built for studio recording purposes as well as a system that I know is compatible with the sound gear that I am considering purchasing. However, those systems are restricted by their file system types, RAID availability and dependability, and the general disadvantages of using the Linux kernel in general. (I enjoy Linux, though I admittedly prefer Unix over it.)
Can I use Solaris with my home recording studio?
Thank you!
Edited by: the_professor on Nov 9, 2008 6:26 PM
Corrected a typo.
Edited by: the_professor on Nov 9, 2008 6:30 PM
Caught another typo.

I'm not sure what your question is. If you have particular software you want to run, you should see what you can get that package to run under. Sound hw stuff don't tend to be too portable unless it's written on top of OSS (htttp://www.opensound.com). Were I you, I'd consider separating out the storage part and the processing part. Get something like a cheap dell sc440 to be a file server and give the drives to that (unless you actually can get all the components working under solaris).
-r

Can Solaris 11 support Solaris 8/9 container?

Similar Messages

Maybe you are looking for