Can Solution Manager manage all the security for all of our SAP Landscape?

Hello Solman gurus - We're looking at Solution Manager once again. I had installed it for incident management back several years ago during our original go-live - and it fell by the wayside after go-live. My question is related to the latest and greatest version - can it actually to the administration of security roles, profiles, etc. of all of our SAP systems from within Solution Manager?
Much thanks, Ken Little

Sound like Central User Administration to me.....

Similar Messages

What can Solution Manager 7.0 provide for PI 7.1?

I work with PI 7.1 EHP 1 and have been asked to determine if time/resource should be invested to setup Solution Manager 7.0 EHP 1 to provide monitoring/management of PI. I attended SAP TechEd 2011, and there was a lot of discussion that SM 7.1 would be a significant part of monitoring for PI 7.3. However, since I'm not on those platforms, can you help me understand what SM 7.0 can provide me as a PI Administrator/Support over what I use now (Runtime Workbench & SXMB_MONI)?
The Solution Manager resource on the BASIS team mentioned that SM takes a lot of configuration and I'd have to learn about Business Process Management to make it do anything useful. What I saw at TechEd showed a nice start page that showed data volume, errors, and nice graph. Perhaps that is only for SM 7.1, but it seemed like a nice data view capability.

Hello Tadd,
Wily Introscope will provide you with nice (also real-time if you want) metrics for your PI system (dashboards). You can check for some details here:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0b96675-87cf-2c10-b489-dee0ac03f782
Solution Manager requires additional steps in order to be able to configure this monitoring scenario. Once your solution manager is installed and running you have to perform initial configuration -> basic configuration -> managed system configuration
In the last step you'll actually configure diagnostics and willy for your PI system.
If the number of managed systems that you have to connect is small this "3 step" configuration can be done in a couple of weeks.
Cheers,
Diego.

Can Solution Manager do an analysis of Abap Reports of the customer ??

Good evening !!!
The question is: Can Solution Manager do an analysis of Abap reports of the customer ?? This is, solution manager can give me a report with all the Z reports of the customer with their last date of use, utilization level, etc.... ???
Thanks.
Albert

you can do this through your satellite system with ST03N

Solution Manager 4.0 Security

Hi all,
If anybody has experience with the Solution Manager 4.0 Security, could you please share the list of authorization objects used for implementation of Solution Manager for the following scenarios:
1. Implementation & Distribution,
2. Roadmaps,
3. E-Learing,
4. Service Desk,
5. ChaRM (Change Request Management),
6. Solution Monitoring,
7. Diagnostics,
8. Solution Reporting.
I would appreciate your help in this regard.
Thanks

Hi Balaji,
here is a list of roles in solution manager:
http://help.sap.com/saphelp_sm40/helpdata/en/f9/35023b6b33162ee10000000a11402f/content.htm
Hope that helps,
Frank.

Does Solution Manager support Service Report for non-abap?

Does Solution Manager support Service Report for non-abap?
We can schedule and view reports for ABAP but for all the non-ABAP such as J2EE stack (PORTAL) we can not pull out a report.
If the answer is yes please let me know where I can get the documentation of how to setup SLA for PORTAL or non-ABAP.
I found a document on EWA non-abap but non for SLA.

Hi
actually i am in task of setting up ewa for portal.
i had already done with abap components (ewa and sla)
i stronly believe one of the pre-requiste to get sla is EWA.
so i think if u can setup ewa for portal then you can get sla too.
Regards,
Vijay.

Connect Solution Manager to which client for SMD

Hi all,
do I have to connect the solution manager to the productive client of the sat. system?
We have systems with more than one productive client. Can we connect the SDM to more than one client? How can we do this?
Thank you
Timm Funke

Hi,
thank you for this quick response!
So it is possible to configure the landscap with client 000.
Then, when all sat. systems are working fine within SMD, I can configure the producitve clients in smsy (the rfc destinations to the producitve clients). then I can access these clients from SMD.
Is this right?
Kinde regards
Timm

Integrate two Solution Manager to the one

Hello!
I have the following question:
We use at the moment one Solution Manager with the functionality MOPZ and Service Desk. We use the other one Solution Manager mainly for the RZ-Systemmonitoring.
<b>We are about to think, whether it is possible to integrate the both Solution Manager to the new one.</b>
<b>Can some one give a short feedback with advantages/disadvantages and risks.</b>
Thank you very much
regards
Thom

you can do that of course but there is no automatism do do that. You will need to do either configuration of MOPZ again - or re-setup your system to use a different system as CEN.
Markus

Can Solution Manager monitor TIBCO system

Hi there, can solution manager be configured to monitor TIBCO system - such as if certain services is running on TIBCO, check it's file system size, read files and check for Errors...etc?
Cecilia

Hi Craig:
More questions. Would Solution Manager 3.2 or 4.0 be able to do it without the adapter?
Regards
Cecilia

Can anyone plz tell me the steps for performance tuning.

hello friends
what is performance tuning?
can anyone plz tell me the steps for performance tuning.

Hi Kishore, this will help u.
Following are the different tools provided by SAP for performance analysis of an ABAP object
Run time analysis transaction SE30
This transaction gives all the analysis of an ABAP program with respect to the database and the non-database processing.
SQL Trace transaction ST05
The trace list has many lines that are not related to the SELECT statement in the ABAP program. This is because the execution of any ABAP program requires additional administrative SQL calls. To restrict the list output, use the filter introducing the trace list.
The trace list contains different SQL statements simultaneously related to the one SELECT statement in the ABAP program. This is because the R/3 Database Interface - a sophisticated component of the R/3 Application Server - maps every Open SQL statement to one or a series of physical database calls and brings it to execution. This mapping, crucial to R/3s performance, depends on the particular call and database system. For example, the SELECT-ENDSELECT loop on the SPFLI table in our test program is mapped to a sequence PREPARE-OPEN-FETCH of physical calls in an Oracle environment.
The WHERE clause in the trace list's SQL statement is different from the WHERE clause in the ABAP statement. This is because in an R/3 system, a client is a self-contained unit with separate master records and its own set of table data (in commercial, organizational, and technical terms). With ABAP, every Open SQL statement automatically executes within the correct client environment. For this reason, a condition with the actual client code is added to every WHERE clause if a client field is a component of the searched table.
To see a statement's execution plan, just position the cursor on the PREPARE statement and choose Explain SQL. A detailed explanation of the execution plan depends on the database system in use.
Need for performance tuning
In this world of SAP programming, ABAP is the universal language. In most of the projects, the focus is on getting a team of ABAP programmers as soon as possible, handing over the technical specifications to them and asking them to churn out the ABAP programs within the given deadlines.
Often due to this pressure of schedules and deliveries, the main focus of making a efficient program takes a back seat. An efficient ABAP program is one which delivers the required output to the user in a finite time as per the complexity of the program, rather than hearing the comment I put the program to run, have my lunch and come back to check the results.
Leaving aside the hyperbole, a performance optimized ABAP program saves the time of the end user, thus increasing the productivity of the user, and in turn keeping the user and the management happy.
This tutorial focuses on presenting various performance tuning tips and tricks to make the ABAP programs efficient in doing their work. This tutorial also assumes that the reader is well versed in all the concepts and syntax of ABAP programming.
Use of selection criteria
Instead of selecting all the data and doing the processing during the selection, it is advisable to restrict the data to the selection criteria itself, rather than filtering it out using the ABAP code.
Not recommended
Select * from zflight.
Check : zflight-airln = LF and zflight-fligh = BW222.
Endselect.
Recommended
Select * from zflight where airln = LF and fligh = 222.
Endselect.
One more point to be noted here is of the select *. Often this is a lazy coding practice. When a programmer gives select * even if one or two fields are to be selected, this can significantly slow the program and put unnecessary load on the entire system. When the application server sends this request to the database server, and the database server has to pass on the entire structure for each row back to the application server. This consumes both CPU and networking resources, especially for large structures.
Thus it is advisable to select only those fields that are needed, so that the database server passes only a small amount of data back.
Also it is advisable to avoid selecting the data fields into local variables as this also puts unnecessary load on the server. Instead attempt must be made to select the fields into an internal table.
Use of aggregate functions
Use the already provided aggregate functions, instead of finding out the minimum/maximum values using ABAP code.
Not recommended
Maxnu = 0.
Select * from zflight where airln = LF and cntry = IN.
Check zflight-fligh > maxnu.
Maxnu = zflight-fligh.
Endselect.
Recommended
Select max( fligh ) from zflight into maxnu where airln = LF and cntry = IN.
The other aggregate functions that can be used are min (to find the minimum value), avg (to find the average of a Data interval), sum (to add up a data interval) and count (counting the lines in a data selection).
Use of Views instead of base tables
Many times ABAP programmers deal with base tables and nested selects. Instead it is always advisable to see whether there is any view provided by SAP on those base tables, so that the data can be filtered out directly, rather than specially coding for it.
Not recommended
Select * from zcntry where cntry like IN%.
Select single * from zflight where cntry = zcntry-cntry and airln = LF.
Endselect.
Recommended
Select * from zcnfl where cntry like IN% and airln = LF.
Endselect.
Check this links
http://www.sapdevelopment.co.uk/perform/performhome.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/afbad390-0201-0010-daa4-9ef0168d41b6
kindly reward if found helpful.
cheers,
Hema.

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

Can someone make iBooks have the Option to view 2 pages in landscape mode so it can use up all the pixel real estate?

Can someone make iBooks have the Option to view 2 pages in landscape mode so it can use up all the pixel real estate?
Apple usually does this for OSX and its great when compared to windows where it doesnt use up all the real estate for viewing applications like websites and pdf files but when it comes to iBooks, it feels like there is no apple touch to it and is limited.
If steve jobs were still alive, i bet there wouldnt be this problem >.>
Please consider this as a real problem for people out there who would like to see 2 pages in landscape mode with pdf files and not just epub files.
Thanks!

Penguin, do you always insult people on here or was I just a special case?
If you read the statement carefully, which you obviously did not! I was speculating, and I did not say anything for certain about knowing or not knowing ...
I'm happy for the reply to the post and helpful link you posted to where I can leave some feedback for my post on an Apple monitored site but i rather you not reply if your gonna leave a snyde remark with every helpful comment.
Don't do it again. and Thanks for the help.

Can anyone tell me where the download for Viewer V32.2 for indesign cc 2014 is located? Thanks Steve

Can anyone tell me where the download for Viewer V32.2 for indesign cc 2014 is located? Thanks Steve

v32.2 does not have an installer, all changes were made on the back-end.
The v32 installers (released in september) can be obtained here (look for Digital Publishing Suite):
https://www.adobe.com/downloads/updates.html

How can my wife access all of our itunes music if she signs up for iTunes match, but her apple id is different than mine?

How can my wife access all of our iTunes music, even if she subscribes to iTunes Match, if her Apple ID is different than mine?

I do subscribe to iTunes Match.....and the music i am referring to is all of our downloaded albums and songs that are currently in iTunes and in the "cloud" on my iPhone and my iPad.
So if she uses my Apple ID for her iPhone, she can sign up for iTunes Match on my account? Will any of my apps then transfer to her phone? Or just the iTunes "data"?

Can anybody tell me when the preorder for unlocked iphone 4s begin

can anybody tell me when the preorder for unlocked iphone 4s begin

I have not heard of any pre-order for this at all.
Why do you think there will be a pre-order?

Re: I want to buy the app, but I can not because I forgot the security issues

Re: I want to buy the app, but I can not because I forgot the security issues

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page should let you reset them : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

Can Solution Manager manage all the security for all of our SAP Landscape?

Similar Messages

Maybe you are looking for