Can some body point me to the source of simulation(sap tutor) scenario file
There used to be some sap tutor(sim) files for some config scenarios of XI, I am no longer able to see them here in SDN. Can somebody tell me where they are gone or if the location is changed.
Thanks in advance
Hi Krishna,
You can check in service.sap.com for this-
Link is -
https://websmp109.sap-ag.de/netweaver ->SAP Netweaver In detail->Process Integration->SAP Exchange Infrastructure->Media Library
There are mnay tutor files/documentation etc..
Elearning~
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]
Topic based Demos
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#xi [original link is broken]
Regards,
Moorthy
Similar Messages
-
can some 1 please help me with a issue of getting a apple certificate please and also explain in layman terms
I'm not sure if this will help or not, but I came across this page while wondering the same thing. http://www.apple.com/certificateauthority/
I just clicked the link "download certificate" and then opened it and it installed. I dont know if it's different on Win7, but this worked for me on my MacBook Pro.
Good luck! -
Can some body give me an advice, my cursor can not be controlled (using pad) after I shut it down, and open again. But this problem goes away after I close and open the lid.
Boot from your OS installer disk and run Repair Disk from Disk Utility.
-
I HAVE A MAC LAP TOP MAC BOOK AND WANT JUST TO REINSTALL THE SOFTWARE I DONT CARE ABOUT MY FILES I HAVE BACK UP BUT WHEN I INSERT THE DISK VERSION 10.5 WHICH COMES WITH MY COMPUTER DOESN'T WANT TO READ I HEARD THA IS TRYING BUT NOTHING,
CAN SOME BODY HELP ME...There is a possibility that the disk drive could be broken, if it just spits it back out that usually means its toast. If your MacBook has a Core 2 Duo processor, you can install Lion (via a thumb drive not disks). Here is a link to the Lion thumb drive.You can also still order them for $19.99 by calling 1-800-MY-APPLE. Also you can borrow an external disk drive and try the Leopard disks that way as well.
Good Luck! -
Hi, folks can some body help me¡ How I can use de second code to the Itunes card to use the Itunes card.... My number is vanished, how i can submit my Itunes card?
iTunes Store: Invalid, inactive, or illegible codes
http://support.apple.com/kb/TS1292 -
I have forgoten the security questions,i have tryed ewerithing to reset all of the instructions i have recived from the apple support team. I still can not reset the questions. Can some body please help me to reset them. Thank you and best regards
Since this is a user-to-user support forum, there isn't much we can do other than refer you to the following instructions and as noted in the instructions, then to Apple Support if you can't reset as shown in the instructions: If you forgot the answers to your Apple ID security questions
-
I renew my itunes match and all the old information was lost can some body help me ?
i renew my i tunes match and all the old information was lost can some body help me ?
a few month ago i had all my songs on the cloud with i tunes match
than apple has change their policy and they wanted 24.99 for a year
after two month i renew my i tunes match but all my information was lost and now i cant play and sync all the music a had
any body had this problem ? any body solved it ?Greetings yoavfromseattle,
Welcome to the Apple Support Communities!
I understand that after renewing your iTunes Match subscription, you are not able to access your music as you would expect. To troubleshoot this situation, I would recommend reading over and working through the information in the attached article.
How to troubleshoot iTunes Match - Apple Support
Cheers,
Joe -
Real Estate: Can some body tell me configuration of Guest House Process
I m working on RE Business Process:
Can some body tell the exact configuration of Guest House Process.
If u find, Plz let me Know.
Regards,
Mahadev.
Edited by: Mahadevappa Shrimanth on Apr 14, 2008 8:29 AMHi Ahmed ,
Did you got any update regarding the above query ?
Do you have any idea about the extraction/ data source for 0REFX_C14.
Regards
PA -
Can some body tell me where my code is going wrong
I have been trying to print a jTextArea and have been having trouble. Can some body look at my code and tell me where I am going wrong please, Thank You.
I have pasted the code below. P.S. I have only attempted to print the jTextArea I have not done anything else. The program was written in the hope that I could learn how to print a jTextArea and no other function in an aim to transfer the successful code to other applications that I enter information into the jTextArea.
* print.java
* Created on 05 August 2007, 23:34
package my.print;
* @author morgan
import java.awt.print.*;
public class print extends javax.swing.JFrame {
/** Creates new form print */
public print() {
initComponents();
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" Generated Code ">
private void initComponents() {
jScrollPane1 = new javax.swing.JScrollPane();
jTextArea1 = new javax.swing.JTextArea();
jButton1 = new javax.swing.JButton();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
jTextArea1.setColumns(20);
jTextArea1.setRows(5);
jScrollPane1.setViewportView(jTextArea1);
jButton1.setText("jButton1");
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(layout.createSequentialGroup()
.addGap(88, 88, 88)
.addComponent(jScrollPane1, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addComponent(jButton1)
.addContainerGap(67, Short.MAX_VALUE))
layout.setVerticalGroup(
layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(layout.createSequentialGroup()
.addGap(95, 95, 95)
.addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addComponent(jButton1)
.addComponent(jScrollPane1, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))
.addContainerGap(109, Short.MAX_VALUE))
pack();
}// </editor-fold>
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
try {
jTextArea1.print();
} catch (java.awt.print.PrinterException exc) { // ... }
* @param args the command line arguments
public static void main(String args[]){
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new print().setVisible(true);
// Variables declaration - do not modify
private javax.swing.JButton jButton1;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JTextArea jTextArea1;
// End of variables declaration
}sorry i hope that this preserves the code.
* print.java
* Created on 05 August 2007, 23:34
package my.print;
* @author morgan
import java.awt.print.*;
public class print extends javax.swing.JFrame {
/** Creates new form print */
public print() {
initComponents();
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" Generated Code ">
private void initComponents() {
jScrollPane1 = new javax.swing.JScrollPane();
jTextArea1 = new javax.swing.JTextArea();
jButton1 = new javax.swing.JButton();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
jTextArea1.setColumns(20);
jTextArea1.setRows(5);
jScrollPane1.setViewportView(jTextArea1);
jButton1.setText("jButton1");
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(layout.createSequentialGroup()
.addGap(88, 88, 88)
.addComponent(jScrollPane1, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
.addComponent(jButton1)
.addContainerGap(67, Short.MAX_VALUE))
layout.setVerticalGroup(
layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(layout.createSequentialGroup()
.addGap(95, 95, 95)
.addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addComponent(jButton1)
.addComponent(jScrollPane1, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))
.addContainerGap(109, Short.MAX_VALUE))
pack();
}// </editor-fold>
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
try {
jTextArea1.print();
} catch (java.awt.print.PrinterException exc) { // ... }
* @param args the command line arguments
public static void main(String args[]){
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new print().setVisible(true);
// Variables declaration - do not modify
private javax.swing.JButton jButton1;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JTextArea jTextArea1;
// End of variables declaration
}The preview looked correct. Thank you for the URL. I have been writting my program in netbeans 5.5.1. unfortunately it simplifies the code that you have to put in but at the same time it makes it difficult to follow code examples that are intended to develope the whole of the code from scratch. I have tried looking at the netbeans guidance documentation but find that it doesn't always work even when I follow the direct code for the demonstrations. Anyway thanks for the guidance and for getting back to me so soon. -
Can some body help me to develop labview code for generating pulse to drive ac servo motor
can some body help me to develop labview code for generating pulse to drive ac servo motor... i am using NI 9401 card ....tnx
Driving an AC servo motor would (I missed AC on the previous msg) requires some complex hardware. This is generally done by drivers specifically designed for this purpose. I doubt you will be able to accomplish this with the hardware you currently have and it might be cheaper to just buy a driver for it and control the speed through the driver.
-
can some body help me? yesterday I format my iphone and it have been more than 24 hours a litlle circle moving
Reset, hold both the Home and Power buttons for about 10 seconds until the iPhone begins to start. If still problem, and your decide to Restore your iPhone, try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time.
-
Can some body help me reg. BAPI_USER_LOCK
Hi,
I am using this FM BAPI_USER_LOCK to lock firecall id's .But it is not working in 4.0 B version.
Can some body help me any alterante FM for the FM.
ThanksHi,
Below are the notes for this Function module.
You can unlock user USERNAME with the method Unlock.
The method is fully integrated in the central user administration system.
If the method is called in a sytem that belongs to a group for central user maintenance, the method behaves accordingly.
If the method is called in the central system of this type of system group, this triggers user distribution.
The user is also locked in the dependent systems.
The prerequisite for this is that the field maintenance attributes (Transaction SCUM) are set.
You need to do the prerequistie for running this BAPI.
With Regards,
Sumodh.P -
Pages is deactivating iCloud alone, can some body help me
pages is deactivating iCloud alone, can some body help me
I am having a similar problem. When I try to open pages, it opens and then quits immediately. It is only when with iCloud. So what's going on with the Pages app? Needs to be corrected SOON!
-
My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem. I am using snow leopard.
Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
and PRAM How to Reset NVRAM on your Mac - Apple Support
If those don't help you can try a cleaning disc or a quick shot of compressed air. Chances are that your drive has failed, join the club it's not all that uncommon. You can either have it replaced or purchase an inexpensive external drive. Don't buy the cute little Apple USB Superdrive, it won't work on macs with internal drives working or not. -
My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem
The frist thing to try is a drive-n disk. They are cheap (US$5-15) and easy to use. Many unresponsive drives, even ones declared "dead" by an Apple tech, have returned to service after a cleaning.
Check with home entertainment specialty shops, electronic superstores and office supply outlets that sell computer accessories.
Maybe you are looking for
-
Adobe CC download error when I logged in to my account.
Hi, The problem is I can't download any app updates via Adobe CC when I logged in to my account. But I try to download it from the new account which is created for test and it worked! So I'm thinking about transfer everything(include the settings) fr
-
We found an issue in the 1.0.0.4 version of PQA. When selecting a media reference file the 'Frames' indicator is not populated and the file path remains greyed-out if the file is marked as read-only. When it is not read-only everything is peachy keen
-
Is there a plug-in yet that will allow pdf forms to be opened in the browser and submitted?
Is there a plug-in yet for Firefox that will allow pdf forms to be opened in the browser (instead of downloaded), and then submitted to an e-mail address using the submit button on the form? I finally installed the plug-in that allows a pdf to open i
-
Reverse one item after F110 payment
Dear ALL: is it possible to reverse one item after F110 payment? it seems when I reset and reverse the payment document for this line item, the table REGUH still has this line items record, if I delete the output for this , it will delete all the ite
-
Help me