Can some one translate these instructions D-Link DI-524: installation as wireless HUB/Bridge General ON ALL TYPES OF ROUTERS DHCP SERVER HAS TO BE DISABLED ON ALL TYPES OF ROUTERS UPnP ALSO HAS TO BE DISABLED OTHERWISE YOU CAN SEVERELY HINDER OTHER USE
D-Link DI-524: installation as wireless HUB/Bridge
General
ON ALL TYPES OF ROUTERS DHCP SERVER HAS TO BE DISABLED
ON ALL TYPES OF ROUTERS UPnP ALSO HAS TO BE DISABLED
OTHERWISE YOU CAN SEVERELY HINDER OTHER USERS IN YOUR NEIGHBOURHOOD!
Practical example: D-Link DI-524
The DI-524 is a wireless router.Although the manufacturer doesn't mention this, you can also install this device as a wireless hub.Of course this is not supported by the manufacturer. Therefor you have nowhere to go in case of any problems Plug in the power cord of the DI-524. Do not yet connect the network cable!Search for existing wireless networks with your computer. Connect with the router.This can for example be done like this:
Click the start-button (at the bottom in the left corner of your screen).
Go to control panel
Go to internet connections (you may have to choose classic representation first)
You can now see your wireless network card, among other things. Right-click and 'View available Wireless networks'.
Connect to the router. In most cases the router will be called 'default'.Check your IP-address: you get an IP address from the DI-524
Go to the start-button
Go to 'Run'
Type 'cmd' and press enter
type 'ipconfig' and press enter
your IP address starts with 192.
Surf to your router with your regular browser. For this you need the address and a password, which you can find in the documentation.
In this case the address is 192.168.0.1
Now you must secure the router. For this it is best to use WPA-PSK
Your key is a randomly chosen sentence. Don't make this sentence too short.
Warning: Case sensitive!
You cannot reach the router anymore now.
Go back to your network card via "make connection". Search for your wireless network again and make a new connection
You are asked for a key. Supply this key the way you configured it in your router.
Surf back to the router.
Disable the DHCP server.
!! YOU HAVE TO DISABLE UPnP ON ALL TYPES OF ROUTERS
OTHERWISE YOU CAN SEVERELY HINDER OTHER USERS IN YOUR NEIGHBOURHOOD!
for this, go to Tools, Misc and switch off UPnP
Save these settings.
If you do not have a D-link router, look up in the manual or somewhere else where you can disable UPnP
Now you cannot reach the router anymore again.
It is only from this moment that you can connect the router to the modem.
Important: Use one of the 4 LAN ports. Never use the WAN port!
Go to your network card via the control panel. Right-click and "Repair"
Now you should get an IP-address in the range of 10.nnn.nnn.nnn
If you still don't have 192... you've made an error. The DI-524 still functions as a router and this is not allowed!
There are no Mac based instructions. The router is accessed and adjusted the same way whether you are using a Mac OS X, Windows or Linux. As noted in the other post it is done through your web browser which works the same from any computer. Even a Chrome Book.
akertrav wrote:
Thank you for that what I have been trying to do is extend the range of my wifi witha second dilink router. I was hoping for some mac based directions to achive this rather than the PC based as presented. Thank you for your ireply Paul
Similar Messages
-
How do I download the entire MSDN Library. Can some one give me the download link path
Hello
How do I download the entire latest MSDN Library. Can some one give me the download link path?
regards
Manoj GokhaleOutside of an MSDN subscription it looks like this is it.
http://www.microsoft.com/en-us/search/DownloadResults.aspx?q=msdn+library+for+visual+studio&first=1&ftapplicableproducts=Developer+Tools&sortby=-availabledate
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?
If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it
-
Hi,
What is that you are trying to accomplish ? Is it deployment or
trying to develop applications ? Are you getting any errors ? If so,
please post them to help you. I think the documentation is the best place
for you to begin with.
Regards & Happy New Year
Raj
Arif Khan wrote:
New To Iplanet app server.Can some one help me getting started by
delpoying and calling one of each of these:JSP,Servlet,EJB.Tried with
iplanet docs..didnt quite get it. thanx
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading.
<Phone Number Edited by Host>You aren't addressing anyone from Apple here. This is a user forum.
You might want to call a neaby Apple store to see if they have a free class you could attend. -
i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created. As i dont have the access to the earlier id anymore.
You cannot. The apps are assigned to that Apple ID and there is nothing you can do to change that. You could choose to download them again with the new Apple ID, any paid apps will need to be purchased again.
Hope that helps. -
please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in. Iv never used an ipad b4 so don't really know much. Hope some one knowz.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
Can some one tell me a better way...
Hi All..
I work on a web application. I create user ids for people logging into my application. here I have a small problem.. This is what I am currently doing...
When I create a new user, I assign a new user id to the user and store all hi info.
All our user ids are stored in User_ID table and user info in User_Info table.
First I get the max user id from the User_Id table.
int iuserid = select max(User_ID) from User_ID;
Then I add ' 1 ' to this and assign it to new user.
iuserid = iuserid+1;
insert into User_id values(iuserid, <ssn> );
Then I store all user info in User_info table..
insert into User_info(iuserid, <first_name>, <last_name>,...);
Both these SQLs are executed as a transaction.
The problem that I have...
It works fine in a normal environment and in my testing.
But when the load inceases, before I insert into the User_info, another user tries to get the max User_id from User_ID table, then it conflicts..
I have seen occurences of User_Info storing the info of a different user against the User_id when many people are accessing the app at the same time.
Can some one tell me a better way to handle this scenario..
Appreciate all you help..
TIA..
CKHi,
assuming that the requirement for user_id is only for uniqueness (primary key requirement) not continuosly.
perhaps can try this,
1) create a table to keep the max id for each table's key.
e.g.
create table key_id_lookup
key_name char(n),
current_value number(m)
where n & m is the size of the field
2) for each creation of entry in the user_id table, lookup the value in the key_id_table and increment it after retrieval.
e.g. current_id = select current_value from key_id_lookup where key_name = 'user_id_key';
current_id+=1;
update key_id_lookup set current_value = current_id where key_name = 'user_id_key';
something similar to use of sequence if your database support it.
3) continue with the creation of record in other tables. now obtain the time stamp of creation and append with the current_id obtained. e.g. timestamp = 132456872; size of m is 5, user_id = 132456872 x 100000 + current_id;
this should give you a unique key at creation time.
There should be other better ways of resolving this(like locking the table for the update operation but affect performance, etc), depending on the feature supported by the database in use.
Hope this can help as last resort if other options not available. -
Hello can some one assit me please. I have purchased a new lap top and copied my old itunes files accross so i do not loose all my music, and have to start again. I can play and see allof my tunes and play these. However I am unable to access the Itunes store through my itunes files. It will not interface at all. I can access itunes store through the Web, but not through the my ituntes file. I have gone in and authorised the laptop through the various process. Highly frustrated already paided a computer person to fix this. However hed deleated all files and started again he had it work and then I turned computer on again and it will not interface from the itune file to itunes, So if I copy a CD it will not tell you the name of the track. I cannot asscess the itunes store to action anything. Please assit me
Regards
KarenI am not an expert, but assuming that you have a Windows or Mac folder with music in it and want to move that to a new laptop, I think you have to import it into iTunes. iTunes needs to associate each file with a link, so copying it over will not associate a link.
Delete the files and try importing. -
I keep gettinf this error message can some one help!!!
I keep getting an error -50 when i try to display teh album artwork on my ipod can some one help me please
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
I have old MacBook running OS 10.6.8 I was told in Apple Genius Bar that I need a code from apple support to upgrade to 10.7. Apple support will not help because I am have their support plan. Can some one help?
hi Samberl
thanks a lot for the fast reply.
I was dragging folders from main folders on the laptop-desktop onto the external drive icon - to copy them across....
Your suggestion sounds very promising - I didn't know about 'cloning'.
Yes the idea is to backup the laptop - I thought I would just move it all now, new - and then keep saving/dragging physically across to the new drive myself each day or two...
Would this be the sizeof the internal hard drive = c.500 gb ? = under the HD icon on desktop is written :
" 499.76gb , 311.5 gb free "
I can erase and start agin on the new external drive - so this plan is to make two partititions, rather than the one at present, and make one of them 500 gb ?
I have found CCC [carbon copy cloner] googling - looks good.
When CCC site says it backs up the hard drive - would this mean all my files [over 100 gb] that are mostly in folders on the desktop, plus the others in itunes, iphotos etc found in the HD icon, would all copy across successfully [wherever they are in the computer ] ?
thanks again, hope you can clarify these things and then I will go for it.
It would be great and amazing if this 'lack of permission' message doesn't show up in the process of doing this ccc transfer - hopeful!
Julie -
TS1702 Unable to download or update apps can some one help
Unable to download or update apps can some one help
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again.
For iOS 6 only ....Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
How can some one, hearing my call- receiving?
I have a central phone box in my office, and two phone (panasonic secretory) phones, in my office. I'm almost sure that someones can hear my voice in the office, or hearing phone calls, as voicemail, or email, or sms,... I don't know. As i have apple p.c, and Iphone, and Ipad one, and Ipad Air, so my everything is Apple, and Macintouch system, and earlier I used LAN at my office to connect these all, plus my Printer including Scanner and Fax, plus one Camera for Security conected to a DVR for recording, and a 38 inches LED connected to camera too, so at the moment I feel, and sure someones are listening or even may be watching me at the office, is there anyone who could help me, or suggesting me to do something acording my problem? I really apreciate.
martyjones wrote:
i have got a new playbook and the software is os 2.1.01
Are you sure that's the version?
martyjones wrote:
Hi all can some one tell my how I get android apps on my playbook
Read here: How To Sideload Android Apps On The BlackBerry PlayBook OS 2.0
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks
If the SIM is out of your phone, find my phone needs a data connection, so could use wifi - IF in range of a wifi and one that it can join (ie. a known network or one that is wholly open so no login required). Your phone could also simple be turned off, so not findable, or it may have been restored (plugged into iTunes and restored as new) again, making it permanently unfindable. Honestly, for someone stealing an iPhone, this is likely the first thing they do - restore as new and it is theirs forever.
Find my iPhone is tied to the users iCloud account - the find function is part of the iCloud account's services and it communicates with the iCloud servers over a data connection - either wifi or 3G.
Have you set up your iCloud account on your replacement phone, and is it working properly on that phone? -
i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks
sos1der wrote:
pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
sos1der wrote:
but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
That's an entirely different issue, unrelated to your iOS devices.
Maybe you are looking for
-
In ldap how do you handle to users logged in at the same time
in ldap if i am logged in as one user and make a change to a page and another user makes another change how do i handle refresh the other persons logged in pages...
-
Just wondering if I can use an old powerbook battery that only has 12% of original capacity when I have the laptop plugged in, (to save the good battery) and only use the good battery when I decide to use the laptop off main power? Or will this screw
-
Can anyone tell me if you can print the albums you have in your iTunes library, whether from iTunes itself or from the hard drive (through windows explorer, etc). Printing all of the songs would be too many pages and I'd like to be able to just print
-
Got my MacBook back today- on hold now with AppleCare
My MacBook first shut down on August 7th and was pretty much unusable by the 14th. I sent it in for repair a couple of weeks later, hoping a fix would be developed in the meantime. FINALLY got it back today, with a new heatsink and LB, as well as new
-
I don't know how to get this thing to work: public class TestGrade public static void main(String[] args)throws GradeException int studentID = 123423; char grade; String aGrade = new String(); try System.out.println("Student #: " + student