Can some playlists shuffle by default and others not?

I have some playlists that I ALWAYS want to shuffle, like my “everything except jazz and classical” or maybe my “rock only” playlists. And now that I think about it I pretty much want almost all my playlists to shuffle. BUT, I nearly always want albums to play in order.
So here’s my problem:
I set my 80gig iPod to “shuffle/songs” and listen to my “everything except jazz and classical” playlist and everything is fine. Then, I hear a song that makes me want to hear the whole album (in order) so I need to go to settings and select “shuffle/off.” Then when I get done with that album or I’m ready to move on and I want to shuffle one of my playlists I need to go back to settings and change shuffle again to songs.
Possible Solution:
Since I nearly ALWAYS want certain playlists to play random (shuffle) and albums to always play in order isn’t there away (and there should be) to make certain playlist default to shuffle? I would think you should be able to right-click on a playlist and select “default shuffle for iPod” or something like that.
Anyone have a solution, because I’m really getting sick of turning shuffle on and off for the same thing over and over?
Thanks,
Eric
iPod 80gig, Windows box   Windows XP  

As of now, that's the only way to do it.
Send your suggestion to Apple here.
iPod Feedback.

Similar Messages

  • Why are some websites very slow loading and others not

    Some websites are very slow to load and others not. Doesn't seem to be any logic as to. The affected URL below is one that is very slow. I can understand if it is not an Aussie website. Having said that New York Stock Exchange website "http://www.nyse.com/about/listed/lcddata.html?ticker=DJI" loads quicker than the subject URL

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

    Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

    Thanks. I can change the forwarding settings in Gmail to be either POP or IMAP. That is quite simple. I just looked at those settings on the Gmail server and, to my surprise, both are enabled. In order for outlook client on my computer to receive IMAP emails I have to change the email account settings in my current outlook from POP to IMAP. I don't need to be using the Exchange version of Outlook to receive IMAP. I guess I'll do a little research tomorrow on Exchange so i can figure out what, if anything, it might do for me.
    I glanced at the link you sent me and it looks like it might be very helpful - another project for tomorrow.
    BTW: I hit "This Solved my Question" by accident. I meant only to "like' your response so you would get some benefit from the help you've given me so far. I hope I haven't discouraged others from taking a shot at helping me. I suspect there is more than one way to approach this and, as you know, my problem isn't really solved until I have what I need all set up and running smoothly.

  • How can I allow the application to line through a field that has been locked after being digitally signed?  We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once

    How can I allow the application to line through a field that has been locked after being digitally signed?
    We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information.  However we are receiving an error when attempting to enter data  in the field which we have this edit.  Error property: line through cannot be set because doing so would violate the document permission setting.  any idea how we can get around this issue?

    You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.

  • I am making a multiple page document and need some pages to be landscape and others to be portrait.  How can I do this?

    I am making a multiple page document and need some pages to be landscape and others to be portrait.  How can I do this?

    In pages you can only have one orientation of the Page. You have to rotate the content on the pages that you want horizontal. Save the document in Pages format so you'll have a original version to work on. Then Export to or Print to PDF and open the document in Preview. Here you can rotate the pages to horizontal viewing.

  • Why On Flex Builder Some Comments Are In Green And Others Are In Blue

    Hi, I'm really newbie, and I'm trying to put my classes in
    order, and when I was commenting, I noticed that some comments are
    in green and other comments are in blue.
    For example:
    /* this is green */
    * this one is blue
    Thanks for your attention.

    Those are the default colors for syntax highlighting. Check
    Window->Preferences->General and then look under the editing
    categories. Syntax highlight colors are in those panels and you can
    change them to your liking.

  • I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

    I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

    velma Monreal wrote:
    I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
    Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want.

  • Why are some of my calendar appointments synching, some synch multiple times and others not at all?

    why are some of my calendar appointments synching, some synch multiple times and others not at all?

    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod - http://support.apple.com/kb/TS1497

  • What can I change to gain access to my work vpn.  I can access with my MacBook Air and other routers.  Can use my ipad and this time capsule to successfully access the VPN.

    What can I change to gain access to my work vpn.  I can access with my MacBook Air and other routers.  Can use my ipad and this time capsule to successfully access the VPN.

    You need to give us a lot more info.
    I presume the MBA and the TC are the combo that doesn't work, although you don't clearly state that.
    If the ipad and TC work.. are you sure the ipad is connected via the TC and not 3G network?
    If it is then the TC itself is fine and the issue might be setup on the MBA.. although if the MBA works with other routers.. that rather confuses the matter.
    You need to actually tell us how the TC is setup in the network. What kind of broadband modem you have and what kind of vpn you are using.

  • My Wife got an iPhone at work. IT set it up the first time on another machine, they finally install iTunes on her machine but I don't know if she can sync without loosing Photos, SMS, and other things. She had six months of stuff on that phone?

    My Wife got an iPhone at work. IT set it up the first time on another machine, they finally install iTunes on her machine but I don't know if she can sync without loosing Photos, SMS, and other things. She had six months of stuff on that phone?
    The problem is she can't update to new software until she connect to iTunes, but she don't want to loose all that info.
    My question is:
    If she register her apple ID on that new computer, and sync the phone, will she loose everything? or iTunes will back up first (because apple id match) and then sync.
    Otherwise, how can I do it? The closest apple store is 3 hours away. thanks!

    Before you connect to a new PC, make sure that autosync is disabled in Edit/Preferences/Devices, otherwise her phone will be wiped during the following sync.
    If she has data on the phone she wants to save, back up manually:
    Disable autosync in iTunes, connect your phone to her new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing. Transfer the purchases the same way, choosing "transfer purchases" this time.
    When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
    About backups and what's saved:http://support.apple.com/kb/HT1766
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Transferring data is also covered here: http://support.apple.com/kb/HT4137

  • How can you safely clean your magsafe and other ports on a macbook pro?

    How can you safely clean your magsafe and other ports on a macbook pro?

    MagSave, yes. Other ports cannot be safely cleaned although you can blow air in to clean out dust.

  • HT2515 I have a Macbook Pro and an iPhone5. At one point, I received messages in sync on both devices. Now, I get some messages on the Macbook and others only on the iPhone. What happened?

    I have a Macbook Pro and an iPhone5. At one point, I received messages in sync on both devices. Now, I get some messages on the Macbook and others only on the iPhone. What happened?

    Associate your mobile number with your Apple ID, if you haven't already done so.
    Sign out of iMessage on the Mac:
    Messages ▹ Preferences ▹ Accounts ▹ Sign out
    and on the iPhone:
    Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
    Then, on the phone, tap
    Use Your Apple ID for iMessage
    Sign back into iMessage on both devices and test. If there's no change, you may have to wait for a change in network conditions.
    Credit for this solution to ASC user SmittyLove and to Glenn Fleishman of tidbits.com.

  • I am trying to update my software through the app store but for some reason an error occurs and will not allow me to do so

    I am trying to update my software through the app store but for some reason an error occurs and will not allow me to do so. And when i go online to log into my apple id account it states that there is an error. Can someone help me solve this issue, its annoying me?

    Apple’s having trouble with the iTunes Store servers right now. Wait for them to resolve the issue.
    (123935)

  • I cannot add a printer. It is not listed under default, and does not allow me to add printer.

    I cannot add a printer. It is not listed under default, and does not allow me to a add printer.

    philw
    Try some maintenance actions:
    1) Reset Printing System:
    http://support.apple.com/kb/PH14141
    2) If that doesn't help, repair the hard drive and permissions after booting from the recovery partition:
    http://support.apple.com/kb/ts1417
    (go down to "Try Disk Utility")

  • Pls. give some suggestion on Subsequent Credit and debit note?

    Dear Gurus,
    Pls. give some suggestion on Subsequent Credit and debit note?
    Regrds
    Shikha

    Hi Sikha
    We generaly use subsequent debit / credit to adjust invoice value without affecting Qty
    Pls check notes supplied by SAP
    A subsequent debit/credit arises if a transaction has already been settled, and a further invoice or credit memo is received afterwards.
    A subsequent debit/credit changes the total invoice value of a purchase order item; the total invoice quantity remains unchanged. Therefore, only a value-based update of the purchasing transaction takes place. There is no quantity-based update.
    You must enter an invoice as a subsequent debit if a purchase order item has already been invoiced and further costs are incurred. (Example: A vendor has inadvertently invoiced you at too low a price and then sends a second invoice for the difference.)
    You must enter a credit memo as a subsequent credit if a purchase order item was invoiced at too high a price and now you have received a credit memo. (Example: A vendor has inadvertently invoiced you at too high a price and then sends a credit memo for the difference.)
    If you enter a subsequent debit/credit, the system suggests the entire invoiced quantity, but no value. The maximum quantity that you can subsequently debit or credit is the quantity that has already been invoiced.
    You can only enter a subsequent debit/credit for a purchase order item if an invoice has already been posted for that item.
    A subsequent debit/credit cannot refer to a particular invoice.
    Subsequent debits and credits are listed separately in the PO history
    Typical example is like
    suppose vendor has overcharged u for perticular PO and afterward he want to correct it
    In such scenario u can post subsequent debit to correct PO without affecting Qty. field
    <b>Reward if usefull</b>
    Vishal..

Maybe you are looking for

  • How long does it take for Verizon to activate a new device?

    I got an iPad 4 for Christmas. Today I screwed up my courage and decided to go online and add a tablet to my Share Everywhere service. Went thru all the screens giving them the EMEI #, the SIM card number and all the other requested info. I got a lin

  • RMPS: Word Templates & Attributes

    Hi Everyone, i've created a word template and i copy a text on it using Create From Template. But, there's a bug or something else wrong if i try to set the same attribute for many times on the same word template. Only the first field on word is set,

  • Images loaded at run time

    I have a situation where I need to have images placed on a web page, but the images themselves will be loaded from a database. How to I place these images that I load (jpg files) into the page? It looks like the Image component is only set up to bind

  • Dynamic Query Refcur comes back empty?

    Has anyone seen this problem. I have been using ref cursors to pass back data on procedure calls. When I use static sql and "OPEN <yourrefcursor> FOR", everything works fine. When I use NDS/Dynamic SQL the same query fails to return anything. Anybody

  • IDoc UTF-8 conversion

    HI, im getting IDoc from a Seeburger converter with UTF-8 text string. is it possible to convert this string or is sap possible to read/show utf-8 string correct ? we are using ECC6.0 unicode System. example: Kapitän should be shown as Kapitän Thank