Can somebody help ??? iPhone 3Gs is stuck with an apple logo with the long loading bar. but iTunes popup say iPhone had been restored. iOS 4.3.3 to 4.3.4 or 5
Can somebody help ???
iPhone 3Gs is stuck with an apple logo with the long loading bar. but iTunes popup say iPhone had been restored. This happens when upgrading iOS 4.3.3 to 4.3.4.
Thanks for your answer
i've checked the host files, nothing referring to apple. The device has never been jailbroken...
Is there something else i can do?
Similar Messages
-
Ipod touch stuck on apple logo screen and empty loading bar
This is what happened. I got a friend who knows how to download games in my ipod touch. But as it turned out He broke it
He cant restore it. I tried DFU mode the restoring. and even Redsnow! its just stuck on a Apple logo and an empty loading bar under it.
and when you look at itunes it says "waiting for ipod" but it doesn't do ANYTHING! i left it like that for 2 days and it haven't load a single bit.
please help. if you have an answer please give the steps. Ive been searching for the past two weeks on my own and i can't fix it.Try mstarting with the bold
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
hi, I reset my iphone 3gs, and it brought an apple logo on the screen so I restored it to version 6.0 but it can not accept a sim or connect to itunes for activation.what do I do, please help me
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
Can somebody help me in finding a solution or an explanation to the problem I am currently experiencing as well as others wherein we cannot connect to the iTunes store. An error message appears and either says "iTunes could not connect to the store. An unknown error occurred (0x80096004). Make sure your network connection is active and try again" or "iTunes could not connect to the store.Make sure your network connection is active and try again." Despite the fact that my network connection is working quite fine, this problem still persists. I can say that my connection is fine because I can surf the internet and furthermore, I used to connect to the iTunes store just before this incident happened which started from April 17, 2014 and persists until today. I tried to solve the problem by following the troubleshoot procedures given in the support section of this site but it really did not solve the problem. I believe that others are experiencing this situation as well very similar to mine when it comes to the time of occurrence as I have read in the discussions in this site. Even though we have different network connections, operating systems and other specifications, we still experience the same problem, so is there really a problem with our computers or is it with the iTunes? And by the way, my computer works under Windows XP. Thanks a lot. God bless.
Try this...
Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
cmd /k netsh winsock reset
Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
You should get something similar to this:
Reboot the computer and the problem should be resolved.
If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
tt2 -
Help I just get stuck with the blank screen and the white circle
help I just get stuck with the blank screen and the white circle after i erase all content and setting
i dont know how to do pls help.Try connecting the device to your iTunes library and restoring it. If necessary place the iPod into recovery mode using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock -
iPhone is stranded in the apple, then appears with a long loading bar, this is completely filled, then again it restarts, fully charged and the process remains in a dark screen with nothing again until discharged, I again tried to restore in the new iTunes 12.0 the iOS 6.1.5 which is the actual version of my 3GS has failed today, still the same problem and not to do, keep restarting and does not stop, I need help urgently, Does anyone know how I can fix it ?, not served me the "Safe Mode", I've tried about 15 times and nothing, thanks you, ¡HELP ME!.
Hi Tomas,
Welcome to Apple Support Communities.
Take a look at the article linked below, the troubleshooting tips in it may be able to resolve the issue with your iPhone 3GS not starting up past the Apple logo.
iOS: Not responding or does not turn on - Apple Support
Take care,
-Jason -
i switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
My phone is stuck on the black screen with the circular loading bar in the middle. How do i fix it?
My phone is stuck on the black screen with the circular loading bar in the middle. how do i fix it?
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)
If that didn't help, do a restore by connecting with iTunes. -
Could apple send me an iPad air. All my friends are making fun of me because I'm stuck with the old device and no phone. I've had app problems with apple before so I think that it would only be fair to get a newer device. Thank You Apple
First we aren't Apple just normal users just like you.
Second provide Apple a feedback or send them a mail.
Third they will never send you a free iPad Air.
If you want one you have to buy it. (go for refurbished if the device is too expensive) or look for special prices.
Contact iTunes support if you have a problem with an App. -
I have updated my iPhone tithe new software and my phone is now saying connect to iTunes I have tried to do this but iTunes is saying I need to restore my phone help! My phone will now not turn on and only shows connect to itunes
Then connect it to iTunes. Hope you backed it up, because the restore will wipe your phone.
-
i started to restore my ipod and i unplugged it and it is now frozen at a screen with the apple logo and an empty loading bar
Try:
iPhone and iPod touch: Frozen and unresponsive -
A year ago I bought an Imac to replace my broken Laptop. I have two Ipod touches. They both shared the same Library of CD and Itunes music. Until I synced the Ipod to my Itunes account on my Imac. And it wiped the CD songs from that Ipod, and just uploaded the Itunes songs. Uploading the songs Via CD isn't an option any more as I moved quite a bit, so CD's are all scratched like mad. I still have all the CD songs left on one Ipod, and when connected to Itunes I have access to the CD songs. But can't transfer them over to my Library. I'm too scared to Sync it incase I lose all my CD songs forever. Help
The music sync is one way - computer to ipod. The only exception is ituens purchases. The ipod is not a backup device.
Copy everything from the old computer or your backup copy of your old computer, to the new one. -
My ipod touch wouln't turn on because I dropped it, so I plugged it into the computer. It went into recovery mode and is now stuck on a waiting for ipod screen. The ipod shows the apple logo and and an empty loading bar. Please help. Thank you.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Can somebody help - I'm having issues with Word 2011 on my iMac!
Everytime I turn my iMac on, Word 2011 opens a new document. I have gone into System Preferences and adjusted the Login Items and have right clicked the W icon in my dock and deselected Open at Login, but it still happens!!! Without fail, when I go to use the computer - a Word document pops up - it's really, very annoying!! Please.. if someone can help, I'd be ever so grateful!
Sounds like ML's Resume Feature.
Have a look at > Understanding the Resume Feature -
I'm trying to delete files from an external disc and it doesn't let me couse this pops up:
The operation can’t be completed because an unexpected error occurred (error code -1407)
Please what does it mean? I also have a file in the trash of my mac book named something similar to: a'*.'*.'*'.*.
and this cannot be deleted either..
Please let me know what I can do.
I also have many files in the external disc that I need so I cannot do a format..
Thank you.
Best Regards
KarinHave you tried putting the file from your Drobo, onto your computer, then onto to the external hard drive?
Maybe you are looking for
-
Java webdynpro development with jdk1.5.7
hi, I have installed the CE server and the Netweaver Developer Studio, to try some java developments. I was working with jdk1.5.7, but the server has only version 1.5.017. Is it possible to upgrade the java in the server, so it can work with the curr
-
Multiple Row Selection in a data block
In a datablock i can select a row by clicking on it or by using the arrow key. For this.... I created a visual attribute(Background Color - Gray) and assigned it in the 'current record visual attribute' tab...which allows me to select a single row. I
-
Replaced hard drive but still problems
I just got my hard drive replaced on my powerbook. However when I run some internet programs there is a loud winding noise, as if it was working very hard and then the display goes black. I press the On button and it turns back on. Does anyone know t
-
My internet works fine but for some reason on one or two sites it wont load. I have an iphone and its connected to the exact same internet. And the websites load fine on that what could be the problem is it my macbook?
-
Hi I know that there was couple of similar topics but none of them seems to be solved. We have 6 AP's WAP200, all of them configured with the same SSID and diffrent channels. When i walk with a terminal or a laptop it looses couple pings when roaming