CAN SOMEBODY HELP ME WITH MY IPOD NANO PROBLEM???

I just Got My nano the other day and i put all the songs that i have into it. One Problem, After i started putting pictues in it, on my ipod in the settings/ about, the space left doesnt seem to be going down, however it goes down on the ipod info screen in itunes as i add things

Artwork takes up a relatively small amount of space (depending on the image size) so you may not notice any significant reductions in used space until you have added a lot of artwork.

Similar Messages

Can anybody help me with my ipod nano 6g?

My ipod nano 6g wont turn on. When I connect it to a power source, it only hits up. I've tried to reset it, but it doesnt work. What should I do?

Sounds like a hardware fault. That means you should either schedule an appointment at your local Apple Store's Genius Bar for replacement/repair or send it to a third party service.
There really isn't anything else you can do in terms of troubleshooting.
B-rock

Can somebody help me with an answer ?!

Hi all !!
I opened on another category one topic related to AD to OID synco.
Pull specific users from AD to OID
Can somebody help me with an answer ?
Thank you very much,
Dani

The answer has been found. See the link
Good luck,
Dani

Hi, my name is Chenet i have a Macbook 0sx lion 10.7.5 i don't remember my password for the system preferences i can't even go online, can somebody help me with that please

Hi, my name is Chenet i have a Macbook 0sx lion 10.7.5 i don't remember my password for the system preferences i can't even go online, can somebody help me with that please

Hi 'baltwo'
Thank you for your link, I already had been on this particular website this afternoon. they only discuss problems in the application and nothing about how the MS Office application installation does disturb Mac OS.
Or have I missed a special comment there?
In any case many thanks, trioloGo

Can somebody help me with deleting an array

Can somebody help with deleting an array

Hi Sansom,
If you want to delete an array rather than format a volume you need RAID Admin which can be downloaded here.
http://support.apple.com/kb/DL288 if you just want to delete the contents of the volume you can do this with Disk Utility.
You'll also need to make sure the Xserve RAID is plugged in with one Ethernet connection and is on the same network as the machine you run RAID admin on.
Then run RAID Admin and enter the password. In General the password is "private" to make changes or "public" to view the configuration.
Hope that helps
Beatle

Can somebody help me with Siebel and Fusion Integration

Hi,
I want to integrate Siebel with BPEL.
I can't use the Oracle AS adapter available for Siebel for integration purpose.
I have to integrate using web services.
Can somebody help me out with any document of integration BPEL with Siebel using WebServices??

Hi,
Find attached the link/note for integration of BPEL with Siebel, hope this will be useful
http://download-east.oracle.com/docs/cd/B31017_01/integrate.1013/b28999/intro.htm
Oracle® Application Server
Adapter for Siebel User's Guide
10g Release 3 (10.1.3.1.0)
B28999-01
Rgds,
Muru

Can somebody help me with understanding what is OSGi & JCR and how it completes CQ5 architecture

I am a newbie to CQ5 development and I want to understand more about JCR and OSGi concepts before I deep dive into the technology. Can somebody help me out with explaining these terms with reference to CQ5 architecture in layman terms so that I can understand them better.

Check out
http://dev.day.com/docs/en/cq/current/exploring/concepts.html#CQ's%20Technical%20Foundatio n
and
http://dev.day.com/docs/en/cq/current/exploring/concepts.html

Can somebody help me with infoset

Hi everybody,
Can somebody guide me with the step by step procedure to generate a InfoSet. I know what a InfoSet mean, but i doesn't know how to generate,maintain and do BEX reporting with InfoSet, can anyone help me through this.
Thanks,
sivi.

Hello Sivi,
Please go through this link to know more about how to create Infoset.
http://help.sap.com/saphelp_nw04/helpdata/en/a3/96663bd194a978e10000000a11402f/frameset.htm
Regards,
Praveen

Can somebody help me with this code?

Can anyone help me with this code? My problem is that i can't
seem to position this form, i want to be able to center it
vertically & horizontally in a div either using CSS or any
other means.
<div id="searchbar">
<div id="searchcart">
<div class="serchcartcont">
<form action='
http://www.romancart.com/search.asp'
name="engine" target=searchwin id="engine">
<input type=hidden value=????? name=storeid>
<input type=text value='' name=searchterm>
<input type=submit value='Go'> </form>
</div>
</div>
<div class="searchcont">Search For
Products:</div>
</div>
Pleasssssseeeeeeee Help
Thanks

Hi,
Your form is defined in a div named "serchcartcont", you can
use attributes like position and align of the div to do what you
want to do. But there are two more dives above this dive, you will
have define the height width of these before you can center align
the inner most div. If you are not defining the height & width
then by default it decide it automatically to just fit the content
in it.
Hope this helps.
Maneet
LeXolution IT Services
Web Development
Company

Can I use iCloud with my iPod nano and windows laptop?

not clear how to use iCloud with an iPod Nano and a Win 8.1 PC

iCloud doesn't work with the iPod nano directly, and will only work on a PC with an already-existing iCloud account; these need to be created from a Mac or an iOS device.
(125787)

Can somebody help me with migrating my mobile me ID into my ICloud ID?

Hi,
When setting up mobile me a few years ago I used a different emailaddress then I do for ICloud now. My email works perfectly fine on the IPAD?IPhone but I can not seem to get the settings right for mobileme on my Mac. This since it does not recognize the icloud email address for a mobile me mail account. Can somebody help me how to solve this?

Welcome to the Apple community.
I'm not entirely clear what it is you have done, but it sounds to me as though you have two accounts, a current iCloud account and a MobileMe account. These accounts are different, you cannot use your MobileMe address for your current iCloud account if this is the case.
You can migrate your MobileMe account to an iCloud account, but then you will have two iCloud accounts.

Can somebody help me with these errors??

Can somebody help me get rid of these errors as it is driving me mad trying to solve it lol:
package site;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.sql.*;
public class myBean extends HttpServlet {
public void doGet(HttpServletRequest request,
                    HttpServletResponse response)
      throws ServletException, IOException {
    response.setContentType("text/html");
    PrintWriter out = response.getWriter();
     Connection conn = null;
      String Category;
     String Price;
     try{
         Class.forName("com.mysql.jdbc.Driver").newInstance();
     } catch(Exception e) {
         System.out.println(e);
     try{
         conn = DriverManager.getConnection
        ("jdbc:myaddress goes in here ");
       catch(SQLException se) {
         System.out.println(se);
     try{
          // Get the infor from REGISTER html from the input form
             Category = request.getParameter("Category");
           Price = request.getParameter("MaxPrice");
String selectSQL = "Select recording_id,artist_name, title" + /////////////////put rest in later!!!!!!!!!!
                    "from music_recordings" + "where category = " + Category +" and Price <= " + price +";";
         Statement stmt0 = conn.createStatement();
         ResultSet rs0 = stmt0.executeQuery(selectSQL);
          List<VidBean> videos = new ArrayList<VidBean>();
while(rs0.next()) {
    VidBean video = new VidBean();
    video.setRecId(rs0.getInd("recording_id"));
    video.setArtist(rs0.getString("artist_name"));
    video.setCategory(rs0.getString("category"));
    // ... will put the rest in here and in dql statment
// Close the stament and database connection
         stmt.close(); }
conn.close();
     } catch(SQLException se) {
         System.out.println(se);
}The errors are:
site/myBean.java:69: '(' or '[' expected
                List<VidBean> videos = new ArrayList<VidBean>(); /// can i put t
his as a array whats <> for??
                                                    ^
site/myBean.java:56: 'try' without 'catch' or 'finally'
        try{
        ^
site/myBean.java:89: illegal start of type
        } catch(SQLException se) {
          ^
site/myBean.java:92: <identifier> expected
^
site/myBean.java:97: 'class' or 'interface' expected
^
site/myBean.java:98: 'class' or 'interface' expected
^
6 errors

package site;
import java.io.*;
import java.util.*; // added this line
import javax.servlet.*;
import javax.servlet.http.*;
import java.sql.*;
public class myBean extends HttpServlet {
    public void doGet(HttpServletRequest request,
    HttpServletResponse response)
    throws ServletException, IOException {
        response.setContentType("text/html");
        PrintWriter out = response.getWriter();
        Connection conn = null;
        String Category;
        String Price;
        try{
            Class.forName("com.mysql.jdbc.Driver").newInstance();
        } catch(Exception e) {
            System.out.println(e);
        try{
            conn = DriverManager.getConnection
            ("my address goes here");
        catch(SQLException se) {
            System.out.println(se);
        try{
            Category = request.getParameter("Category");
            Price = request.getParameter("MaxPrice");
            String selectSQL = "Select recording_id,artist_name, title" + /////////////////put rest in later!!!!!!!!!!
            "from music_recordings" + "where category = " + Category +" and Price <= " + Price +";";
            Statement stmt0 = conn.createStatement();
            ResultSet rs0 = stmt0.executeQuery(selectSQL);
            List<VidBean> videos = new ArrayList<VidBean>(); // look at finding another method instead of generic
            while(rs0.next()) {
                VidBean video = new VidBean();
                video.setRecId(rs0.getInd("recording_id"));
                video.setArtist(rs0.getString("artist_name"));
                video.setCategory(rs0.getString("category"));
                // ... will put the rest in here and in dql statment
        } catch(SQLException se) {
            System.out.println(se);
        stmt.close();
        conn.close();
}I tried javac -version but it just said it was an invalid option and give me the list of the possible options i could pick. using java -version it says:
java version "1.5.0_07"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_07-b03)
Java HotSpot(TM) Client VM (build 1.5.0_07-b03, mixed mode, sharing)

Can somebody help me with some settings?

Can somebody help me please?
It's my iPhone going a bit crazy, every time there's a notification while it's locked (you know that it's shown on the lock screen right?), my iPhone won't turn off anymore, it'll just sitting there waiting for me to turn it off or see it, I mean it kills my battery so much. I already reset my settings, but it's still doing not right. Can somebody please help me how to solve this? Thank you
iPhone 5, iOS 7.1.1

best way to isolate the problem is by connecting the SPA2102 directly to your modem...check if you are able to call out and receive calls...of course internet should be working first before you can use the phone to call out so connect a computer to the SPA2102. Once this is working just connect the Netgear behind the SPA..this will ensure that voice is always prioritized...
| isolate! isolate! isolate! |

I can't do anything with my iPod Nano, help urgently!!!

Hi!
The other day I was trying to update my iPod nano with the latest iPod software but the program went frozen so I can't do anything. I disconnected the iPod -even when in the iPod window appears the "Do not disconnect"- and I saw that all the songs I had were gone, I tried to connect it again but since that day appears the same "Do not disconnect" but in My PC only appears a new disk unity and in my iTunes doesn't appear anything. I tried to enter to the disk unity but I can't and when I disconnect the iPod, it appears a message of "nothing could be written in the unity G" or something.
Please, if somebody could help me I would thanks forever!
- Mizuno.

Try resetting the iPod: plug it into the wall charger, switch the hold button On and Off, and hold the center button and Menu for about 8 seconds. If that doesn't work, try the other 4 R's: http://www.apple.com/support/ipod/
As a sidenote: when you want to disconnect, you have to either do it through iTunes (click on the grey arrow next to the iPod icon on the left hand side of the iTunes screen), or through Windows Hardware Manager (in the taskbar on the bottom of the screen, double click the icon of a grey box with a green arrow in it-select the iPod & click Stop>OK).

Can Anyone help me with my ipod

the file i tunes library.itl cannot be read because it was created by a newer version of itunes
I updated my itunes to 7
and for goodness so much problems
with my ipod now i also installed
the updater 1.2
for my ipod 60gb using windows xp pro
now when i uninstalled the itunes 7 and used
my old cd for my old itunes6
i got this error popping whenever click the itunes
the file i tunes library.itl cannot be read because it was created by a newer version of itunes
can anyone help me fix this problem
and is this possible that i can get my old itunes back?
thanks again
have a great day

Follow thse steps to cure this problem:
Recreating the iTunes Library file
Follow these steps:
Quit iTunes.
Locate your iTunes folder.
For Mac OS X the iTunes folder is stored in one of the following locations:
/Users/username/Music
/Users/username/Documents
Note: You may need to check both locations.
For Microsoft Windows the iTunes folder is stored in
\Documents and Settings\username\My Documents\My Music\
Open your iTunes folder.
Drag the iTunes Music Library.xml to the Desktop
Drag the following file from your iTunes folder to the Trash:
Mac OS X: "iTunes Library" (in versions of iTunes prior to 4.9 this was called "iTunes 4 Music Library").
Microsoft Windows: "iTunes Library.itl" (in versions of iTunes prior to 4.9 this was called "iTunes 4 Music Library.itl")
Open iTunes.
From the File menu, choose Import.
Tip: Do not add any music into iTunes at this point.
Navigate to the iTunes Music Library.xml file on the Desktop.
Click Choose.

CAN SOMEBODY HELP ME WITH MY IPOD NANO PROBLEM???

Similar Messages

Maybe you are looking for