Can someone change property "Created by" / or steal my EP sources?

Hello everbody,
i got just a "simple" question:
Can anybody steal my developed iViews by changing the property "Created by"
(when you look at the object category's with the PCD)
I've tried out on my own that you easily can change the name and the ID. But what about the tag "Created by"...?
I am asking, because i want to verify if some sources (iviews) are from the source they told me, and not taken from somebody else?
Hope you can answer my short question!
Thanks to all!!
Greetz
Stefan
Message was edited by:
        Stefan Popescu

Hi,
there is no tool to change the created by property.
But I guess if you put some effort into it, a developer could wirte some code to change it, or you use some sql statements to modify it directly in the database.
Regards,
Sascha

Similar Messages

  • Can I change the default 'File Type' for PL/SQL Source File to '*.prc' ?

    Want to change the 'default' extension for PL/SQL source to '*.prc'
    When navigating 'File' / 'Save As', and selecting the 'File Type' list box,
    The default 'File Type' for PL/SQL Source File is '*.pls'.
    Can I change the default 'File Type' for PL/SQL Source File to '*.prc' ?
    I have followed , 'Tools', 'Preferences' , 'File Types' and added '.prc' as 'Sql Script' file type, because (PL/SQL Source) is not present in the list.

    You can certainly overwrite the 'Save As' extension as you are saving the file. I have added an ER for more control over this functionality.
    sue

  • How can you change property files of a EJB at Runtime?

    Hi,
    I have got an ejb and want to change my variables which I stored in property file at Runtime.
    But the property file isn´t in the jar-file of my ejb...
    How can I add it.
    Or How can I change the property file without new compilation.
    Thanks
    Uli

    Hi Uli,
    the previous post is generally correct, but without taking any part in the sensibility of this (there are valid reasons why you would not store the values in a DB) it would be necessary for you to be a bit more specific.
    Is your problem that you can not see the file from your EJB or that you don't know how to change a property file entry in general?
    Cheers,
    Kalle

  • Can someone help me create a vi to read and write to an EEPROM using HSDIO?

    I'm trying to create an EEPROM scanner/programmer using a PXI-6541.  I have some EEPROMs with 24 address lines and 16 data lines.  I want to scan addresses 0000h to 8000h and log the data in a file so I can program other EEPROMs with the same data.  Can someone help me get started with this, please?

    Hey jallen_100,
    It sounds like you are trying to do something similar to this Memory Test Reference Design. Check out the code linked at the bottom of the document, and try using part of the code that fits your need, and modify the rest that you don't need, or that won't work with your device. Also, are you going to be using more than the 32 channels of the one board, or will you require 2 devices? If so, then you should check out the Tclk examples, but if not then the above should be enough to get you started. Hope this helps get you started, or at least an idea of what you might be able to do.
    Regards,
    DJ L.

  • Can someone update my itunesinfa when they steal my apple itunes gift card?

    An itunes gift card was purchased for me. I loaded on my account and had store credit and bought one thing. 2 weeks later I got an email from apple saying my address was updated. the card was stolen from my office, and songs i never purchased appeared on my account. Can someone take a gift card already registered on my computer and use to download the remaining credit on their machine?

    Thanks Chris,
    maybe the card is not stolen, but how could this happen? A mistake on gift card numbers? I totally am flummoxed, and dont know where to begin ... apple sent me an email telling me my address had changed ... this is weird. I have an unsecured wireless network in an remote area ... thanks for taking the time to answer.

  • Can someone please share configFile.xml for crawling Content Server Source

    Hi All
    I am trying to create a Content Server Source in SES. I am unable to generate the configFile.xml as mentioned in doc, from UCM.
    Can someone please share the config file.
    Thanks & Regards,
    Amit

    Hi ,
    Thanks lot for replying.
    I am using the same versions. There is one xml file getting generated but its name is not configFile.xml
    In my test it generated one with df2009-04-21-20-16-22-833434567.xml name.
    Please tell me is this the correct file?.
    some contents of it are...
    Line: -----
    <?xml version="1.0" encoding="UTF-8"?>
    <rss xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    version="2.0"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xsi:schemaLocation="http://xmlns.oracle.com/orarss C:\project_drive\SES Application Search\SES Format Schma\orarss.xsd">
    <channel>
    <title>Content</title>
    <link>df2009-04-21-20-16-22-833434567.xml</link>
    <description>The channel contains a feed for content</description>
    <lastBuildDate>2009-04-21T14:46:22.000Z</lastBuildDate>
    <channelDesc xmlns="http://xmlns.oracle.com/orarss" >
    <feedType>full</feedType>
    <sourceName>content_feed</sourceName>
    </channelDesc>
    <item>
    Line: -----
    Thanks a lot... :)

  • How can I change and create new events?

    iPhoto for iPad seems to stick some naming convention for creating Events.  Is there a way to:
    1. change the Event name?
    2. Split events?
    3. Rearrange photos to certain events?
    pacpac

    It is very simple. To create an event, you can tell Siri, tell her to create events and she will ask you questions and at the end, the event will be done. Or go to the calendar and on the top right corner there should be a + and then you enter the information for the event and hit done. To edit the events, simply go tot  he calendar and tap on the event, there it will show you the information and then you can change it.

  • Can I change or create a site icon for a pinned tab?

    I want to change the site icon to one on my pinned tabs. Like a cross for my church's website.

    You can use a method similar to in this mozillaZine forum thread about customizing Firefox 4 with CSS code. You will have to create an image and convert the data to base 64 code.
    * http://forums.mozillazine.org/viewtopic.php?p=10555715#p10555715
    * http://forums.mozillazine.org/viewtopic.php?p=10540661#p10540661
    * http://webcodertools.com/imagetobase64converter/Create

  • How can I change "date created" exif on multiple images in bridge cs6?

    I want to sort images from two different cameras, but the time was set wrong on one of the cameras. I need to match the time. In order to do that I need to change the exif "date created" on all of the images from that camera by 1 hour. Is this possible?

  • I lost my iPhone can someone change the serial number or the imdi number

    Hi there!
    I lost my iphone 5 on 05th of May2014. The Find My iPhone was enabled but until to date it cannot be traced. My suspect is that the serial number and the IMEI number have been compromised. Is there a way to verify that this has been deactivated or been replaced? I also suspect that one of my co-worker got it and had this altered in a way.
    Your valuable tips or information would be highjly appreciated.
    Thanks,
    JoeL

    As long as you have Activation Lock on you should be fine
    What to do if your iOS device is lost or stolen

  • How can I change the source file so it is direct from external hard drive?

    I am trying to make a movie on imovie of a snowboarding trip that I went on, there is around 80 to 100 gig of mp4 movies that will not fit on my computer that I have stored on my external harddrive. I had the movie half finished then found I could do no more as I had no space left in my mac. I had to delete everything and start again but I'm not doing this until I can find a way of changing the source file so I can take them direct from my external hard drive as to not use up all my computers available space. I have moved imovie to my external hard drive but it still tries to read from a movie file on my mac, how can I change that so it will read from a source file on my external hard drive, is it possible?? Can someone help me??

    Hi Bengt, Thanks for your input, much appreciated.
    I have a WD 1TIG hard drive and are using usb connection, is it possible to use fire wire with these? I have had trouble with a lot of the videos I Imported, once they downloaded the file in the viewer window showed up blank and when I mouse over them it places a picture of another file in the window and wont drag and drop into the movie window, like their corrupted or something? Had to delete just about all of them and start again. Also is it possible to select a bunch of videos in the viewer window as to change the dates to the correct dates? All I have been able to do is "select all" which is no help.

  • Can i change this download func to use http service?

    This a download function i have:
         //Downloads a file and calls the writeFile func
              private function downloadFile(url:String):void{
                   var urlStream:URLStream = new URLStream();
                   var request:URLRequest = new URLRequest(url);
                   //var downloadFileName:String=getDownloadFilename(url);
                   urlStream.addEventListener(Event.COMPLETE, writeFile);
                   urlStream.addEventListener(IOErrorEvent.IO_ERROR , function (e:IOErrorEvent):void{
                   urlStream.load(request);
                   urlStream.addEventListener(IOErrorEvent.IO_ERROR, onIOError);
    I need to change the URL request to send a user/name password in the header for authentication...i can do this with a httpservice...but not a url request
    Can someone change the above code to use a http serivce? instead of a URLrequest/stream? Not sure how to do it

    You can do the same with UrlRequest as well and for that you need to make use of UrlRequest headers in order to do the authentication
    Check out this link...
    http://stackoverflow.com/questions/509219/flex-3-how-to-support-http-authentication-urlreq uest
    Thanks,
    Bhasker

  • Metadata template created in Bridge can't change "Copyright Status" property

    If I create a metadata template in Bridge CS4, select Copyright Status and set it to Copyrighted,
    any other metadata changes in the template will be applied, but "Copyright Status won't change.
    I can't even manually set the Copyright Status from within Bridge.  If I try, I get an error message,
    "This property cannot be modified."
    Here's the workaround — create the template in Photoshop or Illustrator, not Bridge.
    Open one of the images in Photoshop or Illustrator, select File Info, enter the metadata,
    and select Export.  The resulting template will be available in Bridge,
    and it can change the Copyright Status.
    A fix for this in the next incarnation of Bridge would be greatly appreciated.

    As with almost all my problems, there is apparently no solution, so I am going to try reinstalling photoshop. So can someone at least tell me what is likely to be overwritten so that I can protect it.  And where they are stored? EG Web Gallery templates?  Keywords?

  • Can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable

    can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable to go through the process. thanks.

    Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

  • I have a pre-existing photoshop created image. I am new at a job and I'm trying to change it. Can someone walk me thru this? maybe via email or messenger? thanks

    I have a new job and I have to use Photoshop for the first time. I have spent some time practicing and have figure a little out. I have a created job that I need to alter, both text and color. I can't figure out how to do any of this. Can someone please walk me thru this either in email or messenger. Thank you.

    Can you upload a screenshot that shows the layer panel as well as the image?

Maybe you are looking for

  • Help me to connect my iphone with the itunes

    when i connect it to the computer ut tell me to open my passcode on the phone before it connect but i have already open my passcod and i dont know why it still asking me please i need help

  • How do I get my games to launch?

    All of my games worked only about a week ago.  Then I started getting the message "This game cannot be launched" on some of my games.  What happened? I have plenty of room on my ipod and my computer.  Hopefully it is something that can be easily take

  • PreparedStatement and Date inputs

    Hello, Trying to recover table rows with date columns inside from mysql, I do the following without any success : String sqlFilter = "SELECT * FROM mytable WHERE startdate>=\"?\" AND startDate<\"?\""; PreparedStatement statement = myConnection.prepar

  • Newline in the mapping

    Hi Doing file to mail scenario.In that the mail content i am mapping 5 fields to target element. While testing this i am getting content as single line, But I want new line for every field. Pls help this case. MMV

  • Integration of ATG module in Enterprise Application project

    Hi, Could any one please give me steps for integrating a ATG module in a Enterprise Application.