Can someone confirm a possible bug with Universal Access?

Can someone confirm a possible bug with Universal Access?
I have a Mac Pro 3,1, 10.7.1 but if you could confirm or not this possible bug with any model.
In Energy Saver preference pane:
Set Mac to never sleep.
Set Display Sleep to ~2 minutes.
In Desktop & Screen Saver:
Set screen saver to start at ~1 minutes.
In Universal Access:
Check Enable access for assistive devices.
Check radio button Zoom to On.
Zoom in window not checked.
Confirm that Zoom works by pressing:
⌥⌘= (option, command, =).
Set screen back to normal by pressing ⌥⌘-.
Let screen sleep after screen saver starts.
Wake screen and see if ⌥⌘= still works.
Thanks … Ken

Other than the time intervals (smallest Screen Saver kick-in is 3 minutes), it works fine for me - at least I can still zoom in/out after waking the display.
Tested on two different MacBook Pro models in 10.7.1

Similar Messages

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

I never purchased an Adobe App and I'm being charged $89 for it?? Also there is a charge got $100 for storage icloud that I was OVER CHARGED for. Can someone please get in touch with me about these charges!!! I've been waiting. Thx

I never purchased an Adobe App and I'm being charged $89 for it?? Also there is a charge got $100 for storage icloud that I was OVER CHARGED for. Can someone please get in touch with me about these charges!!! I've been waiting. Thx

Change your iTS password!!!!
Are these charges from Adobe or Apple?
Are these purchases from the App Store or iTunes Store?
Contact your credit card company and dispute the charges. Apple and Adobe will do nothing for you - it is your CC issuer that can help.
As noted these are user to user discussions. None of us here work for Apple or Adobe.
Contact iTS Customer Service via these links - http://www.apple.com/support/itunes/
MJ

LXDE hangs with window theme Qt4 - can someone confirm

Could someone confirm the following problem before I file a bug report? You need lxde and Qt installed.
1. start lxde
2. open lxappearance
3. as Window Theme select Qt4, then apply
4. exit lxde
5. start again
It should then hang with a blacklighted screen.
Window themes Raleigh and QtCurve are OK.

Works fine for me. Using lxde, compiz, emerald.
(just found your post, as I was searching after noticing rounding of menu background corners isn't transparent e.g. in chromium, lxde menu)

Possible bug with iTunes 11 ?? (with Smart Playlists)

Hi folks
New to Apple Support, but after upgrading to iTunes 11 earlier today (on my Mac Mini) I've discovered a potential bug / difference in the way it operates compared to earlier versions. Can someone else try something similar and see if they get the same result - I think I read somewhere that v11 is not available on Windows yet, so I cant compare what happens there
I've imported all our CD's into iTunes, and we've set up several Smart Playlists (SP). Using the Rating setting for the songs, we can break them up into groups, eg
Rating 0 = not yet processed
Rating 1 = not interested in listening to again
Rating 2 = kids songs (for our children)
Rating 3 = christmas songs
Rating 4 = songs i like, but my wife probably wouldnt
Rating 5 = songs we both like - good for background music etc
Using Home Sharing to our iPad's rocks !!
Now, onto the bug.
Using the SP that has just songs with Rating 0, I could play any song, set the Rating to whatever, and naturally once set, that disappears from the SP
In all earlier versions of iTunes, playback would continue with the next song, so I could set that Rating, etc etc. Worked really well to churn through a chunk of songs in say 15 minute blocks
With iTunes v11, playback stops as soon as I set the Rating.
How can you help ?????????? Set up a smart playlist with whatever criteria you like - make sure you have a number of songs returned and ensure Live Updating is set, have a song playing, and make that song no longer valid for that SP. Anyone doing this in earlier versions of iTunes should have the next song begin, and if this is a bug, then those using iTunes 11 will have playback stop
Sorry for the long post, but in order to determine a potential bug, you need to describe the situation and how to test it.
Thanks for reading
PS I'm on a 2010 Mac Mini with OSX v10.7.x (whatever the current release of that is) and just upgraded to iTunes 11

Soo, maybe it isnt possible bug, but the way Apple have changed iTunes when going to v11. Stooopid
Anyway, found this link about downgrading to an earlier version. I've just completed it and found one or two "errors" in the method, which I'll detail below
http://www.emacconsulting.com/apple/itunes/downgrade-itunes-11-to-itunes-10-7/
In the latter part of the instructions
11) Open your iTunes Music Folder.
If you never moved your iTunes folder it’s located here:
Your HD/Your User/Music/iTunes
Or go to the Finder type: Command + Shift + G
Paste this into the the dialog: ~/Music/iTunes
If you moved it to another hard drive, you will know where to locate your iTunes folder.
12) Open the “Previous iTunes Libraries” folder.
13) Find the most recent copy of the “iTunes Library 2012-xx-xx.itl” file.
Normally it will the last file at the bottom of the list.
14) Drag a copy of the file into the iTunes folder.
15) Delete the “iTunes Library” file.
16) Change the name of the “iTunes Library 2012-xx-xx.itl” to ”iTunes Library” with no .itl extension.
In #11, I simply went to "My HD"/Users/"My User"/Music/iTunes
Copied the latest .itl and moved it up a directory level
The old file in #15 is called "iTunes Library.itl" - which I renamed, and renamed the copied version back to "iTunes Library.itl" = though I do have extensions showing, some people may not and hence wont see the .itl
Anyway all is fixed in my world, and when I launched v10.7, it asked me if I wanted to upgrade to v11 - I said No and not to prompt me again. Playcount issue is resulved, as is changing SmartList criteria with playback continuing
Apple - please correct these bugs before releasing any new versions of iTunes... you've made a very large number of people unhappy

Possible Bug with Drag-and-Drop Being Published via HTML5 - Getting "Undefined" Error When Dragging Object

Hello,
I came up with a way to use drag-and-drop interactions that will take advantage of file input so that I may create a drag-and-drop interaction that uses one draggable object over and over allowing multiple scoring/tracking possibilities. Example use...is having the draggable object be dynamic in that it randomly changes its text so that a learner can drag a term it's possible classification.........thus allowing the possibility of having many terms easily loaded without having to redo a drag-and-drop interaction for each needed terms/classifications updates/changes.
My Issue: When using a variable to represent the text for a draggable Smart Shape object, I'm getting the error message "undefined" when, clicking/pressing on the object, as well as during the drag of the object. This issue occurs when publishing the project in an HTML5 format. Flash interestingly enough seems to work perfect...but we are not interested in publishing via Flash any longer.
To better help you explore this error message, I've set up a test project so that you can see when and how the "undefined" message shows up during a drag-and-drop interaction. I've also included the Captivate 8 project file used to make the exploration project I'm sharing in this post.
Link to Captivate project I created for you all to explore "undefined" error message": http://iti.cscc.edu/drag_and_drop_bug/
Link to this Captivate 8 Project file: http://iti.cscc.edu/drag_and_drop_bug.cptx
It's pretty interesting how things react in this demo, please try the following actions to see some interesting happenings:
Drag the Yellow (or variable drag box) to the drag target.
Drag Black Hello square to Drag target and click undo or reset - watch the undefined message come up on the Yellow (or variable drag box).
Drag the Yellow (or variable drag box) to the drag target and then use the undo or reset.
Move both draggable boxes to the drag target and use the undo and reset buttons...
Anyhow, I know you all are sharp and will run the demo through its paces.
I'd really be very honored if anyone help me figure out how I could (when publishing out to HTML5) no longer have the "undefined" error message show up when using drag-and-drop with a variable for shape text. This technique has been well received at the college I work at...and I have many future project requests for using such an idea on a variety of similar interactions. I'd love see a solution or see if this might be a bug Adobe may be able to fix!
I tried to find a solution to the issue documented here for quite some time, but I was not able to find anyone with this problem much less attempting the idea I'm sharing in the help request - save the darn "undefined" message that comes up!
Many thanks in advance for any help and/or direction that you all may be able to provide,
Paul

Hello,
I just wanted to supply a minor update related to my drag-and-drop question/issue stated above:
I did another test using Captivate 7, and found that the undefined error (publishing as HTML5) does not appear and the variable data remains visible - except the variable data turns very small and does not honor any font size related settings.
I did go ahead and submit this to Adobe as a possible bug today.
Thanks again for any help related to this issue. If the issued documented above is solved, it will allow many amazing things to be done using Captivate's drag-and-drop for both regular type projects as well as interaction development for iBooks!
Matter of fact if this issue gets fixed, I'll publish a Blog entry (or video) on way's I've used Captivate's drag-and-drop to create dynamic learning activities for Higher Ed. and for use in iBooks.
~ Paul

Possible bug with APEX_ITEM.DATE_POPUP

Hello,
APEX 3.1 (and maybe even some previous versions).
It seems like APEX_ITEM.DATE_POPUP creates all the cells in the corresponding column with the same ID. The result is that the dates returned by every date picker, in all the rows of the column, are being placed only in the first row cell.
I searched the forum, and found couple threads describing the problem, but nothing from the APEX team acknowledging a bug. Is it a bug? If so, and if it’s not already logged, can someone from the APEX team log it as one?
Thanks,
Arie.

Hi Arie,
Thanks for you reply i dont get any error msg here in date picker the only problem wht i am facing here is when i deploy the java script date picker is not working
Please suggest me how to modify the existing code
this is function wht i am calling in the date picker
<script type="text/javascript">
function checkdates_baseline(pStartDateItem,pEndDateItem)
var sdate = document.getElementById(pStartDateItem).value;
var edate = document.getElementById(pEndDateItem).value;
if(sdate != "" & edate != "")
var m2int = {
Jan: 0,
Feb: 1,
Mar: 2,
Apr: 3,
May: 4,
Jun: 5,
Jul: 6,
Aug: 7,
Sep: 8,
Oct: 9,
Nov: 10,
Dec: 11 };
var start_year = sdate.substring(7,11);
var start_month = sdate.substring(3,6);
var start_day = sdate.substring(0,2);
var start_date = new Date(start_year, m2int[start_month], start_day);
var end_year = edate.substring(7,11);
var end_month = edate.substring(3,6);
var end_day = edate.substring(0,2);
var end_date = new Date(end_year, m2int[end_month], end_day);
if( end_date <= start_date )
alert('The End date must be after the Start Date Baseline');
document.getElementById(pEndDateItem).value = "";
</script>
and this is the SQL query where i am using and deployed the java script
SELECT
HTMLDB_ITEM.DATE_POPUP(3,1,null,''DD-Mon-YYYY'',10,8,
'' id="sdate''||rownum||''" readonly="yes"
onchange="checkdates_baseline(''''sdate''||rownum||'''''',''''edate''||rownum||'''''');"'')
"Baseline Start",
HTMLDB_ITEM.DATE_POPUP(4,2,null,''DD-Mon-YYYY'',10,15,
'' id="edate''||rownum||''" readonly="yes" onchange="checkdates_baseline(''''sdate''||rownum||'''''',''''edate''||rownum||'''''');"'') "Baseline End"
FROM
DUAL
please suggest with a code or a example how to change this, in apex 3.1
thanks
Sudhir

HT200066 Possible bug with pedals?

I am having a problem with Mainstage ever since version 3 came out.
I have three sustain pedals coming in.
They are being transmitted to Mainstage on midi channel 1.
They are sending cc#s 64 66 and 67 respectively.
I create a channel strip that is being sent to an external midi instrument
on any midi channel other than 1.
In the assignments and mappings window, I assign the pedal that is coming
in as cc66 to cc64.
The external instrument will sustain, but it does not get an off value of
zero when the pedal is released!
If I create an IAC bus and send that channel strip to a stand alone
instrument, Kontakt for instance, then open the Midi Message Monitor
window, this is what I see –
It appears that Mainstage is not sending the pedal off (0) to the external
channel (bus) on the correct channel. Instead of sending it to
midi channel 14 it is going to midi channel 1.
Can anyone confirm if this is a bug? Can you please check it yourself?

No, each of the two subpanels calls a different VI. Try it!
"Satans Little Helper" wrote in message
news:[email protected]..
> Are both your subpanels calling the same VI that contains the 3D
> graph, or are you using two separate VI's? If your subpanels are
> sharing the same sub-VI, then that sub-VI should be made re-entrant
> executable.

Possible bug with replace on clobs?

I couldn't find this documented anywhere, and wanted to check if I had data corruption or if there indeed is a bug with replace on long clobs.
Best I can figure, if you are replacing before the 32768 border and a previous replace in that clob moves the new location to be after 32768, then your clob gets clobbered in that area.
I'd like to know if this is a verifiable bug so that I feel better about having written my own replace using instr/substr.
Oracle 10g (10.2.0.1.0)
Test procedure:
======================================
declare
vclob clob;
tempc1 clob;
tempc2 clob;
pos number;
ch char(1);
begin
vclob := rpad('*', 32749, '*') || '****12345./~\.12345*' || rpad('*', 10000, '*');
for vi in 1..5 loop
ch := to_char(vi);
tempc1 := vclob;
pos := instr(tempc1, ch);
while (pos > 0) loop
tempc1 := substr(tempc1, 1, pos-1) || 'BUGS' || substr(tempc1, pos+1);
pos := instr(tempc1, ch, pos+1);
end loop;
tempc2 := vclob;
pos := instr(tempc2, ch);
while (pos > 0) loop
tempc2 := substr(tempc2, 1, pos-1) || 'BUGGY' || substr(tempc2, pos+1);
pos := instr(tempc2, ch, pos+1);
end loop;
dbms_output.put_line('Replace ' || ch || ' at ' ||
instr(vclob, ch) || ' and ' ||
instr(vclob, ch, instr(vclob, ch)+1));
dbms_output.put_line(': 32750 32760 32770 32780');
dbms_output.put_line(': 67890123456789012345678901234567890');
dbms_output.put_line('Original: ' || substr(vclob, 32746, 50));
dbms_output.put_line(ch || '->BUGS : ' ||
substr(replace(vclob, ch, 'BUGS'), 32746, 50));
dbms_output.put_line('Correct : ' || substr(tempc1, 32746, 50));
dbms_output.put_line(ch || '->BUGGY: ' ||
substr(replace(vclob, ch, 'BUGGY'), 32746, 50));
dbms_output.put_line('Correct : ' || substr(tempc2, 32746, 50));
end loop;
end;
/======================================
Output: (changed slightly for formatting)
======================================
Replace 1 at 32754 and 32764
: _______ 32750 ___ 32760 ___ 32770 ___ 32780
: _______ 67890123456789012345678901234567890
Original: ********12345./~\.12345***************************
1->BUGS : ********BUGS2345./~\.BUGS2345*********************
Correct : ********BUGS2345./~\.BUGS2345*********************
1->BUGGY: ********BUGGY2345./~\.BUGGY2345*******************
Correct : ********BUGGY2345./~\.BUGGY2345*******************
Replace 2 at 32755 and 32765
: _______ 32750 ___ 32760 ___ 32770 ___ 32780
: _______ 67890123456789012345678901234567890
Original: ********12345./~\.12345***************************
2->BUGS : ********1BUGS345./~\.1BUGS345*********************
Correct : ********1BUGS345./~\.1BUGS345*********************
2->BUGGY: ********1BUGGY345./~\.¿¿¿5************************
Correct : ********1BUGGY345./~\.1BUGGY345*******************
Replace 3 at 32756 and 32766
: _______ 32750 ___ 32760 ___ 32770 ___ 32780
: _______ 67890123456789012345678901234567890
Original: ********12345./~\.12345***************************
3->BUGS : ********12BUGS45./~\.1¿¿5*************************
Correct : ********12BUGS45./~\.12BUGS45*********************
3->BUGGY: ********12BUGGY45./~\.¿¿¿5************************
Correct : ********12BUGGY45./~\.12BUGGY45*******************
Replace 4 at 32757 and 32767
: _______ 32750 ___ 32760 ___ 32770 ___ 32780
: _______ 67890123456789012345678901234567890
Original: ********12345./~\.12345***************************
4->BUGS : ********123BUGS5./~\.1¿¿5*************************
Correct : ********123BUGS5./~\.123BUGS5*********************
4->BUGGY: ********123BUGGY5./~\.¿¿¿5************************
Correct : ********123BUGGY5./~\.123BUGGY5*******************
Replace 5 at 32758 and 32768
: _______ 32750 ___ 32760 ___ 32770 ___ 32780
: _______ 67890123456789012345678901234567890
Original: ********12345./~\.12345***************************
5->BUGS : ********1234BUGS./~\.1234BUGS*********************
Correct : ********1234BUGS./~\.1234BUGS*********************
5->BUGGY: ********1234BUGGY./~\.1234BUGGY*******************
Correct : ********1234BUGGY./~\.1234BUGGY*******************======================================

Correct me if I'm wrong. What this lines does (if there isn't a space between the two single-quotes) is removing the string represented by xmlnsVal from the string xmlDoc. I've been using this method in some situations.
But I don't know why it won't work either. However, isn't it necessary to do conversion from CLOB to varchar2 before calling replace? Maybe the implicit conversion isn't so reliable. I've seen someone did the following:
-- clobvar is CLOB
-- stringvar is varchar2(4000)
stringvar := cast(clobvar as varchar2(4000)); -- not testedAfter that you can use stringvar in your replace function.
Or alternately, if exists in 9i, you can try the function regexp_replace() instead. Good luck.

Can someone see what is wrong with this? Im stumped

   public class Card {
     int suit;
     int value;
     static int isStraight = 0;
     static int isFlush = 0;
     static int handCounter = 0;
     static int cardCounter = 0;
     boolean inUse = false;
     public int getSuit() {
          return suit;
     public void setSuit(int suit) {
          this.suit = suit;
     public int getValue() {
          return value;
     public void setValue(int value) {
          this.value = value;
     public boolean isInUse() {
          return inUse;
     public void setInUse(boolean inUse) {
          this.inUse = inUse;
    public static int checkPairs(int[] handValues){
         for (int x = 0; x<5; x++ ){
              for (int y = 0; y<5; y++ ){
                   if(handValues[x]==handValues[y]){
                        cardCounter ++;
              handCounter = handCounter + (cardCounter - 1);
               cardCounter = 0;
         System.out.println(handCounter);
         return handCounter;
    public static int checkStraight(int[] handValues){
              if(handValues[0] == (handValues[1]-1)){
                   if (handValues[1] == (handValues[2]-1)){
                        if (handValues[2] == (handValues[3]-1)){
                             if (handValues[3] == (handValues[4]-1)){
                                  ///System.out.println("straight");
                                      isStraight = 1;
                                  if (handValues[4] == 12){
                                        isStraight = 2;
              return isStraight;
    public static int checkFlush(Card[]inputHand){
         if (inputHand[0].suit == inputHand[1].suit){
              if (inputHand[1].suit == inputHand[2].suit){
                   if (inputHand[2].suit == inputHand[3].suit){
                        if (inputHand[3].suit == inputHand[4].suit){
                             isFlush = 1;
         return isFlush;
//handCheckerApp ,
import tcdIO.*;
public class handCheckerApp {
     ///these string arrays just hold the names of the values
     static String[] suitsArray = {"hearts" , "spades" , "diamonds" , "clubs" };
     static String[] valuesArray = {"two" , "three" , "four" , "five" , "six" , "seven" , "eight" , "nine" , "ten" , "jack" , "queen" , "king" ,"ace" };
     public static void main (String arguments []) {
          Terminal terminal = new Terminal();
          Card[] inputHand = new Card[5];
          Card[] deck = new Card[52];
          Card currentCard = new Card();
          for(int number = 0 ; number <= 12 ; number++){
               deck[number]= new Card();
               deck[number].suit = 0;
               deck[number].value = number;
          for(int number = 13 ; number <= 25 ; number++){
               deck[number]= new Card();
               deck[number].suit = 1;
               deck[number].value = (number - 13);
          for(int number = 26 ; number <= 38 ; number++){
               deck[number]= new Card();
               deck[number].suit = 2;
               deck[number].value = (number - 26);
          for(int number = 39 ; number <= 51 ; number++){
               deck[number]= new Card();
               deck[number].suit = 3;
               deck[number].value = (number - 39);
          terminal.println("Poker Hand Checker");
          terminal.println("~~~~~~~~~~~~~~~~~~");
          terminal.println("Suits key:..Hearts = 1");
          terminal.println("...................Spades = 2");
          terminal.println("...................Diamonds = 3");
          terminal.println("...................Clubs = 4");
          terminal.println(".............................");
          terminal.println("Values key:.Twos = 2");
          terminal.println("......................Threes = 3");
          terminal.println("......................Fours = 4");
          terminal.println("......................Fives = 5");
          terminal.println("......................Sixes = 6");
          terminal.println("......................Sevens = 7");
          terminal.println("......................Eights = 8");
          terminal.println("......................Nines = 9");
          terminal.println("......................Tens = 10");
          terminal.println("......................Jacks = 11");
          terminal.println("......................Queens = 12");
          terminal.println("......................Kings = 13");
          terminal.println("......................Aces = 14");
      ///this block of code marks cards in the deck as in use and adds them to the hand
      for(int i = 0; i < 5; i++){///for1
          currentCard.value = (terminal.readInt("please enter card " + (i+1) + " value: " )-2);
          currentCard.suit = (terminal.readInt("please enter card " + (i+1) + " suit: " )-1);
          for (int x = 0; x< 52; x++){///for2
               if (deck[x].value == currentCard.value){///if1
                    if (deck[x].suit == currentCard.suit){///if2
                        if (deck[x].inUse == true){///elseif1
                             terminal.println("you chose that card already");
                             i--;
                        }///if3
                        else if(deck[x].inUse == false){///if3
                             deck[x].inUse = true;
                             inputHand[i] = deck[x];
                             terminal.println("this card is the " + valuesArray[(inputHand.value)] + " of " + suitsArray[(inputHand[i].suit )]);
                    }///elseif1
               }///if2
          }///if1
     }///for2
     }///for1
     int handValues[] = {inputHand[0].value, inputHand[1].value, inputHand[2].value, inputHand[3].value, inputHand[4].value};
     java.util.Arrays.sort(handValues);
     ///this method checks for pairs, two pairs, three of a kind, full house & four of a kind
     Card.checkPairs(handValues);
     if (Card.handCounter == 2) {
               terminal.println("You have a pair");
          if (Card.handCounter == 4) {
               terminal.println("You have two pair");
          if (Card.handCounter == 6) {
               terminal.println("You three of a kind");
          if (Card.handCounter == 8) {
               terminal.println("You have a full house");
          if (Card.handCounter == 12) {
               terminal.println("You have four of a kind");
          } else {
               terminal.println("");
          Card.checkStraight(handValues);
          Card.checkFlush(inputHand);
               if (Card.isStraight == 1 && Card.isFlush == 0){
                    terminal.println("You have a straight");
               if (Card.isStraight == 1 && Card.isFlush == 1){
                    terminal.println("You have a straight flush");
               if (Card.isStraight == 2 && Card.isFlush == 0){
                    terminal.println("You have a royal straight");
               if (Card.isStraight == 2 && Card.isFlush == 1){
                    terminal.println("You have a royal straight flush");
               if (Card.isStraight == 0 && Card.isFlush == 1){
                    terminal.println("You have a flush");
               if (Card.isStraight == 0 && Card.isFlush == 0){
                    terminal.println("");
Okay it's not recognising deck.inUse....i can't see why.
Can someone possibly point out some suggestions. Thanks, much appreciated.

> if (deck[x].inUse == true){///elseif1
>
it's giving me an error on this If else statement...
sorry ....
How about going the extra mile and actually posting the error message you receive rather than expecting everyone to guess? The more pertinent information you can provide, the easier it is to answer your question. And you want your question answered easily and quickly, right?
~

Possible bug with creating hyperlink destination while in story editor

I'm just curious if anyone else is experiencing this and if it's proper behavior or a bug:
I'm making manual cross references for endnotes in an ebook. To do this I'm creating hyperlink destinations for each endnote and endnote reference. I'm doing this in story editor because I can see the destination targets, however, I'm having a weird issue where when I hit enter when in the hyperlink destination dialog box, it closes and puts a hard return in my text. If I'm doing this in layout mode, I don't get the hard return--it's only in story editor. Creating a hyperlink and hitting enter on that dialogue box does not have the same behavior. It's just the "New Hyperlink Destination" dialog box that does it.
Can someone else replicate this behavior: Open story editor for any length story. Select some text (doesn't matter where it is), and go to the hyperlink panel menu and select "New Hyperlink Destination" and then hit the keyboard "enter" [rather than clicking on OK] to close the dialogue box.
When I do this on my Windows 8 laptop running the latest InDesign CC 2014, I'm getting a hard return that deletes whatever text was selected in the story editor. Is this supposed to happen?

I'm just curious if anyone else is experiencing this and if it's proper behavior or a bug:
I'm making manual cross references for endnotes in an ebook. To do this I'm creating hyperlink destinations for each endnote and endnote reference. I'm doing this in story editor because I can see the destination targets, however, I'm having a weird issue where when I hit enter when in the hyperlink destination dialog box, it closes and puts a hard return in my text. If I'm doing this in layout mode, I don't get the hard return--it's only in story editor. Creating a hyperlink and hitting enter on that dialogue box does not have the same behavior. It's just the "New Hyperlink Destination" dialog box that does it.
Can someone else replicate this behavior: Open story editor for any length story. Select some text (doesn't matter where it is), and go to the hyperlink panel menu and select "New Hyperlink Destination" and then hit the keyboard "enter" [rather than clicking on OK] to close the dialogue box.
When I do this on my Windows 8 laptop running the latest InDesign CC 2014, I'm getting a hard return that deletes whatever text was selected in the story editor. Is this supposed to happen?

Can someone confirm this for me?

Can someone try running ISOBuster 1.1? (http://www.isobuster.com) Without a BSOD of NO_MORE_IRP_STACK_LOCATIONS?
How about Windows Component Update? Without a BSOD of the same error?
It seems this stupid BSOD plagues me and keeps me from installing Visual Studio.
I've tried the Registry Tweak and it still happens.
I've tried different BIOS's with clean installs.
I've tried different drivers with those different BIOS's with clean installs.
I'm stumped and sad...

Have you recently installed a new virus scanner?
Winntmag has this to say : http://www.winntmag.com/Articles/Index.cfm?ArticleID=3396
NO_MORE_IRP_STACK_LOCATIONS 0x35
With this code, if you've added a new virus scanner or someone has accessed a shared volume over the network for the first time on the machine, the Server device driver can be at fault. The Server device driver constructs I/O request packets with a slot for every device driver on the path to the disk. Sometimes the number of I/O request packets the Server device driver allocates is insufficient, resulting in this Stop Code. Try increasing the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ServicesLanmanServer\IrpStackSize setting to a number higher than 4 (or whatever it's set to) and see whether the problem goes away

Possible bug with Triggers tab

Hi there,
I'm using 1.0.0.12.15 and think there is a bug with the triggers tab. When I navigate to my table (which has one trigger on it), and then click on the Triggers tab, the trigger shows up multiple times. It's probably not a coincidence that it shows up the same number of times that there are columns :)
Looks like a missing join condition somewhere.
Hope this helps

Tracked this one down too...
SQL Developer is getting the triggers like this:
Select dt.trigger_NAME, dt.trigger_type, dt.triggering_Event, dt.status, do.object_id , do.owner sdev_link_owner, dt.trigger_NAME sdev_link_name,'TRIGGER' sdev_link_type
from all_triggers dt, all_objects do
where do.owner = :OBJECT_OWNER
and dt.owner = :OBJECT_OWNER
and dt.trigger_name = do.object_name
and dt.table_name = :OBJECT_NAME
However, we got other objects (mainly tables) with the same name as the trigger. Not specifying the object type will identify them the same way as the trigger, resulting them all to be included in the select!
Adding "and do.object_type = 'TRIGGER'" will solve the problem.
K.

Optimistic Locking - Possible bug with Weblogic

After extensive testing of a j2ee application Im involved with, it would appear their exists a problem with using Weblogic's Optimistic Concurrency (OL) mechanism.
The exact problem is as follows:
The ejbCreate and ejbRemove methods of a particular entity bean are as follows:
public abstract class ProductBean implements javax.ejb.EntityBean {
ejbCreate(){
FolderEntityHome folderEH = FolderComponent.getFolderEntityHome();
folderEH.create(getId());
ejbRemove(){
FolderEntityHome folderEH = FolderComponent.getFolderEntityHome();
try {
FolderBean folderEH.findByProductId(getId());
catch(InvalidAccessRightsException iare)
throw new RemoveException();
Previously before OL was added when a RemoveException was thrown, this would cause the ejbRemove exception to fail, thus both the product and folder would still exist.
After adding OL, when an InvalidAccessRightsException occurs giving rise to a RemoveException being thrown, weblogic simply ignores the RemoveException and deletes the Product even though the Folder could not be deleted. This causes system errors when users try to access the folder which contains a link to a product which no longer exists!
Is anyone aware of this particular problem? Is it indeed a bug with Weblogic? For clarity, I believe I am using version 8.1 and the way in which I have implemented OL is to use an additional version column in the underlying tables for all entity beans.

In case anyone's interested, it appears from further testing that the problem I've been having in the way the RemoveException behaves is down to the difference in which version 6.0 treats this exception compared to version 8.1!
In version 6.0, if you threw a RemoteException at any point in the ejbRemove(), the entity would not be removed!
In version 8.1, something wierd happens. If a RemoteException() is thrown in the ejbRemove() and sometime during the same transaction at the point of commit, the entity on which the exception is thrown is attempted to be accessed (through a finder), then the entity continues to be deleted! If on the other hand, a RemoveException is thrown and no access/modification is attempted on that entity within the same transaction, then at the point of commit, the entity is not removed!
Seems this is indeed a problem which needs to be addressed in future releases.
Message was edited by:
rotan_imretxe
Message was edited by:
rotan_imretxe

Can someone tell me the problem with my Firefox browser?

every time i try to open it, it doesnt work and it looks like this..
http://prntscr.com/4yt5zx
Yes i already restarted my computer, i also uninstalled firefox and re installed it.

Getting a black screen after updating to Firefox 33 can be caused by a problem with hardware acceleration in Firefox.
You can start Firefox in <u>[[Safe Mode|Safe Mode]]</u> by holding down the Shift/Options key (Safe Mode disables hardware acceleration).
You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
Note that there is a Firefox 33.0.1 release scheduled that addresses some hardware acceleration related crashes.

Can someone confirm a possible bug with Universal Access?

Similar Messages

Maybe you are looking for