Can someone delete my post/question for me?

I just recently generated my first question and accidentally, I posted the question twice creating a duplicate. When I posted, the next page didn't load and I went back in my browser and posted again. I should have checked that it was posted, but I didn't, so it got posted twice.
Here is the URL for my post:
http://discussions.apple.com/message.jspa?messageID=7537115#7537115
Please don't delete it if there are replies, though! Thank you!

*Hi ...test, Welcome* to Apple's Users Help Users Forums.
In particular it looks like you have changed alias name as ...test does not show up in those links. I doubt the mods are going to bother hunting down who you were etc.
Yes, starting a *new thread* is frowned upon. In some forums, Macfixit for eg, the mod will quickly pick the best one and quit the other one—maybe transfer over any responses. Mods = Hosts are not so quick on that in these Apple Forums.
Reposts in a *given thread* happen all the time. Sometimes it's Apple's fault through a server glitch. Sometimes it's the poster's ISP's fault. If Poster sees it within 15 minutes they can edit it to "Oops double post. " and let it go at that. I recall recently seeing 3 in a row. Reader just scrolls past and goes on w life. No big thang. Don't loose any sleep.
Good Luck, JP

Similar Messages

HT1476 Can someone answer a battery question for me please?

will the iPod 4th generation battery work in my iPhone 3GS?

The batteries in the iPods and iPhones are NOT user serviceable. We cannot give you support on that here. You can try looking at a site like ifixit.com.
Keep in mind that replacing a battery on any iDevice, other than by Apple voids any support on that device forever. In addition, Apple does not sell parts, and you have no assurance as to the quality of the battery you will be receiving.
Best,
GDG

Can someone suggest some good books for sql reporting services (SSRS) 2012 or above?

Hi Everyone,
Can someone suggest some good books for sql reporting services (SSRS) 2012 and above? I ave been working on ssrs for past 2 months and have a basic understanding of ssrs.
Regards
Regards

Hi,
you can look for below options;
http://www.amazon.in/Microsoft-Server-Reporting-Services-Recipes/dp/0470563117#reader_0470563117
http://www.goodreads.com/book/show/18147604-learning-sql-server-reporting-services-2012
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

Can someone translate a BSOD message for me?

i received this BSOD error while simply resizing some images within photoshop today. as i do not understand the language, it is difficult for me to know what the exact problem is. i think it might have had something to do with google desktop, which i have since removed. i also had an external drive (not my own) that was making some funny noises (and i recall this person saying there were some weird issues with it crashing her own computer or something to that effect). anyways, can someone make sense of this for me:
Tue Mar 18 17:08:53 2008
panic(cpu 1 caller 0x001D88CA): "vnoderefext: vp 0xadf5250 has no valid reference 0, 0"@/SourceCache/xnu/xnu-1228.3.13/bsd/vfs/vfs_subr.c:1422
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x6825b648 : 0x12b0e1 (0x457024 0x6825b67c 0x13321a 0x0)
0x6825b698 : 0x1d88ca (0x464988 0xadf5250 0x0 0x0)
0x6825b6c8 : 0x1dc798 (0xadf5250 0x0 0x0 0x10000f9)
0x6825b748 : 0x31d704 (0x0 0x34 0x6825b79c 0x95dbe30)
0x6825b7e8 : 0x33d601 (0x6e18004 0xadf5250 0x6825b884 0x95dbe4c)
0x6825b8c8 : 0x340615 (0x6e18004 0xc52d3b0 0x6825b94c 0x1)
0x6825b968 : 0x1f1707 (0x6825b98c 0x1f5 0x1f5 0x1d81a4)
0x6825b9b8 : 0x1f41dd (0xc52d3b0 0x6825ba4c 0x7936364 0x0)
0x6825ba18 : 0x1eace5 (0xc52d3b0 0x6825ba4c 0x7936364 0x1)
0x6825bb48 : 0x1e3042 (0xc52d3b0 0x6825bd0c 0x0 0x0)
0x6825bd88 : 0x1e33d9 (0xb02a9ae4 0x0 0x0 0x0)
0x6825bf48 : 0x1e3472 (0xb02a9ae4 0x0 0x0 0x0)
0x6825bf78 : 0x3dbe77 (0x747fc20 0x7936260 0x79362a4 0x77002e8)
0x6825bfc8 : 0x19f084 (0x769d760 0x0 0x1a20b5 0x810fba0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb02a9ba8
BSD process name corresponding to current thread: GoogleDesktopDae
Mac OS version:
9C31
Kernel version:
Darwin Kernel Version 9.2.0: Tue Feb 5 16:13:22 PST 2008; root:xnu-1228.3.13~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
thanks in advance!

Try getting rid of Google Desktop. By "getting rid" I mean completely uninstall it.
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Most applications create preference files which are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can located them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.
There are also several shareware utilities that can uninstall applications:
AppZapper
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at www.versiontracker.com or www.mackupdate.com.
For more information visit The XLab FAQs and read the FAQ on removing software.

Can someone just spell it out for me? Going from FCP HD to DVD SD :-(

Hey folks. I hate to come here and ask a gargantuan number of questions, but this has been driving me out of my mind. I've tried asking specific question in hopes of simply finding one little problem that will fix my woes, but now it has come to this:
Can someone just spell it out for me?
How do I get my DVD going? I'll fill you in with all the knowlege I think you need.
I shot with Sony's HDR-FX1 and edited in Final Cut. That means I'm working with High defintion. The movie is set and solid, and runs One hour and twenty mintues. I'm trying to get it, the commentary track, the subtitle track, and a slew of video files (also shot in high def) onto one dvd. This goes beyond the 4.8 gig limit. Hence, i have a Dual layer burner, and have been burning onto DVD-R DL disks.
I've tried downgrading to SD format through steps from this website:
http://www3.telus.net/bonsai/Step-by-Step.html
I do all the steps to all of my files, and then start putting them into my DVD STUDIO PRO project. I have a recorded commentary which I add in, and I have written all the subtitles. The disk is in SD mode, and everything fits onto the dual layer disk. I've tried literally a dozen different ways, and something keeps going wrong. Either the menus won't come up, and just the film will play upon inserting, or the subtitle stream doesn't pick up- problem after problem. So, now I ask: Can someone simply spell out to me what steps I need to take to get my HD film onto a Dual Layer SD disk?
I apologize for how general this question is and how many directions it can go, but I'm at a breaking point after four months of failures. Thank you very much.

Hi man.
I don't really know which ways you've taken to put
the video into dvd studio, but since you're asking
for a step by step process, then here's what i do:
- export the entire hour out of FCP to a qt file
- take that QT file to compressor. the only audio you
really need is dolby 2.0. this would also reduce the
file size of video to make things fit in a single
layer dvd
I have always found that the 'Dolby 2.0' and '5.1' AC3 settings in Compressor badly affect your audio mix...it collapses the soundstage, takes away a lot of depth and imaging, and smudges the frequency range, so I usually output a 16-bit 48kHz, which holds things together much more nicely when working with a stereo mix. Problem is, for a feature-length films, the resulting output from compressor makes it too big to fit on standard DVD-R's with the M2V picture file. My workaround was to actually take take the original exported FCP QT movie (which has a 48kHz aiff soundtrack to begin with), and only lay the audio part of it in the track timeline in DVD studio pro, then lay the compressed M2V video on top of it. They're both still in sync, unless you picked different in/out points in Compressor. When you 'build' your Video/Audio TS in 'advanced burn' it somehow makes it small enough to all fit onto a DVD, while still maintaining the audio quality of the AIFF, instead of the crappy-sounding 2.0 AC3. Then you just use Toast to burn your disc. The difference in sound quality is night and day. So basically I do the picture in Compressor, but let DVD Studio Pro prepare the audio in the Advanced Burn stage.
It will be very difficult to get a good-sounding AC3 (what they call 'dolby' 2.0 or the wierd 5.1 encoding they use) unless you mix/master/encode your soundtrack professionally like regular studio films do. Just encoding it in compressor straight out of FCP or ProTools isn't enough. You lose too much.

How can I change my security questions for itunes

how can i change my security questions for itunes

See Kappy's post here:
TS3297 how to change or reset my security questions
or the User Tip: https://discussions.apple.com/docs/DOC-4551

How can you change your security question for I tunes?

How can you change your security question for I tunes?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

Can we delete the views created for a user in Oracle BPM J2EE WL

I am using Oracle BPM 10.3 MP2 Enterprise Edition
Version: 10.3.2
Build: #100486
Can we delete the views created for a user in workspace?
Usually we are using the filter option within workspace and then saving it as view.
Would like to know if we can delete such views and create again.
These views are user specifc
Thanks in Advance.
-Sree

I usually use this scripts to clean the workspace user custom seetings:
delete from fuego_objclassinst where fuego_objclassname = 'bea.albpm.workspace.layout';
delete from fuego_strprops where (fuego_category = 'fuego-view' OR fuego_category= 'fuego-presentations');
delete from fuego_strprops where (fuego_category = 'WAM' );
Hope this help.
Regards

HT1459 Locked my ipod and its says Ipod is disabled connect to itunes. Have tried to unlock it - can someone please type the instructions for me to follow - thank you

Locked my ipod and it says ipod is disabled connect to itunes - have tried everyting - can not rememb er password - can someone please type good instructions for me to get back in - thank

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

I can't remember my security question for my Apple ID. But when I press "send reset request to email" my email won't recieve it. What should I do?

I can't remember my security question for my Apple ID. But when I press "send reset request to email" my email won't recieve it. What should I do?

Wait a few hours and check the spam filter. If you still don't get it, ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(102290)

HT5622 i can't remember the security questions for my apple id ?

i can't remember the security questions for my apple id ?

The Best Alternatives for Security Questions and Rescue Mail
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contact Apple support.
    c. Rescue email address and how to reset Apple ID security questions.

How can I change my security questions for my Apple ID. I can't seem to get the questions correct at the moment

How can I change my security questions for my Apple ID. I can't seem to get the questions correct at the moment

The Best Alternatives for Security Questions and Rescue Mail
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contact Apple support.
    c. Rescue email address and how to reset Apple ID security questions.

How can I edit my security questions for my apple id? I made them so long ago...I can't remember the answers.

How can I edit my security questions for my apple id? I made them so long ago...I can't remember the answers.

You must contact iTunes Store Support for that problem.
Do that by starting here: http://www.apple.com/support/
Navigate the pages as follows:
Under "Contact Us" click the blue "Contact Support" link
Click the blue "Get Started" button
Click "More Products & Services"
Click "Apple ID"
Click "iTunes Store, App Store or Mac App Store"
Click "Forgotten Apple ID security questions"
Click "Continue"
Choose one of the support options that appear.

How can I change my security questions for my apple/itunes account?

How can I change my security questions for my apple/itunes account?

Click here for information. If you can't reset them through the method described in that article or by sending yourself a rescue email(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section.
It isn't possible to create a rescue email address without correctly answering two of the questions. Nobody on these boards can reset them for you.
(95224)

Hello, how can i change my security question for my apple ID

Hello, please can you tell me how can i change my security questions for my apple ID. thanks UdoH

The Best Alternatives for Security Questions and Rescue Mail
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contact Apple support.
    c. Rescue email address and how to reset Apple ID security questions.

Can someone delete my post/question for me?

Similar Messages

Maybe you are looking for