Can someone explain my POP mail/GMAIL

Hey,
I have no unread messages in my inbox and a total of 70 emails. When I sync it up with my iPhone, they all come back as new and it says I have 800 unread emails! What's going on? When I sync with Outlook it's fine. I also set it to "Enable POP only for mail that arrives from now on" on the GMAIL settings. Does anyone know what's going on?

It's really quite simple:
Gmail's organizational structure is based on meta tags rather than hard folders like Yahoo! or .Mac mail. That said, Gmail's folders are virtual, with only one real "folder" containing all your mail - new, archived, and even sent - in what looks like a giant Inbox.
That said, when a POP client accesses Gmail's servers, it downloads everything in that big folder. The biggest flaw in Gmail's POP interface is that Sent messages get downloaded into the client's inbox. Using most POP clients, you can specify a rule that any incoming mail from "Your Name" gets moved to the Sent folder and marked as read. Unfortunately, the iPhone doesn't support rules yet.
The settings that work for me on the iPhone are as follows:
Settings -> Mail -> Show: 25 Recent Messages
Settings -> Mail -> Gmail -> Advanced -> Use Recent Mode
Settings -> Mail -> Gmail -> Advanced -> Delete From Server: Never
If you want to use hard folders, Y! IMAP or .Mac IMAP may be the way to go. You can have Gmail forward to those accounts, and set rules in those accounts to direct which folders the incoming mail goes to.
Hope that helps!

Similar Messages

  • Can someone explain "copy address" in Mail?

    I have never understood why when you click on an address in an e-mail and then select "copy address" what you get is not only the address but also the name. For  instance,  "[email protected]" when you copy and paste yields "Name <[email protected]>".  This is a royal pain because if I for instance want to paste this in another application like in the address field for Evernote to send a note to someone, I then have to manually remove everything but the actual e-mail address.
    So can someone explain why Mail does it this way?  What am I missing?  Is there an easier way to copy just the e-mail address that won't give me the extra crap? 

    Ferd II wrote:
    Dan,
    10.6: Change Mail's 'Copy Address' behavior - Mac OS X Hints will also work for Mountain Lion.
    Outstanding!  And I love the commentary, "incredibly irritating".  This is one of those, "what were they thinking?" changes.  There must be some logic behind the change but I have never figured it out. 
    Glad someone figured out how to fix it.

  • TS4002 Can someone explain why the search facility in my icloud mail is do f*&£ing S&*t?  It never works, whether I access it in Google Chrome or Firefox. *****

    Can someone explain why the search facility in my icloud mail is do f*&£ing S&*t?  It never works, whether I access it in Google Chrome or Firefox. *****

    SeamusUK wrote:
    Can someone explain why ....
    Probably not.
    If you have any suggestions that you think might enhance iCloud you can send Apple your feedback here.

  • Can someone explain this difference in Mac vs Win policy ?

    I can download a MathScript module for evaluation with the Windows evaluation version, but for the Mac, I have to first buy LabVIEW (the module is free, just can't be evaluated). Can someone explain the logic behind this nonsense ?

    NI's activation platform doesn't work on the Mac or Linux operating systems. We created a "special" evaluation version of LabVIEW for the Mac, but after the 30 days, it requires you to uninstall it and install the regular version of LabVIEW, which doesn't have activation.
    VISA is offered as a free download because it a device driver, and by practice, all of NI's device drivers are free. However, the MathScript RT Module is an add-on for LabVIEW. The reason that the Mac and Linux versions are free is because we don't have LabVIEW Real-Time for Mac or Linux, and the real-time capabilities for the LabVIEW MathScript RT Module are the primary reason for the cost of the Module in the first place. This ability to deploy custom .m files to embedded hardware, and run them deterministically, as well as the plug-in tools to do profiling and testing, is a huge differentiator for MathScript on the Windows platform. However, that functionality doesn't exist on the Mac or Linux platform.
    The reason you can't download the Module is because we need to be able to track who the users are. Each new release of LabVIEW brings a new version of the MathScript RT Module, and we physically mail the new media to all of the users who have "purchased" the free Module, just like with any purchased Module. If we simply said go download it, then each person would have to go re-download it with each release.
    "Go stuff yourself" is certainly not the intention. You will be able to use the Mac version of MathScript (free) on the evaluation version of LabVIEW for Mac. To find this version, navigate to http://www.ni.com/trylabview/ and choose to "See Download Options". The mac version is linked within this page.
    I hope you find this information both helpful and satisfactory.
    Jeffrey P.
    LabVIEW Product Management
    National Instruments

  • Can someone explain how to set up an administrator account so that I can have my phone and my daughters have separate apple ids?

    I mistakenly updated to the latest version of iOS and ever since then I can send messages to my daughter and I receive them but she does not.  She has an iphone also and her phone is under my apple id also.  Someone told me that I could set up an Administrator Account so that she can still be under my account but she has her own ID and that will fix the problem with text/imessages.  I can't find anything on the website that explains how to do that.  Can someone explain that to me?
    Thanks!

    I'm still not clear on what you are trying to accomplish. If you have an iPhone and she does as well you should have your own Apple IDs.
    If you want to pay for any purchases she makes with her phone as far as apps/music goes than that is what Family sharing is for.
    In my case my Wife and I are setup for family sharing. When she purchases music/apps it charges my credit card. This setup also allows me to share my past music/app purchases with her and vice versa.

  • Please can someone explain how to delete email addresses?  I have people who when I type in their name it comes up with the correct email address but then when you hit return to confirm it promptly changes the name to someone else (always the same someone

    Please can someone explain how to delete and email address that when typed in brings up one name but when you hit return to confirm it jumps to another name.  I can't find them in my contacts list but they do come up when you type the first few letters of a name.
    EG If I type xyz and the name of the person comes up, when I press return to confirm that's the one I want then it jumps to [email protected],  always the same def address.
    I can't fathom it out.
    Thanks
    Terri

    Try this:
    Start a new email.  In the To address bar, type in xyz like you normally do, press return to confim, and when the address you want to remove shows up in the address bar, move your cursor over the address you want to delete.
    A small triangle next to the name will show up.  click on it, a drop down menu will open, click Remove from Previous Recipients List.  Then do the drop down menu again and Remove Address.
    Good luck.

  • How can i change a pop mail a/c into an imap a/c on my ipad2 without deleting the pop a/c and losing everything?

    how can i change a pop mail a/c into an imap a/c on my ipad2 without deleting the pop a/c and losing everything?

    Ernie Stamper wrote:
    If the Inbox for this account only is revealed, is there any triangle beside it?
    Ah, yes, I see! Silly me to be looking for Sent mail under "Sent"! Indeed, there's a disclosure triangle next to the account name under "Inbox", and wen you open it, it shows Drafts, Sent, spam, and Trash. The sent items are indeed there.
    Mind you, my Dot Mac accounts show up normally, i.e., their sent mail goes under "Sent". Wish all IMAP accounts did that. It sure isn't logical to show sent mail inside an inbox...
    But to answer your question: In addition to having the "Sent" folder for the account under "Inbox", I also have a folder for the account under "Sent". This folder disappears when I check the box to store messages on the server. There were emails in it (the ones I placed there myself). I have now moved those emails to the sent sub-folder under the account under "Inbox". Even with the "store on server" option UNchecked, the emails were instantly duplicated to the server, so that they were present both locally and remotely. I then checked the "store on server box"; this made the mailbox for the account under "Sent" vanish.
    To summarize: things appear to work normally now, except that I find it very inconvenient to have to look in two separate "Sent" folders to find emails I've written.
    Daniel

  • I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this.

    I have a lot of various book mark folders with websites contained within each folder. I am able to sort the websites within each folder alphabetically by name but I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this other than manually dragging them as this is extremely hard for me due to the fact that I am a quadriplegic with limited hand movement dexterity

    Bookmark folders that you created are in the Bookmarks Menu folder. "Sort" that folder.
    http://kb.mozillazine.org/Sorting_bookmarks_alphabetically

  • Trying to understand RSTP - Please can someone explain this?

    Hi Group
    I am still confused about how RSTP is implemented. From what i understand the major difference is that STP
    used Timers for Loop prevention whereas RSTP coordinates between neighbors via messages (proposal/aggreement) to turn on links
    more quickly after topology changes and is "timer free".
    However, I have not noticed any difference in the configuration from the legacy STP
    configurations and the RSTP configuration on cisco devices. Or are there any differences??
    I have read in documentation that RSTP natively includes features like UplinkFast, BackboneFast and PortFast. So are these features now obsolete
    and not needed to be configured if you are running RSTP. (Although i have seen Portfast still configured along with RSTP on many switches)
    Also can someone explain the below Points from Cisco Documentation
    1) should STP be disabled on edge ports all together as suggested below?
    "STP edge ports are bridge ports that do not need STP enabled, where loop protection is not needed out
    of that port or an STP neighbor does not exist out of that port. For RSTP, it is important to disable STP
    on edge ports, which are typically front-side Ethernet ports, using the command bridge
    bridge-group-number spanning-disabled on the appropriate interface. If RSTP is not disabled on edge
    ports, convergence times will be excessive for packets traversing those ports."
    2) It seems RSTP relies on duplex setting to determine inter-switch links. What is the configuration to explicitly
    configure RSTP link types? (I couldnt find this in the documentation)
    "RSTP can only achieve rapid transition to the forwarding state on edge ports and on point-to-point links.
    The link type is automatically derived from the duplex mode of a port. A port that operates in fullduplex
    is assumed to be point-to-point, while a half-duplex port is considered as a shared port by
    default. This automatic link type setting can be overridden by explicit configuration. In switched
    networks today, most links operate in full-duplex mode and are treated as point-to-point links by RSTP.
    This makes them candidates for rapid transition to the forwarding state."
    Also i am a bit rough on my RSTP knowledge even after skimming a few Cisco documents. Can someone please explain this in simple way.
    Thanks in advance

    to configure it on a device:-
    spanning-tree mode rapid-pvst
    PortFast/UplinkFast & BackboneFast were cisco "Enhancements" to 802.1d STP. RSTP just incorperates them. If you want to configure portfast, the command is still "spanning-tree portfast"
    OK
    1) That is your choice - I have bitter experiance of users/IT admins just plugging hubs/switches in when ever they can. Also cabling the switch back to itself creating a cabled loop. So my advice to you is to leave STP enabled on all switch ports, BUT enable BPDUGuard - this is a life saver, if you have configured portfast.
    2) duplex auto! or duplex full (overiding)
    I really suggest that you read the 802.1d standard, once you understand normal spanning-tree - RSTP will come to you.
    http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html')">http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html')">http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html')">http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html
    http://en.wikipedia.org/wiki/Spanning_tree_protocol')">http://en.wikipedia.org/wiki/Spanning_tree_protocol')">http://en.wikipedia.org/wiki/Spanning_tree_protocol')">http://en.wikipedia.org/wiki/Spanning_tree_protocol
    HTH>

  • Can someone explain me this?

    Can someone explain me why LabVIEW embeds the graphic in sheet 1 if i specify location as "prueba"? The vi is for LV 5.0.1f1 and Excel 2000, it just creates a workbook, adds some data and creates a chart. I've tried to ask a NI engineer but i receive no answer.
    Thanks,
    Gorka
    Attachments:
    Untitled.llb ‏430 KB

    Hi Gorka,
    I am not sure if this helps but the help file for the add Sheets method says
    "Add Method (Sheets Collection)
    Creates a new worksheet, chart, or macro sheet.
    Syntax
    expression.Add(Before, After, Count, Type)
    expression Required. An expression that returns a Sheets object.
    Before Optional Variant. An object that specifies the sheet before which the new sheet is added.
    After Optional Variant. An object that specifies the sheet after which the new sheet is added.
    Count Optional Variant. The number of sheets to be added. The default value is one.
    Type Optional Variant. Specifies the sheet type. Can be one of the following XlSheetType constants: xlWorksheet, xlChart, xlExcel4MacroSheet, or xlExcel4IntlMacroS
    heet. The default value is xlWorksheet.
    Remarks
    If Before and After are both omitted, the new sheet is inserted before the active sheet.
    *******" (I added asterisks for emphesis).
    the help for the "location method" says,
    "Add Method (Sheets Collection)
    Creates a new worksheet, chart, or macro sheet.
    Syntax
    expression.Add(Before, After, Count, Type)
    expression Required. An expression that returns a Sheets object.
    Before Optional Variant. An object that specifies the sheet before which the new sheet is added.
    After Optional Variant. An object that specifies the sheet after which the new sheet is added.
    Count Optional Variant. The number of sheets to be added. The default value is one.
    Type Optional Variant. Specifies the sheet type. Can be one of the following XlSheetType constants: xlWorksheet, xlChart, xlExcel4MacroSheet, or xlExcel4IntlMacroSheet. The default value is xlWorksheet.
    Remarks
    If Before and After
    are both omitted, the new sheet is inserted before the active sheet.
    Just trying to help,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • CAN SOMEONE EXPLAIN ME THE DISPLAY QUALITY

    I have just purchased a new macbook pro 15" 2.4ghz. Im a designer, i havent even created my appleid, im on my sisters... i made a sacrifice to buy this $2700 laptop.
    and Im so dissapointed...
    I CANT SEE SMOOTH GRADIENTS.. all i see are ugly lines... i dont get it, for such a high class LAPTOP.
    Apple support please help me solve this. ive been reading forums about 6bit screens for this laptop.. i dont want to believe that. can someone explain? im returning this...

    I can verify that all of Apple's laptops use 18 bit (6 bits per Red, Green Blue) color, which is about 260,000 colors. The OS then using dithering to fake the missing colors. Despite what you have read, they are incapable of 24 bit 'millions of colors'.
    The problem with this argument is that, when it comes down to it, the color displays are made up of dithered red, green, and blue elements anyway. We accept that this form of display gives us "full color", so it's difficult to argue that millions of colors can't be represented using the same mechanism. It's not quite 16.7 million (more like 16.3 or something) but Apple's text has always taken care to read "millions of colors" rather than 16.7 million (which you'll still see on the specifications for the Cinema displays).
    Just for informational sakes though, these kinds of 6-bit displays don't rely on OS spatial dithering; they actually make use of their very fast switching to perform temporal dithering, switching a pixel between two shades very quickly to generate an in-between shade. That's why for most people the result is usually visually indistinguishable from true 8-bit color, and doesn't look like what you'd see with traditional dithering.
    If the OP is noticing severe banding on gradients, it's more likely to be an issue with color profiles than with the display being 6-bit.

  • Can someone explain European use of 3G in a new iPad?

    Can someone explain European use of 3G in a new iPad? Will it work in Europe? I am concerned.
    Will the keyboard, charger, case, dock from iPad2 work with the new iPad?

    yeah everything apart from LTE(4G) and the charger itself (if you buy it USA) will work

  • Can someone explain the use of a hashtable in java?

    can someone explain the use of a hashtable in java?

    Hashtable allows us to store values along with keys.
    One other advantage is, it provides Synchronised methods.
    Hope you got it.

  • I am getting cross border fee charges on my credit card that I believe to be assessed against my monthly fee, can someone explain?

    I am getting cross border fee charges on my credit card that I believe to be assessed against my monthly fee, can someone explain?

    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Can Someone Explain the order of things Using Swingworker?

    Hi:
    Can someone explain very clearly the order of things using Swingworker? Please do not refer the SUN tutorials. I am totally dead in the water with a very large application and the order of things is not sensible. Also, if the worker thread is too long, the GUI gets updated, but my progress bar (killed right after in the finished method) remains running in some instances only.
    Can someone explain any debugging methods for thread work?
    I am a veteran programmer of 19 years and this one's got me. The event dispatch thread returns immediate, the GUI responds well, but the progress bar setVisible(false); ... just after in the finished() method (on Event Dispatch thread) does not go away, continues running, only on very long (large query) work. I'm truly stumped. I have successful applications of the Swingworker use, the progress bar, and everything works fine. Not this one.
    Debugging threads is what I need. Or some tool that visually shows threads as the program runs.
    Thanks for any help,
    PiratePete

    Thanks. I guess I should count my blessings when using free stuff. But I have been impressed with what the J2SDK has to offer. I have been writing a complicated application that I am going to market and most of my problems have been "design" in nature.
    Thanks again,
    PiratePete

Maybe you are looking for