Can Someone Explain "Skipped Due to Deletion" for Individual Shows?

I have seen posts regarding "Skipped Due to Deletion" for series shows, but nothing that answers why this happens to individual shows. Sometimes, I have set up a recording for an individual show, and I will get a message "Skipped Due to Deletion." I never tried to delete the show, I normally do not have two shows being recorded at the same time, so I am not sure why this is happening. There are times I will have missed a recording completely because of this.
I have gotten this message sometimes when a show has been moved out of a time slot. For that, I can understand. However, I don't understand why this happens when a show has remained in its time slot.
Does anyone know why this happens for individual shows (not series shows) and if there is something to do to stop this from happening? I must say, I never had this problem when I had satellite. Thanks.

I have seen it happen due to a "glitch" in the guide. The guide (for some unkinown reason) drops the show, the DVR sees it doesn't exist and marks as skipped, and then the show returns to the guide but the DVR doesn't activate it. Can't think of any other reasons and can only suggest that you keep an eye on your scheduled recordings (which you shouldn't have to do).
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

Please can someone explain how to retrieve deleted text, I was clearing old text when one came through at the same time so was also deleted.

Can someone please tell me how to retrieve deleted text. i was clearing old texts when a new one came through at the same time and was deleted also. My last update was iOS 8.1.2

You restore from a backup that was created after the text was received but before it was deleted.
But if you literally deleted it right after it came in, then it's not recoverable. Have the other person resend the text.

Can someone explain the new "Document Model" for open/save?

Upgraded directly from OSX Snow Leopard Server to OSX Mountain Lion Server.
Obviously, there are quite a few changes in how the new OS deals with file management.
NOTE: For users with the non-Server version of Mountain Lion, when you enable RAID (Mirror) on your drives, you cannot create a Recovery Partition. So, no Time Machine backups, and "Revert To" has nothing to revert to. Nor does automatic backups work.
So, what should be my process for managing files? Specifically, what is my recommended workflow in place of "Save" and "Save As" so that I do not rewrite over existing files and can save copies with a revised file name to the same or a different directory?

If you Duplicate, then Save… asks for file name. ..."
An extra-step workflow that mimics the old "Save As" command. I think I understand this.
If you just Save a document you are working on, it saves just as it always did. However, if Versions is supported, Save forces a new version as opposed to the normal version interval. ..."
This is what worries me with users. This will re-write the original file with changes incorporated, yet OSX users (who have adopted the new Mountain Lion workflow on standard OS machines) may be under the impression that an older version could be recovered, which it cannot.
I need to have a clear understanding of what to explain to users to avoid issues with files "disappearing" when they believe they were protected by Versioning.

Can someone explain a stack and que for me?

?

A queue: you get in line at a cafe. After everyone
in front of you has been seated, then you get seated.
If your last in line, you're last to be seated. If
f you're second in line, you're second to be seated.
A stack: suppose you are last in line to get into an
elevator. When the doors open, everyone piles in,
and you just manage to squeeze in before the doors
shut. (This elevator only stops at the top floor.)
When the elevator doors open, you are the fist one
e out. You entered last, you exited first. The
first person to enter the elevator is the last one
out.That's a brilliant way to teach a beginner. Bravo. Encore.
That is probably the best reply I have seen at this site for a long time...
now, if only you were a babe instead of a stud...
:)

Please can someone explain how to delete email addresses? I have people who when I type in their name it comes up with the correct email address but then when you hit return to confirm it promptly changes the name to someone else (always the same someone

Please can someone explain how to delete and email address that when typed in brings up one name but when you hit return to confirm it jumps to another name. I can't find them in my contacts list but they do come up when you type the first few letters of a name.
EG If I type xyz and the name of the person comes up, when I press return to confirm that's the one I want then it jumps to [email protected], always the same def address.
I can't fathom it out.
Thanks
Terri

Try this:
Start a new email. In the To address bar, type in xyz like you normally do, press return to confim, and when the address you want to remove shows up in the address bar, move your cursor over the address you want to delete.
A small triangle next to the name will show up. click on it, a drop down menu will open, click Remove from Previous Recipients List. Then do the drop down menu again and Remove Address.
Good luck.

Can someone explain the code for having the Accordion panels closed?

I located the answer to my own question (how to get all the accordion panels to remain closed when the browser opens) but I still don't understand the answer. Can someone explain this?
This feature is only supported when using variable height panels, so you must pass a false into the Accordion's constructor for the "useFixedPanelHeights" constructor options, and a -1 for the "defaultPanel" option:
<script type="test/javascript">
var acc1 = new Spry.Widget.Accordion ("Acc1", { useFixPanelHeights: false, defaultPanel: -1});
</script>
Angela

GPDMTR25 wrote:
I located the answer to my own question (how to get all the accordion panels to remain closed when the browser opens) but I still don't understand the answer. Can someone explain this?
This feature is only supported when using variable height panels, so you must pass a false into the Accordion's constructor for the "useFixedPanelHeights" constructor options, and a -1 for the "defaultPanel" option:
<script type="test/javascript">
var acc1 = new Spry.Widget.Accordion ("Acc1", { useFixPanelHeights: false, defaultPanel: -1});
</script>
Angela
Hi Angela,
You are right, the only way it will work is by setting the fixed height to false. As for the for the default panel option, -1 is not a panel and if you had 3 panels we could have used the number 3 (panel1 = 0) or 99 or whatever as long as there is no panel with that number. If we had used the number 1 for instance, then the 2nd panel would be opened by default.
Hope this helps.
Ben

I have downloaded ios 5.1.1 and the wifi has stop working or it would stay on for less then 20min its only 9 months old can someone explain what is happening and if some know how to fix it

I have downloaded ios 5.1.1 and the wifi has stop working or it would stay on for less then 20min its only 9 months old can someone explain what is happening and if some know how to fix it

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

Can someone explain purchasing, activating and signing up for iPhone.

Hi, iPhone hits UK in November and I'd like to be prepared. Can someone explain to me how it's going to work. In the USA where do you buy the phone - the Apple store, and what do you do just walk in a buy the actual phone as if it were an iPod? And then how does activation work? What is it, just registering the iPhone with Apple or signing up with the network provider? What stops you from just buying the phone and putting another AT&T or O2 sim in and not signing up for one of the contracts?

Presuming that it will look pretty much the same as it did for US customers, it will be something like this..
You walk into your local Apple store and purchase an iPhone, or you can order one through the UK online Apple store (or, presumably, O2 will sell them in their local shops).
You connect the iPhone to any computer which meets the minumum system requirements. It will recognize a new, unactivated iPhone and take you through the activation, which includes:
1. Entering your name, address, and payment info
2. Create an iTunes Music Store account if you do not already have one
3. Select which type of call plan you want (how many call minutes, how many text messages, etc)
4. Specifying whether you want a new number assigned or want to port your number from another provider (assuming this can be done in the UK)
You will then wait while the activation is completed, which can take several minutes. Once your phone is activated you will be able to make calls, send text messages, and use all the other functions of the iPhone, including syncing your contacts, calendars, and music to it. If you are porting a number from another service, once the port is complete you will be able to receive calls. If you are being assigned a new phone number, you will be able to receive calls right away.

Sometimes, my iPhone displays a "E" instead of "3G". Can someone explain me why and what it means ? Thx for ur help !

Sometimes, my iPhone displays a "E" instead of "3G". Can someone explain me why and what it means ? Thx for ur help !

You are connected to an EDGE network. See page 17 in the "Basics" section of the User Guide.
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this.

I have a lot of various book mark folders with websites contained within each folder. I am able to sort the websites within each folder alphabetically by name but I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this other than manually dragging them as this is extremely hard for me due to the fact that I am a quadriplegic with limited hand movement dexterity

Bookmark folders that you created are in the Bookmarks Menu folder. "Sort" that folder.
http://kb.mozillazine.org/Sorting_bookmarks_alphabetically

Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.

Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.

When you enable photo stream on your Mac, in imports photos currently in your photo stream. However, photo stream only keeps photos for 30 days, even though up to 1000 photos will remain on your device until you delete them. When you enable photo stream on your Mac, you will only receive photos added in the last 30 days, as the others are no longer in your photo stream.
If you want to get all your old photos on your Mac, save them to your camera roll (if they aren't already there) by opening your photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll. Once they are in your camera roll, import them to your Mac as explained here: http://support.apple.com/kb/HT4083.
Another option would be to create a shared photo stream containing the older photos and invite yourself (as explained here: http://help.apple.com/icloud/#mmc0cd7e99). Then check Shared Photo Streams in iPhoto>Preferences>Photo Stream and you will see this shared photo stream on your Mac.

Can someone explain how to set up an administrator account so that I can have my phone and my daughters have separate apple ids?

I mistakenly updated to the latest version of iOS and ever since then I can send messages to my daughter and I receive them but she does not. She has an iphone also and her phone is under my apple id also. Someone told me that I could set up an Administrator Account so that she can still be under my account but she has her own ID and that will fix the problem with text/imessages. I can't find anything on the website that explains how to do that. Can someone explain that to me?
Thanks!

I'm still not clear on what you are trying to accomplish. If you have an iPhone and she does as well you should have your own Apple IDs.
If you want to pay for any purchases she makes with her phone as far as apps/music goes than that is what Family sharing is for.
In my case my Wife and I are setup for family sharing. When she purchases music/apps it charges my credit card. This setup also allows me to share my past music/app purchases with her and vice versa.

Can someone tell me how to delete EditRegion4.

Can someone tell me how to delete an "exra" EditRegion4" i have in Dreamweaver CS4? I have 5 total edit regions on each page, but somehow I have 2 of the EditRegion4 on one of the poem pages. The one region4 is total empty so since I can't seem to delete it, I wondered if I could change the name to EditRegion6 on the Main Tempklate page or if I did would that get rid of every page on the site? It is correct on the main template and all the other pages on the site. I thought of starting all over again, but I have about 30 individual poems with various other things so it would be a lot of hours of work which I don't have.
This one page is the only one it shows up on.This is what the code looks like. It is light in color so not allowing me to go in and delete the code.
name="EditRegion4" --></h3><table width="100%" border="1" cellpadding="0" cellspacing="0">
Can you also tell me how to get the Target and Title in the Properties menu to show up in full again? I can see the Class and Link portion, but the Title and Target rectangles are missing or faded. I am self taught so please help if you can. I have a non-profit ministry so I cannot afford to pay someone to help me. Thanks for any help.

This is screenshot in Dreamweaver of both issues. As you can see above the page properties, the Title and Target are blanked out. It is this way on every page I try to work with.
You were right about the EditRegion 4. It is back again as you can see both of them! Here is a portion of the the code on that template page. It is not on any of the other pages and only this one. As you can see I have a lot of poems on this page so I am only emailing a portion of the code. I highlighted it below, but on the actual page it is faded and unable to be edited.
      </h3></td>
      <td width="834" align="center" bgcolor="#FFF6C8"><h3></h3><table width="100%" border="1" cellpadding="0" cellspacing="0">
        <tr>
          <th colspan="5" align="center" bgcolor="#FFF6C8"><h5>INSPIRATIONAL POEMS OF HOPE <br />
            <span class="specifictext">(Click on each picture to enlarge for reading.) </span></h5></th>
        </tr>
        <tr class="title">
          <td width="20%" align="center" bgcolor="#E9C879"><h5>An Uphill Climb</h5></td>
          <td align="center" bgcolor="#E9C879"><h5>Bigger Plans</h5></td>
          <td align="center" bgcolor="#E9C879"><h5>Darkness Surrounds You</h5></td>
          <td align="center" bgcolor="#E9C879"><h5>Do Not Feel Lonely</h5></td>
          <td align="center" bgcolor="#E9C879"><h5>Don't Give Up On Jesus</h5></td>
        </tr>
        <tr>
          <td align="center"><h5><a href="../Sue's Root/Images/Poems/Hope Poems/An Uphill Climb L.jpg"><img src="../Sue's Root/Images/Poems/Hope Poems/An Uphill Climb S .jpg" width="142" height="176" alt="An Uphillm Climb" /></a></h5></td>
          <td align="center"><h5><a href="../Sue's Root/Images/Poems/Hope Poems/Bigger Plans L.jpg"><img src="../Sue's Root/Images/Poems/Hope Poems/Bigger Plans S.jpg" width="142" height="176" alt="Bigger Plans" /></a></h5></td>
          <td align="center"><h5><a href="../Sue's Root/Images/Poems/Hope Poems/Darkness Surrounds You L.jpg"><img src="../Sue's Root/Images/Poems/Hope Poems/Darkness Surrounds You S.jpg" width
Thanks for any help.

Trying to understand RSTP - Please can someone explain this?

Hi Group
I am still confused about how RSTP is implemented. From what i understand the major difference is that STP
used Timers for Loop prevention whereas RSTP coordinates between neighbors via messages (proposal/aggreement) to turn on links
more quickly after topology changes and is "timer free".
However, I have not noticed any difference in the configuration from the legacy STP
configurations and the RSTP configuration on cisco devices. Or are there any differences??
I have read in documentation that RSTP natively includes features like UplinkFast, BackboneFast and PortFast. So are these features now obsolete
and not needed to be configured if you are running RSTP. (Although i have seen Portfast still configured along with RSTP on many switches)
Also can someone explain the below Points from Cisco Documentation
1) should STP be disabled on edge ports all together as suggested below?
"STP edge ports are bridge ports that do not need STP enabled, where loop protection is not needed out
of that port or an STP neighbor does not exist out of that port. For RSTP, it is important to disable STP
on edge ports, which are typically front-side Ethernet ports, using the command bridge
bridge-group-number spanning-disabled on the appropriate interface. If RSTP is not disabled on edge
ports, convergence times will be excessive for packets traversing those ports."
2) It seems RSTP relies on duplex setting to determine inter-switch links. What is the configuration to explicitly
configure RSTP link types? (I couldnt find this in the documentation)
"RSTP can only achieve rapid transition to the forwarding state on edge ports and on point-to-point links.
The link type is automatically derived from the duplex mode of a port. A port that operates in fullduplex
is assumed to be point-to-point, while a half-duplex port is considered as a shared port by
default. This automatic link type setting can be overridden by explicit configuration. In switched
networks today, most links operate in full-duplex mode and are treated as point-to-point links by RSTP.
This makes them candidates for rapid transition to the forwarding state."
Also i am a bit rough on my RSTP knowledge even after skimming a few Cisco documents. Can someone please explain this in simple way.
Thanks in advance

to configure it on a device:-
spanning-tree mode rapid-pvst
PortFast/UplinkFast & BackboneFast were cisco "Enhancements" to 802.1d STP. RSTP just incorperates them. If you want to configure portfast, the command is still "spanning-tree portfast"
OK
1) That is your choice - I have bitter experiance of users/IT admins just plugging hubs/switches in when ever they can. Also cabling the switch back to itself creating a cabled loop. So my advice to you is to leave STP enabled on all switch ports, BUT enable BPDUGuard - this is a life saver, if you have configured portfast.
2) duplex auto! or duplex full (overiding)
I really suggest that you read the 802.1d standard, once you understand normal spanning-tree - RSTP will come to you.
http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html')">http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html')">http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html')">http://www.cisco.com/en/US/tech/tk389/tk621/tsd_technology_support_protocol_home.html
http://en.wikipedia.org/wiki/Spanning_tree_protocol')">http://en.wikipedia.org/wiki/Spanning_tree_protocol')">http://en.wikipedia.org/wiki/Spanning_tree_protocol')">http://en.wikipedia.org/wiki/Spanning_tree_protocol
HTH>

Can someone explain me this?

Can someone explain me why LabVIEW embeds the graphic in sheet 1 if i specify location as "prueba"? The vi is for LV 5.0.1f1 and Excel 2000, it just creates a workbook, adds some data and creates a chart. I've tried to ask a NI engineer but i receive no answer.
Thanks,
Gorka
Attachments:
Untitled.llb ‏430 KB

Hi Gorka,
I am not sure if this helps but the help file for the add Sheets method says
"Add Method (Sheets Collection)
Creates a new worksheet, chart, or macro sheet.
Syntax
expression.Add(Before, After, Count, Type)
expression Required. An expression that returns a Sheets object.
Before Optional Variant. An object that specifies the sheet before which the new sheet is added.
After Optional Variant. An object that specifies the sheet after which the new sheet is added.
Count Optional Variant. The number of sheets to be added. The default value is one.
Type Optional Variant. Specifies the sheet type. Can be one of the following XlSheetType constants: xlWorksheet, xlChart, xlExcel4MacroSheet, or xlExcel4IntlMacroS
heet. The default value is xlWorksheet.
Remarks
If Before and After are both omitted, the new sheet is inserted before the active sheet.
*******" (I added asterisks for emphesis).
the help for the "location method" says,
"Add Method (Sheets Collection)
Creates a new worksheet, chart, or macro sheet.
Syntax
expression.Add(Before, After, Count, Type)
expression Required. An expression that returns a Sheets object.
Before Optional Variant. An object that specifies the sheet before which the new sheet is added.
After Optional Variant. An object that specifies the sheet after which the new sheet is added.
Count Optional Variant. The number of sheets to be added. The default value is one.
Type Optional Variant. Specifies the sheet type. Can be one of the following XlSheetType constants: xlWorksheet, xlChart, xlExcel4MacroSheet, or xlExcel4IntlMacroSheet. The default value is xlWorksheet.
Remarks
If Before and After
are both omitted, the new sheet is inserted before the active sheet.
Just trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Can Someone Explain "Skipped Due to Deletion" for Individual Shows?

Similar Messages

Maybe you are looking for